Cyanide-bridged complexes based on dinuclear Cu(II)-M(II) [M = Pb and Cu] building blocks: Synthesis, crystal structures and magnetic properties

Four cyanide-bridged heterometallic complexes {[CuPb(L 1 )][Fe III (bpb)(CN) 2 ]} 2 ·(ClO 4 ) 2 ·2H 2 O·2CH 3 CN (1), {[CuPb(L 1 )] 2 [Fe II (CN) 6 ](H 2 O) 2 }·10H 2 O (2), {[Cu 2 (L 2 )][Fe III (bpb)(CN) 2 ] 2 }·2H 2 O·2CH 3 OH (3) and {[Cu 2 (L 2 )] 3 [Fe III (CN) 6 ] 2 (H 2 O) 2 }·10H 2 O (4) have been synthesized by treating K[Fe III (bpb)(CN) 2 ] [bpb 2-=1,2-bis(pyridine-2-carboxamido)benzenate] and K 3 [Fe III (CN)] 6 with dinuclear compartmental macrocyclic Schiff-base complexes [CuPb(L 1 )] (ClO 4 ) 2 or [Cu 2 (L 2 )]·(ClO 4 ) 2 , in which H 2 L 1 was derived from 2,6-diformyl-4-methyl-phenol, ethylenediamine, and diethylenetriamine in the molar ratio of 2:1:1 and H 2 L 2 from 2,6-diformyl-4-methyl-phenol and propylenediamine in the molar ratio of 1:1. Single crystal X-ray diffraction analysis reveals that compound 1 displays a cyclic hexanuclear heterotrimetallic molecular structure with alternating [FeⅢ (bpb)(CN) 2 ]- and [CuPb(L 1 )] 2+ units. Complex 2 is of a neutral dumb-bell-type pentanuclear molecular configuration consisting of one [Fe(CN)6] 4- anion sandwiched in two [CuPu(L 1 )] 2+ cations, and the pentanuclear moieties are further connected by the hydrogen bonding to give a 2D supramolecular framework. Heterobimetallic complex 3 is a tetranuclear molecule composed of a centrosymmetric [Cu 2 (L2)] 2+ segment and two terminal cyanide-containing blocks [FeⅢ (bpb)(CN)2 ]- . Octanuclear compound 4 is built from two [Fe(CN)6]3- anions sandwiched in the three [Cu 2 L 2 ] 2+ cations. Investigation of their magnetic properties reveals the overall antiferromagnetic behavior in the series of complexes except 2.     

Hydroquinone-bridged dinuclear Cu(II) complexes and single-crystalline Cu(II) coordination polymers

Cationic dinuclear Cu(II) complexes 3 and 4 have been prepared using the novel hydroquinone-based imine chelators 2,5-((i)Pr(2)NCH(2)CH(2)N[double bond, length as m-dash]CH)(2)-1,4-(OH)(2)-C(6)H(2) (1) and 2,5-(pyCH(2)CH(2)N[double bond, length as m-dash]CH)(2)-1,4-(OH)(2)-C(6)H(2) (2), respectively (py = 2-pyridyl). X-Ray quality crystals of both complexes were grown from their DMF solutions. The sterically more encumbered compound crystallizes in the form of discrete dinuclear entities with Cu(II) centres in a distorted square-planar ligand environment (one coordination site is occupied by a DMF molecule). The pyridyl derivative 4 features dinuclear hydroquinone-bridged subunits similar to 3. However, the Cu(II) ions are now six-coordinate with two DMF molecules at an axial and an equatorial position of a Jahn-Teller-distorted octahedron. Moreover, the dinuclear subunits are no longer isolated but linked with each other via bridging hydroquinone oxygen atoms which occupy the second apical position of each octahedron. The structure suggests that the magnetic properties of the resulting coordination polymer of 4 could be described by a model valid for dimerized spin chains. As a result of this analysis the antiferromagnetic coupling constants J(1)/k(B) = 9.9 K (intradimer) and J(2)/k(B) = 0.9 K (interdimer) are obtained. Both in 3 and in 4, the hydroquinone --> semiquinone transition of the central bridging unit (E degrees ' = + 0.57 V, 3; E degrees ' = + 0.51 V, 4; DMF; vs. SCE) displays features of chemical reversibility. In the case of , reduction of Cu(II) centres requires a peak potential of E(p) = - 0.42 V.     

Synthesis and characterization of mononuclear copper(II) and dinuclear cadmium(II) complexes with di-(2-picolyl)sulfide

The reaction of CuCl₂ · 2H₂O and CdCl₂ with di-(2-picolyl)sulfide (dps) leads to the formation of mononuclear copper(II) and binuclear cadmium(II) complexes, [Cu(dps)Cl₂] · H₂O (1) and [(dps)(Cl)Cd^II(μ-Cl)₂Cd^II(Cl)(dps)] (2). The copper atom in (1) is coordinated to one sulfur and two nitrogen atoms from the dps ligand and two chlorides in a distorted square-pyramidal environment. Complex (2) has two distorted octahedra sharing the basal edge that contain the bridging chloro ligands, each of which resides at a center of inversion. Cyclic voltammetric data show that (1) undergoes two reversible one-electron waves corresponding to Cu^II/Cu^III and Cu^II/Cu^I processes. However, cyclic voltammetry of (2) gives two irreversible reduced waves.     

Reinvestigation of Sr2[Cu(OH)6]

During an investigation of the SrO–CuO–P₂O₅–H₂O system, single crystals of distrontium hexahydroxidocuprate(II), Sr₂[Cu(OH)₆], were obtained by the hydrothermal method. The blue prismatic crystals of Sr₂[Cu(OH)₆] adopt the same structure type as Ba₂[Cu(OH)₆], Sr₂[Zn(OH)₆] and Ba₂[Zn(OH)₆]. The Cu atoms, located at (0, 0, ) (site symmetry ), form mutually isolated and highly elongated Cu(OH)₆ octahedra, which are interconnected to slightly distorted Sr(OH)₆ trigonal prisms, forming a layered structure. The location of H atoms from difference Fourier maps and their refinement allowed the precise determination of a three‐dimensional hydrogen‐bonding network in which all hydroxide O atoms are involved. In addition, the hydrogen‐bonding topologies in Sr₂[Cu(OH)₆] and other similar hexahydroxidometallates with the general formulae M1[M2(OH)₆], M1₂[M2(OH)₆] and M1₃[M2(OH)₆] were analysed in detail.     

A dinuclear diamagnetic copper(II) complex [Cu2(ophen)2]Cl2 with hydroxylated phen

A dinuclear diamagnetic copper(II) complex, [Cu₂(ophen)₂]Cl₂ (Hophen = 2-hydroxy-1,10-phenanthroline), has been synthesized and characterized, providing good structural evidence for the long-debated Gillard mechanism.     

Semi-vacant Wells-Dawson anions. Synthesis of tri-tungsten-vacant derivatives and crystallographic studies of [alphabetabetaalpha-(Cu(II)OH2)2(Cu(II))2(AsW15(OH2)3(OH)O52)2]12-

The tri-tungsten-vacant polyoxometalate, [alpha-AsW15(OH)4O52]13-, derived from the semi-vacant Wells-Dawson complex [alpha-AsW18(OH)4O58]7-, reacts with the late-transition metal cations, Cu(II) or Zn(II), to form sandwich-type species; the X-ray crystal structure of [alphabetabetaalpha]-(Cu(II)OH2)2(Cu(II))2(AsW15(OH2)3(OH)O52)2]12-, prepared by the acidification of [alphabetabetaalpha]-(Cu(II)OH2)2(Cu(II))2(AsW15(OH)4O52)2]18-, reveals that the missing heteroatoms are distal to the central Cu4 unit and the vertices of the vacant tetrahedron are occupied by one OH- and three OH2 groups.     

Ligand influence over the formation of dinuclear [2+2] versus trinuclear [3+3] Cu(I) Schiff base macrocyclic complexes

The preparation and characterization of three new macrocyclic ligands with pendant arms based on the [2+2] condensation of isophthalaldehyde and the corresponding triamine substituted at the central N-atom is reported. None of these new macrocyclic ligands undergo any equilibrium reaction, based on imine hydrolysis to generate [1+1] macrocyclic formation or higher oligomeric compounds, such as [3+3], [4+4], etc., at least within the time scale of days. This indicates the stability of the newly generated imine bond. In sharp contrast, the reaction of the [2+2] macrocyclic Schiff bases with Cu(I) generates the corresponding dinuclear Cu(I) complexes [Cu(2)(L(1))](2+), 1(2+); [Cu(2)(L(2))(CH(3)CN)(2)](2+), 2(2+); and [Cu(2)(L(3))(CH(3)CN)(2)](2+), 3(2+), together with their trinuclear Cu(I) homologues [Cu(3)(L(4))](3+), 4(3+); [Cu(3)(L(5))(CH(3)CN)(3)](3+), 5(3+); and [Cu(3)(L(6))(CH(3)CN)(3)](3+), 6(3+), where the [2+2] ligand has undergone an expansion to the corresponding [3+3] Schiff base that is denoted as L(4), L(5), or L(6). The conditions under which the dinuclear and trinuclear complexes are formed were analyzed in terms of solvent dependence and synthetic pathways. The new complexes are characterized in solution by NMR, UV-vis, and MS spectroscopy and in the solid state by X-ray diffraction analysis and IR spectroscopy. For the particular case of the L(2) ligand, MS spectroscopy is also used to monitor the metal assisted transformation where the dinuclear complex 2(2+) is transformed into the trinuclear complex 5(3+). The Cu(I) complexes described here, in general, react slowly (within the time scale of days) with molecular oxygen, except for the ones containing the phenolic ligands 2(2+) and 5(3+) that react a bit faster.     

Monomeric and polymeric dinuclear complexes of Co(II) or Ni(II) with calix[4]arene-tetraphosphineoxide

Monomeric and polymeric 1:2 complexes of a novel calix[4]arene-tetraphosphineoxide with Co(II) or Ni(II) nitrates were synthesized and analyzed by the X-ray method. In the monomeric complexes each metal cation is coordinated by two bidentate NO₃-ligands as well as by two proximal P=O groups at the calixarene skeleton. In the nickel metallopolymer one sort of the cations is bound by the two proximal P=O-groups but other cations link neighboring calixarene molecules through Р=О···Ni···O=P chains. The complexes possess molecular cavities or channels filled by solvent molecules. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

EXAFS study of binuclear hydroxo-bridged copper(II) complexes

Extended X-ray absorption fine structure (EXAFS) measurements have been recorded at the K-edge of copper in binuclear monohydroxo-bridged copper(II) complexes [(bpy)₂Cu–OH–Cu(bpy)₂](ClO₄)₃ (1) and [(phen)₂Cu–OH–Cu(phen)₂](C1O₄)₃ (2) and dihydroxo-bridged copper(II) complexes [Cu₂(μ–OH)₂(bipy)₂]SO₄?·?5H₂O (3) and [Cu₂(μ–OH)₂(phen)₂]SO₄?·?5H₂O (4) (where bpy and phen are 2,2′-bipyridine and 1,10-phenanthroline, respectively) using the dispersive EXAFS beamline at 2?GeV Indus-2 synchrotron source at RRCAT, Indore, India. The EXAFS data have been analyzed using the software, Athena and Artemis. Theoretical models have been generated for 1 and 3 using available crystallographic data and then fitted to their experimental EXAFS data to obtain the structural parameters, which include bond-lengths, coordination numbers, and thermal disorders. The results obtained have been found to be comparable with their crystallographic results. As the crystallographic data for 2 and 4 are not available in the literature, we have determined their structural parameters by fitting their experimental EXAFS data with the same theoretical models which were generated for their corresponding analogous complexes 1 and 3, respectively. The structural parameters thus determined have been reported. Also, on the basis of the analysis of the EXAFS data, these four complexes have been shown to be binuclear, i.e. they contain two metals. Further, the values of the chemical shifts suggest that copper is in +2 oxidation state in these complexes.     

New rhodium(II)-rhodium(III) dinuclear complexes with 2-aminopyridine bridges

Summary The syntheses of the complexes [Rh₂(ap)₄X] (ap = the heterocyclic anion of 2-aminopyridine; X = Cl or Br) are described. The complexes have been characterized on the basis of elemental analysis, i.r., e.s.r. and electronic absorption spectra, and magnetic susceptibility measurements. The 2-aminopyridine anion behaves as bridging ligand, coordinatingvia the pyridine and amine nitrogen atoms in a way analogous to that in the dinuclear rhodium(II) carboxylates.     

NaCu(II)4] cluster from alkali template assembly of two asymmetric end-on azido-bridged [Cu(II)2] units

The cluster [NaCu4L2(N3)2](ClO4) [1; H3L is 2-(2'-hydroxyphenyl)-1,3-bis[3'-aza-4'-(2'-hydroxyphenyl)prop-4'-en-1'-yl]-1,3-imidazolidine] has been synthesized and structurally characterized. Complex 1 is formed by the template assembly of two [Cu2L(N3)] neutral fragments through their weak oxophilic interactions with a central Na+ cation as observed in metallacrowns. The cluster exhibits a combination of ferro- and antiferromagnetic interactions. End-on N3- bridging of copper ions within the [Cu(II)2] units facilitates stabilization of S = 1 magnetic subunits that mutually cancel via antiferromagnetic coupling as mediated by the O...Na+...O bridges.     

Crystallochemical causes of the different thermal properties of [Cu(py)2(NCS)2] and [Cu(4-Mepy)2(NCS)2] complexes

The crystal structures and thermal behaviour of [Cu(py)₂(NCS)₂] (at 293) and [Cu(4-Mepy)₂(NCS)₂] and 180 K) complexes have been compared with their different temperature behaviour. It was found that the thermal stability of coordinated thiocyanate ligands in the course of thermal decomposition depends not only on the properties of the ligand L, but it is related to the arrangement of the thiocyanatocopper chains in the crystal structures.     

Polymers based on anionic octahedral cluster chalcocyanohydroxorhenium complexes and cations [Cu(En)2]2+

Polymer compounds [Cu(En)₂(H₂O)₂][{Cu(En)₂}Re₆S₈(CN)₄(OH)₂] · 5.5H₂O (I) and [Cu(En)₂(H₂O)₂][{Cu(En)₂}Re₆Se₈(CN)₄(OH)₂] · 5H₂O (II) are synthesized by the layering of an ammonia solution of CuCl₂ with ethylenediamine (En) on aqueous solutions of the corresponding octahedral cluster chalcocyanohydroxorhenium complexes. The compounds are characterized by IR spectroscopy and elemental and X-ray diffraction analyses.     

New Cu(II), Co(II), and Ni(II) complexes with thieno[2,3-b]pyridine and 2-methylthieno[2,3-b]pyridine as ligands: Synthesis and crystal structures

Although thienopyridines attract attention because of their biological activities, they have not been used as ligands in coordination compounds. Thieno[2,3-b]pyridine was prepared by known procedures; by reduction of 2-nitrothiophene, and reaction of the resulting 2-thienyl ammonium salt with malondialdehyde tetramethylacetal in the presence of zinc chloride. The same procedure was used for the preparation of a new derivative, 2-methylthieno[2,3-b]pyridine, starting from 2-methyl-5-nitrothiophene. The thienopyridines were used in the synthesis of coordination compounds. Chlorides, isothiocyanates, acetates, and chloroacetates of copper(II), nickel(II), or cobalt(II) were used as starting salts. The prepared complexes were characterized by elemental analysis and FT IR. Structures of the four complexes were determined by single-crystal X-ray diffraction analysis. Presented at the 1st International Conference “Applied Natural Sciences” on the occasion of the 10th anniversary of the University of Ss. Cyril and Methodius, Trnava, 7–9 November 2007.     

Anion-selective receptors based on dinuclear copper(II) and nickel(II) cage complexes of bis-salicylaldimines

The selectivity, anion uptake and exchangeability of anion-binding by metal salt extractants of the form [M₂ L ₂]⁴⁺ have been assessed by the method of anion exchange chromatography in biphasic systems. The order of sulfate-, nitrate-, and chloride-uptake into the solid copper(II) complex as of the dioxime pro-ligand N,N??-dimethyl-N,N??-hexamethylenedi(3-hydroxyiminomethyl-2-hydroxy-5-tert-butylbenzylamine (L ¹ ) is 56, 42, and 16%, respectively, consistent with the relative magnitudes of formation constants for the inclusion complexes, [A?Cu₂ L ¹ ₂] ⁿ⁺ where A = anion, found in UV?Cvis titration studies in a single phase. X-ray structural determination of the bis-benzylimine pro-ligand, N,N??-dimethyl-N,N??-hexamethylenedi-(3-benzyliminomehyl-2-hydroxy-5-tert-butylbenzylamine), nickel(II) sulfato complex [SO₄?Ni₂ L ² ₂]SO₄ reveals the nickel atoms to have a significant tetrahedral distortion, providing more favourable sulfate-alkylammonium interactions within the cage.     

Mononuclear,dinuclear and hydroxo-bridged tetranuclear complexes from reactions of Cu ions,mandelic acid and diimine ligands

The reaction of copper(II) hydroxocarbonate, mandelic acid (H₂MANO) and 2,2′-bipyridine (bpy) or 1,10-phenanthroline (phen) in water affords [Cu(bpy)(μ₂-MANO)]₂ · 8H₂O (1), [Cu(bpy)(MANO)] · 4H₂O (2) and the opened tetranuclear hydroxo-bridged copper(II) complexes of formulae [Cu₄(μ₃-OH)₂(μ₂-MANO)₂(bpy)₄](phglyo)₂ · 8H₂O (3) (phglyo = phenylglyoxylate) or [Cu₄(μ₃-OH)₂(μ₂-OH)₂(OH₂)₂(phen)₄](Bza)₂(OH)₂ · 5H₂O (4) (Bza = benzoate), respectively. The compounds have been characterized by spectroscopic techniques and studied by single-crystal X-ray diffractometry. The formation of 3 and 4 takes place in basic media through dehydrogenation or oxidative dehydrogenation followed by in situ oxidative decarboxylation of mandelic acid to phenylglyoxylate or benzoate, respectively. These results indicate that cooperative catalysis of diimine ancillary ligands and copper(II) is essential.