Dimeric and trimeric diorganosilicon chalcogenides (PhRSiE)2,3 (E = S, Se, Te; R = Ph, Me)

Ph₂SiCl₂ and PhMeSiCl₂ react with Li₂E (E = S, Se, Te) under formation of trimeric diorganosilicon chalcogenides (PhRSiE)₃ (R = Ph: 1a-3a, R = Me: cis/trans-4a (E = S), cis/trans-5a (E = Se)). In case of E = S, Se dimeric four-membered ring compounds (PhRSiE)₂ (R = Ph: 1b-2b, R = Me: cis/trans-4b (E = S), cis/trans-5b (E = Se)) have been observed as by-products. 1a-5b have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹²⁵Te). Four- and six-membered ring compounds differ significantly in ²⁹Si and ⁷⁷Se chemical shifts as well as in the value of ¹J_SiSe.The molecular structures of 2a, 3a and trans-5a reported in this paper are the first examples of compounds with unfused six-membered rings Si₃E₃ (E = Se, Te). The Si₃E₃ rings adopt twisted boat conformations. The crystal structure of 3a reveals an intermolecular Te-Te contact of 3.858 Å which yields a dimerization in the solid state.     

Zwitterionic diiron vinyliminium complexes: Alkylation, metalation and oxidative coupling at the S and Se functionalities

The zwitterionic vinyliminium complex [Fe₂{μ-η¹:η³-C(R′)C(S)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (2a) (R′ = p-Me-C₆H₄ (Tol), Xyl = 2,6-Me₂C₆H₃) undergoes electrophilic addition at the S atom by HSO₃CF₃, MeSO₃CF₃, SiMe₃Cl, BrCH₂Ph, ICH₂CHCH₂ affording the complexes [Fe₂{μ-η¹:η³-C(Tol)C(SX)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][Y] (X =  H, Y = SO₃CF₃, 4a; X = Me, Y = SO₃CF₃, 4b; X = SiMe₃, Y = Cl, 4c; X = CH₂Ph, Y = Br, 4d; X = CH₂CHCH₂, Y = I, 4e).Compound 2a and the corresponding vinyliminium complexes 2b and 2c (R′ = CH₂OH, 2b; R′ = Me, 2c) react also with etherated BF₃ leading to the formation of the corresponding S-adducts [Fe₂{μ-η¹:η³-C(R′)C(SBF₃)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (R′ = Tol, 5a; R′ = CH₂OH, 5b; R′ = Me, 5c).In analogous reactions, the zwitterionic vinyliminium complexes undergo S-metalation upon treatment with in situ generated [Fp]⁺[SO₃CF₃]⁻ [Fp = Fe(CO)₂(Cp)], leading to the formation of [Fe₂{μ-η¹:η³-C(R′)C(S-Fp)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃](R′ = CH₂OH, 6a; R′ = Me, 6b; R′ = Buⁿ, 6c).Similarly, zwitterionic vinyliminium containing Se in the place of S also undergo Se-electrophilic addition. Thus, the complexes [Fe₂{μ-η¹:η³-C(R′)C(SeX)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = X = Me, R′ = Tol, 7a; R = Xyl, R′ = Me, X = Fp⁺, 7b) are obtained upon treatment of the neutral zwitterionic precursors with MeSO₃CF₃ and [Fp][SO₃CF₃], respectively.Alkylation at the S or Se atom of the bridging ligand is also accomplished by CH₂Cl₂, used as solvent, although the reaction is slower compared to more efficient alkylating reagents. The complexes formed by this route are [Fe₂{μ-η¹:η³-C(R′)C(E-CH₂Cl)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][X] [E = S, R = Xyl, R′ = Tol, X = Cl, 8a; E = S, R = Xyl, R′ = Me, X = Cl, 8b; E = Se, R = R′ = Me, X = BPh₄, 8c].Finally, treatment of the zwitterionic vinyliminium complexes with I₂ results in the oxidative coupling with formation of S-S (disulfide) or Se-Se (diselenide) bond. The reactions, performed in the presence of NaBPh₄ afford the tetranuclear complexes [Fe₂{μ-η¹:η³-C(R′)C(E)CN(Me)(R)}(μ-CO)(CO)(Cp)₂]₂[BPh₄]₂ [R = Xyl, R′ = CH₂OH, E = S, 9a; R = Xyl, R′ = Me, E = S, 9b; R = Xyl, R′ = Buⁿ, E = S, 9c; R = Xyl, R′ = Me, E = Se, 9d; R = Me, R′ = Buⁿ, E = Se, 9e].The molecular structures of 4a, 8c and 9e have been determined by X-ray diffraction studies.     

Synthesis and reactivity of asymmetrically substituted ansa-bridged zirconocene complexes: X-ray crystal structures of [Zr{R(H)C(η-C5Me4)(η-C5H4)}Cl2] (R = Bu, Bu) and [Zr{Bu(H)C(η-C5Me4)(η-C5H4)}(CH2Ph)2]

The dialkyl complexes, (R = Prⁱ, R′ = Me (2a), CH₂Ph (3a); R = Buⁿ, R′ = Me (2b), CH₂Ph (3b); R = Bu^t, R′ = Me (2c), CH₂Ph (3c); R = Ph, R′ = Me (2d), CH₂Ph (3d)), have been synthesized by the reaction of the ansa-metallocene dichloride complex, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (R = Prⁱ (1a), Buⁿ (1b), Bu^t (1c), Ph (1d)), and two molar equivalents of the alkyl Gringard reagent. The insertion reaction of the isocyanide reagent, CNC₆H₃Me₂-2,6, into the zirconium-carbon σ-bond of 2 gave the corresponding η²-iminoacyl derivatives, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}{η²-MeCNC₆H₃Me₂-2,6}Me] (R = Prⁱ (4a), Buⁿ (4b), Bu^t (4c), Ph (4d)). The molecular structures of 1b, 1c and 3b have been determined by single-crystal X-ray diffraction studies.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Dimeric allylpalladium(II) complexes with pyrazolate bridges: Synthesis, characterization, structure and thermal behaviour

The synthesis, characterization and thermal behaviour of some new dimeric allylpalladium (II) complexes bridged by pyrazolate ligands are reported. The complexes ; R = H, R′ = C(CH₃)₃ (1b), R = H, R′ = CF₃ (1c); R = CH₃, R′ = CH(CH₃)₂ (2a); R = CH₃, R′ = C(CH₃)₃ (2b); and R = CH₃, R′ = CF₃ (2c)] have been prepared by the room temperature reaction of [Pd(η³-CH₂C(R)CH₂)(acac)](acac = acetylacetonate) with 3,5-disubstituted pyrazoles in acetonitrile solution. The complexes have been characterized by NMR (¹H, ¹³C{¹H}), FT-IR, and elemental analyses. The structure of a representative complex, viz. 2c, has been established by single-crystal X-ray diffraction. The dinuclear molecule features two formally square planar palladium centres which are bridged by two pyrazole ligands and the coordination of each metal centre is completed by allyl substituents. The molecule has non-crystallographic mirror symmetry. Thermogravimetric studies have been carried out to evaluate the thermal stability of these complexes. Most of the complexes thermally decompose in argon atmosphere to give nanocrystals of palladium, which have been characterized by XRD, SEM and TEM. However, complex 2c can be sublimed in vacuo at 2 mbar without decomposition. The equilibrium vapour pressure of 2c has been measured by the Knudsen effusion technique. The vapour pressure of the complex 2c could be expressed by the relation: ln (p/Pa)(±0.06) = −18047.3/T + 46.85. The enthalpy and entropy of vapourization are found to be 150.0 ± 3 kJ mol⁻¹ and 389.5 ± 8 J K⁻¹ mol⁻¹, respectively.     

C-C bond formation by cyanide addition to dinuclear vinyliminium complexes

The diiron vinyliminium complexes [Fe₂{μ-η¹:η³-C(R′)C(H)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Me, R′ = SiMe₃ (1a); R = Me, R′ = CH₂OH (1b); R = CH₂Ph, R′ = Tol (1c), Tol = 4-MeC₆H₄; R = CH₂Ph, R′ = COOMe (1d); R = CH₂Ph, R′ = SiMe₃ (1e)) undergo regio- and stereo-selective addition by cyanide ion (from ), affording the corresponding bridging cyano-functionalized allylidene compounds [Fe₂{μ-η¹:η³-C(R′)C(H)C(CN)N(Me)(R)}(μ-CO)(CO)(Cp)₂] (3a-e), in good yields. Similarly, the diiron vinyliminium complexes [Fe₂{μ-η¹:η³-C(R′)C(R′)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = R′ = Me (2a); R = Me, R′ = Ph (2b); R = CH₂Ph, R′ = Me (2c); R = CH₂Ph, R′ = COOMe (2d)) react with cyanide and yield [Fe₂{μ-η¹:η³-C(R′)C(R′)C(CN)N(Me)(R)}(μ-CO)(CO)(Cp)₂] (9a-d). The reactions of the vinyliminium complex [Fe₂{μ-η¹:η³-C(Tol)CHCN(Me)(4-C₆H₄CF₃)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4) with NaBH₄ and afford the allylidene [Fe₂{μ-C(Tol)C(H)C(H)N(Me)(C₆H₄CF₃)}(μ-CO)(CO)(Cp)₂] (5) and the cyanoallylidene [Fe₂{μ-C(Tol)C(H)C(CN)N(Me)(C₆H₄CF₃)}(μ-CO)(CO)(Cp)₂] (6), respectively. Analogously, the diruthenium vinyliminium complex [Ru₂{μ-η¹:η³-C(SiMe₃)CHCN(Me)(CH₂Ph)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (7) reacts with to give [Ru₂{μ-η¹:η³-C(SiMe₃)CHC(CN)N(Me)(CH₂Ph)}(μ-CO)(CO)(Cp)₂] (8).Finally, cyanide addition to [Fe₂{μ-η¹:η³-C(COOMe)C(COOMe)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (2e) (Xyl = 2,6-Me₂C₆H₃), yields the cyano-functionalized bis-alkylidene complex [Fe₂{μ-η¹:η²-C(COOMe)C(COOMe)(CN)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (10). The molecular structures of 3a and 9a have been elucidated by X-ray diffraction.     

Electronically variable imino-phenanthrolinyl-cobalt complexes; synthesis, structures and ethylene oligomerisation studies

The 2-imino-1,10-phenanthroline ligands, 1,10-C₁₂H₇N₂-2-CRN(2,6-i-Pr₂-4-R¹-C₆H₂) [R = R¹ = H (L1); R = H, R¹ = Br (L2); R = H, R¹ = CN (L3); R = H, R¹ = i-Pr (L4); R = Me, R¹ = H (L5); R = Me, R¹ = i-Pr (L6)], have been prepared in high yield from the condensation reaction of 1,10-C₁₂H₇N₂-2-CRO (R = H, Me) with one equivalent of the corresponding 4-substituted 2,6-diisopropylaniline. The molecular structures of L2, L5 and L6 reveal the imino nitrogen atoms to adopt a transoid configuration with respect to the phenanthrolinyl nitrogen atoms. Treatment of Lx with one equivalent of CoCl₂ in n-BuOH at 90 °C gives the high spin complexes, (Lx)CoCl₂ [Lx = L1 (1a), L2 (1b), L3 (1c), L4 (1d), L5 (1e), L6 (1f)], in which the metal centres exhibit distorted square pyramidal geometries. Activation of 1a-1f with excess methylaluminoxane (MAO) gives catalysts that are modestly active for the oligomerisation of ethylene affording mainly linear α-olefins along with some degree of internal olefins. While the donor capability of the 4-position of the N-aryl group does not appear to affect the activity of the catalyst, it does have an influence on the ratio of α-olefins to internal olefins. Single crystal X-ray diffraction studies have been performed on L2, L5, L6, 1a, 1c and 1f.     

Nitrile ligands activation in dinuclear aminocarbyne complexes

The diiron complexes [Fe(Cp)(CO){μ-η²:η²-C[N(Me)(R)]NC(C₆H₃R′)CCH(Tol)}Fe(Cp)(CO)] (R = Xyl, R′ = H, 3a; R = Xyl, R′ = Br, 3b; R = Xyl, R′ = OMe, 3c; R = Xyl, R′ = CO₂Me, 3d; R = Xyl, R′ = CF₃, 3e; R = Me, R′ = H, 3f; R = Me, R′ = CF₃, 3g) are obtained in good yields from the reaction of [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(p-NCC₆H₄R′)(Cp)₂]⁺ (R = Xyl, R′ = H, 2a; R = Xyl, R′ = Br, 2b; R = Xyl, R′ = OMe, 2c; R = Xyl, R′ = CO₂Me, 2d; R = Xyl, R′ = CF₃, 2e; R = Me, R′ = H, 2f; R = Me, R′ = CF₃, 2g) with TolCCLi. The formation of 3 involves addition of the acetylide at the coordinated nitrile and C-N coupling with the bridging aminocarbyne together with orthometallation of the p-substituted aromatic ring and breaking of the Fe-Fe bond. Complexes 3a-e which contain the N(Me)(Xyl) group exist in solution as mixtures of the E-trans and Z-trans isomers, whereas the compounds 3f,g, which posses an exocyclic NMe₂ group, exist only in the Z-cis form. The crystal structures of Z-trans-3b, E-trans-3c, Z-trans-3e and Z-cis-3g have been determined by X-ray diffraction experiments.     

New diruthenium vinyliminium complexes from the insertion of alkynes into bridging aminocarbynes

Primary alkynes R′CCH [R′ = Me₃Si, Tol, CH₂OH, CO₂Me, (CH₂)₄CCH, Me] insert into the metal-carbon bond of diruthenium μ-aminocarbynes [Ru₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] [R = 2,6-Me₂C₆H₃ (Xyl), 1a; CH₂Ph (Bz), 1b; Me, 1c] to give the vinyliminium complexes [Ru₂{μ-η¹:η³-C(R′)CHCN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] [R = Xyl, R′ = Me₃Si, 2a; R = Bz, R′ = Me₃Si, 2b; R = Me, R′ = Me₃Si, 2c; R = Xyl, R′ = Tol, 3a; R = Bz, R′ = Tol, 3b; R = Bz, R′ = CH₂OH, 4; R = Bz, R′ = CO₂Me, 5a; R = Me, R′ = CO₂Me, 5b; R = Xyl, R′ = (CH₂)₄CCH, 6; R = Xyl, R′ = Me, 7a; R = Bz, R′ = Me, 7b; R = Me, R′ = Me, 7c]. The related compound [Ru₂{μ-η¹:η³-C[C(Me)CH₂]CHCN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃], (9) is better prepared by reacting [Ru₂{μ-CN(Me)(Xyl)}(μ-CO)(CO)(Cl)(Cp)₂] (8) with AgSO₃CF₃ in the presence of HCCC(Me)CH₂ in CH₂Cl₂ at low temperature.In a similar way, also secondary alkynes can be inserted to give the new complexes [Ru₂{μ-η¹:η³-C(R′)C(R′)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = Bz, R′ = CO₂Me, 11; R = Xyl, R′ = Et, 12a; R = Bz, R′ = Et, 12b; R = Xyl, R′ = Me, 13). The reactions of 2-7, 9, 11-13 with hydrides (i.e., NaBH₄, NaH) have been also studied, affording μ-vinylalkylidene complexes [Ru₂{μ-η¹:η³-C(R′)C(R″)C(H)N(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Bz, R′ = Me₃Si, R″ = H, 14a; R = Me, R′ = Me₃Si, R″ = H, 14b; R = Bz, R′ = Tol, R″ = H, 15; R = Bz, R′ = R″ = Et, 16), bis-alkylidene complexes [Ru₂{μ-η¹:η²-C(R′)C(H)(R″)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (R′ = Me₃Si, R″ = H, 17; R′ = R″ = Et, 18), acetylide compounds [Ru₂{μ-CN(Me)(R)}(μ-CO)(CO)(CCR′)(Cp)₂] (R = Xyl, R′ = Tol, 19; R = Bz, R′ = Me₃Si, 20; R = Xyl, R′ = Me, 21) or the tetranuclear species [Ru₂{μ-η¹:η²-C(Me)CCN(Me)(Bz)}(μ-CO)(CO)(Cp)₂]₂ (23) depending on the properties of the hydride and the substituents on the complex. Chromatography of 21 on alumina results in its conversion into [Ru₂{μ-η³:η¹-C[N(Me)(Xyl)]C(H)CCH₂}(μ-CO)(CO)(Cp)₂] (22). The crystal structures of 2a[CF₃SO₃] · 0.5CH₂Cl₂, 12a[CF₃SO₃] and 22 have been determined by X-ray diffraction studies.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Hydride addition at μ-vinyliminium ligand obtained from disubstituted alkynes

New μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Me, R′ = R″ = Me, 3a; R = Me, R′ = R″ = Et, 3b; R = Me, R′ = R″ = Ph, 3c; R = CH₂Ph, R′ = R″ = Me, 3d; R = CH₂Ph, R′ = R″ = COOMe, 3e; R = CH₂ Ph, R′ = SiMe₃, R″ = Me, 3f) have been obtained b yreacting the corresponding vinyliminium complexes [Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (2a-f) with NaBH₄. The formation of 3a-f occurs via selective hydride addition at the iminium carbon (C_α) of the precursors 2a-f. By contrast, the vinyliminium cis-[Fe₂{μ-η¹:η³-C_γ (R′) = C_β(R″)C_α = N(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R′ = R″ = COOMe, 4a; R′ = R″ = Me, 4b; R′ = Prⁿ, R″ = Me, 4c; Prⁿ = CH₂CH₂CH₃, Xyl = 2,6-Me₂C₆H₃) undergo H⁻ addition at the adjacent C_β, affording the bis-alkylidene complexes cis-[Fe₂{μ-η¹:η²-C(R′)C(H)(R″)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (5a-c). The cis and trans isomers of [Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4d) react differently with NaBH₄: the former reacts at C_α yielding cis-[Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], 6a, whereas the hydride attack occurs at C_β of the latter, leading to the formation of the bis alkylidene trans-[Fe₂{μ-η¹:η²-C(Et)C(H)(Et)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (5d). The structure of 5d has been determined by an X-ray diffraction study. Other μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (R′ = R″ = Ph, 6b; R′ = R″ = Me, 6c) have been prepared, and the structure of 6c has been determined by X-ray diffraction. Compound 6b results from treatment of cis-[Fe₂{μ-η¹:η³-C_γ(Ph)C_β(Ph)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4e) with NaBH₄, whereas 6c has been obtained by reacting 4b with LiHBEt₃. Both cis-4d and trans-4d react with LiHBEt₃ affording cis-6a.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Facile synthesis of achiral and chiral PCN pincer palladium(II) complexes and their application in the Suzuki and copper-free Sonogashira cross-coupling reactions

Five non-symmetrical PCN pincer palladium(II) complexes [PdCl{C₆H₃-2-(CHNR)-6-()}] (R = m-ClC₆H₄, R′ = Ph (2a); R = Ph, R′ = Ph (2b); R = i-Pr, R′ = Ph (2c); R = m-ClC₆H₄, R′ = i-Pr (2d); R = (S)-1-phenylethyl, R′ = Ph (2e)) have been easily prepared in only two steps from readily available m-hydroxybenzaldehyde and characterized by HRMS, ¹H NMR, ¹³C NMR, ³¹P NMR and IR spectra. The molecular structures of 2a and 2b have been further determined by X-ray single-crystal diffraction. The obtained Pd complexes were found to be effective catalysts for the Suzuki and copper-free Sonogashira cross-coupling reactions which could be carried out in the undried solvent under air.     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

Olefin-aminocarbyne coupling in diiron complexes: Synthesis of new bridging aminoallylidene complexes

The bridging aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (R = Me, 1a; Xyl, 1b; 4-C₆H₄OMe, 1c; Xyl = 2,6-Me₂C₆ H₃) react with acrylonitrile or methyl acrylate, in the presence of Me₃NO and NaH, to give the corresponding μ-allylidene complexes [Fe₂{μ-η¹:η³- C_α(N(Me)(R))C_β(H)C_γ(H)(R′)}(μ-CO)(CO)(Cp)₂] (R = Me, R′ = CN, 3a; R = Xyl, R′ = CN, 3b; R = 4-C₆H₄OMe, R′ = CN, 3c; R = Me, R′ = CO₂Me, 3d; R = 4-C₆H₄OMe, R′ = CO₂Me, 3e). Likewise, 1a reacts with styrene or diethyl maleate, under the same reaction conditions, affording the complexes [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(R′)C_γ(H)(R″)}(μ-CO)(CO)(Cp)₂] (R′ = H, R″ = C₆H₅, 3f; R′ = R″ = CO₂Et, 3g). The corresponding reactions of [Ru₂{μ-CN(Me)(CH₂Ph)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (1d) with acrylonitrile or methyl acrylate afford the complexes [Ru₂{μ-η¹:η³-C_α(N(Me)(CH₂Ph))C_β(H)C_γ(H)(R′)}(μ-CO)(CO)(Cp)₂] (R′ = CN, 3h; CO₂Me, 3i), respectively.The coupling reaction of olefin with the carbyne carbon is regio- and stereospecific, leading to the formation of only one isomer. C-C bond formation occurs selectively between the less substituted alkene carbon and the aminocarbyne, and the C_β-H, C_γ-H hydrogen atoms are mutually trans.The reactions with acrylonitrile, leading to 3a-c and 3h involve, as intermediate species, the nitrile complexes [M₂{μ-CN(Me)(R)}(μ-CO)(CO)(NC-CHCH₂)(Cp)₂][SO₃CF₃] (M = Fe, R = Me, 4a; M = Fe, R = Xyl, 4b; M = Fe, R = 4-C₆H₄OMe, 4c; M = Ru, R = CH₂C₆H₅, 4d).Compounds 3a, 3d and 3f undergo methylation (by CH₃SO₃CF₃) and protonation (by HSO₃CF₃) at the nitrogen atom, leading to the formation of the cationic complexes [Fe₂{μ-η¹:η³-C_α(N(Me)₃)C_β(H)C_γ(H)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = CN, 5a; R = CO₂Me, 5b; R = C₆H₅, 5c) and [Fe₂{μ-η¹:η³-C_α(N(H)(Me)₂)C_β(H)C_γ(H)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = CN, 6a; R = CO₂Me, 6b; R = C₆H₅, 6c), respectively.Complex 3a, adds the fragment [Fe(CO)₂(THF)(Cp)]⁺, through the nitrile functionality of the bridging ligand, leading to the formation of the complex [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(H)C_γ(H)(CNFe(CO)₂Cp)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (9).In an analogous reaction, 3a and [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃], in the presence of Me₃NO, are assembled to give the tetrameric species [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(H)C_γ(H)(CN[Fe₂{μ- CN(Me)(R)}(μ-CO)(CO)(Cp)₂])}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = Me, 10a; R = Xyl, 10b; R = 4-C₆H₄OMe, 10c).The molecular structures of 3a and 3b have been determined by X-ray diffraction studies.     

C-C bond formation through olefin-thiocarbyne coupling in diiron complexes

The bridging diiron thiocarbyne complex [Fe₂{μ-CS(Me)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (1) reacts with activated olefins (methyl acrylate, acrylonitrile, styrene, diethyl maleate), in the presence of Me₃NO and NaH, to give the corresponding μ-allylidene complexes [Fe₂{μ-η¹:η³-C_α(SMe)C_β(R′)C_γ(H)(R″)} (μ-CO)(CO)(Cp)₂] (R″ = CO₂Me, R′ = H, 3a; R″ = CN, R′ = H, 3b; R″ = C₆H₅, R′ = H, 3c; R″ = R′ = CO₂Et, 3d). The coupling reaction of olefin with thiocarbyne is regio- and stereospecific, leading to the formation of only one isomer. C-C bond formation occurs between the less substituted alkene carbon and the thiocarbyne. Moreover, olefinic hydrogens of the bridging ligands are mutually trans.The reactions of 3a-b with MeSO₃CF₃ result, selectively, in the formation of the cationic μ-sulphonium allylidene complexes [Fe₂{μ-η¹:η³-C_α(SMe₂)C_β (H)C_γ(H)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = CO₂Me, 4a; R = CN, 4b). Compound 4a undergoes displacement of the SMe₂ group by nucleophiles such as NaBH₄, NBu₄CN and NaOMe, affording the complexes [Fe₂{μ-η¹:η³-C_α(R)C_β (H)C_γ(H)(CO₂Me)}(μ-CO)(CO)(Cp)₂] (R = H, 5a; R = CN, 5b; R = OMe, 5c), respectively. The molecular structures of 3a and 5a have been determined by X-ray diffraction studies.     

Reactivity studies of (η-arene)ruthenium dimeric complexes towards pyrazoles: isolation of amidines, bis pyrazoles and chloro bridged pyrazole complexes

The complex [(η⁶-p-cymene)Ru(μ-Cl)Cl]₂1 reacts with pyrazole ligands (3a-g) in acetonitrile to afford the amidine derivatives of the type [(η⁶-p-cymene)Ru(L)(3,5-HRR′pz)](BF4)₂ (4a-f), where L = {HNC(Me)3,5-RR′pz}; R, R′ = H (4a); H, CH₃ (4b); C₆H₅ (4c); CH₃, C₆H₅ (4d) OCH₃ (4e); and OC₂H₅ (4f), respectively. The ligand L is generated in situ through the condensation of 3,5-HRR′pz with acetonitrile under the influence of [(η⁶-p-cymene)RuCl₂]₂. The complex [(η⁶-C₆Me₆)Ru(μ-Cl)Cl]₂2 reacts with pyrazole ligands in acetonitrile to yield bis-pyrazole derivatives such as [(η⁶-C₆Me₆)Ru (3,5-HRR′pz)₂Cl](BF₄) (5a-b), where R, R′ = H (5a); H, CH₃ (5b), as well as dimeric complexes of pyrazole substituted chloro bridged derivatives [{(η⁶-C₆Me₆)Ru(μ-Cl) (3,5-HRR′pz)}₂](BF₄)₂ (5c-g), where R, R′ = CH₃ (5c); C₆H₅ (5d); CH₃, C₆H₅ (5e); OCH₃ (5f); and OC₂H₅ (5g), respectively. These complexes were characterized by FT-IR and FT-NMR spectroscopy as well as analytical data. The molecular structures¹ of representative complexes [(η⁶-C₆Me₆)Ru{3(5)-Hmpz}₂Cl]⁺5b, [(η⁶-C₆Me₆)Ru(μ-Cl)(3,5-Hdmpz)]₂²⁺5c and [(η⁶-C₆Me₆)Ru(μ-Cl){3(5)Me,5(3)Ph-Hpz}]₂²⁺5e were established by single crystal X-ray diffraction studies.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Group 12 metal aryl selenolates. Crystal and molecular structure of [2-(Et2NCH2)C6H4]2Se2 and [2-(Me2NCH2)C6H4Se]2M (M = Zn, Cd)

Diorganodiselenide [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) was obtained by hydrolysis/oxidation of the corresponding [2-(Et₂NCH₂)C₆H₄]SeLi derivative. The treatment of [2-(Et₂NCH₂)C₆H₄]₂Se₂ with elemental sodium in THF resulted in [2-(Et₂NCH₂)C₆H₄]SeNa (2). Reactions between alkali metal selenolates [2-(R₂NCH₂)C₆H₄]SeM′ (R = Me, Et; M′ = Li, Na) and MCl₂ (M = Zn, Cd) in a 2:1 molar ratio resulted in the [2-(R₂NCH₂)C₆H₄Se]₂M species [R = Me, M = Zn (3), Cd (4); R = Et, M = Zn (5), Cd (6)]. The new compounds were characterized by multinuclear NMR (¹H, ¹³C, ⁷⁷Se, ¹¹³Cd) and mass spectrometry. The crystal and molecular structures of 1, 3 and 4 revealed monomeric species stabilized by N → Se (for 1) and N → M (for 3 and 4) intramolecular interactions.     

Palladium(II)/allylpalladium(II) complexes with xanthate ligands: Single-source precursors for the generation of palladium sulfide nanocrystals

In an effort to find simple and common single-source precursors for palladium sulfide nanostructures, palladium(II) complexes, [Pd(S₂X)₂] (X = COMe (1), COⁱPr (2)) and η³-allylpalladium complexes with xanthate ligands, [(η³-CH₂C(CH₃)CR₂)Pd(S₂X)] (R = H, X = COMe (3); R = H, X = COEt (4); R = H, X = COⁱPr (5); R = CH₃, X = COMe (6)), have been investigated. The crystal structures of [Pd(S₂X)₂] (X = COMe (1), CoⁱPr (2)) and [(η³-CH₂C(CH₃)CH₂)Pd(S₂COMe)] (3) have been established by single crystal X-ray diffraction analysis. The complexes, 1, 2 and 3 all contain a square planar palladium(II) centre. In the allyl complex 3, this is defined by the two sulfurs of the xanthate and the outer carbons of the 2-methylallyl ligand, while in the complexes, 1 and 2 it is defined by the four sulfur atoms of the xanthate ligand. Thermogravimetric studies have been carried out to evaluate the thermal stability of η³-allylpalladium(II) analogues. The complexes are useful precursors for the growth of nanocrystals of PdS either by furnace decomposition or solvothermolysis in dioctyl ether. The solvothermal decomposition of complexes in dioctyl ether gives a new metastable phase of PdS which can be transformed to the more stable tetragonal phase at 320 °C. The nanocrystals obtained have been characterized by PXRD, SEM, TEM and EDX.