Synthesis of sulfur containing analogues of the soluble guanylate cyclase inhibitor 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazin-1-one NS2028

Sulfur analogues of the soluble guanylate cyclase (sGC) inhibitor NS2028 1a are synthesized. Treating 8-bromo-2H-benzo[b][1,4]oxazin-3(4H)-one oxime (6) with 1,1′-thiocarbonyldiimidazole (1.1 equiv) gave the carbamothioate 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazine-1-thione (3a) in 83% yield. Alternatively reacting NS2028 1a with P₂S₅ (0.5 equiv) affords the carbamothioate 3a in 80% yield. Similar treatment of 8-aryl substituted NS2028 analogues 1b-d with P₂S₅ gave the carbamothioates 3b-d in 64-91% yields. Although quite stable, the carbamothioates 3a-d could be thermally isomerized in the presence of Cu (10 mol %) to afford the thiocarbamates 4a-d in high yields. Interestingly, in the case of carbamothioate 3a Pd and In metals also facilitated the isomerization. Furthermore, treatment of the thiocarbamates 4a-d with P₂S₅ (0.5 equiv) affords the carbamodithioates 5a-d in 72-89% yields. All new compounds are fully characterized including single crystal X-ray data for carbamothioate 3a and thiocarbamate 4a. Finally, a mechanism is proposed for the carbamothioate to thiocarbamate isomerization.     

A novel and easy two-step,microwave-assisted method for the synthesis of halophenyl pyrrolo[2,3-b]quinoxalines via their pyrrolo precursors. Evaluation of their bioactivity

A novel, two-step, facile route for the synthesis of pyrrolo[2,3-b]quinoxalines via 2,3-dioxopyrroles, enhanced by microwave irradiation, is presented. The newly synthesized 2,3-dioxo-5-halophenyl pyrrolo precursors 4a–c as well as the non-aromatized ethyl 2-(4-halophenyl)-1-methyl-2,4-dihydro-1H-pyrrolo[2,3-b]quinoxaline-3-carboxylates 6a–c and the aromatized ethyl 2-(4-halophenyl)-1-methyl-1H-pyrrolo[2,3-b]quinoxaline-3-carboxylates 7a–c were evaluated for their antioxidant, cytostatic, and antiviral properties. Most of them proved to be potent hydroxyl radical scavengers and inhibited in vitro lipid peroxidation. The compounds showed moderate antiproliferative activity, while 6a inhibited vaccinia virus at an EC₅₀ value of 2 μM, and 4c and 6c inhibited Sindbis virus at EC₅₀ values of 4 μM.     

Carbonyl complexes of manganese, rhenium and molybdenum with 2-pyridylimino acid ligands

[MBr(CO)₃{κ²(N,O)-pyca}] [M = Mn(1a), Re(1b), pyca = pyridine-2-carboxaldehyde] and [MoCl(η³-C₃H₄Me-2)(CO)₂{κ²(N,O)-pyca}] (1c) react with aminoacid β-alanine to give the corresponding iminopyridine complexes 2a-2c. The same method affords the iminopyridine derivatives from γ-aminobutyric acid (GABA) (3a-3c) and 3-aminobenzoic acid (4a-4c). For complexes 2a-2c, 3a, 3c and 4a, the solid state structures have been determined by X-ray crystallography, revealing interesting differences in their hydrogen-bonding patterns in solid state.     

Orthopalladation of phosphorus ylides in endo position with bidentate ligands

The ortho-metallated complexes [Pd₂{κ²(C,C)-C₆H₄(PPh₂CHC(O)C₆H₅R}₂(μ-Cl)₂] (R = Ph (1a), NO₂ (1b), Br (1c)) were prepared by refluxing equimolar mixtures of Ph₃PCHC(O)C₆H₅R, (R = Ph, NO₂, Br) and Pd(OAc)₂ in MeOH, followed by an excess of NaCl. The dinuclear complexes (1a-1c) react with silver trifluoromethylsulfonate and bidentate ligands [L = bipy (2,2′-bipyridine), phen (phenanthroline), dppe (bis(diphenylphosphino)ethane), dppp (bis(diphenylphosphino)propane)] giving the mononuclear stabilized orthopalladated complexes in endo position [Pd{κ²(C,C)-C₆H₄(PPh₂CHC(O)R}L](OTf) [R = Ph, L = phen (2a), bipy (3a), dppe (4a), dppp (5a); R = NO₂, L = phen (2b), bipy (3b), dppe (4b), dppp (5b); R = Br, L = phen (2c), bipy (3c), dppe (4c), dppp (5c); OTf = trifluoromethylsulfonate anion]. Orthometalation and ylidic C-coordination are demonstrated by an X-ray diffraction study of 2c and 3c. In the structures, the palladium atom shows a slightly distorted square-planar coordination geometry.     

Synthesis and molecular structures of dinuclear complexes with 1,2-dihydro-1,2-diphenyl-naphtho[1,8-c,d]1,2-diphosphole as a bridging ligand

A bisphosphine in which a PhP-PPh bond bridges 1,8-positions of naphthalene, 1,2-dihydro-1,2-diphenyl-naphtho[1,8-cd]-1,2-diphosphole (1), was used as a bridging ligand for the preparation of dinuclear group 6 metal complexes. Free trans-1, a more stable isomer having two phenyl groups on phosphorus centers mutually trans with respect to a naphthalene plane, was allowed to react with two equivalents of M(CO)₅(thf) (M = W, Mo, Cr) at room temperature to give dinuclear complexes (OC)₅M(μ-trans-1)M(CO)₅ (M = W (2a), Mo (2b), Cr (2c)). The preparation of the corresponding dinuclear complexes bridged by the cis isomer of 1 was also carried out starting from the free trans-1 in the following way. Mono-nuclear complexes M(trans-1)(CO)₅ (M = W (3a), Mo (3b), Cr (3c)) which had been prepared by a reaction of trans-1 with one equivalent of the corresponding M(CO)₅(thf) (M = W, Mo, Cr) complex, were heated in toluene, wherein a part of the trans-3a-c was converted to their respective cis isomer M(cis-1)(CO)₅. Each cis trans mixture of the mono-nuclear complexes 3a-c was treated with the corresponding M(CO)₅(thf) to give a cis trans mixture of the respective dinuclear complexes 2a-c. The cis isomer of the ditungsten complex 2a was isolated, and its molecular structure was confirmed by X-ray analysis, showing a shorter W?W distance of 5.1661(3) Å than that of 5.8317(2) Å in trans-2a.     

From symmetrical to unsymmetrical bimetallic nickel complexes bearing aryl-linked iminopyridines; synthesis, structures and ethylene polymerisation studies

Both symmetrical and unsymmetrical tetramethylphenyl-linked iminopyridines, 1,4-{(2-C₅H₄N)RCN}₂-2,3,5,6-Me₄C₆ [R = H (L1a), Me (L1b)] and 1-{(2-C₅H₄N)HCN}-4-{(2-C₅H₄N)MeCN}-2,3,5,6-Me₄C₆ (L1c), have been prepared in good yield using straightforward condensation strategies. The molecular structures of L1a and L1c reveal the adjacent imino and pyridyl nitrogen atoms to adopt transoid configurations. Interaction of L1x with two equivalents of NiX₂ [NiX₂ = (DME)NiBr₂ (DME = 1,2-dimethoxyethane), NiCl₂] in n-BuOH at elevated temperature affords the paramagnetic bimetallic complexes, [(L1x)Ni₂X₄] [L1x = L1a, X = Br (1a); L1x = L1b, X = Br (1b); L1x = L1c, X = Br (1c); L1x = L1a, X = Cl (1d)] in moderate to good yield. Adduct formation results on treatment of bromide-containing 1a-1c with DMF (dimethylformamide) to yield dicationic [(L1x)Ni₂Br₂(DMF)₆]Br₂ [L1x = L1a (2a), L1b (2b), L1c (2c)], while with chloride-containing 1d the neutral species [(L1a)Ni₂Cl₄(DMF)₄] (3) is obtained. Activation of 1a-1d and 2c with excess methylaluminoxane (MAO) generates active ethylene polymerisation catalysts (1b/MAO > 1c/MAO > 1a/MAO ∼ 1d/MAO > 2c/MAO) affording mixtures of waxes and low molecular weight solid polyethylene. Multinuclear NMR and GC analysis of the waxy components reveal methyl branched materials that contain mostly internal unsaturation along with low levels of α-olefins. Broad molecular weight distributions are observed for all the polymers obtained, with that from 1b/MAO leading to the highest molecular weight. Single crystal X-ray diffraction studies have been performed on L1a, L1c, 2a-2c and 3.     

New synthetic route to polyphosphine ligands bearing 1,2,4,5-tetrakis(phosphino)benzene framework: structural characterizations of 1,4-(PPh2)2-2,5-(PR2)2-C6F2 (R = Ph, Pr, Et)

Reactions of 1,4-dibromo-2,5-difluorobenzene with two equivalents of lithium diisopropylamide at low temperature (T < −90 °C) followed by a quench with a slight excess of ClPPh₂ afford 1,4-dibromo-2,5-bis(diphenylphosphino)-3,6-difluorobenzene (1) in good yields. Reacting 1 with two equivalents of BuLi followed by a quench with a slight excess of ClPR₂ yield novel 1,2,4,5-tetrakis(phosphino)-3,6-difluorobenzenes 1,4-(PPh₂)₂-2,5-(PR₂)₂-C₆F₂ (R = Ph (2a); R = ⁱPr (2b); R = Et (2c)) in moderate yields. Compounds 1 and 2a-c were characterized by multinuclear NMR spectroscopy and elemental analyses. In addition, molecular structures of 2a-c have been determined by single crystal X-ray crystallography. Phosphorus atoms of PPh₂/PR₂ substituents in 2a-c are displaced from the plane of the central phenyl ring due to steric interactions with neighboring groups.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

Density functional theory calculations and experimental parameters for mutarotation of 6-deoxy-l-mannopyranosyl hydrazine

The geometry and energy profiles of the mutarotation pathway present in the equilibrium of 6-deoxy-β-l-mannopyranosyl 2,4-dinitrophenylhydrazine (1a), 6-deoxy-l-mannose 2,4-dinitrophenylhydrazone (1b), and 6-deoxy-α-l-mannopyranosyl 2,4-dinitrophenylhydrazine (1c) were modeled by DFT calculations at B3LYP/6-31G(d) level affording ΔG_DFT=0.000 kcal/mol, ΔG_DFT=0.174 kcal/mol, and ΔG_DFT=3.411 kcal/mol, respectively. Experimentally, the β-l-pyranose 1a occurs in 50% followed by the acyclic structure 1b in 44% as well as by the α-l-anomer 1c in 6%. The conformations of 1a-c and their corresponding 2,3,4-triacetyl derivatives 2a-c were studied by molecular modeling and NMR spectroscopy. IR frequencies, NMR chemical shifts, and X-ray diffraction analysis were employed to compare theoretical with experimental structural parameters.     

Cyclometallated thiosemicarbazone palladium(II) compounds: The first crystal and molecular structures of mononuclear complexes with a η-diphosphine ligand

Treatment of the thiosemicarbazones 2-XC₆H₄C(Me)NN(H)C(S)NHR (R = Me, X = F, a; R = Et, X = F, b; R = Me, X = Cl, c; R = Et, X = Br, d) with potassium tetrachloropalladate(II) in ethanol, lithium tetrachloropalladate(II) in methanol or palladium(II) acetate in acetic acid, as appropriate, gave the tetranuclear cyclometallated complexes [Pd{2-XC₆H₃C(Me)NNC(S)NHR}]₄ (1a-1d). Reaction of 1a-1d with the diphosphines Ph₂PCH₂PPh₂ (dppm), Ph₂P(CH₂)₂PPh₂ (dppe), Ph₂P(CH₂)₃PPh₂ (dppp) or trans-Ph₂PCHCHPPh₂ (trans-dpe) in 1:2 molar ratio gave the dinuclear cyclometallated complexes [{Pd[2-XC₆H₃C(Me)NNC(S)-NHR]}₂(μ-diphosphine-P,P)] (2a-5a, 3b, 3d, 4c, 5c). Reaction of 1a, 1b with the short-bite or long-bite diphosphines, dppm or cis-dpe, in a 1:4 molar ratio gave the mononuclear cyclometallated complexes [Pd{2-XC₆H₃C(Me)NNC(S)NHR}(diphosphine-P)] (6a, 6b, 7a). The molecular structure of ligand a and of complexes 1a, 3d, 5a, 5c, 6a, 6b and 7a have been determined by X-ray diffraction analysis. The structure of complex 7a shows that the long-bite cis-bis(diphenylphosphino)ethene phosphine appears as monodentate with an uncoordinated phosphorus donor atom.     

Facile generation method for conjugated allenyl esters based on retro-Dieckmann-type ring-opening reactions

α-Alkynyl-α-ethoxycarbonyl cyclopentanones 1a-c and cyclohexanones 2a-c were readily synthesized by the reaction of ethyl 2-oxocyclopentanonecarboxylate 6 and ethyl 2-oxocyclohexanonecarboxylate 7 with alkynyllead triacetates 5a-c obtained from lithium acetylides 4a-c and lead tetraacetate. Treatment of 1a-c and 2a-c with 1 N KOH in THF or with n-Bu₄N⁺OEt⁻ in EtOH and THF gave the corresponding conjugated allenyl esters 8a-c, 9a-c, 10a-c, and 11a-c in good to excellent yields, respectively.     

Synthesis of l-azaisotryptophan and its analogs: a general access to new 2-substituted azaindoles

l-(N-Cbz)-7-azaisotryptophan, l-(N-Cbz)-1a, a new isostere of tryptophan, was synthesized by reacting Li₂-(N-Boc)-2-amino-3-picoline, Li₂-(N-Boc)-2a, with appropriately protected l-aspartic acid followed by simple functional group manipulation. This synthetic success led us to access a set of analogs of azaisotryptophan (4a–c; 6a–c) as well as a new class of chiral amines (7a–c; 8a–c) for future application in asymmetric synthesis and design of homochiral ligands. Further, we have generalized the method substantiating a variety of new azaindol-2-yl derivatives (10aa–10lc) with functionalized substituents. In a preliminary luminescence characterization, l-(N-Cbz)-1a has exhibited about 30 nm bathochromic shifted fluorescence emission compared to tryptophan and (N-Cbz)-tryptophan.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

The variability of hydrogen-bonded supramolecular assemblies in crystalline picrates prepared from ferrocenyl-substituted β-aminoalcohols

Ferrocene-based β-aminoalcohols FcCH₂NHCR₂CH₂OH (R = H, 1a; R = Me, 1b) and (S)-FcCH₂NHCH(CHMe₂)CH₂OH (1c; Fc = ferrocenyl) react with 2,4,6-trinitrophenol (Hpic) under proton transfer to afford the corresponding ammonium picrates 2a-c. In the crystal, these picrates associate predominantly via N-H?O and O-H?O bifurcated hydrogen bonds between the NH₂⁺ and OH groups in the aminoalcohol chain as the donors and the phenoxide and NO₂ oxygen atoms of the picrate anion as the acceptors. Compounds 2a and 2b form closed dimeric assemblies [1nH]₂[pic]₂ (n = a, b) around the crystallographic inversion centres. By contrast, their chiral analogue 2c gives rise to monomeric units [1cH][pic] (albeit through similar interactions), that further aggregate into infinite linear chains via N-H?O hydrogen bonds. The formed assemblies are interconnected by the soft C-H?O hydrogen bonds and via π?π stacking interactions of the picrate ions.     

Assembly of diverse structural types of organotellurium compounds in the reactions of (4-MeO-C6H4)2TeO with pyridine carboxylic acids

The reactions of Ar₂TeO (Ar = 4-MeO-C₆H₄) with 2-, 3- and 4-pyridine carboxylic acids (LH) afforded different organotelluroxane structural types depending on the stoichiometry of the reactants and the conditions of the reaction. Ar₂Te(L)OH (1a-1c) are formed in a 1:1 reaction of Ar₂TeO with LH in the presence of water. On the other hand a 1:2 reaction under anhydrous conditions leads to the formation of Ar₂TeL₂ (2a-2c). A 2:2 reaction under anhydrous conditions affords the ditelluroxanes Ar₂Te(L)OTe(L)Ar₂ (3a-3c) while tritelluroxanes Ar₂Te(L)OTeAr₂OTe(L)Ar₂ (4a-4c) are formed in 3:2 reactions. Interestingly, 3a-3c are formed in the reaction of 2a-2c with Ar₂TeO. The former can be hydrolyzed to 1a-1c while the latter upon reaction with Ar₂TeO lead to the formation of the tritelluroxanes 4a-4c. Attempts to metalate 2a with PdCl₂(MeCN)₂ leads to a transfer of the carboxylate ligand to palladium affording Ar₂TeCl₂ and PdL₂. X-ray crystal structures of representative examples of the family of 1, 2 and 3 reveal interesting supramolecular structures and the formation of a novel [TeO]₂ structural unit. The latter results from intermolecular secondary Te?O interactions.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

A flow chemistry route to 2-phenyl-3-(1H-pyrrol-2-yl)propan-1-amines

The Knoevenagel condensation of pyrrole-2-carboxaldehyde (1) with a range of substituted benzyl nitriles (2a-e) afforded rapid access to a family of α,β-unsaturated nitriles (3a-e) in good yields (67-78%). Flow hydrogenation (ThalesNano H-cube™) at 60 °C, 50 bar H₂ pressure, 1.0 mL/min through a 10% Pd-C catalyst selectively, and quantitatively, hydrogenated the olefin double bond (4a-e). Use of a Raney Nickel catalyst at 70 °C, 70 bar H₂ pressure and flow rates of 0.5-1.0 mL/min afforded quantitative conversion into the corresponding saturated amines with the reduction of both the olefin and nitrile bonds (5a-e). The versatility of this approach was further exemplified by reaction of 5a and 5c with norcantharidin to afford acid amide norcantharidin analogues 7 and 8 as novel protein phosphatase 1 and 2A inhibitors.     

A convenient synthesis of benzofuro[3,2-c]isoquinolines and naphtho[1′,2′:4,5]furo[3,2-c]isoquinolines

A convenient method for the preparation of benzofuro[3,2-c]isoquinoline derivatives is described. The condensation reaction of methyl 2-(chloromethyl)-benzoate with substituted salicylonitriles 7a-c and intramolecular cyclization of the resulting substituted methyl 2-[(2-cyanobenzyl)oxy]benzoates 10a-c using potassium tert-butoxide results in the substituted benzofuro[3,2-c]isoquinolin-5(6H)-ones 1a-c. The same sequence of reactions starting from 2-(chloromethyl)benzonitrile and compounds 7a-c gave substituted 5-aminobenzofuro[3,2-c]isoquinolines 13a-c. In addition, this method is useful for the synthesis of other heterocycles. For example, using 1-cyano-2-naphthol 16, instead of the salicylonitriles 7a-c, gives naphtho[1′,2′:4,5]furo[3,2-c]isoquinolines.     

Short-step syntheses and complexation properties of Z,Z-tribenzodidehydro- and all-Z-tribenzo[12]annulenes

Syntheses of all-Z-tribenzo[12]annulenes (1a-c) and Z,Z-tribenzodidehydro[12]annulenes (2a-c) by the reduction of the corresponding tribenzohexadehydro[12]annulenes 3a-c were carried out using a low valent titanium complex generated from Ti(O-i-Pr)₄ and i-PrMgCl. The unique structure of the first reduction products 2a-c as well as 1a-c was fully characterized. Complexation of these annulenes with silver(I) ions produces the corresponding silver complexes. Among them, the silver complexes of 2a-c exhibit interesting monomer-dimer equilibrium.