Spectrophotometric study of the reaction mechanism between DDQ as pi-acceptor and potassium iodate and flucloxacillin and dicloxacillin drugs and their determination in pure and in dosage forms

Two simple and accurate spectrophotometric methods are presented for the determination of beta-lactam drugs, flucloxacillin (Fluclox) and dicloxacillin (Diclox), in pure and in different pharmaceutical preparations. The charge transfer (CT) reactions between Fluclox and Diclox as electron donors and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) pi-acceptor and potassium iodate via oxidation reduction reaction where the highly coloured complex species or the liberated iodine have been spectrophotometrically studied. The optimum experimental conditions have been studied carefully. Beer's law is obeyed over the concentration range of 2-450 microg ml(-1) for Fluclox and 10-450 microg ml(-1) for Diclox using DDQ reagent and at 50-550 microg ml(-1) for Fluclox and 50-560 microg ml(-1) for Diclox using iodate method, respectively. For more accurate results, Ringbom optimum concentration range is calculated and found to be 6-450 and 15-450 microg ml(-1) for Fluclox and Diclox using DDQ, respectively, and 65-550 and 63-560 microg ml(-1) for Fluclox and Diclox using iodine, respectively. The Sandell sensitivity is found to be 0.018 and 0.011 microg cm(-2) for DDQ method and 0.013 and 0.011 microg cm(-2) for iodate method for Fluclox and Diclox, respectively, which indicates the high sensitivity of both methods. Standard deviation (S.D.=0.01-0.80 and 0.07-0.98) and relative standard deviation (R.S.D.=0.13-0.44 and 0.11-0.82%) (n=5) for DDQ and iodate methods, respectively, refer to the high accuracy and precision of the proposed methods. These results are also confirmed by between-day precision of percent recovery of 99.87-100.2 and 99.90-100% for Fluclox and Diclox by DDQ method and 99.88-100.1 and 99.30-100.2% for Fluclox and Diclox by iodate method, respectively. These data are comparable to those obtained by British and American pharmacopoeias assay for the determination of Fluclox and Diclox in raw materials and in pharmaceutical preparations.     

Spectrophotometric study of the reaction mechanism between DDQ Pi- and iodine sigma-acceptors and chloroquine and pyrimethamine drugs and their determination in pure and in dosage forms

Two simple and accurate spectrophotometric methods are presented for the determination of anti-malarial drugs, chloroquine phosphate (CQP) and pyrimethamine (PYM), in pure and in different pharmaceutical preparations. The charge transphere (CT) reactions between CQP and PYM as electron donors and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) pi-acceptor and iodine sigma-acceptor reagents to give highly coloured complex species have been spectrophotometrically studied. The optimum experimental conditions have been studied carefully. Beer' law is obeyed over the concentration range of 1.0-15 microg ml(-1) for CQP and 1.0-40 microg ml(-1) for PYM using I(2) and at 5.0-53 microg ml(-1) for CQP and 1.0-46 microg ml(-1) for PYM using DDQ reagents, respectively. For more accurate results, Ringbom optimum concentration range is calculated and found to be 10-53 and 8-46 microg ml(-1) for CQP and PYM using DDQ, respectively and 5-15 and 8-40 microg ml(-1) for CQP and PYM using iodine, respectively. The Sandell sensitivity is found to be 0.038 and 0.046 g cm(-2) for DDQ method and 0.0078 and 0.056 g cm(-2) for I(2) method for CQP and PYM, respectively which indicates the high sensitivity of both methods. Standard deviation (S.D.=0.012-0.014 and 0.013-0.015) and relative standard deviation (R.S.D.=0.09-1.4 and 1.3-1.5%) (n=5) for DDQ and I(2) methods respectively, refer to the high accuracy and precision of the proposed methods. These results are also confirmed by between day precision of percent recovery of 99-100.6%, and 98-101% for CQP and PYM by DDQ method and 99-102% and 99.2-101.4% for CQP and PYM by I(2) method respectively. These data are comparable to those obtained by British and American pharmacopoeias assay for the determination of CQP and PYM in raw materials and in pharmaceutical preparations.     

Epoxy and polyurethane adhesive materials of elad,aquapol, and acrolat brands and their components

Different groups of chemical products developed and produced at the Macromer Scientific and Manufacturing Company are described and recommended for use in adhesive compositions, including reactive diluents for epoxy compositions, urethane prepolymers, binders for photocurable materials, aqueous polyurethane dispersions. The main characteristics of binders for glues are presented, as well as the prospects for their application in formulas of adhesive compositions.     

Separation of niobium and tantalum with benzo- and phenylacetylhydroxamic acids

Benzohydroxamic acid (I) or phenylacetylhydroxamic acid (II) is suggested for the quantitative separation of tantalum from niobium in an oxalate solution. The tantalum precipitate must be ignited for weighing; niobium is determined in the filtrate with another reagent. The pH range for complete separation is 4.0–6.4 for I and 4.5–6.2 for II. Single precipitation is satistactory for Nb: Ta ratios of 18 : 1 to 1 : 20 for I, and 8 : 1 to 1 : 23 for II. Titanium, zirconium, tartrate, citrate and a large excess of oxalate interfere.     

Tune-out and magic wavelengths for hydrogenlike and screened-hydrogenlike atoms

The tune-out and magic wavelengths (TMWs) for the hydrogenlike and screened-hydrogenlike atoms (Z = 1-8) are calculated using a variational method. The first three tune-out wavelengths for each of the nS (n = 1, 2, 3) states and the first three magic wavelengths for each of the 1S-nS (n = 2, 3) transitions of the hydrogenlike atoms in terms of nuclear charge Z, and the first TMWs for the above mentioned states or transitions of the screened-hydrogenlike atoms in terms of the screening parameter μ and Z are presented. All the results for the TMWs are reported for the first time in the literature except the magic wavelengths for the hydrogen atom. The magic wavelengths for hydrogen atom are in agreement with the available data. The precise estimation of the TMWs would be helpful for the design of the ion-trapping experiment of the hydrogenic systems. Our study is expected to be useful for the measurements of the hydrogenic 1S-2S and 1S-3S transitions spectroscopy for the improved accuracy.     

Structural and adsorption characteristics and catalytic activity of titania and titania-containing nanomaterials

Morphological, structural, adsorption, and catalytic properties of highly disperse titania prepared using sulfate and pyrogenic methods, and fumed titania-containing mixed oxides, were studied using XRD, TG/DTA, nitrogen adsorption, (1)H NMR, FTIR, microcalorimetry on immersion of oxides in water and decane, thermally stimulated depolarization current (TSDC) and catalytic photodecomposition of methylene blue (MB). Phase composition and aggregation characteristics of nanoparticles (pore size distribution) of sulfate and pyrogenically prepared titania are very different; temperature dependent structural properties are thus very different. Catalytic activity for the photodecomposition of MB is greatest (per gram of TiO(2) for the pure oxide materials) for non-treated ultrafine titania PC-500, which has the largest S(BET) value and smallest particle size of the materials studied. However, this activity calculated per m(2) is higher for PC-105, possessing a much smaller S(BET) value than PC-500. The activity per unit surface area of titania is greatest for the fumed silica-titania mixed oxide ST20. Calcination of PC-500 at 650 degrees C leads to enhancement of anatase content and catalytic activity, but heating at 800 and 900 degrees C lowers the anatase content (since rutile appears) and diminishes catalytic activity, as well as the specific surface area because of nanoparticle sintering.     

Laboratory guidelines and standards in clinical and forensic toxicology

An overview is given of the existing standards and guidelines for analytical toxicology. Details about guidelines concerning forensic toxicology, clinical toxicology, point-of-care testing, and an area of overlap are provided. Guidelines and standards exist for forensic toxicological analysis in general and for specific situations, e.g., workplace drug testing and driving under the influence of drugs and alcohol. For workplace drug testing, detailed guidelines exist in the U.S.A., Australia, and Europe describing for example the methods used, their cut-off and the process of sample handling. Some governments describe the methods and quality requirements for blood alcohol testing for driving under the influence of alcohol in detail in their laws. In the area of clinical toxicology, guidelines not only focus on the analytical aspects of analysis but also on the timeliness of results. According to the US- and UK-based practice guidelines for the emergency department, the turn-around time should be 1 or 2 h, respectively, for a specific set of analytes. Guidelines are either being developed now or already available (e.g., workplace drug testing, breath alcohol analysis) for point-of-care testing in analytical toxicology. In the context of brain death and sexual assault cases, specific demands need to be imposed because of the unique aspects of drug analysis in these situations (variety of drugs used, low concentrations). Many guidelines and standards are available and it is up to every laboratory to choose the best ones depending on the area of activity and the legal and regulatory environment.Presented at the 10th Conference Quality in the Spotlight, March 2005, Antwerp, Belgium     

Nanomaterials and nanotechnologies in chemical and biochemical sensors: Capabilities and applications

The publications reporting on the use of nanomaterials and nanotechnologies in chemical and biochemical sensor designing were reviewed for the recent decade. The capabilities and applications were discussed for nanoparticles based on gold, silver, magnetic and semiconductor materials (quantum dots), lanthanides, and silica compounds, as well as for nanotubes and nanolayers (Langmuir-Blodgett films, selfassembled monolayers) used in optical (absorbance, luminescence, surface enhanced Raman spectroscopy, surface plasmon resonance), electrochemical, and mass-sensitive sensors. It was shown that the unique capabilities of nanosensors might hold the key to improve the analysis of liquids, gases, and especially biochemical and biological objects in the near future.     

Extraction and flame spectrophotometric determination of palladium and rhodium

Solvent extraction methods involving toluene, chloroform, 4-methyl-2-pentanone and pentyl acetate were studied for palladium and rhodium chelates. The palladiurn-salicylaldoxime chelate was extracted quantitatively into 4-methyl-2-pentanone at pH 3. The rhodium-diethyldithiocarbamate chelate was completely extracted into 4-methyl-2-pentanone at pH 8. The optimum combustion conditions for each of the organic extracts were then studied. The position of maximum emission intensity in the flame mantle was determined for each chelate and solvent system ; readings were taken at 363.5 mμ for palladium, and 369.2 mμ for rhodium. For palla-dium, when 4-methyl-2-pentanone was used instead of water as solvent, the emission intensity increased 21-fold. For rhodium, this kctone increased the sensitivity 27 times compared with water. A method is suggested for the separation and determination of palladium and rhodium in the same sample.     

Circular dichroism and conformational dynamics of cephams and their carba and oxa analogues

The biological activity of bicyclic beta-lactam antibiotics depends strongly on the absolute configuration of the bridgehead carbon atom. Frelek and co-workers proposed an empirical helicity rule relating the configuration of the bridgehead carbon atom to the sign of the 220 nm band in the electronic circular dichroism (CD) spectrum of beta-lactams. Here we use synthetic organic chemistry, CD spectroscopy, and time-dependent density functional theory (TDDFT) to investigate the validity of this structure-property relationship for eight model compounds. For conformationally flexible beta-lactams, substantial thermal effects are found which must be included in calculations. To this end, we combine TDDFT calculations of CD with full quantum-mechanical Born-Oppenheimer molecular dynamics (MD) simulations for the first time. The CD spectra are sampled with ground-state density functional trajectories of up to 60 ps. The MD simulations show a surprisingly high sensitivity of the CD to the molecular conformation. On the other hand, the relation between CD and thermally averaged structural parameters is much less complex. While the helicity rule does not seem to hold for individual conformers, it is confirmed by the calculations for seven out of eight systems studied if thermally averaged CD spectra and structures are considered. Since thermal effects on CD can be larger than typical inherent inaccuracies of TDDFT, our results emphasize the need for a systematic treatment of conformational dynamics in CD calculations even for moderately flexible systems. Temperature-dependent CD measurements are very useful for this purpose. Our results also suggest that CD spectroscopy may be used as a sensitive probe of conformational dynamics if combined with electronic structure calculations.     

NaP4及其正负离子的结构和光谱性质

用密度泛函理论(DFT)分析了NaP4及其正负离子的低级电子态的平衡结构、振动频率、能量、原子化能、绝热电子亲合能、绝热离子势等, 并与实验所得的阴离子光电子能谱进行比较. 根据计算结果与实验所得的激发能进行比较, 对NaP-4的阴离子光电子能谱中的峰进行了合理的归属.     

Efficient and Sensitive Method for Quantitative Determination and Validation of Umbelliferone, Carvone and Myristicin in Anethum graveolens and Carum carvi Seed

An efficient HPTLC method for the analysis of umbelliferone, carvone and myristicin in Anethum graveolens and Carum carvi seed was developed. The method employed HPTLC plates precoated with silica gel 60 F₂₅₄ as the stationary phase. Methanol extracts of seeds from three different sources were used. The calibration plot for umbelliferone, carvone and myristicin were linear with the correlation coefficient of 0.997 ± 0.016, 0.999 ± 0.009 and 0.999 ± 0.013, respectively, which were indicative of good linear dependence of peak area on concentration. The method permits reliable quantification of umbelliferone, carvone and myristicin and showed good resolution and separation. The method was validated as per ICH guidelines. To study the accuracy of the method, recovery studies were performed by the method of standard addition at three different levels and the average percentage recovery was found to be 99.05% for umbelliferone, 100.28% for carvone and 99.8% for myristicin. The proposed HPTLC method for quantitative monitoring of umbelliferone, carvone and myristicin in A. graveolens and C. carvi seed can be used for routine quality testing of these extracts.     

Spectrophotometric and chromatographic determination of sulfanilamides in biological fluids and pharmaceuticals

The conditions for the determination of norsulfazol (I), sulfadimezine (II), ethazole (III), sulfamethoxypyridazine (IV), sulfadimethoxine (V), sodium sulfacyl (VI), sulfalene (VII), sulgin (VIII), and bucarban (IX) as their derivatives of 4,6-dinitrobenzofuroxan using spectrophotometry and thin-layer chromatography were selected. The best results were obtained at 490–500 nm using polar solvents and their aqueous mixtures of pH 6.68 as analytical media. The analytical range for sulfanilamides was 0.5–6.0 Μg/mL. The limits of detection (Μg/mL) were 0.24 for 1,0.28 for II, 0.43 for III, 0.18 for IV, 0.25 for V, 0.54 for VI, 0.54 for VII, 0.17 for VII, and 0.31 for IX. Sulfanilamides were determined in Pharmaceuticals (tablets, ointments, and drops) and biological fluids (protein hydrolyzates, urine, blood serum, and whole blood). A simple rapid method for the determination of the phenotype of biotransformation by the type of acetylation was developed based on the studies of the kinetics of the excretion of II from the human body with urine.     

Formation and stability of prolinol and prolinol ether enamines by NMR: delicate selectivity and reactivity balances and parasitic equilibria

Enamine key intermediates in organocatalysis, derived from aldehydes and prolinol or J?rgensen-Hayashi-type prolinol ether catalysts, were generated in different solvents and investigated by NMR spectroscopy. Depending on the catalyst structure, trends for their formation and amounts are elucidated. For prolinol catalysts, the first enamine detection in situ is presented and the rapid cyclization of the enamine to the oxazolidine ("parasitic equilibrium") is monitored. In the case of diphenylprolinol, this equilibrium is fully shifted to the endo-oxazolidine ("dead end") by the two geminal phenyl rings, most probably because of the Thorpe-Ingold effect. With bulkier and electron-withdrawing aryl rings, however, the enamine is stabilized relative to the oxazolidine, allowing for the parallel detection of the enamine and the oxazolidine. In the case of prolinol ethers, the enamine amounts decrease with increasing sizes of the aryl meta-substituents and the O-protecting group. In addition, for small aldehyde alkyl chains, Z-configured enamines are observed for the first time in solution. Prolinol silyl ether enamines are evidenced to undergo slow desilylation and subsequent rapid oxazolidine formation in DMSO. For unfortunate combinations of aldehydes, catalysts, solvents, and additives, the enamine formation is drastically decelerated but can be screened for by a rapid and facile NMR approach. Altogether, especially by clarifying the delicate balances of catalyst selectivity and reactivity, our NMR spectroscopic findings can be expected to substantially aid synthetically working organic chemists in the optimization of organocatalytic reaction conditions and of prolinol (ether) substitution patterns for enamine catalysis.     

Enzyme fingerprints of activity,and stereo- and enantioselectivity from fluorogenic and chromogenic substrate arrays

A series of stereochemically and structurally diverse fluorogenic and chromogenic substrates for hydrolytic enzymes has been synthesized and used to characterize enzyme activity profiles of esterases, lipases, proteases, peptidases, phosphatases, and epoxide hydrolases. The substrates used are particularly resilient to nonspecific reactions due to their mechanism of activation. The activities recorded with the individual substrates are therefore remarkably reproducible, and enable us to use the overall pattern of activity as a specific fingerprint for the enzyme sample. Fingerprints of activity, and enantio- and stereoselectivity are displayed as arrays of color-scale squares that are easily analyzed visually. Such fingerprints might be useful for quality control, enzyme discovery, and possibly for addressing the issue of functional convergence in enzymes.     

Interactions between temozolomide and guanine and its S and Se‐substituted analogues

Temozolomide was paired with guanine, 6‐selenoguanine, and 6‐thioguanine, as well as the SH tautomer of the latter. The potential energy surface of each heterodimer was searched for all minima, using Dispersion‐Corrected Density Functional Theory and MP2 methods. Among the dozens of minima, three categories were observed. Stacked geometries place the aromatic systems of the two molecules parallel to one another, while the two systems are roughly perpendicular to one another in a second category. Also found are coplanar structures held together by H‐bonds. Dispersion proves to be a dominating attractive force for the stacked structures, less so for perpendicular, and smallest for the coplanar dimers. Geometries and energetics are relatively insensitive to S and Se substitution, but tautomerization reverses relative stabilities of different geometries.     

AB initio and Dft investigations of Al, Ga, and In tricyanides and triisocyanides

Structural parameters, standard entropies, and vibrational spectra of cyanides and isocyanides of trivalent AI, Ga, and In were obtained for the first time by ab initio and B3LYP density functional methods. The isocyanide form is found to be preferable for Al; for Ga and In, the cyanide form is more stable. The considerable discrepancy between the results obtained by the SCF and B3LYP methods shows that it is important to take electron correlation energy into account; however, a comparison between the DZP and LANL2DZP basis sets demonstrates that basis sets with the effective core potential are not adequate for describing molecular tricyanides of group IIIa elements. This situation is probably characteristic for molecular systems with a cyano group in the molecule. Translated from Zhumal Struktumoi Khimii, Vol. 41, No. 1, pp. 42-48, January-February, 2000.     

Determination of flavonoids and stilbenes in red wine and related biological products by HPLC and HPLC-ESI-MS-MS

To investigate probable health benefits of flavonoids and stilbenes in red wine a new reversed-phase (RP) high-performance liquid-chromatographic (HPLC) method with enhanced separation efficiency and improved selectivity, sensitivity, and speed has been established for determination of the flavonoids quercetin, myricetin and kaempferol and the stilbenes cis- and trans-resveratrol, in a single run . UV-absorbance, fluorescence (FLD), and mass-spectrometric (MS) detection were also evaluated. UV-absorbance detection at 320 nm for stilbenes and 377 nm for flavonoids enables their determination up to the nanogram range with a linearity of R2>0.9999 (linear range 50 ng mL(-1)-50 microg mL(-1)). Calculated values of average recoveries were between 95 and 105% for all analytes. For resveratrol, fluorescence detection was highly selective and twice as sensitive as UV detection, and linearity was satisfactory (R2>0.9996; linear range see UV detection). For the detection of the hydrophilic glycosidic compounds piceid and rutin, which are coeluted with other hydrophilic ingredients, the validated RP HPLC system was coupled to a quadrupole ion-trap mass-spectrometer (MS) via an electrospray interface (ESI) with 25% ammonia solution as sheath liquid. MS detection was, highly linear (R2>0.9878; linear range 50 ng mL(-1)-50 microg mL(-1)) for all investigated analytes and the limits of detection were in the low nanogram range. Compared with UV detection MS detection resulted in a 200% increase in signal intensity for myricetin and 400% increases for quercetin and kaempferol, but equal signal intensity for resveratrol. Calculated values of average recoveries were 102% for myricetin and 79% for piceid. Collision induced dissociation (CID) was also used to obtain characteristic fragmentation fingerprints to facilitate qualitative and quantitative analysis even in complex matrices. Finally, this hyphenated HPLC-ESI-MS method was highly suitable and an essential improvement compared with UV- and fluorescence detection.     

Structural and electronic properties of polyacetylene and polyyne from hybrid and Coulomb-attenuated density functionals

The bond length alternation (BLA), the highest-occupied-lowest-unoccupied (HO-LU) orbital energy gap, and the corresponding excitation energy are determined for trans-polyacetylene (PA) and polyyne (PY) using density functional theory. Results from the Coulomb-attenuated CAM-B3LYP functional are compared with those from the conventional BHHLYP and B3LYP hybrid functionals. BLA values and HO-LU gaps are determined using both finite oligomer and infinite chain calculations, subject to periodic boundary conditions. TDDFT excitation energies are determined for the oligomers. The oligomer excitation energies and HO-LU gaps are then used, in conjunction with the infinite chain HO-LU gap, to estimate the infinite chain excitation energy. Overall, BHHLYP and CAM-B3LYP give BLA values and excitation energies that are larger and more accurate than those obtained using B3LYP. The results highlight the degree to which excitation energies can be approximated using the HO-LU gaps-at the infinite limit, this approximation works well for B3LYP, but not for the other functionals, where the HO-LU gap is significantly larger. The study provides further evidence for the high-quality theoretical predictions that can be obtained from the CAM-B3LYP functional.     

Structures and Spectroscopic Properties of NaAs4 and Its Anions and Cations

The equilibrium geometries, vibrational frequencies, atomization energies, adiabatic electron separations, adiabatic detachment energies （ADE）, and adiabatic ionization potentials of the low-lying electronic states for the NaAs4 clusters and its ions were investigated employing the DFT method, and then compared with the photoelectron spectra. According to the computed results, reasonable assignments for the photoelectron spectra of NaAs4^- were suggested.