Electron microprobe analysis of micro amount powder samples: A case study on high purity coal

For the major, minor and trace element analysis of the inorganic compounds of a Ruhr-Saar coal different preparation techniques are investigated with X-ray fluorescence analysis, electron microprobe and classical wet chemical methods minimizing sample weight at standard preparation times and analytical accuracies. Considering accuracy as well as preparation efforts, determinations by electron microprobe on small sample amounts (<50 mg) proved to be superior to the other methods.Abbreviations AAS atomic absorbtion spectrometry - EMA electron microprobe analysis - IC ion chromatography - ISE ion sensitive electrode - PHOT photometry - WCA wet chemical analysis - XRF X-ray fluorescence analysis - LTA low temperature plasma ashing - HTA high temperature ashing - l.o.i. loss on ignition     

Preparation of conducting electrodes from biological samples for multi-element trace analysis by spark-source mass spectrometry or emission spectrometry

Four decomposition procedures frequently used for biological material (dry ashing, open wet digestion, wet digestion in a teflon bomb and low-temperature ashing) are optimized for the conversion of biological samples to conducting electrodes suitable for multi-element trace determinations by spark-source mass spectrometry or emission spectrometry. The optimized procedures are evaluated with respect to contamination, retention and preconcentration of the trace elements, homogeneity of the electrodes and precision of the final results. Both dry-ashing methods are prone to losses by volatilization; simple dry ashing suffers from contamination problems during electrode preparation. Wet digestion gives better precision; digestion with nitric/sulfuric acids in an open flask is the method of choice for most elements being simpler and giving lower blanks than the bomb method.     

石墨炉原子吸收光谱法测定痕量镉的基体改进效应研究及其应用

研究了磷酸氢二钾对石墨炉原子吸收光谱法测定痕量镉的基体改进效应,试验表明,在磷酸盐存在下,镉的灰化温度能显著提高,钾对镉有一定的增感效应。以此建立了用磷酸氢二钾作基体改进剂,直接测定岩石、土壤和水系沉积物中痕量镉的方法。     

Dispersive liquid phase microextraction (DLPME) combined with graphite furnace atomic absorption spectrometry (GFAAS) for determination of trace Co and Ni in environmental water and rice samples

A new method of dispersive liquid phase microextraction (DLPME) combined with graphite furnace atomic absorption spectrometry (GFAAS) was proposed for the determination of trace Co and Ni using 1-(2-pyridylazo) 2-naphthol (PAN) as chelating reagent. Several factors influencing the microextraction efficiency of Co and Ni and their subsequent determinations, such as pH, extraction and disperser solvent type and their volume, concentration of the chelating agent, extraction time and ashing temperature and atomization temperature were studied, and the optimized experimental conditions were established. After extraction, the enrichment factors were 101 and 200 for Co and Ni, respectively. The detection limits of the method were 21 and 33 pg/mL for Co and Ni, and the relative standard deviations (R.S.Ds.) for five determinations of 0.5 ng/mL Co and Ni were 7.5% and 8.2%, respectively. The results for the determination of Co and Ni in East Lake water, Yangtse River water, Dongbei rice and spiked samples have demonstrated the accuracy, recovery and applicability of the proposed method. To validate the proposed method, two certified reference materials of Environment Water (GSBZ50009-88) and NIES No.10-b rice flour were analyzed, and the determined values were in good agreement with the certified values.     

Comparison of dissolution procedures for the determination of cadmium and lead in plastics

Summary A microwave digestion procedure and an oxygen flask combustion procedure were developed for the determination of cadmium and lead in plastic materials. A comparison with conventional wet ashing shows acceptable agreement. Different types of plastics such as polyvinylchloride, polypropylene, polyethylene, polystyrene, polyamide, and polyethyleneterephthalate were investigated. The precision of microwave digestion was determined within a series and from day to day. The results obtained by flame atomic absorption spectrometry were verified by measurement with inverse voltammetry. Overall, microwave digestion as well as oxygen flask combustion are time saving and cost-effective dissolution procedures to supervise the legal cadmium limit in plastics.Abbreviations FAAS Flame atomic absorption spectrometry - GFAAS Graphite furnace atomic absorption spectometry - ICPMS Inductively coupled plasma mass spectrometry - PVC Polyvinylchloride - PP Polypropylene - PE Polyethylene - PS Polystyrene - PET Polyethyleneterephthalate - PA Polyamide 6.6 - PTFE-TFM Polytetrafluoroethylene-tetrafluoromethoxylate - HMDE Hanging mercury drop electrode - MS Mass spectrometry - OFC Oxygen flask combustion - MWD Microwave digestion - CWA Conventional wet ashing - DL Detection limit - QL Quantification limit     

Preconcentration and determination of cadmium by GFAAS after solid-phase extraction with synthetic zeolite.

The solid-phase extraction (SPE) method for the preconcentration of trace amounts of cadmium using synthetic zeolite A-4 and its determination by graphite furnace atomic absorption spectrometry (GFAAS) was investigated. The preconcentration conditions, such as the optimum pH range of the sample solution for the adsorption of cadmium and the kind of acid solution for dissolving the cadmium-adsorbed synthetic zeolite A-4, as well as the measurement conditions for the determination of cadmium by GFAAS, e.g., the ashing and atomizing temperature, were investigated. Quantitative recovery of cadmium onto zeolite A-4 from the sample solution over the pH range 2.0 - 9.0 was achieved by the batch method. After the solid-phase (cadmium-adsorbed zeolite A-4) was separated from the sample solution by a membrane filter, it was dissolved in 2.0 cm(3) of 2.0 mol dm(-3) nitric acid. An aliquot of the resulting solution was injected into the graphite furnace. In GFAAS measurements an alternate gas (Ar, 90%; O(2), 10%) was used as a sheath gas, and the ashing temperature and atomizing temperature were 400 degrees C and 1600 degrees C, respectively. The detection limit (3 sigma) for cadmium was 0.002 microg dm(-3). The relative standard deviation at 0.010 microg dm(-3) was 3.5 - 4.5% (n = 5). The proposed method has been successfully applied to the analysis of trace cadmium in environmental water samples.     

Determination of tin in environmental samples by graphite furnace atomic absorption and inductively coupled plasma-mass spectrometry

Summary Methods for the determination of total Sn in environmental samples (waters, animal tissue, plant material, sediments and coal fly ash), by graphite furnace atomic absorption spectrometry (GFAAS) and inductively coupled plasma mass spectrometry (ICP-MS) have been developed and evaluated.Noble metals (Ag, Au, Pd, Pt, Rh) under reducing conditions were studied as matrix modifiers for the determination of Sn by GFAAS. The maximum ashing temperature (1400°C), highest sensitivity and the best absolute detection limit (4 pg) were achieved when Pd was used in the presence of hydroxylamine hydrochloride. The achievable sensitivity depended strongly on the chemical composition of the matrix.Both GFAAS and ICP-MS appeared to be equally sensitive techniques for the direct determination of Sn in waters, though ICP-MS was a more convenient and sensitive technique for the determination of Sn in digested biological and geological materials.

---

Bestimmung von Zinn in Umweltproben durch Graphitrohr-AAS und ICP-MS

     

平台石墨炉原子吸收法直接测定全血中痕量锗

研究了基体改进及其用量，锗的灰化和原子化温度以及６种共存离子的干扰，采用锶和硝酸铵混合液作基体改进剂，锗的灵敏度高，提高了方法的选择性，样品不需消化与分离，可采用平台石墨炉法直接测定血样中的痕量锗。     

A study of sample mineralization methods for arsenic analysis of blood and urine by hydride generation and graphite furnace atomic absorption spectrometry

Mineralization procedures for blood and urine suitable for the determination of arsenic by Hydride Generation Atomic Absorption Spectrometry (HGAAS) are studied on model samples, and the results are utilized in biological monitoring investigations. The objective of this work is to obtain good total As recoveries for both matrices regardless of added As species (As(III), As(V), DMA, MMA, AsB, or AsC). Prior to the HGAAS analyses, preparation procedures were controlled under optimised conditions by graphite furnace atomic absorption spectrometry (GFAAS). Two preparation procedures for urine give As recoveries close to 100% by HGAAS: a) dry ashing at 420°C with Mg(NO₃)₂ on a hot plate, and b) microwave oven decomposition with (NH₄)₂S₂O₈. For blood samples, As recoveries by HGAAS range between 95 and 108% for all species when using dry ashing after a pretreatment of samples with HNO₃ and H₂O₂ in a microwave oven. Wet digestion with (NH₄)₂S₂O₈ in a microwave oven gives recoveries very near 100% for As _inorg. and MMA. For other As species in spiked blood samples, recoveries of less than 20% As are found. Precision and detection limits obtained by both techniques are evaluated as well. For arsenic concentrations of 20 μg dm⁻³ or more in blood and urine, a chemical modifier is recommended for GFAAS analysis; it may or may not be proceeded by a mineralization step. For low As levels encountered in the unexposed population, the HGAAS technique provides reliable results only if a very complete mineralization procedure is used.     

Proposed phytic acid standard including a method for its analysis

A method is described that accurately and rapidly quantifies the free and total phosphorous content of a commercially available, purified, phytic acid preparation. This allows its use as a standard for phytic acid determinations in foods. The method involves a wet ashing step followed by phosphorous measurement with a 1-amino-2-naphthol-4-sulfonic acid-molybdate reagent in a microplate reader at 660 nm. The procedure can be performed in 3 h with as little as 50 mg sample.     

Liquid-phase microextraction combined with graphite furnace atomic absorption spectrometry: A review

An overview of the combination of liquid-phase microextraction (LPME) techniques with graphite furnace atomic absorption spectrometry (GFAAS) is reported herein. The high sensitivity of GFAAS is significantly enhanced by its association with a variety of miniaturized solvent extraction approaches. LPME-GFAAS thus represents a powerful combination for determination of metals, metalloids and organometallic compounds at (ultra)trace level. Different LPME modes used with GFAAS are briefly described, and the experimental parameters that show an impact in those microextraction processes are discussed. Special attention is paid to those parameters affecting GFAAS analysis. Main issues found when coupling LPME and GFAAS, as well as those strategies reported in the literature to solve them, are summarized. Relevant applications published on the topic so far are included.     

Determination of chromium in human serum by electro-thermal atomic absorption spectrometry

An accurate and sensitive method for serum chromium determinations by graphite-furnace atomic absorption spectrometry is described. Samples containing a small amount of magnesium nitrate as an ashing aid/matrix modifier are lyophilized and dry-ashed in silanized quartz tubes; the residue is dissolved in 0.1 M HCl. Because of the very low levels of chromium in serum, strict contamination control measures must be used throughout the procedures for collection, storage, preparation and quantitation. Standard curves are prepared by using a bovine serum pool, which also serves as a quality control measure. The uniform nature of sera obviates the need to use the method of standard additions. The detection limit of the method is about 0.03 ng ml^?1 Cr and the accuracy of the method is evaluated by comparison with stable-isotope-dilution mass spectrometry.     

Optimization of a chemical modifier in the determination of selenium by graphite furnace atomic absorption spectrometry and its application to wheat and wheat flour analysis.

A method for the determination of total selenium in wheat and wheat flour using graphite furnace atomic absorption spectrometry (GFAAS) with palladium/ascorbic acid as a chemical modifier was studied. The effects of nickel nitrate, palladium/ascorbic acid, and palladium/magnesium nitrate as chemical modifiers on the sensitivity in the determination of selenite, selenate and selenomethionine by GFAAS were compared. The palladium/ascorbic acid modifier was used for the determination of total selenium in wheat and wheat flour, because the oxidation states of the selenium ion are not important in the determination. The detection limit was estimated to be 1 microg L(-1) (calculated as 3sigma of the blank); the calibration curve was linear for the concentration range 5 - 50 microg L(-1) and the recovery range was 96.66 - 101.80%. The optimal ashing and atomizing temperatures were 1300 degrees C and 2250 degrees C, respectively. The proposed method was successfully applied to the determination of total selenium in wheat and wheat flour.     

石墨炉原子吸收法测定香根草中痕量Pb、Cd、Cu

采用石墨炉原子吸收法直接测定了香根草中重金属的含量,通过一系列实验,确定了石墨炉法测定Pb、Cd、Cu的最佳灰化温度和原子化温度,考察了精密度和回收率。结果表明,该法操作简单快捷,样品用量少,灵敏度高,稳定性好。     

Revisitation of mineralization modes for arsenic and selenium determinations in environmental samples

Mineralization procedures for arsenic and selenium analysis are usually limited to wet digestion methods owing to high volatility of these analytes. On the other hand, variable amounts of silicon in some types of samples imply elaborated mineralization procedures to liberate analytes which may be retained in an insoluble residue. Consequently, methods for such material generally include an hydrofluoric step followed by an evaporation to dryness. This type of mineralization is most easily accomplished using a dry ashing procedure. For plant analysis, a well validated and readily applicable dry ashing method is used for a long time in several laboratories but up today one could suppose that As and Se determinations cannot be performed after such a type of mineralization. Surprisingly, it has been observed that for plant samples these analytes are detected even after a calcination at 450 degrees C. The general usefulness of a dry ashing method for analysis of all other analytes (main, minor and trace elements) incitates us to also verify As and Se recoveries. Results obtained in this work indicate clearly that plants of terrestrial origin may be mineralized using dry ashing procedure without As and Se losses. This statement was confirmed by analyses of several reference terrestrial plant samples (RMs) and laboratory control samples. Another confirmation was given by the direct graphite furnace analysis of the same plant samples but in slurried form (SS-ETAAS). As a direct consequence, As and Se analysis in terrestrial plants no more necessitates a separate preparation methodology. On the other hand, significant losses of As and Se were observed for aquatic plants, e.g. algaes. For the analysis of this type of samples, a separate wet digestion procedure remains unavoidable if the determination of As and Se has to be considered. Also some preparation procedures were tested for As and Se-analysis of soil and sediment reference samples. In these cases the wet digestion with a mixture of nitric, perchloric and hydrofluoric acids seems to remain the best alternative.     

石墨炉原子吸收光谱测硼时基体改进剂的选择

研究各种基体改进剂的增感效果,和它们对灰化、原子化温度的影响。结果表明,Ca、Sr、Ca-Mg、Ca-La、Sr-Mg均可作为硼的基体改进剂,且Ca-Mg、Ca-La、Sr-Mg较之Ca、Sr性能优越。并分别以Ca、Ca-Mg、Sr-Mg作基体改进剂,直接分析饮用水中痕量硼,所得结果基本一致,相对标准偏差均在10%以内。     

Combination of classical dry ashing with stripping voltammetry in trace element analysis of biological materials: review of literature published after 1978

Critical statements have appeared recently in the literature concerning the need for classical dry ashing in trace element analysis of biological materials. In contrast, respected institutions (AOAC, Nordic Committee on Food Analysis, etc.) as well as numerous other laboratories have developed, verified, and/or successfully used classical dry ashing in practical analyses of a number of materials of biological origin. Hence, it is desirable to find out under which conditions the latter decomposition technique yields good and accurate results. Since electroanalytical techniques are among the most demanding with regard to the completeness of the biological matrix removal, we decided to critically review the literature published after 1978 in which classical dry ashing is combined with some version of electroanalytical measurement. It emerged from this review that in particular the charring step requires careful performing. When performed well, classical dry ashing leads to complete removal of the organic matrix and to accurate analytical results for a number of determined elements.     

On-line coupling of ion chromatography and atomic spectrometry and use of direct graphite furnace atomic absorption spectrometry as new tools for ultra trace determinations in refractory metals

On-line coupling of inductively coupled plasma (ICP) techniques such as ICP-AES and ICP-MS with ion chromatography (IC) offers unique features for ultra-trace analysis. An on-line preconcentration procedure based on cation exchange enables sub-ng/g analysis in complex matrices like molybdenum and tungsten. The best dissolution reagent for these matrices is hydrogen peroxide, which can be cleaned to ultra high purity with the same metal free chromatography equipment used for the preconcentration. Preconcentration is possible for elements that show cationic reactions within acidic peroxide containing solutions. In this study 28 elements detrimental for microelectronics applications are observed. A comparison of the combinations IC-ICP-AES and IC-ICP-MS with glow discharge mass spectrometry (GDMS) for the analysis of today's purest tungsten samples shows the analytical power and accuracy of the coupled devices. Graphite furnace atomic absorption spectrometry (GFAAS) as an extremely sensitive analytical technique is applied with and without the same sample pretreatment as used for the on-line coupling. Direct GFAAS measurements of alkali metals are complementary to IC-ICP techniques. The data evaluated with these wet chemical techniques are compared to the usual manufacturers characterisation technique GDMS. With respect to the low concentrations present in these high purity materials (ng/g level in the solid) the discrepancies between all methods are acceptable. The sensitivity of IC-ICP-MS is in most cases far superior to IC-ICP-AES and for some elements also to GDMS. Furthermore the specific advantages of on-line coupling such as the elimination of isobaric interferences in ICP-MS or spectral interferences in ICP-AES are shown for ICP-AES and ICP-MS determinations.     

Determination of element concentrations in biological reference materials by solid sampling and other analytical methods

Summary Using solid sampling with graphite furnace atomic absorption spectrometry (GFAAS), values for cadmium, copper, lead and zinc in six biological reference materials were obtained from up to four laboratories participating in three collaborative studies. These results are compared with those obtained with other methods used in routine analysis from laboratories of official food control. Under certain conditions solid sampling with GFAAS seems to be suitable for routine analysis as well as conventional methods.