Palladium (II) complexes with mono-oxide 1,1′-bis(diphenylphosphino)metallocene ligands [Fe(η-C5Me4PPh2)(η-C5Me4P{O}Ph2)] and [Os(η-C5H4PPh2)(η-C5H4P{O}Ph2)]

The monoxides [Fe(η⁵-C₅Me₄PPh₂)(η⁵-C₅Me₄P{O}Ph₂)] (1) and [Os(η⁵-C₅H₄PPh₂)(η⁵-C₅H₄P{O}Ph₂)] (2) have been prepared by treatment of the corresponding diphosphines with CCl₄ and methanol.These ligands react with [Pd(PhCN)₂Cl₂] to give dichloride complexes of different structure.The dimeric complex [{Os(η⁵-C₅H₄PPh₂)(η⁵-C₅H₄P{O}Ph₂)}PdCl(μ-Cl)]₂ (4) contains the monodentate P-coordinated osmocene ligand with the free P{O}Ph₂ group, while the octamethylferrocene ligand gives the chelate k²-P,O complex [{Fe(η⁵-C₅Me₄PPh₂)(η⁵-C₅Me₄P{O}Ph₂)}PdCl₂] (3).The structures of 3 and 4 have been determined crystallographically.Treatment of 3 and 4 with silver salts in CH₂Cl₂ or acetonitrile leads to the corresponding dicationic complexes[{M(η⁵-C₅R₄PPh₂)(η⁵-C₅R₄P{O}Ph₂)}Pd(MeCN)_x]²⁺ (5, M = Fe, R = Me; 6, M = Os, R = H). Complex 5 decomposes upon isolation, in contrast 6 is rather stable, probably due to Os-Pd bonding. The dichlorides 3 and 4 catalyze catalytic amination of p-bromotoluene with N-(4-tolyl)morpholine with lower activity than (dppf)PdCl₂, however they perform comparable to (dppf)PdCl₂ activity in coupling of p-bromotoluene with p-methoxyphenyl boronic acid.     

Synthesis, characterization and catalytic behaviour of ansa-zirconocene complexes containing tetraphenylcyclopentadienyl rings: X-ray crystal structures of [Zr{Me2Si(η-C5Ph4)(η-C5H3R)}Cl2] (R = H, Bu)

The ansa-bis(cyclopentadiene) compounds, Me₂Si(C₅HPh₄)(C₅H₄R) (R = H (2); Bu^t (3)), have been prepared by the reaction of C₅HPh₄(SiMe₂Cl) (1) with Na(C₅H₅) or Li(C₅H₄Bu^t), respectively, and transformed to the di-lithium derivatives, Li₂{Me₂Si(C₅Ph₄)(C₅H₃R)} (R = H (4); Bu^t (5)), by the action of n-butyllithium. The ansa-zirconocene complexes, [Zr{Me₂Si(η⁵-C₅Ph₄)(η⁵-C₅H₃R)}Cl₂] (R = H (6); Bu^t (7)), were synthesized from the reaction of ZrCl₄ with 4 or 5, respectively. Compounds 6 and 7 have been tested in the polymerization of ethylene and compared with their methyl-substituted analogues, [Zr{Me₂Si(η⁵-C₅Me₄)(η⁵-C₅H₃R)}Cl₂] (R = H (8); Bu^t (9)). Whilst 8 and 9 are catalytically active, the tetraphenyl-substituted complexes 6 and 7 proved to be inactive in the polymerization of ethylene. This phenomenon has been explained by DFT calculations based on the reaction intermediates in the polymerization processes involving 6 and 7, which showed that the extraction of a methyl group from the zirconocene complex to form the cationic active specie is endothermic and therefore unfavourable.     

Effect of high external pressures on the vibrational spectra of Zeise’s complexes, K[Pt(η-C2H4)Cl3] and [Pt(η-C2H4)Cl2]2

The pressure dependences (dν/dP) of the main IR and Raman bands of Zeise’s complexes, K[Pt(η²-C₂H₄)Cl₃] and [Pt(η²-C₂H₄)Cl₂]₂, have been determined for the first time for selected pressures up to ∼33 kbar with the aid of diamond-anvil cells. Neither complex undergoes a pressure-induced structural change throughout the pressure range investigated. The dν/dP values range from −0.13 to 0.79 cm⁻¹ kbar⁻¹. The negative values have proved particularly informative in identifying the location of the CC stretching modes of the Pt-ethylene groups, a topic of considerable disagreement in the literature.     

Reactions of diferrocenyl dichalcogenides with [W(CO)5(THF)]: X-ray crystal structures of Fc2Te2 and [W2(μ-SeFc)2(CO)8] (Fc = [Fe(η-C5H5)(η-C5H4)])

Treatment of [W(CO)₅THF] with diferrocenyl diselenide, Fc₂Se₂, yielded the novel metal-metal bonded tungsten(I) complex, [W₂(μ-SeFc)₂(CO)₈] (1: Fc = ferrocenyl, [Fe(η⁵-C₅H₅)(η⁵-C₅H₄)]), which was characterised by NMR and IR spectroscopy, mass spectrometry, and X-ray crystallography. The corresponding tellurium derivative could not be prepared by an analogous route. The X-ray crystal structure of Fc₂Te₂ has also been determined.     

New ferrocenylmethylphosphines - Preparation, characterisation and coordination chemistry of PH(CH2Fc)2, P(CH2Fc)3 [Fc = Fe(η-C5H5)(η-C5H4)] and their derivatives

The new ferrocenylmethylphosphines PH(CH₂Fc)₂ (1) [Fc = Fe(η⁵-C₅H₅)(η⁵-C₅H₄)] and P(CH₂Fc)₃ (2) and the phosphonium salt [P(CH₂Fc)₃(CH₂OH)]I (3) were synthesised from P(CH₂OH)₃ and [FcCH₂NMe₃]I. [P(CH₂Fc)(CH₂OH)₃]Cl (4) was obtained from P(CH₂Fc)(CH₂OH)₂, CH₂O and HCl. The new phosphines and phosphonium salts were fully characterised by NMR and IR spectroscopy and MS. [Mo(CO)₆] reacts with 1 to give [Mo(CO)₅{PH(CH₂Fc)₂}] (5) in high yield, but attempts to employ 2 as a ligand failed. The reaction of [P(CH₂Fc)₃(CH₂OH)]I (3) and [PH(CH₂Fc)₃]I (obtained in situ from 3 and Na₂S₂O₅) with [WI₂(CO)₃(NCMe)₂] gave the complex salts [P(CH₂Fc)₃(CH₂OH)][WI₃(CO)₄] (6) and [PH(CH₂Fc)₃][WI₃(CO)₄] (7), respectively. [P(CH₂Fc)₄]I (8) was synthesized from PH₂CH₂Fc and [FcCH₂NMe₃]I. Crystal structures were obtained for 1, 3-8.     

Stilbene analogues incorporating the Co(η-C4Ph4)(η-C5H4-) end group

A number of organometallic stilbenes of the general type [Co(η⁴-C₄Ph₄)(η⁵-C₅H₄CHCHR] are reported where R is C₆H₄X-4 (X = H, OMe, Br, NO₂), 1-naphthyl, 9-anthryl, 1-pyrenyl, (η⁵-C₅H₄)Co(η⁴-C₄Ph₄), and (η⁵-C₅H₄)Fe(η⁵-C₅H₄Y) {Y = CHO, CHC(CN)₂ and CHCHC₅H₄-η⁵)Co(η⁴-C₄Ph₄)}. They were prepared by Wittig or Horner-Wadsworth-Emmons reactions which yield both E and Z or only E products respectively. The isomers were separated and all compounds characterised by standard spectroscopic techniques as well as by X-ray diffraction methods in many cases. The electrochemistry of the stilbene analogues in dichloromethane solution is also reported. In most, the (η⁵-C₅H₄)Co(η⁴-C₄Ph₄) functional group undergoes a reversible one-electron oxidation. For those molecules that also include (η⁵-C₅H₄)Fe(η⁵-C₅H₄Y), this is preceded by the reversible oxidation of the ferrocenyl group. Spectroscopic and structural data suggests that for most compounds there is little electronic interaction between Co(η⁴-C₄Ph₄)(η⁵-C₅H₄) and the R end groups which are effectively independent of one another. The only exceptions to this are Z and E-[Co(η⁴-C₄Ph₄)(η⁵-C₅H₄CHCHC₆H₄NO₂-4], and [Co(η⁴-C₄Ph₄)(η⁵-C₅H₄CHCHC₅H₄-η⁵)Fe{η⁵-C₅H₄CHC(CN)₂}] where the electronic spectra are respectively consistent with a significant Co(η⁴-C₄Ph₄)(η⁵-C₅H₄)/NO₂ donor/acceptor interaction and a less significant Co(η⁴-C₄Ph₄)(η⁵-C₅H₄)/C(CN)₂ one. However, OTTLE studies show that in the electronic spectra of [Co(η⁴-C₄Ph₄)(η⁵-C₅H₄CHCHR]⁺ there are low energy absorption bands (950-1800 nm) which are attributed to R → Co(η⁴-C₄Ph₄)(η⁵-C₅H₄)⁺ or, when R is a ferrocenyl-base group, Co(η⁴-C₄Ph₄)(η⁵-C₅H₄) → (η⁵-C₅H₄)Fe(η⁵-C₅H₄Y)⁺ charge transfer transitions. The ferrocenyl compounds undergo cis/trans isomerisation on the OTTLE experiment timescale.     

Allyl complexes of molybdenum with Schiff base ligands. The crystal structures of [MoCl(CO)2{N(C6H4-2-OMe)C(Me)C5H4N}(η-C3H5)] and [MoCl(CO)2{N(Me)C(Ph)C5H4N}(η-C3H5)] are described

Treatment of the molybdenum tetracarbonyl complexes of [Mo(CO)₄L₂] (L₂=pyridyl amine Schiff base ligands) with allyl chloride in refluxing THF afforded η³-allyl complexes [MoCl(CO)₂L₂(η³-allyl)] (1-9). These complexes have been characterised by various techniques including ¹H-NMR, IR and FABMS spectroscopies and the single crystal X-ray structure determinations of the complexes [MoCl(CO)₂{N(C₆H₄-2-OMe)C(Me)C₅H₄N}(η³-C₃H₅)] (3) and [MoCl(CO)₂{N(Me)C(Ph)C₅H₄N}(η³-C₃H₅)] (4).     

Aldol condensation reactions of [Co(η-C4Ph4){η-C5H4C(O)CH3}]

The aldol condensation reaction between [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CH₃}] and a range of aromatic aldehydes [RCHO] and [RCHCH-CHO] gives a series of α,β-unsaturated ketones [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CHCH-R}] and [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CHCH-CHCH-R}] (3). The reaction is promoted by various bases: NaH proved to be the most effective whilst ⁿBuLi gave [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(OH)(ⁿBu)CH₃}] as the major product. NaOH was ineffective, perhaps indicating that that the methyl protons in [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CH₃}] are less acidic than those in [Fe(η⁵-C₅H₅){η⁵-C₅H₄C(O)CH₃}]. Compounds 3 were characterised spectroscopically. Their ¹H NMR spectra are consistent with a trans configuration about their CC bond, and this was confirmed by X-ray crystallography in five cases, which showed that all have the same basic structure with parallel cyclobutadiene and cyclopentadienyl ligands, but they are not identical. The C₅H₄C(O)(CHCH)_n-R (n = 1 or 2) moieties show little evidence for delocalisation and often deviate from planarity. The UV/Vis spectra of those 3 with smaller aromatic rings (R = C₆H₅, 4-C₆H₄NMe₂, 2-C₄H₃S and 1-C₁₀H₇) suggest that these are donor-π-acceptor systems, but as the annellation of R increases (R = 9-C₁₄H₉, 1-C₁₆H₉ and 1-C₂₀H₁₁) the spectra increasingly resemble those of the parent polycyclic aromatic hydrocarbon, RH. Reduction of [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CHCH-C₁₀H₇-1}] with DIBAL gives a mixture of [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CH₂CH₂-C₁₀H₇-1}] and [Co(η⁴-C₄Ph₄){η⁵-C₅H₄CH(OH)CHCH-C₁₀H₇-1}]. A minor product from the preparation of [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CH₃}] was shown by X-ray crystallography to be the η⁴-butadiene complex [Co{η⁴-Ph(H)CC(Ph)-C(Ph)C(H)Ph}{η⁵-C₅H₄C(O)CH₃}].     

(Cyclopentadienyl){(N,N-dimethylaminoethyl)cyclopentadienyl} complexes of zirconium: Crystal structure of [(η-C5H5)(η-C5H4CH2CH2NHMe2)ZrCl2]2[ZrCl6]

[(η⁵-C₅H₅)ZrCl₃] reacts with [C₅H₄CH₂CH₂NMe₂]Li yielding the coordination polymer [(C₅H₅)(C₅H₄CH₂CH₂NMe₂)ZrCl₂]_n (1) as a brown solid which is very sensitive to moisture. The reaction of 1 with 1.35 equivalent of HCl (methanolic solution) yields pale yellow green crystals of [(η⁵-C₅H₅)(η⁵-C₅H₄CH₂CH₂NHMe₂)ZrCl₂]₂[ZrCl₆] (2). Compound 2 was fully characterized on the basis of NMR data and X-ray crystal structure analysis. The formation of this product indicates the elimination of C₅H₄CH₂CH₂NMe₂ as well as C₅H₅ ligands from the Zr(IV) metal centre.     

Derivatisation of boryl substituted titanium half-sandwich complexes - Molecular structures of [Ti{(η-C5H4)B(NiPr2)N(H)tBu}Cl2(NMe2)] and [{TiCl2(μ-{OB(NHMe2)-η-C5H4})}2-μ-O]

The half-sandwich complex [Ti{(η⁵-C₅H₄)B(NiPr₂)N(H)iPr}(NMe₂)₃] (6) was prepared from (η¹-C₅H₅)B(NiPr₂)N(H)iPr (5) and [Ti(NMe₂)₄] with cleavage of one equivalent of HNMe₂ and further converted into the corresponding constrained geometry complex [Ti{(η⁵-C₅H₄)B(NiPr₂)NiPr}(NMe₂)₂] (7) by elimination of a second equivalent of HNMe₂. Reaction of the half-sandwich complexes [Ti{(η⁵-C₅H₄)B(NiPr₂)N(H)R}(NMe₂)₃] (R = iPr, tBu) with excess Me₃SiCl yielded the corresponding dichloro complexes [Ti{(η⁵-C₅H₄)B(NiPr₂)N(H)R}Cl₂(NMe₂)] (R = tBu (10), iPr (11)). The intermediate species [Ti{(η⁵-C₅H₄)B(NiPr₂)N(H)iPr}Cl(NMe₂)₂] (9) could also be spectroscopically characterised. Partial hydrolysis of 10 and 11, respectively, resulted in formation of [{TiCl₂(μ-{OB(NHMe₂)-η⁵-C₅H₄})}₂-μ-O] (12). The molecular structures of 10 and 12 have been determined by X-ray crystallographic analyses. Complex 10, when activated with MAO, was found to be a highly active styrene polymerisation catalyst while being inactive towards the polymerisation of ethylene.     

Protonation of the lithio derivatives of the 1,2,4-tri-phosphaferrocenes, [LiFe(η-P2C2Bu2PBu)(η-C5R5)] (R = H, Me): Crystal and molecular structure of [Fe(η-P3C2Bu2BuH)(η-C5Me5)]

A new synthetic route is described to generate the 4-centre-5 electron donor ring system (P₃C₂^tBu₂BuH), via protonation of the lithium salts [LiFe(η⁴-P₂C₂^tBu₂PBu)(η⁵-C₅R₅)] (R = H, Me). The molecular structure of [Fe(η⁴-P₃C₂^tBu₂BuH)(η⁵-C₅R₅)] (R = Me) has been determined by a single crystal X-ray study.     

A synthetic, structural and reactivity study of [(η-C4R4)Co(η-C5H4X)] complexes, R = Me or Et; X = CHO, CHCHFc, CHCH(η-C5H4)Co(η-C4Ph4), CHC(CN)2: Unexpected formation of [(η-cyclopentadienyl)(η-3,4,5,6-tetraethyl-α-pyrone)cobalt]

The tetraethyl- and tetramethyl-cyclobutadiene complexes [(η⁴-C₄R₄)Co(η⁵-C₅H₄CHO)] R = Et, 5, R = Me, 7, and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CO₂Me)] R = Et, 6, R = Me, 8, are conveniently prepared by photolysis of the corresponding isocobaltocenium cations [(η⁴-C₄R₄)Co(η⁶-C₆H₅Me)]⁺ in acetonitrile, and subsequent treatment with Na[C₅H₄CHO] or Na[C₅H₄CO₂Me]. The aldehydes 5 and 7 undergo Wittig and Knoevenagel reactions with [FcCH₂PPh₃]I and CH₂(CN)₂, to form [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=CHFc)] and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=C(CN)₂], 11 and 15, respectively. The Horner-Wittig reaction of [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH₂P(O)(OEt)₂] with [(η⁴-C₄Ph₄)Co(η⁵-C₅H₄CHO)] yields [(η⁴-C₄R₄)Co(η⁵:η⁵-C₅H₄CHCH-C₅H₄)Co(η⁴-C₄Ph₄)], 12 and 13. [(η⁴-C₄Me₄)Co(η⁵-C₅H₄CHO)] also reacts with t-BuLi and FcLi to furnish the corresponding secondary alcohols, 16 and 17, respectively. Surprisingly, the attempted direct synthesis of 5 by reaction of Na[C₅H₅] and ethyl formate with [(η⁴-C₄Et₄)Co(CO)₂I], 1, instead yielded [(η⁵-C₅H₅)Co(η⁴-3,4,5,6-tetraethyl-α-pyrone)], 18, and a mechanistic proposal is advanced. The X-ray crystal structures of 1, 7, 8, 11(Z), 15 and 18, and also the isocobaltocenium salts [(η⁴-C₄Et₄)Co(η⁶-C₆H₅Me)][PF₆], 2, and [(η⁴-C₄Et₄)Co(η⁶-1,3,5-C₆H₃Me₃)][PF₆], 4, are reported.     

Cyclopentadienyl chromium and tungsten complexes with halide, methyl and σ-phenylethynyl ligands: Structures of (η-C5H5)Cr(NO)2(-CC-C6H5), (η-C5H5)Cr(NO)2I and [(η-C5H4)-COOCH3]W(CO)3Cl

With copper(I) iodide as catalyst, σ-alkynyls, compounds (η⁵-C₅H₅)Cr(NO)₂(CC-C₆H₅) (5), [(η⁵-C₅H₄)-COOCH₃]Cr(NO)₂(CC-C₆H₅) (10), and [(η⁵-C₅H₄)-COOCH₃]W(CO)₃(CC-C₆H₅) (13), were prepared from their corresponding metal chloride 1, 6 and 12. Structures of compound 3, 5 and 12 have been solved by X-ray diffraction studies. In the case of 5, there is an internal mirror plane passing through the phenylethynyl ligand and bisecting the Cp ring. The phenyl group is oriented perpendicularly to the Cp with an eclipsed conformation. The twist angle is 0° and 118.4° for -CC-Ph and two NO ligands, respectively. The orientation is rationalized in terms of orbital overlap between ψ₃ of Cp, dπ of Cr atom, and π^∗ of alkynyl ligand, and complemented by molecular orbital calculation. The opposite correlation was observed on the chemical shift assignments of C(2)-C(5) on Cp ring in compounds 6 and 12, using HetCOR NMR spectroscopy. The electron density distribution in the cyclopentadienyl ring is discussed on the basis of ¹³C NMR data and compared with the calculations via density functional B3LYP correlation-exchange method.     

Synthesis and electrochemical studies of η-monocyclopentadienylruthenium(II) complexes with substituted thiophene nitrile ligands. Crystal structure of [Ru(η-C5H5)(dppe)(NC{SC4H2}2NO2)][PF6]

A systematic series of η⁵-monocyclopentadienylruthenium(II) complexes with substituted thiophene nitrile ligands of general formula [Ru(η⁵-C₅H₅)(P_P)(NC{SC₄H₂}_nNO₂)][PF₆] (P_P = dppe, (+)-diop; n = 1-3) has been synthesized and characterized. Spectroscopic and electrochemical data were used in order to get an insight on the molecular nonlinear optical properties of these complexes when compared to those found for the reported thiophene iron(II) and p-benzonitrile or 1,2-di-(2-thienyl)-ethene derived iron(II)/ruthenium(II) related complexes. The compound [Ru(η⁵-C₅H₅)(dppe)(NC{SC₄H₂}₂NO₂)][PF₆] was also characterized by X-ray diffraction. The solid state nonlinear optical properties of the chiral compounds were also evaluated by Kurtz powder technique with a Nd:YAG laser emitting at 1064 nm.     

Synthesis of new chloro methyl niobium and tantalum complexes with silyl-cyclopentadienyl ligands: X-ray crystal structure of [Ta{η-C5H3(SiMe3)2}Cl2Me2]

Trichloro methyl [Nb{η⁵-C₅H₃(SiXMe₂)(SiMe₃)}Cl₃Me] (X = Cl, 2; Me, 3), dichloro dimethyl [Nb{η⁵-C₅H₃(SiXMe₂)(SiMe₃)}Cl₂Me₂] (X = Cl, 4; Me, 5) and tetramethyl [Nb{η⁵-C₅H₃(SiXMe₂)(SiMe₃)}Me₄] (X = Me, 6; Cl, 7) niobium complexes were synthesized by treatment of starting tetrachloro derivatives [Nb{η⁵-C₅H₃(SiXMe₂)(SiMe₃)}Cl₄] (X = Cl, 1a; Me, 1b) with dimethyl zinc or chloro methyl magnesium in different proportions and conditions. A mixture of trichloro methyl and dichloro dimethyl tantalum complexes [Ta{η⁵-C₅H₃(SiClMe₂)(SiMe₃)}Cl_4−xMe_x] (x = 1, 8; 2, 9) in a 2:1 molar ratio was obtained in the reaction of [Ta{η⁵-C₅H₃(SiClMe₂)(SiMe₃)}Cl₄] (1c) with 0.5 equivalents of ZnMe₂ in toluene at low temperature. 8 could be isolated as single compound when 1 equivalent of 1c was added to the mixtures of 8 and 9, while the reaction of 1c with 1.5 equivalents of dimethyl zinc gave 9 as unitary product. However, [Ta{η⁵-C₅H₃(SiMe₃)₂}Cl₄] (1d) reacts with 0.5 equivalents of alkylating reagent giving the trichloro methyl compound [Ta{η⁵-C₅H₃(SiMe₃)₂}Cl₃Me] (10) in good yield. On the other hand, [Ta{η⁵-C₅H₃(SiMe₃)₂}Cl₄] (1d) reacts with 2 equivalents of MgClMe in hexane at room temperature giving a mixture of dichloro dimethyl and chloro trimethyl complexes[Ta{η⁵-C₅H₃(SiMe₃)₂}Cl_4−xMe_x] (x = 2, 11; 3, 12), while the use of 4 equivalents of MgClMe converts 1c into the tetramethyl derivative [Ta{η⁵-C₅H₃(SiClMe₂)(SiMe₃)}Me₄] (13). Finally, a tetramethyl tantalum complex [Ta{η⁵-C₅H₃(SiMe₃)₂}Me₄] (14) was prepared by reaction of [Ta{η⁵-C₅H₃(SiXMe₂)(SiMe₃)}Cl₄] (X = Cl, 1c; Me, 1d) with 5 (X = Cl) or 4 (X = Me) equivalents of MgClMe in diethyl ether (X = Cl) or hexane (X = Me), respectively, as solvent. All the complexes were studied by IR and NMR spectroscopy and the molecular structure of the complex 11 was determined by X-ray diffraction methods.     

Synthesis and structure of the monometallic cationic complex [Cp(CO)2Fe{η-(CH2CHCH2CH3)}]PF6 (Cp = η-C5H5)

The bimetallic carbocation complex [{Cp(CO)₂Fe}₂(μ-C₄H₇)]PF₆ reacted with trifluoroacetic acid to give the mononuclear cationic complex [Cp(CO)₂Fe{η²-(CH₂CHCH₂CH₃)}]PF₆, which formed yellow orthorhombic crystals in the space group P2₁2₁2₁ with a = 7.652(4), b = 13.422(7), c = 14.037(7); α = β = γ = 90.00 and Z = 4. The carbocation is coordinated to the metal in a η²-fashion forming a chiral metallacyclopropane type structure. The β-CH carbon (C9) is disordered over two positions (C9A and C9B), each having about 50% occupancy. This is attributed to there being both the R and S enantioface isomers in equal amounts in the crystal sample. NMR data indicate that the metallacyclopropane structure observed in the solid state is preserved in solution.     

Synthesis of niobocene imido cations: X-ray crystal structure of [Nb(NBu)(η-C5H4SiMe3)2(CNBu)][BPh4]

The reduction of [Nb(NBu^t)(η⁵-C₅H₄SiMe₃)₂Cl] by sodium amalgam followed by oxidation by [Fe(η⁵-C₅H₅)₂][BPh₄] in the presence of CNBu^t gave [Nb(NBu^t)(η⁵-C₅H₄SiMe₃)₂(CNBu^t)][BPh₄] (1). In a similar manner, [Nb(NPh)(η⁵-C₅H₄SiMe₃)₂(CNBu^t)][BPh₄] (2), [Nb(NPh)(η⁵-C₅H₄SiMe₃)₂(CO)][BPh₄] (3) and [Nb(NBu^t){Me₂Si(η⁵-C₅Me₄)(η⁵-C₅H₄)}(CNBu^t)][BPh₄] (4), were prepared. The reduction of [Nb(NBu^t){Me₂Si(η⁵-C₅H₄)₂}Cl] gave, depending on the experimental conditions, either the d¹-d¹ dimer [(Nb{Me₂Si(η⁵-C₅H₄)₂}(μ-NBu^t))₂] (5) or the hydride derivative [Nb(NBu^t){Me₂Si(η⁵-C₅H₄)₂}H] (6). The reaction of 5 with I₂ led to the formation of [Nb(NBu^t){Me₂Si(η⁵-C₅H₄)₂}I] (7). The molecular structure of 1 was determined by single-crystal X-ray diffraction studies.     

Hydrogenation of cyclohexene catalyzed by ruthenium nitrosyl complexes: Crystal structures of catalyst precursors [CpRu(μ2-NO)2RuCp] and [CpRu(NO)(η-C6H10)] (Cp = η-C5(CH3)5)

Hydrogenation of cyclohexene with 0.1 mol% of the (nitrosyl)ruthenium catalyst [Cp^∗Ru(NO)(C₆H₅)₂] (1; Cp^∗ = η⁵-C₅(CH₃)₅) under 1.0 MPa of H₂ in water at 90 °C for 13 h afforded cyclohexane in 94% yield. The nitrosyl-bridged dinuclear complex [Cp^∗Ru(μ₂-NO)₂RuCp^∗] (2) and the mononuclear cyclohexene complex [Cp^∗Ru(NO)(η²-C₆H₁₀)] (3), which also serve as catalyst precursors, have been obtained from the reaction mixture. X-ray crystallographic analyses of 2 and 3 have revealed that the bridging nitrosyl ligands in 2 form an almost planar Ru₂N₂ four-membered ring with the Ru–Ru distance of 2.5366(5) Å, whereas the nitrosyl ligand in 3 is linear. On the other hand, a ruthenium complex without a nitrosyl ligand [Cp^∗Ru(CH₃CN)₃][OSO₂CF₃] proved to be less effective for this hydrogenation.     

Syntheses, structures, and dynamic properties of M(CO)2(η-C3H5)(en)(X) (M = Mo, W; X = Br, N3, CN) and [(en)(η-C3H5)(CO)2M(μ-CN)M(CO)2(η-C3H5)(en)]Br (M = Mo, W)

Mononuclear compounds M(CO)₂(η³-C₃H₅)(en)(X) (X = Br, M = Mo(1), W(2); X = N₃, M = Mo(3), W(4); X = CN, M = Mo(5), W(6)) and cyanide-bridged bimetallic compounds [(en)(η³-C₃H₅)(CO)₂M(μ-CN)M(CO)₂(η³-C₃H₅)(en)]Br (M = Mo (7), W(8)) were prepared and characterized. These compounds are fluxional and display broad unresolved proton NMR signals at room temperature. Compounds 1-6 were characterized by NMR spectroscopy at −60 °C, which revealed isomers in solution. The major isomers of 1-4 adopt an asymmetric endo-conformation, while those of 5 and 6 were both found to possess a symmetric endo-conformation. The single crystal X-ray structures of 1-6 are consistent with the structures of the major isomer in solution at low temperature. In contrast to mononuclear terminal cyanide compounds 5 and 6, cyanide-bridged compounds 7 and 8 were found to adopt the asymmetric endo-conformation in the solid state.