Theoretical performance of novel multipliers at millimeter and submillimeter wavelengths

A theoretical comparison of various low and high order multipliers for 200 GHz and 1 THz has been carried out. Novel diodes including single barrier varactors, barrier-intrinsic-n⁺ diodes and high electron mobility varactors are shown to have excellent theoretical performance, comparable or better than the conventional Schottky varactors for single and double diode frequency multipliers at millimeter and submillimeter wavelengths, whereas quantum well diodes, since they suffer from high resistive losses, are shown to be less attractive. In comparison to the conventional Schottky varactor, these new diodes have some potential advantages in their characteristics such as nonlinearity or a special symmetry. For future optimization some general comments on these advantages as well as other factors affecting multiplication is given.     

An open-styled dielectric-lined azimuthally periodic circular waveguide for a millimeter wave traveling-wave tube

An open-styled dielectric-lined azimuthally periodic circular waveguide (ODLAP-CW) for a millimeter-wave traveling-wave tube (TWT) is proposed, which is a modified form of a dielectric-lined azimuthally periodic circular waveguide (DLAP-CW). The slow-wave characteristics of the open-styled DLAP-CW are studied by using the spatial harmonics method, which includes normalized phase velocity and interaction impedance. The complicated dispersion equations are numerically solved with MATLAB and the results are in good agreement with the simulation results obtained from HFSS. The influence of structural parameters on the RF properties is investigated based on our theory. The numerical results show that the optimal thickness of the metal rod can increase the interaction impedance, with the dielectric constant held fixed. Finally, the slow-wave characteristics and transmission properties of an open-styled structure are compared with those of the DLAP-CW. The results validate that the mode competition is eliminated in the improved structure with only a slight influence on the dispersion characteristics, which may significantly improve the stability of an open-styled DLAP-CW-based TWT, and the interaction efficiency is also improved.     

A New Theoretical Modeling of Surface Resistance in Normal Metals at Terahertz Frequencies

A number of researchers have reported discrepancies between surface resistance measurements and classical theoretical predictions for simple mm-wave and sub-mm-wave structures. We have developed a rigorous phenomenological model for analyzing surface resistance of normal metals. The model is based on quantum mechanical analysis for spatial dispersion within the metal. We have used the model to predict the surface resistance in normal metals at terahertz frequencies. Our analysis shows that the conductivity is not only frequency but also wave vector dependent. Moreover, we have compared the results of this model with the results of the classical skin-effect model and classical relaxation- effect model. We demonstrate that our model has good quantitative agreement with the published experimental data for the room temperature surface resistance of normal metals at terahertz frequencies range from the literature.     

Peak effect in surface resistance at microwave frequencies in Dy-123 thin films

A pronounced peak in the microwave (at frequency 9.55 GHz) surface resistance, R _s vs. T plot (where T is the temperature) has been observed in epitaxial DyBa₂Cu₃O_7−y superconducting thin films in magnetic fields (parallel to c-axis) in the range 2 to 8 kOe, and temperatures close to the superconducting transition temperature T _c(H). Our data suggest that the nature of peaks observed in the two films is different, thereby indicating different defect structures in the films.     

An improved phase retrieval algorithm for optical aspheric surface measurement

In order to overcome the measurement and calculation difficulty for aspheric surface with phase retrieval technology, an improved phase retrieval algorithm was proposed. Due to significant departure from sphere surface, reflected light from different part of the aspheric surface under test will overlap in some areas in the collected images by CCD with general phase retrieval measurement setup, which will lead to the failure to recover the surface phase. The proposed algorithm will only use those areas without light overlapping in each image in the iteration process and employ several defocused images to recover the whole surface. This algorithm can improve the measurement range for aspheric surface with phase retrieval technology. The experimental system was established and a 180 mm diameter, f/1.6 parabolic mirror and a 180 mm effective diameter, f/1.33 hyperboloid mirror were tested by the proposed method. The experimental results show that the retrieved surface errors are in good consistent with that obtained by interferometer, which confirms the validity of the proposed algorithm.     

标定光学劈尖厚度的波长数目研究

菲佐(Fizeau)激光波长计中光学劈尖厚度的标定是准确测量激光波长的先决条件。本文详细研究了进行光学劈尖厚度标定所需要的标定波长数目,分析结果表明:标定波长数目主要与标定波长的选择方式及光学劈尖厚度的误差范围有关。     

用惠更斯作图法讨论单轴晶体中双波长双负折射现象

近年的研究表明,在右手性的各向异性材料(如普通晶体)中一定条件下也会形成负折射,用惠更斯作图法可以清楚地说明普通单轴晶体中出现的这种情况.本文用惠更斯作图法说明在适当条件下,一束含有两种波长的光入射到单轴晶体中会出现双正折射、一正一负折射、双负折射等物理现象.以钒酸钇晶体为例,计算了发生负折射现象的临界入射角.本文的工...     

A generalization of the standard formula for the electrical resistivity of normal rare-earth metals

A unified approach to superconductivity is presented using natural extensions of weak coupling BCS theory. Multiphonon-multiband interactions cause a multigap opening atT _c , with cooperative pairing in all bands incorporated via interband interactions. Strong increases inT _c are found due to interband-induced gap coupling. Model calculations for the experimentally observed gap distribution are presented.     

金属和Kerr非线性介质界面上表面等离子体激元的色散关系

从麦克斯韦方程组出发,结合边界条件,分别得到TM波和TE波在金属和Kerr非线性介质界面上表面等离子体激元的色散关系.由于非线性的存在,TM波的色散关系变得复杂,与光强、非线性系数有关.和线性情况一样,此界面不存在TE波.     

fcc金属表面能的各向异性分析及表面偏析的预测

本文将元素变量(φ^*和n_WS)和MAEAM相结合,从原子尺度上对10种fcc金属Cu,Ag,Au,Ni,Pd,Pt,Rh,Al,Ir和Pb的38个不同晶面的表面能进行模拟计算及各向异性分析. 结果表明,fcc金属的密排面(111)的表面能最小,则该晶粒取向优先生长,与实验结果和第一原理的LMTO-ASA计算结果一致;各个晶面的表面能均随着其他晶面与(111)晶面的夹角cosθ_(hkl)的增长而呈线性 关键词： FCC金属 MAEAM 表面能 表面偏析     

Fermi surface of the noble metals

We report calculations of extremal areas of four Fermi surface (FS) orbits of the noble metals using the linear muffin tin orbital method in the atomic sphere approximation. Our calculations indicate that thel = 3 potential parameters and increase in the number of k-points in the Brillouin zone (BZ) summation from 240 to 916 have no significant effect on the FS. All calculations were performed self-consistently including up tol = 2 potential parameters and with 240 k points in the BZ summation. Calculations were performed with the exchange, correlation potentials (XCP) of Barth-Hedin, Barth-Hedin modified by Janak, SlaterX _α, and the Vosko-Wilk-Nussair. Results compared with other theoretical calculations indicate that none of the above XC potentials give an accurate representation of the FS for all the noble metals. We feel that the inclusion of the non-locality of XCP may give a better account of the FS geometry.     

An improved design for quasi-optical mode conversion of whispering gallery mode gyrotron radiation

Results are reported of a theoretical and experimental investigation of a quasi-optical mode converter for the transformation of whispering gallery mode gyrotron output into a linearly polarized Gaussian like beam. The mode converter consists of a helically cut waveguide launcher, similar to that originally proposed by Vlasovet al, followed by a focusing mirror. Theoretical results using aperture field methods indicate that the length of the waveguide launcher is of critical importance in providing a confined radiation pattern. Experimental results on the radiation pattern were obtained for several launcher lengths using a 0.6 MW, 149 GHz pulsed gyrotron operating in the TE_16,2 mode. Radiation pattern results for the optimum launcher length agree well with theoretical calculations using the Stratton-Chu aperture radiation theory for unperturbed waveguide modes. A mirror focusing in the azimuthal direction was designed by a geometrical optics approach to focus the radiation coming from the launcher. Good focusing with 91.4% efficiency (power in the focused beam divided by gyrotron power) was found experimentally using the combined launcher and mirror with the pulsed gyrotron. These results indicate that quasi-optical antennas are useful for transforming high order, high frequency gyrotron modes into directed beams in free space.     

The formula for computing the resonant wavelengths of composite microstrip antenna

The fundamental model resonant wavelength of a composite microstrip antenna is analyzed with Rayleigh-Rits method, the numberial examples are compared with experimental results, the measured data verify the theoretical values.     

An electron fluid model for the lattice dynamics of metals

An electron fluid model is proposed for the lattice dynamics of metals which satisfies the requirement of translational invariance and the lattice is in equilibrium without recourse to external forces. The model is applied to calculate the phonon dispersion of sodium in the symmetry directions.     

Effect of swift heavy ion irradiation on surface resistance of DyBa2Cu3O7-δ thin films at microwave frequencies

We report the observation of a propounced peak in surface resistance at microwave frequencies of 4.88 GHz and 9.55 GHz and its disappearance after irradiation with swift ions in laser ablated DyBa₂Cu₃O_7-δ (DBCO) thin films. The measurements were carried out in zero field as well as in the presence of magnetic fields (up to 0.8 T). The films were irradiated using 90 MeV oxygen ions at Nuclear Science Centre, New Delhi at a fluence of 3×10¹³ ions/cm². Introduction of point defects and extended defects after irradiation suppresses the peak at 9.55 GHz whereas no suppression is observed at 4.88 GHz. These results and the vortex dynamics in the films at microwave frequencies before and after irradiation are discussed.     

Measurement of the surface resistance of single-crystal copper in the millimeter-wave region at room temperature

Measurements of the surface resistance of single-crystal copper at millimeter wavelengths (35 GHz) indicate the existance of an anomaly of the skin effect at room temperature. The surfaces were prepared in stress-free processes, annealed, and manipulated in purified hydrogen and argon.     

基于超材料与电阻型频率选择表面的薄型宽频带吸波体的设计

设计了三种类型吸波体, 分别为基于正方形金属贴片(square metal patch, SMP) 结构超材料吸波体、 电阻型频率选择表面(Resistance Frequency Selective Surface, RFSS) 吸波体和SMP与RFSS的复合结构吸波体. 采用FDTD算法分别对这三种类型吸波体的电磁波吸收特性进行数值模拟分析. 模拟得到的结果表明: 在整个2-30 GHz频率范围内, SMP吸波体, 通过几何参数的设计可以实现多频窄带强吸收; RFSS吸波体, 通过方块电阻的设计可以实现高频宽带强吸收, 但强吸收的带宽有限; SMP与RFSS的复合结构吸波体, 在3-25 GHz之间吸收率大于90%以上, 且宽频范围内与自由空间具有较好的阻抗匹配特性.     

Preparation of porous super-hydrophobic and super-oleophilic polyvinyl chloride surface with corrosion resistance property

Porous super-hydrophobic polyvinyl chloride (PVC) surfaces were obtained via a facile solvent/non-solvent coating process without introducing compounds with low surface energy. The microstructure, wetting behavior, and corrosion resistance of resultant super-hydrophobic PVC coatings were investigated in relation to the effects of dosage of glacial acetic acid and the temperature of drying the mixed PVC solution spread over glass slide substrate. As-prepared PVC coatings had porous microstructure, and the one obtained at a glacial acetic acid to tetrahydrofuran volume ratio of 2.5:10.0 and under a drying temperature of 17 °C had a water contact angle of 150 ± 1.5°, showing super-hydrophobicity. In the meantime, it possessed very small contact angles for liquid paraffin and diiodomethane and good corrosion resistance against acid and alkali corrosive mediums, showing promising applications in self-cleaning, waterproof for outer wall of building, seawater resistant coating, and efficient separation of oil and water.