O2在MgO(001)完整和缺陷表面上的吸附

在密度泛函理论的框架下， 采用嵌入点电荷簇模型研究了O2在MgO(001)完整和缺陷表面上的吸附.用电荷自洽的方法确定了点电荷的值.计算结果表明， O2倾向吸附在低配位的角Mg2＋端.并且发现， 当O2为平躺吸附时，键长有较大的拉伸，将有利于O2的解离.同时，分别计算了使用裸簇和嵌入表观±2.0 e点电荷簇模型时的吸附能，并与采用电荷自洽方法的计算值进行了比较.结果表明，电荷自洽方法更能有效反映簇周围的环境，得到的计算结果能够较好地与实验值吻合.最后，分别计算了不同吸附情况下O2的振动频率.     

O2在具有氧和镁缺陷MgO(001)表面的吸附

在密度泛函理论的框架下，采用嵌入点电荷簇模型研究了O2在具有氧缺陷和镁缺陷MgO(001)表面上的吸附.用电荷自洽的方法确定了点电荷的值.计算结果表明，O2倾向吸附在具有氧缺陷的MgO(001)表面上.通过和我们近期研究过的O2在低配位的边、角上吸附结果相比较，发现具有氧缺陷的MgO(001)表面更加有利于O2的吸附和解离. Mülliken电荷分析表明，电荷由底物向吸附的O2反键轨道上转移是导致O2键强削弱的主要原因.势能曲线表明，O2在具有氧缺陷的MgO(001)表面上发生解离所需要克服的能垒比在角阳离子端发生解离所需克服的能垒有大幅度降低.     

簇模型选取的配位数原则——CO/ZnO吸附体系的ab initio研究

提出并以ZnO为例初步考察了用于金属氧化物的簇模型选取的配位数原则,即尽可能选取边界悬空键总数最少的簇模型,使簇模型"边界效应"尽可能低.在此基础上研究了CO在一系列按配位数原则选取的(ZnO)n表面簇模型上的吸附行为.结果表明,配位数原则有效地缩小了簇模型的选取范围;依配位数原则确立的ZnO表面簇模型,能够对CO/ZnO吸附体系给出合理的定性解释.计算还表明,考虑相关效应有助于进一步改善计算结果.     

CO在M55（M=Cu,Ag,Au）团簇上吸附的密度泛函研究

在全电子相对论BVP86/DNP水平下对CO在Au55,Ag55和Cu55团簇上的吸附进行了比较研究,并考察了电荷对吸附的影响.计算结果表明,CO在Au55团簇上吸附能最大,其次为Cu55团簇,最弱的为Ag55团簇.团簇电荷对C—O键活化和CO与团簇表面原子成键影响较小.金团簇的电荷对吸附能影响较大,而银和铜团簇的电荷对吸附能影响较小.CO吸附到团簇上导致团簇上电子向CO转移.C—O键活化强度与吸附位置密切相关,其中孔位吸附导致C—O键活化程度最大,最弱的为顶位吸附.CO在金团簇上吸附具有较好选择性,而在银和铜团簇上吸附无选择性.     

CO在δ-Pu(111)面吸附行为的周期性密度泛函理论研究

利用量子化学中的密度泛函理论结合周期模型方法研究了CO分子在δ-Pu(111)面的吸附行为.通过对不同吸附位置的吸附能和平衡几何结构比较发现,CO分子在δ-Pu(111)面的吸附C端吸附比O端吸附更有利,属于较强的化学作用,最稳定的吸附方式为心式垂直吸附,桥式次之,顶式最不稳定.心式垂直吸附的吸附能为-1.236 eV,C原子吸附位距离Pu表面0.212 2 nm,C-O键长0.120 8 nm.CO与Pu配位数目是决定化学吸附的主要因素,配位的Pu原子数目越多,化学成键越稳定.Mulliken电荷分析表明CO和Pu表面的作用主要发生在第一层,另外两层几乎没有影响.     

纳米金催化一氧化碳氧化反应的理论研究

近年来,纳米金催化剂独特的催化性质,特别是其优异的低温催化氧化活性,引起了人们极大的研究热情.除低温选择氧化外,在精细化学品合成、大气污染物消除、氢能的转换和利用等领域也开发出了一系列有广泛应用前景的金催化反应.此外,体相金的化学惰性和纳米金的超高活性之间差异的“鸿沟”也引起了理论工作者浓厚兴趣,试图从原理上理解体相金和纳米金活性差异的根源. CO催化氧化是最具有代表性的研究金催化活性的化学反应,本文主要综述了近十多年来金催化 CO氧化反应理论计算方面的研究工作.一般认为, CO在纳米金表面的吸附是 CO氧化反应的初始步骤.密度泛函理论研究表明, CO在金表面的吸附强度主要与被吸附金原子的配位数有关：金配位数越低, CO的吸附能越强,部分研究结果表明两者之间存在近似的线性关系.我们研究发现, CO吸附强度也与被吸附金周围配位金原子的相对位置有关,其中位于正下方的配位金原子加强 CO吸附,而位于侧位的配位金原子则弱化 CO吸附,这显然削弱了 CO吸附与金配位数线性关系的可靠性.理论研究表明,在纯金表
　　面上 O2吸附强度一般很弱,只有在一些特殊结构的金团簇上才有较强的吸附,但在 Au/TiO2界面及 CeO2表面上 O2吸附较强.金表面原子氧的吸附和金的表面结构有关.我们发现,原子氧倾向于在金的表面形成一种线性的 O–Au–O结构以增加其稳定性.当金表面的氧覆盖度增大时,会形成一种金氧化物薄膜结构,其结构依赖于氧的化学势和金的表面结构.纳米金催化 CO氧化反应机理可能因体系、载体等的差异而不同.大部分理论计算结果表明,在纯金表面上 O2很难直接解离形成原子氧,因此反应机理可能是吸附的 CO先与 O2反应形成了一种 CO–O2中间体,然后解离形成 CO2.在 Au/TiO2和 Au/CeO2催化剂上 CO催化氧化机理争议很大,均有计算结果支持 LH机理和 M–vK机理.另外,根据实验上观察到了负载型纳米金能直接活化分子氧的结果,理论上也提出了分子氧先解离为原子氧再与 CO反应的氧解离机理.针对如何解离分子氧问题,人们分别提出了低配位金模型、正方形金结构模型、Ti5c模型及 Au/Ti5c模型等.我们也提出了一种独特的双直线 O–Au–O模型来理解 Au/TiO2或 Au/CeO2界面解离活化分子氧.理论计算结果表明,低配位的金,金和载体之间的电荷转移,以及金所表现出的强相对论效应对于纳米金的活性影响很大.需要特别指出的是,金的强相对论效应有助于理解金表面的 CO吸附与金配位的关系、金表面原子氧的吸附特性、金氧化物薄膜的结构和分子氧的活化等过程.我们认为,金的强相对论作用导致了体相金的化学惰性以及纳米金的活性,因此相对论效应的深入研究将有助于理解金催化 CO氧化反应机理,从而有助于深层次理解纳米金催化活性来源.     

纳米金催化一氧化碳氧化反应的理论研究（英文）

近年来,纳米金催化剂独特的催化性质,特别是其优异的低温催化氧化活性,引起了人们极大的研究热情.除低温选择氧化外,在精细化学品合成、大气污染物消除、氢能的转换和利用等领域也开发出了一系列有广泛应用前景的金催化反应.此外,体相金的化学惰性和纳米金的超高活性之间差异的"鸿沟"也引起了理论工作者浓厚兴趣,试图从原理上理解体相金和纳米金活性差异的根源.CO催化氧化是最具有代表性的研究金催化活性的化学反应,本文主要综述了近十多年来金催化CO氧化反应理论计算方面的研究工作.一般认为,CO在纳米金表面的吸附是CO氧化反应的初始步骤.密度泛函理论研究表明,CO在金表面的吸附强度主要与被吸附金原子的配位数有关:金配位数越低,CO的吸附能越强,部分研究结果表明两者之间存在近似的线性关系.我们研究发现,CO吸附强度也与被吸附金周围配位金原子的相对位置有关,其中位于正下方的配位金原子加强CO吸附,而位于侧位的配位金原子则弱化CO吸附,这显然削弱了CO吸附与金配位数线性关系的可靠性.理论研究表明,在纯金表面上O_2吸附强度一般很弱,只有在一些特殊结构的金团簇上才有较强的吸附,但在Au/Ti O_2界面及CeO_2表面上O_2吸附较强.金表面原子氧的吸附和金的表面结构有关.我们发现,原子氧倾向于在金的表面形成一种线性的O–Au–O结构以增加其稳定性.当金表面的氧覆盖度增大时,会形成一种金氧化物薄膜结构,其结构依赖于氧的化学势和金的表面结构.纳米金催化CO氧化反应机理可能因体系、载体等的差异而不同.大部分理论计算结果表明,在纯金表面上O_2很难直接解离形成原子氧,因此反应机理可能是吸附的CO先与O_2反应形成了一种CO–O_2中间体,然后解离形成CO_2.在Au/TiO_2和Au/Ce O_2催化剂上CO催化氧化机理争议很大,均有计算结果支持LH机理和M–v K机理.另外,根据实验上观察到了负载型纳米金能直接活化分子氧的结果,理论上也提出了分子氧先解离为原子氧再与CO反应的氧解离机理.针对如何解离分子氧问题,人们分别提出了低配位金模型、正方形金结构模型、Ti5c模型及Au/Ti5c模型等.我们也提出了一种独特的双直线O–Au–O模型来理解Au/TiO_2或Au/CeO_2界面解离活化分子氧.理论计算结果表明,低配位的金,金和载体之间的电荷转移,以及金所表现出的强相对论效应对于纳米金的活性影响很大.需要特别指出的是,金的强相对论效应有助于理解金表面的CO吸附与金配位的关系、金表面原子氧的吸附特性、金氧化物薄膜的结构和分子氧的活化等过程.我们认为,金的强相对论作用导致了体相金的化学惰性以及纳米金的活性,因此相对论效应的深入研究将有助于理解金催化CO氧化反应机理,从而有助于深层次理解纳米金催化活性来源.     

簇模型ZnO(100)面上吸附CO_2的密度泛函理论研究

采用电荷自洽方法, 以嵌入原子簇Zn4O4为模型, 使用量子化学的密度泛函理论, 研究了二氧化碳在六方ZnO非极化的(1010)面的可能吸附态。计算表明, CO2垂直底物表面吸附, 氧原子只能与Zn原子配位, 并且吸附能为很弱的1.8 kJ/mol;吸附质分子平行于底物表面时, 得到了5种平衡吸附构型, 其中采用CZn配位和η2O, O二齿配位时, 吸附很弱, 经BSSE校正后的吸附能在8.8~6.6 kJ/mol。 采用η2C, O方式分别与O和Zn配位时, 吸附能为31.1 kJ/mol; C原子与表面O配位时计算得到了唯一的一个化学吸附态, 吸附能为139.6 kJ/mol, 与实验结果一致。     

MgO/Al_2O_3吸附剂对CO_2动态吸附性能的研究

以γ-Al2O3为载体,采用等体积浸渍法制取MgO/Al2O3吸附剂,利用BET、XRD等表征手段对吸附剂进行表征;并通过固定床测量穿透曲线的方法研究其对CO2动态吸附性能的影响,考察了MgO负载量、吸附温度、气体流量等因素对吸附剂吸附CO2性能的影响,同时还通过多次吸脱附实验考察MgO/Al2O3吸附剂的稳定性和再生能力。结果表明,MgO负载量为10%的吸附剂,吸附温度在50℃左右,流量为45 mL/min动态吸附量最大;经数次循环后材料的结构性质和吸附性能未见明显变化,可再生性能比较优异,是一种潜在的可工业化应用的CO2吸附剂。     

CO和CH3O在Cu2O(111)表面吸附特性及共吸附的理论研究

基于密度泛函理论, 采用广义梯度近似方法结合周期平板模型, 对Cu₂O(111)非极性表面上CO和CH₃O的吸附和共吸附进行了系统的研究. 计算了CO以4种吸附模式和CH₃O以O端在Cu₂O(111)表面上的吸附, 通过对不同吸附位置的吸附能、几何构型参数和Mulliken电荷的计算和比较发现, Cu₂O(111)表面上配位未饱和铜离子(Cu_CUS)为CO的活性吸附位; 配位饱和铜离子(Cu_CSA)为CH₃O的活性吸附位. CO和CH₃O吸附于Cu₂O(111)表面后, 表面弛豫现象明显改善. CO和CH₃O与Cu₂O(111)表面能够形成共吸附体系, CO和CH₃O之间的相互作用力达到75.89 kJ/mol, 为典型的化学作用, 有助于促进CO和CH₃O反应形成表面物种CH₃OCO, 计算结果与实验事实一致.     

Communication: CO oxidation by silver and gold cluster cations: identification of different active oxygen species

The oxidation of carbon monoxide with nitrous oxide on mass-selected Au(3)(+) and Ag(3)(+) clusters has been investigated under multicollision conditions in an octopole ion trap experiment. The comparative study reveals that for both gold and silver cations carbon dioxide is formed on the clusters. However, whereas in the case of Au(3)(+) the cluster itself acts as reactive species that facilitates the formation of CO(2) from N(2)O and CO, for silver the oxidized clusters Ag(3)O(x)(+) (n=1-3) are identified as active in the CO oxidation reaction. Thus, in the case of the silver cluster cations N(2)O is dissociated and one oxygen atom is suggested to directly react with CO, whereas a second kind of oxygen strongly bound to silver is acting as a substrate for the reaction.     

Coadsorption of CO and O(2) on selected gold clusters: evidence for efficient room-temperature CO(2) generation

Spurred by the recent demonstrations of the size- and support-dependent reactivity of supported gold clusters, here we present results on the coadsorption of CO and O(2) on selected anionic gold clusters, Au(N)(-), in the gas phase. O(2) adsorbs in a binary (0,1) fashion as a one-electron acceptor on the Au(N)()(-) clusters, with even-N clusters showing varying reactivity toward O(2) adsorption, while odd-N clusters show no evidence of reactivity. CO shows a highly size-dependent reactivity for Au(N)(-) sizes from N = 4 to 19, but no adsorption on the gold dimer or trimer. When the gold clusters are exposed to both reactants, either simultaneously or sequentially, interesting effects have been observed. While the same rules pertaining to individual O(2) or CO adsorption continue to apply, the preadsorption of one reactant on a cluster may lead to the increased reactivity of the cluster to the other reactant. Thus, the adsorbates are not competing for bonding sites (competitive coadsorption), but, instead, aid in the adsorption of one another (cooperative coadsorption). New peaks also arise in the mass spectrum of Au(6)(-) under CO and O(2) coadsorption conditions, which can be attributed to the loss of a CO(2) molecule (or molecules). By studying the relative amount of reaction, and relating it to the reaction time, it is found that the gas-phase Au(6) anion is capable of oxidizing CO at a rate 100 times that reported for commercial or model gold catalysts.     

V@Au12-: an improved novel catalyst for CO oxidation?

The catalytic properties toward CO combustion of an encapsulated cluster, V@Au12-, have been explored by means of plane-wave pseudopotential density-functional theory calculations. Single adsorption of both O2 and CO as well as coadsorption have been considered. The adsorption energy for the O2 molecule is about 0.3-0.4 eV which limits its use to low temperatures. However, in contrast to what happens for pure gold clusters, this system shows a remarkable capacity to bind a high number of oxygen molecules. Moreover, its icosahedral cluster is able to bind 12 CO molecules, since all of the gold atoms are available.The bond between the metal cluster and the oxygen molecule mainly arises from a charge transfer from the metal toward the pi(g) antibonding O2 orbitals, while in the case of CO molecule, the classical sigma-donation pi-back-donation mechanism is observed. Finally, no coadsorption effects are found when both molecules are adsorbed, the interaction properties between the cluster and the substrates remain basically unaltered.     

TDDFT Study on the Electronic Excitations and First Hyperpolarizabilities of Mixed-metal Carbonyl Clusters W2Ir2（μ-L）（CO）8（η^5-C5H4Me）2（L = dppe/dppf）

Mixed-metal carbonyl clusters of W2Ir2（CO）10（η^5-C5H4Me）2 1 and W2Ir2（μ-L）（CO）8（η^5-C5H4Me）2 （L = dppe 2, dppf 3） have been studied by TDDFT method focusing on their electronic and nonlinear optical properties. These three clusters exhibit the first static hyperpolarizabilities of medium magnitude （βtot-10×10^-30 esu）. The origin of β is discussed by the new proposed orbital-pair decomposition scheme by Barandes et al. The result suggests that the β values of the two clusters are mainly originated from d-d electron transition within the metal skeleton, and d-p （π＊） electron transition from metals to carbonyls and phenyl. The additional coordination by the electron donor group, ferrocene, makes cluster 3 own much larger β values, and the relatively longer range charge transfer from d orbitals of ferrocene to d orbirals of Ir and W is responsible for the enhanced β values.     

Molecular orbital cluster model study of bonding and vibrations of CO adsorbed on MgO surface

The interaction of CO with the MgO(100) surface has been investigated by means of all electron cluster model calculations. The CO molecule is bound on the Mg²⁺ site of MgO with a chemisorption energy of about 0.2 eV. The binding mechanism is electrostatic in nature and arises almost entirely from the interaction of the weak electric field generated by the ionic surface and the CO charge distribution, with negligible contributions from chemical effects as the CO σ donation. When CO is bound through carbon, its vibrational frequency increases with respect to the gas-phase value. This shift, Δ, has been analyzed and decomposed into the sum of different contributions. It is found that the positive Δω does not arise entirely from the field–dipole interaction but is due, in part, to the increase in Pauli repulsion occurring when the C? O molecule vibrates in the presence of the surface “wall.” A stronger electrostatic interaction, bringing the CO adsorbate closer to the surface, increases this wall effect and results in a more pronounced positive ω shift. It is also found that the two CO orientations exhibit opposite shifts in ω_e, thus, the two orientations can be distinguished, in principle, by IR spectroscopy. The analysis of our ab initio cluster wave functions gives a very different picture than the standard view of the metal–CO bond as arising from σ donation and π back donation.     

Saturated adsorption of CO and coadsorption of CO and O2 on AuN- (N=2-7) clusters

A first-principles quantum chemistry method, based on the Kohn-Sham density-functional theory, is used to investigate the adsorption of CO and O2 on small gas-phase gold cluster anions. The saturated adsorption of carbon monoxide on gold cluster anions AuN- (N=2-7) is discussed. The adsorption ability of CO reduces with the increase of the number of CO molecules bound to gold cluster anions, resulting in saturated adsorption at a certain amount of absorbed CO molecules, which is determined by geometric and electronic properties of gold clusters cooperatively. The effect of CO preadsorption on the electronic properties of gold cluster anions depends on the cluster size and the number of adsorbed CO, and the vertical detachment energies of CO-adsorbed gold cluster anions show a few changes with respect to corresponding pure gold cluster anions. The results indicate that the impinging adsorption of CO molecules may lead to geometry structure transformation on Au3- cluster. For the coadsorption of CO and O2 on Au2-, Au3- isomers, Au4-, and Au6-, we describe the cooperative adsorption between CO and O2, and find that the O2 dissociation is difficult on gas-phase gold cluster anions even with the preadsorption of CO.     

Synthesis and characterization of sulfur-voided cubanes. Structural analogues for the MoFe(3)S(3) subunit in the nitrogenase cofactor.

A new class of Mo/Fe/S clusters with the MoFe(3)S(3) core has been synthesized in attempts to model the FeMo-cofactor in nitrogenase. These clusters are obtained in reactions of the (Cl(4)-cat)(2)Mo(2)Fe(6)S(8)(PR(3))(6) [R = Et (I), (n)Pr (II)] clusters with CO. The new clusters include those preliminarily reported: (Cl(4)-cat)MoFe(3)S(3)(PEt(3))(2)(CO)(6) (III), (Cl(4)-cat)(O)MoFe(3)S(3)(PEt(3))(3)(CO)(5) (IV), (Cl(4)-cat)(Pyr)MoFe(3)S(3)(PEt(3))(2)(CO)(6) (VI), and (Cl(4)-cat)(Pyr)MoFe(3)S(3)(P(n)Pr(3))(3)(CO)(4) (VIII). In addition the new (Cl(4)-cat)(O)MoFe(3)S(3)(P(n)Pr(3))(3)(CO)(5) cluster (IVa), the (Cl(4)-cat)(O)MoFe(3)S(3)(PEt(3))(2)(CO)(6)cluster (V), the (Cl(4)-cat)(O)MoFe(3)S(3)(P(n)Pr(3))(2)(CO)(6) cluster (Va), the (Cl(4)-cat)(Pyr)MoFe(3)S(3)(P(n)Pr(3))(2)(CO)(6) cluster (VIa), and the (Cl(4)-cat)(P(n)Pr(3))MoFe(3)S(3)(P(n)Pr(3))(2)(CO)(6) cluster (VII) also are reported. Clusters III-VIII have been structurally and spectroscopically characterized. EPR, zero-field (57)Fe-M?ssbauer spectroscopic characterizations, and magnetic susceptibility measurements have been used for a tentative assignment of the electronic and oxidation states of the MoFe(3)S(3) sulfur-voided cuboidal clusters. A structural comparison of the clusters with the MoFe(3)S(3) subunit of the FeMo-cofactor has led to the suggestion that the storage of reducing equivalents into M-M bonds, and their use in the reduction of substrates, may occur with the FeMo-cofactor, which also appears to have M-M bonding. On the basis of this argument, a possible N(2)-binding and reduction mechanism on the FeMoco-cofactor is proposed.     

Oxide- and zeolite-supported isostructural ir(c(2)h(4))(2) complexes: molecular-level observations of electronic effects of supports as ligands

Zeolite Hβ- and γ-Al(2)O(3)-supported mononuclear iridium complexes were synthesized by the reaction of Ir(C(2)H(4))(2)(acac) (acac is acetylacetonate) with each of the supports. The characterization of the surface species by extended X-ray absorption fine structure (EXAFS) and infrared (IR) spectroscopies demonstrated the removal of acac ligands during chemisorption, leading to the formation of essentially isostructural Ir(C(2)H(4))(2) complexes anchored to each support by two Ir-O(support) bonds. Atomic-resolution aberration-corrected scanning transmission electron microscopy (STEM) images confirm the spectra, showing only isolated Ir atoms on the supports with no evidence of iridium clusters. These samples, together with previously reported Ir(C(2)H(4))(2) complexes on zeolite HY, zeolite HSSZ-53, and MgO supports, constitute a family of isostructural supported iridium complexes. Treatment with CO led to the replacement of the ethylene ligands on iridium with CO ligands, and the ν(CO) frequencies of these complexes and white line intensities in the X-ray absorption spectra at the Ir L(III) edge show that the electron density on iridium increases in the following order on these supports: zeolite HY < zeolite Hβ < zeolite HSSZ-53 ? γ-Al(2)O(3) < MgO. The IR spectra of the iridium carbonyl complexes treated in flowing C(2)H(4) show that the CO ligands were replaced by C(2)H(4), with the average number of C(2)H(4) groups per Ir atom increasing as the amount of iridium was increasingly electron-deficient. In contrast to the typical supported catalysts incorporating metal clusters or particles that are highly nonuniform, the samples reported here, incorporating uniform isostructural iridium complexes, provide unprecedented opportunities for a molecular-level understanding of how supports affect the electronic properties, reactivities, and catalytic properties of supported metal species.     

Low-temperature cluster catalysis

Free and supported metal clusters reveal unique chemical and physical properties, which vary as a function of size as each cluster possesses a characteristic electron confinement. Several previous experimental results showed that the outcome of a given chemical reaction can be controlled by tuning the cluster size. However, none of the examples indicate that clusters prepared in the gas phase and then deposited on a support material are indeed catalytically active over several reaction cycles nor that their catalytic properties remain constant during such a catalytic process. In this work we report turn-over frequencies (TOF) for Pd(n) (n = 4, 8, 30) clusters using pulsed molecular beam experiments. The obtained results illustrate that the catalytic reactivity for the NO reduction by CO (CO + NO --> 1/2N(2) + CO(2)) is indeed a function of cluster size and that the measured TOF remain constant at a given temperature. More interestingly, the temperature of maximal reactivity is at least 100 K lower than observed for palladium nanoparticles or single crystals. One reason for this surprising observation is the character of the binding sites of these small clusters: N(2) forms already at relatively low temperatures (400 and 450 K) and therefore poisoning by adsorbed nitrogen adatoms is prevented. Thus, small clusters not only open the possibility of tuning a catalytic process by changing cluster size, but also of catalyzing chemical reactions at low temperatures.