Orthopalladation of phosphorus ylides in endo position with bidentate ligands

The ortho-metallated complexes [Pd₂{κ²(C,C)-C₆H₄(PPh₂CHC(O)C₆H₅R}₂(μ-Cl)₂] (R = Ph (1a), NO₂ (1b), Br (1c)) were prepared by refluxing equimolar mixtures of Ph₃PCHC(O)C₆H₅R, (R = Ph, NO₂, Br) and Pd(OAc)₂ in MeOH, followed by an excess of NaCl. The dinuclear complexes (1a-1c) react with silver trifluoromethylsulfonate and bidentate ligands [L = bipy (2,2′-bipyridine), phen (phenanthroline), dppe (bis(diphenylphosphino)ethane), dppp (bis(diphenylphosphino)propane)] giving the mononuclear stabilized orthopalladated complexes in endo position [Pd{κ²(C,C)-C₆H₄(PPh₂CHC(O)R}L](OTf) [R = Ph, L = phen (2a), bipy (3a), dppe (4a), dppp (5a); R = NO₂, L = phen (2b), bipy (3b), dppe (4b), dppp (5b); R = Br, L = phen (2c), bipy (3c), dppe (4c), dppp (5c); OTf = trifluoromethylsulfonate anion]. Orthometalation and ylidic C-coordination are demonstrated by an X-ray diffraction study of 2c and 3c. In the structures, the palladium atom shows a slightly distorted square-planar coordination geometry.     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.     

Investigation on coordination modes of organotin(IV) complexes with 6-thiopurine and related ligands

The organotin(IV) complexes R₂Sn(tpu)₂ · L [L = 2MeOH, R = Me (1); L = 0: R = n-Bu (2), Ph (3), PhCH₂ (4)], R₃Sn(Hthpu) [R = Me (5), n-Bu (6), Ph (7), PhCH₂ (8)] and (R₂SnCl)₂ (dtpu) · L [L = H₂O, R = Me (9); L = 0: R = n-Bu (10), Ph (11), PhCH₂ (12)] have been synthesized, where tpu, Hthpu and dtpu are the anions of 6-thiopurine (Htpu), 2-thio-6-hydroxypurine (H₂thpu) and 2,6-dithiopurine (H₂dtpu), respectively. All the complexes 1-12 have been characterized by elemental, IR, ¹H, ¹³C and ¹¹⁹Sn NMR spectra analyses. And complexes 1, 2, 7 and 9 have also been determined by X-ray crystallography, complexes 1 and 2 are both six-coordinated with R₂Sn coordinated to the thiol/thione S and heterocyclic N atoms but the coordination modes differed. As for complex 7 and 9, the geometries of Sn atoms are distorted trigonal bipyramidal. Moreover, the packing of complexes 1, 2, 7 and 9 are stabilized by the hydrogen bonding and weak interactions.     

Syntheses and characterization of mono and dinuclear complexes of platinum group metals bearing benzene-linked bis(pyrazolyl)methane ligands

Reaction of the benzene-linked bis(pyrazolyl)methane ligands, 1,4-bis{bis(pyrazolyl)-methyl}benzene (L1) and 1,4-bis{bis(3-methylpyrazolyl)methyl}benzene (L2), with pentamethylcyclopentadienyl rhodium and iridium complexes [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂ (M = Rh and Ir) in the presence of NH₄PF₆ results under stoichiometric control in both, mono and dinuclear complexes, [(η⁵-C₅Me₅)RhCl(L)]⁺ {L = L1 (1); L2 (2)}, [(η⁵-C₅Me₅)IrCl(L)]⁺ {L = L1 (3); L2 (4)} and [{(η⁵-C₅Me₅)RhCl}₂(μ-L)]²⁺ {L = L1 (5); L2 (6)}, [{(η⁵-C₅Me₅)IrCl}₂(μ-L)]²⁺ {L = L1 (7); L2 (8)}. In contrast, reaction of arene ruthenium complexes [(η⁶­arene)Ru(μ-Cl)Cl]₂ (arene = C₆H₆, p-ⁱPrC₆H₄Me and C₆Me₆) with the same ligands (L1 or L2) gives only the dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(μ-L)]²⁺ {L = L1 (9); L2 (10)}, [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(μ-L)]²⁺ {L = L1 (11); L2 (12)} and [{(η⁶-C₆Me₆)RuCl}₂(μ-L)]²⁺ {L = L1 (13); L2 (14)}. All complexes were isolated as their hexafluorophosphate salts. The single-crystal X-ray crystal structure analyses of [7](PF₆)₂, [9](PF₆)₂ and [11](PF₆)₂ reveal a typical piano-stool geometry around the metal centers with six-membered metallo-cycle in which the 1,4-bis{bis(pyrazolyl)-methyl}benzene acts as a bis-bidentate chelating ligand.     

Copper(II) complexes of tetradentate N2S2 donor sets: Synthesis,crystal structure characterization and reactivity

Two mononuclear and one dinuclear copper(II) complexes, containing neutral tetradentate NSSN type ligands, of formulation [Cu^II(L¹)Cl]ClO₄ (1), [Cu^II(L²)Cl]ClO₄ (2) and [Cu^II₂(L³)₂Cl₂](ClO₄)₂ (3) were synthesized and isolated in pure form [where L¹ = 1,2-bis(2-pyridylmethylthio)ethane, L² = 1,3-bis(2-pyridylmethylthio)propane and L³ = 1,4-bis(2-pyridylmethylthio)butane]. All these green colored copper(II) complexes were characterized by physicochemical and spectroscopic methods. The dinuclear copper(II) complex 3 changed to a colorless dinuclear copper(I) species of formula [Cu^I₂(L³)₂](ClO₄)₂,0.5H₂O (4) in dimethylformamide even in the presence of air at ambient temperature, while complexes 1 and 2 showed no change under similar conditions. The solid-state structures of complexes 1, 2 and 4 were established by X-ray crystallography. The geometry about the copper in complexes 1 and 2 is trigonal bipyramidal whereas the coordination environment about the copper(I) in dinuclear complex 4 is distorted tetrahedral.     

Cationic half-sandwich complexes (Rh, Ir, Ru) containing 2-substituted-1,8-naphthyridine chelating ligands: Syntheses, X-ray structure analyses and spectroscopic studies

Reactions of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = C₆H₆, p-ⁱPrC₆H₄Me) and [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂ (M = Rh, Ir) with 2-substituted-1,8-naphthyridine ligands, 2-(2-pyridyl)-1,8-naphthyridine (pyNp), 2-(2-thiazolyl)-1,8-naphthyridine (tzNp) and 2-(2-furyl)-1,8-naphthyridine (fuNp), lead to the formation of the mononuclear cationic complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ {L = pyNp (1); tzNp (2); fuNp (3)}, [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ {L = pyNp (4); tzNp (5); fuNp (6)}, [(η⁵-C₅Me₅)Rh(L)Cl]⁺ {L = pyNp (7); tzNp (8); fuNp (9)} and [(η⁵-C₅Me₅)Ir(L)Cl]⁺ {L = pyNp (10); tzNp (11); fuNp (12)}. All these complexes are isolated as chloro or hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV/Vis spectroscopy. The molecular structures of [1]Cl, [2]PF₆, [4]PF₆, [5]PF₆ and [10]PF₆ have been established by single crystal X-ray structure analysis.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

F NMR spectroscopy as useful tool for determining the structure in solution of coordination compounds of MF5 (M = Nb, Ta)

The salts [S(NMe₂)₃][MF₆] (M = Nb, 2a; M = Ta, 2b) and [S(NMe₂)₃][M₂F₁₁] (M = Nb, 2c; M = Ta, 2d) have been prepared by reacting MF₅ (M = Nb, 1a; M = Ta, 1b) with [S(NMe₂)₃][SiMe₃F₂] (TASF reagent) in the appropriate molar ratio. The solid state structure of 2b has been ascertained by X-ray diffraction. The 1:1 molar ratio reactions of 1a with a variety of organic compounds (L) give the neutral adducts NbF₅L [L = Me₂CO, 3a; L = MeCHO, 3b; L = Ph₂CO, 3c; L = tetrahydrofuran (thf), 3d; L = MeOH, 3e; L = EtOH, 3f; L = HOCH₂CH₂OMe, 3g; L = Ph₃PO, 3h; L = NCMe, 3i] in good yields. The complexes MF₅L [M = Nb, L = HCONMe₂, 3j; M = Nb, L = (NMe₂)₂CO, 3k; M = Ta, L = (NMe₂)₂CO, 3l; M = Nb, L = OC(Me)CHCMe₂, 3m] have been detected in solution in admixture with other unidentified products, upon 2:1 molar reaction of 1 with the appropriate reagent L. The ionic complexes [NbF₄(tht)₂][NbF₆], 4a, and [NbF₄(tht)₂][Nb₂F₁₁], 4b, have been obtained by combination of tetrahydrothiophene (tht) and 1a, in 1:1 and 2:3 molar ratios, respectively. The treatment of 1 with a two-fold excess of L leads to the species [MF₄L₄][MF₆] [M = Nb, L = HCONMe₂, 5a; M = Ta, L = HCONMe₂, 5b; M = Nb, L = thf, 5c; M = Ta, L = thf, 5d; M = Nb, L = OEt₂, 5e]. The new complexes have been fully characterised by NMR spectroscopy. Moreover, the revised ¹⁹F NMR features of the known compounds MF₅L [M = Ta, L = Me₂CO, 3n; M = Ta, L = Ph₂CO, 3o; M = Ta, L = MePhCO, 3p; M = Ta, L = thf, 3q; M = Nb, L = CH₃CO₂H, 3r; M = Nb, L = CH₂ClCO₂H, 3s; M = Ta, L = CH₂ClCO₂H, 3t], TaF₄(acac), TaF₄(Me-acac) and [TaF(Me-acac)₃][TaF₆] (Me-acac = methylacetylacetonato anion) are reported.     

Synthesis, characterization and luminescence study of dialkyl[1-arylmethyleneimino-2-naphthonato]gallium complexes: Crystal structure of dimethyl[1-(2-pridyl) methyleneimino-2-naphthonato]gallium

Eight dialkylgallium complexes of type R₂GaL [(M = Me, L = 1-(2-pyridyl)methyleneimino-2-naphthonato (1), M = Et, L = 1-(2-pyridyl)methyleneimino-2-naphthonato (2), M = Me, L = 1-phenylmethyleneimino-2-naphthonato (3), M = Et, L = 1-phenylmethyleneimino-2-naphthonato (4), M = Me, L = 1-(p-methoxylphenyl)methyleneimino-2-naphthonato (5), M = Me, L = 1-(3,4-dimethoxylphenyl)methyleneimino-2-naphthonato (6), M = Me, L = 1-naphthylmethyleneimino-2-naphthonato (7), M = Me, L = 1-naphthylmethyleneimino-2-naphthonato (8)) have been synthesized by reaction of trialkylgallium with appropriate 1-arylmethyleneimino-2-naphthols. The complexes have been characterized by elemental analysis, ¹H NMR, IR and mass spectrometry. Structure of dimethyl[1-(2-pyridyl)methyleneimino-2-naphthonato]gallium (1) has been determined by X-ray single crystal analysis. Ga atom is five coordinate in the structure. Photoluminescent properties have been measured. The maximum emission wavelengths are in the range of 358 and 412 nm with the intensity of 13-325 a.u. The electroluminescent properties of 3, 5, 7 and 8 have been measured. The maximum emission wavelengths are in the range of 450 and 480 nm.     

Rhenium and technetium tricarbonyl complexes anchored by 5-HT1A receptor-binding ligands containing P,O/N donor atom sets

The (2-methoxyphenyl)piperazine pharmacophore, a part of the WAY 100635 structure, has been functionalized with phosphinoarylbenzylamide or phosphinoarylbenzylamine chelator groups using propylene or hexylene alkyl chains as linkers (L2-L4). These heterofunctionalized phosphines bearing an arylpiperazine moiety have been used to stabilize rhenium tricarbonyl complexes of the type [Re(CO)₃Br(κ²-L)] (4, L = L2; 5, L = L3; 6, L = L4), which have been fully characterized, including by X-ray crystallographic analysis in the case of compounds 4 and 5. These monomeric complexes are six-coordinate, displaying a distorted octahedral coordination geometry with a facial arrangement of the carbonyl groups. The other three remaining positions are occupied by a bromide and by the bidentate heterofunctionalized phosphine, which coordinates through the phosphorus and the oxygen atom or through the phosphorus and the nitrogen atom in 4 and 5, respectively. The ^99mTc complexes (3a-6a) were also prepared and their characterization established by comparative HPLC, using the Re complexes as surrogates. The in vitro binding affinity for the 5HT_1A receptor subtype and the selectivity against the 5HT_2A receptors for the rhenium complexes were determined. Compound 3 is the only one which presents a reasonable affinity and selectively towards 5HT_1A (IC₅₀ = 20 nM) and 5HT_2A (IC₅₀ = 4680 nM) receptors, respectively. When the spacer length between the chelate unit and receptor binding domain increased and/or the amide group in the chelator was replaced by a secondary amine unacceptable affinity values for 5HT_1A receptors (IC₅₀ = 200-1100 nM) and lost of selectivity were observed.     

Syntheses and characterization of [(η-C6Me6)Ru(μ-N3)(X)]2 (X = N3 and Cl) complexes and their reactions towards mono- and bidentate ligands

The reaction of the complex [{(η⁶-C₆Me₆)Ru(μ-Cl)Cl}₂] 1 with sodium azide ligand gave two new dimers of the composition [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2 and [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3, depending upon the reaction conditions. Complex 3 with excess of sodium azide in ethanol yielded complex 2. These complexes undergo substitution reactions with monodentate ligands to yield monomeric complexes of the type [(η⁶-C₆Me₆)Ru(X)(N₃)(L)] {X = N₃, Cl, L = PPh₃ (4a, 9a); PMe₂Ph (4b, 9b); AsPh₃ (4c, 9c); X = N₃, L = pyrazole (Hpz) (5a); 3-methylpyrazole (3-Hmpz) (5b) and 3,5-dimethyl-pyrazole (3,5-Hdmpz) (5c)}. Complexes 2 and 3 also react with bidentate ligands to give bridging complexes of the type [{(η⁶-C₆Me₆)Ru(N₃)(X)]₂(μ-L)} {X = N₃, Cl, L = 1,2-bis(diphenylphosphino)methane (dppm) (6, 10); 1,2-bis(diphenylphosphino)ethane (dppe) (7, 11); 1,2-bis(diphenylphosphino)propane (dppp) (8, 12); X = Cl, L = 4,4-bipyridine (4,4′-bipy) (13)}. These complexes were characterized by FT-IR and FT-NMR spectroscopy as well as by analytical data.The molecular structures of the representative complexes [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2, [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3,[(η⁶-C₆Me₆)Ru(N₃)₂(PPh₃)] 4a and [{(η⁶-C₆Me₆)Ru(N₃)₂}₂ (μ-dppm)] 6 were established by single crystal X-ray diffraction studies.     

Diiron-aminocarbyne complexes with amine or imine ligands: C-N coupling between imine and aminocarbyne ligands promoted by tolylacetylide addition to [Fe2{μ-CN(Me)R}(μ-CO)(CO)(NHCPh2)(Cp)2][SO3CF3]

A terminally coordinated CO ligand in the complexes [Fe₂{μ-CN(Me)R}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (R = Me, 1a; R = Xyl, 1b; Xyl = 2,6-Me₂C₆H₃), is readily displaced by primary and secondary amines (L), in the presence of Me₃NO, affording the complexes [Fe₂{μ-CN(Me)R}(μ-CO)(CO)(L)(Cp)₂][SO₃CF₃] (R = Me, L = NH₂Et, 4a; R = Xyl, L = NH₂Et, 4b; R = Me, L = NH₂Prⁱ, 5a; R = Xyl, L = NH₂Prⁱ, 5b; R = Xyl, L = NH₂C₆H₁₁, 6; R = Xyl, L = NH₂Ph, 7; R = Xyl, L = NH₃, 8; R = Me, L = NHMe₂, 9a; R = Xyl, L = NHMe₂, 9b; R = Xyl, = NH(CH₂)₅, 10). In the absence of Me₃NO, NH₂Et gives addition at the CO ligand of 1b, yielding [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(O)NHEt}(Cp)₂] (11). Carbonyl replacement is also observed in the reaction of 1a-b with pyridine and benzophenone imine, affording [Fe₂{μ-CN(Me)R}(μ-CO)(CO)(L)(Cp)₂][SO₃CF₃] (R = Me, L = Py, 12a; R = Xyl, L = Py, 12b; R = Me, L = HNCPh₂, 13a; R = Xyl, L = HNCPh₂, 13b). The imino complex 13b reacts with p-tolylacetylide leading to the formation of the μ-vinylidene-diaminocarbene compound [Fe₂{μ-η¹:η²- CC(Tol)C(Ph)₂N(H)CN(Me)(Xyl){(μ-CO)(CO)(Cp₂)] (15) which has been studied by X-ray diffraction.     

Rh-complexes of ditopic bis(pyrazol-1-yl)borate ligands: Assessment of their catalytic activity towards phenylacetylene polymerization

Two dinuclear Rh^I-cyclooctadiene complexes [1,4-(cod)Rh(B(R’)pz₂)-C₆H₄-(B(R’)pz₂)Rh(cod)], linked by a ditopic scorpionate ligand, have been prepared and fully characterized (R′ = Ph (2), C₆F₅ (2^F); pz = pyrazolide). Both compounds were tested as catalysts for phenylacetylene polymerization but showed no catalytic activity. Attempts at the synthesis of corresponding complexes of the sterically more demanding ligands (R′ = Ph (4), C₆F₅ (4^F); pz^Ph = 3-phenylpyrazolide) resulted in B-N bond cleavage and formation of the dinuclear complex [(cod)Rh(μ-pz^Ph)₂Rh(cod)] (5). Complex 5 proved to be an efficient catalyst for the preparation of highly stereoregular head-to-tail cis-transoidal poly(phenylacetylene).     

The (phosphino)tetraphenylborate ligand in ruthenium-arene chemistry

The synthesis of a series of anionic half-sandwich ruthenium-arene complexes [E][RuCl₂(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (E = Bu₄N⁺: R = Ph, 1a, ⁱPr, 1b or Cy, 1c; E = bis(triphenylphosphine)iminium or PNP⁺: R = Ph, 1a′, ⁱPr, 1b′ or Cy, 1c′) are reported. X-ray crystallographic studies of 1a′ and 1b′ confirmed the three-legged piano-stool coordination geometry. In solution, complexes 1a-c and 1a′-c′ are proposed to form monomer-dimer equilibria as a result of chloride ligand dissociation. Complexes 1a-c and 1a′-c′ also form the formally neutral zwitterionic complexes [RuCl(L)(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (L = pyridine: R = Ph, 2a, ⁱPr, 2b or Cy, 2c; L = MeCN: R = Ph, 3a, ⁱPr, 3b or Cy, 3c) via chloride ligand abstraction using AgNO₃ or MeOTf.     

Preparation, structural characterisation and electrochemical properties of iron(0) and tungsten(0) carbonyl complexes with 1-(diphenylphosphanyl)-1′-vinylferrocene and 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene as P-monodentate ligands

A new organometallic phosphanylalkene, 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene (2) was prepared and—together with 1-(diphenylphosphanyl)-1′-vinylferrocene (1)—studied as a ligand in iron- and tungsten-carbonyl complexes. The following complexes featuring the mentioned phosphanylalkenes as P-monodentate donors were isolated and characterised by spectral methods: [Fe(CO)₄(L-κP)] (4, L = 1; 5, L = 2) and trans-[W(CO)₄(L-κP)₂] (6, L = 1; 7, L = 2). In addition, the solid-state structures of 4 and 6 have been determined by single-crystal X-ray diffraction and the electrochemical properties of compounds 1, 2, 4 and 6 were studied by cyclic voltammetry at platinum electrode.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Self-assembly syntheses and crystal structures of triorganotin(IV) pyridinecarboxylate: 1D polymers and a 42-membered macrocycle

A series of new triorganotin(IV) pyridinecarboxylates with 6-hydroxynicotinic acid (6-OH-3-nicH), 5-hydroxynicotinic acid (5-OH-3-nicH) and 2-hydroxyisonicotinic acid (2-OH-4-isonicH) of the types: [R₃Sn (6-OH-3-nic)·L]_n (I) (R = Ph, L = Ph·EtOH, 1; R = Bn, L = H₂O·EtOH, 2; R = Me, L = 0, 3; R = n-Bu, L = 0, 4), [R₃Sn (5-OH-3-nic)]_n (II) (R = Ph, 5; R = Bn, 6; R = Me, 7; R = n-Bu, 8), [R₃Sn (2-OH-4-isonic·L)]_n (III) (R = Bn, 9, L = MeOH; R = Me, L = 0, 10; R = Ph, 11, L = 0.5EtOH) have been synthesized. All the complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy analyses. Among them, except for complexes 5 and 6, all complexes were also characterized by X-ray crystallography diffraction analysis. Crystal structures show that complexes 1-10 adopt 1D infinite chain structures which are generated by the bidentate O, O or N, O and the five-coordinated tin centers. Significant O-H?O, and N-H?O intermolecular hydrogen bonds stabilize these structures. Complex 11 is a 42-membered macrocycle containing six tin atoms, and forms a 2D network by intermolecular N-H?O hydrogen.     

Cytotoxic half-sandwich rhodium(III) complexes: Polypyridyl ligand influence on their DNA binding properties and cellular uptake

The DNA binding of polypyridyl (pp) (η⁵-C₅Me₅)Rh^III complexes of the types [(η⁵-C₅Me₅)RhCl(pp)](CF₃SO₃) (2-6) (pp = bpy, phen, dpq, dppz, dppn), [(η⁵-C₅Me₅)Rh{(Me₂N)₂CS}(pp)](CF₃SO₃)₂ (7-9) (pp = dpq, dppz, dppn) and [(η⁵-C₅Me₅)Rh(L)(pp)](CF₃SO₃) (10) (L = C₆H₅S⁻) and (11) (L = C₁₀H₇S⁻) has been studied by UV/Vis spectroscopy, circular dichroismus and viscosity measurements. Complexes 3-11 are cytotoxic towards the human MCF-7 breast and HT-29 colon cancer cell lines and exhibit IC₅₀ values in the range 0.56-10.7 μM. Stable intercalative binding into CT-DNA is indicated for the dpq and dppz complexes by large increases ΔT_m of 6-12 °C in the DNA thermal denaturation temperature for r = [complex]/[DNA] = 0.1 and by induced CD bands and large viscosity increases. In contrast, significant DNA lengthening is not observed after incubation of the biopolymer with the dppn complexes 2 and 9 at molar ratios of r < 0.08. Pronounced hypochromic shifts for the π-π^∗ transitions of the dppn ligands in the range 320-425 nm indicate the possible presence of surface stacking. The in vitro cytotoxicities of the chloro complexes 4-6 and the (Me₂N)₂CS complexes 7-9 are dependent on the size of the polypyridyl ligand with IC₅₀ values decreasing in the order dpq > dppz > dppn. For instance, IC₅₀ values of 5.3, 1.5 and 0.91 μM were determined for 7-9 against MCF-7 cells. Rapid Cl⁻/H₂O exchange leads the formation of aqua dications for 4-6, whose levels of cellular uptake and cytotoxicities are similar to those established for 7-9. Intramolecular interactions between the aromatic thiolate and dppz ligands of 10 and 11 prevent significant DNA intercalation. X-ray structural determinations have been performed for 2-7 and 11.     

Preparation, coordination properties and catalytic use of 1′-(diphenylphosphanyl)-1-ferrocenecarboxamides bearing 2-hydroxyethyl pendant groups

Polar amido-phosphane ligands, viz 1-(diphenylphosphanyl)-1′-[N-(2-hydroxyethyl)carbamoyl]ferrocene (1) and 1-(diphenylphosphanyl)-1′-[N,N-bis(2-hydroxyethyl)carbamoyl]ferrocene (2) were synthesised from 1′-(diphenylphosphanyl)-1-ferrocenecarboxylic acid (Hdpf) by direct amide coupling or via Hdpf-pentafluorophenyl ester 3. Subsequent reactions of 1 and 2 with [PdCl₂(cod)] (cod = η²:η²-cyclocta-1,5-diene) gave the respective bis(phosphane) complexes trans-[PdCl₂L₂] (4, L = 1; 5, L = 2). Depending on the solvent used in their subsequent crystallisation (ethanol or chloroform), these complexes were isolated in several defined solvated forms. The structure determination for free ligands and their solvated complexes (4·2EtOH, 4·6CHCl₃, 5·2EtOH, and 5·4CHCl₃) revealed the dominating role of hydrogen bonding in their crystal assemblies, the nature and complexity of the formed hydrogen-bonded arrays strongly varying with the ligand structure (one vs. two 2-hydroxethyl chains), their number in the discrete species (free ligands vs. the complexes), and also with the solvate. Catalytic tests performed with 4 and 5 in Suzuki-Miyaura cross-coupling reaction showed that both complexes form active catalysts for the coupling of aryl bromides with phenylboronic acid in common polar organic solvents, in water and in toluene-water biphasic mixture. Yet, complex 4 gave rise to hydrolytically more stable catalyst, which could be used five times without any detectable loss of activity in the toluene/water system. Complex 4 was also successfully applied to the synthesis of biaryl anti-inflammatory drugs and their analogues in pure water and in the toluene-water mixture.     

Synthesis and solid-state structural characterisation of Pt(II,IV) bromide complexes containing bidentate organothiomethylpyridine heteroleptic ligands

A convenient synthetic method for the preparation of organothiomethylpyridine ligands 2-(RSCH₂)C₅H₄N (R = Ph (L¹), Me (L²)), 2-MeS–6-Me-C₅H₃N (L³), and 2-MeS–4-Me-C₅H₃N (L⁴) via the initial lithiation of substituted 2-picolines followed by the nucleophilic reaction with a diorganyldisulfide is described. The complexes [PtBr₂L] (L = L¹–L⁴) have been prepared in good to high yields as yellow solids with low solubility in organic solvents. The solid state structures of the complexes have been determined, showing the spatial arrangement of the complexes to depend significantly upon varying substituents within the ligand. The complexes undergo oxidation by bromine to form the tetravalent complexes [PtBr₄(L)] (L = L¹–L⁴). The solid state structures of [PtBr₄(L²)] and [PtBr₄(L₄)] have been determined, and shown to be monomeric with the ligand chelating the platinum centre.