Characterization of River Natural Organic Matter by High-Performance Size Exclusion Chromatography

The molecular weight of natural organic matter from the Yeongsan and Seomjin Rivers and the discharge from the wastewater treatment plants were analyzed for seasonal characteristics by high-performance size exclusion chromatography. The distribution of molecular weights demonstrated relationships with microbial activity and seasonal variations with temperature. Dissolved organic carbon and total organic carbon for the Seomjin River were from 1.6 to 3.1 mg L^?1; for the Yeongsan River system, these parameters were between 2.0 and 8.0 mg L^?1. There were no significant differences between upstream and downstream organic matter. The biochemical oxygen demand (0.8–2.5 mg L^?1) for the Seomjin River was less than the chemical oxygen demand (2.9–5.0 mg L^?1). Similarly, the biochemical oxygen demand (0.9–4.6 mg L^?1) for the Yeongsan River was lower than the chemical oxygen demand (3.8–10.6 mg L^?1). The molecular weight of aromatic compounds increased as the water temperature decreased in October, whereas the molecular weights of proteins decreased as the water temperature increased. These results suggest that as microbial activity increased, natural organic matter with a smaller molecular weight may be employed as an energy source by microorganisms. As a result, seasonal variation of the water temperature may influence the distribution of organic matter in the rivers based on molecular weight and microbial activity such that the smaller natural organic matter was more readily degraded by microorganisms.     

Construction and analytical application of a biosensor based on stearic acid-graphite powder modified with sweet potato tissue in organic solvents

A biosensor based on stearic acid-graphite powder modified with sweet potato (Ipomoea batatas (L.) Lam.) tissue as peroxidase source was constructed and applied in organic solvents. Several parameters were studied to evaluate the performance of this biosensor such as stearic acid-graphite powder and tissue composition, type and concentration of supporting electrolyte, organic solvents, water/organic solvent ratio (% v/v) and hydrogen peroxide concentration. After selection of the best conditions, the biosensor was applied for the determination of hydroquinone in cosmetic creams in methanol. At the peroxidase electrode hydroquinone is oxidized in the presence of hydrogen peroxide and the radical formed was reduced back electrochemically at –180 mV vs Ag/AgCl (3.0 mol L^–1 KCl). The reduction current obtained was proportional to the concentration of hydroquinone from 6.2 × 10^–5 to 1.5 × 10^–3 mol L^–1 (r = 0.9990) with a detection limit of 8.5 × 10^–6 mol L^–1. The recovery of hydroquinone from two samples ranged from 98.8 to 104.1% and an RSD lower than 1.0% for a solution containing ¶7.3 × 10^–4 mol L^–1 hydroquinone and 1.0 × 10^–3 mol L^–1 hydrogen peroxide in 0.10 mol L^–1 tetrabutylammonium bromide methanol-phosphate buffer solution (95:5% v/v) (n = 10) was obtained.     

polyMOFs: A Class of Interconvertible Polymer‐Metal‐Organic‐Framework Hybrid Materials

Preparation of porous materials from one‐dimensional polymers is challenging because the packing of polymer chains results in a dense, non‐porous arrangement. Herein, we demonstrate the remarkable adaptation of an amorphous, linear, non‐porous, flexible organic polymer into a three‐dimensional, highly porous, crystalline solid, as the organic component of a metal–organic framework (MOF). A polymer with aromatic dicarboxylic acids in the backbone functioned as a polymer ligand upon annealing with Zn^II, generating a polymer–metal–organic framework (polyMOF). These materials break the dogma that MOFs must be prepared from small, rigid ligands. Similarly, polyMOFs contradict conventional polymer chemistry by demonstrating that linear and amorphous polymers can be readily coaxed into a highly crystalline, porous, three‐dimensional structure by coordination chemistry.     

Derivatization of Humic Compounds: An Analytical Approach for Bound Organic Residues

Abstract

Bound residues of pesticides and their metabolites are defined as being nonextractable with organic solvents, but partly extractable together with the humic matrix by NaOH or other solvents suitable to extract humic compounds. Recently, an improvement in humus extraction from soils was achieved upon derivatization of the organic matter with silylating reagents at room temperature. By this method 70–90% of the organic carbon or nitrogen either from soil or from humin became soluble in organic solvents. The extracts were analyzed by means of ¹³C NMR-spectroscopy. The spectra were well resolved with signal-separation of less than 1 ppm. The extracted humic compounds were of rather low molecular weight, ranging from 300 to 4000 to 6000 d or more.

¹⁴C-labeled residues of pesticides or other xenobiotics found to be nonextractable after exhaustive organic solvent extraction became readily dissolved along with most of the humic matrix using this derivatization procedure. Between 60–80% of ¹⁴C anilazine residues or of ¹⁴C-labeled chlorinated phenols or anilines originating from both previously solvent extracted soil samples or from humin became solubilized in organic solvents.     

Metal–Organic Coordination Strategy for Obtaining Metal-Decorated Mo-Based Complexes: Multi-dimensional Structural Evolution and High-Rate Lithium-Ion Battery Applications

Multi-dimensional metal oxides have attracted great attention in diverse applications due to their intriguing performances. However, their structural design remains challenging, particularly that based on organic chelation chemistry. Although metal–organic complexes with different architectures have been reported, their structure formation mechanisms are not well understood because of the complex chelation processes. Herein, we introduce a new metal–organic coordination strategy to construct metal-decorated (Ni, Co, Mn) Mo-based complexes ranging from 2D nanopetals to 3D microflowers. The chelating process of the metal–organic complex can be tuned by a surfactant, giving rise to different structures, and then a further metal can be appended. Thus, different metal (oxide)-decorated MoO₂/C-N structures were designed, enabling an extremely high lithium storage capability of 1018 mA h g⁻¹ and rate capacities of up to 10 A g⁻¹ over 1000 cycles. Relationships between electrochemical behavior and structure have been analyzed kinetically. A high-rate lithium-ion battery has been assembled from Ni-MoO₂/C-N and an Ni-rich layered oxide as the anode and cathode, respectively. We believe that this general metal–organic coordination strategy should be applicable to other multi-functional materials with superior capabilities.     

Cationic Zr-based metal-organic framework via post-synthetic alkylation for selective adsorption and separation of anionic dyes

Adsorption and separation of toxic organic dyes are of great importance in wastewater treatment and dye recycling. In this work, cationic metal-organic framework MIL-140C–2NMe⁺ with triangular hydrophobic channels was prepared in which methyl groups were added to the pyridyl sites of the ligand [2,2'-bipyridine]-5,5'-dicarboxylic acid (H₂bpydc) via post-synthetic alkylation reaction. MIL-140C–2NMe⁺ can be used as an efficient adsorbent for the selective adsorption and separation of anionic dyes in the aqueous mixture of cationic/anionic dyes. Specifically, the adsorption capacities of MIL-140C–2NMe⁺ for anionic methyl orange can reach 310 mg/g in 10 min. With a facile doctor-blading process, we have also polymerized the MIL-140C–2NMe⁺ nanocrystals and polyvinylidene fluoride (PVDF) polymer to fabricate a flexible and self-supporting mixed matrix membrane (MMM), which can selectively capture and separate the anionic organic dyes from the binary dye mixtures.     

Evaluation of metal‐organic framework 5 as a new SPE material for the determination of polycyclic aromatic hydrocarbons in environmental waters

Metal‐organic frameworks, a new class of materials with high surface area and great porosity, have been widely applied in gas sorption. It is generally known that metal‐organic framework 5 cannot be applied in aqueous phase since it is water sensitive. However, this work reveals that the derived material of metal‐organic framework 5 is a good SPE sorbent that can be applied to aqueous phases. Metal‐organic framework 5 was prepared and used as a SPE sorbent for the determination of polycyclic aromatic hydrocarbons in environmental matrices coupling with HPLC. The water treatment induced changes in the properties were investigated in detail. Even though metal‐organic framework 5 is conversed to a second phase after water treatment, it still shows high extraction ability. Under the optimized experimental conditions, good sensitivity levels were achieved with low LODs ranging from 0.4 to 4.0 ng L^?1 and a linearity of 0.004–20 μg L^?1 (R² > 0.996) for the investigated polycyclic aromatic hydrocarbons. The method has been validated in the analysis of real water samples with recoveries in the range of 80.2–120.2% and RSDs in the range of 0.5–11.7%.     

One pot synthesis of ordered mesoporous organosilica particles bearing propyl-, octyl- and hexadecyl-chains

New hybrid organic–inorganic materials exhibiting ordered mesoporous structures have been synthesized by co-condensation of tetraethoxysilane and various alkyltrimethoxysilanes with increasing length of the hydrocarbon chain (propyl, octyl, hexadecyl), in water–ethanol solution containing ammonia, in the presence of a cationic surfactant (cetyltrimethylammonium bromide) as templating agent. The obtained hybrid materials were characterized by using several physico-chemical techniques, such as X-ray diffraction, N₂ adsorption, ²⁹Si MAS NMR, SEM and elemental analysis. It was shown that the direct synthesis procedure allows obtaining ordered hybrid mesoporous silica with various contents of organic functions, from 5 to 20 %. Moreover, increasing the chain length of the organic group, from propyl to octyl and hexadecyl leads to a change of the pore structure from hexagonal p6mm MCM-41 type architecture to cubic Ia3d MCM-48 type mesostructure.     

Comparison of enantioseparation of amino acid derivatives in aqueous and mixed aqueous-organic media by capillary zone electrophoresis

The chiral separation of dansyl-amino acids has been performed by capillary zone electrophoresis using ¶β-cyclodextrin as a chiral selector, urea as an additive and 2-propanol and methanol as organic modifiers. The enantiomeric separations of dansyl-amino acids were investigated in aqueous medium and compared with the separation in mixed aqueous-organic medium as background electrolytes. The separation conditions, (concentration of buffer, β-cyclodextrin, methanol, urea and the pH value of buffer) were optimized. In the absence of organic modifier, only five pairs of 8 separated dansyl-amino acids were resolved when run separately. A mixture of up to eight chiral amino acids can be baseline resolved in less than 19 min by β-cyclodextrin-modified capillary zone electrophoresis with a buffer of 60 mmol L^–1 H₃BO₃-KCl/40 mmol L^–1 NaOH (pH 9.0), 4 mol L^–1 urea, 100 mmol L^–1β-cyclodextrin and 10% (v/v) methanol.     

Construction of a High-Quality Organic-Inorganic Hybrid Heterostructure and Its Photo-response Performance

The combination of metal oxide and organic semiconductor for constructing organic–inorganic hybrid heterostructure is promising to offer unique optoelectronic properties. However, the distinct difference in electron structure and processing technology of the two types of materials makes it usually difficult to fully deliver their complementary advantages. Herein, we report the construction of a high quality organic/In₂O₃ hybrid heterostructure presenting a good ambipolar transport with average electron mobility >1 cm²·V^–1·s^–1 and hole mobility up to 0.4 cm²·V^–1·s^–1, respectively, together with a high-gain inverter. In addition, the incorporation with organic film on top of In₂O₃ remarkably reduces the dark current, enabling the realization of high photoconductivity response with photosensitivity of two magnitudes higher than that of pure In₂O₃. The photoconductor and phototransistor of the hybrid structure demonstrate high photoresponsivity >10³ AW^–1 and detectivity up to 10¹⁴ Jones, demonstrating the promising functionality of such a high quality hybrid heterostructure.      

A Porphyrin-Based Covalent Organic Framework for Metal-Free Photocatalytic Aerobic Oxidative Coupling of Amines

Imines are important intermediates in drug synthesis. Photocatalytic aerobic oxidative coupling of amines has been considered as a clean and promising way to produce imines and has attracted great attention. Herein, we designed and synthesized a novel two-dimensional porphyrin-based covalent organic framework (Por-BC-COF) which adopts an AA stacking mode with excellent crystallinity, high Brunauer–Emmett–Teller surface areas (1200 m² g⁻¹), wide light absorption range (200–1300 nm) and good stability in a variety of organic solvents. Por-BC-COF can be used as a metal-free heterogeneous photocatalyst for the photocatalytic oxidation of amines to imines under visible light and red light with a high yield (97 %). This work presents a novel and efficient COF photocatalyst in the application of light-driven organic synthesis.     

Facile Synthesis of Ultrastable Porous Aromatic Frameworks by Suzuki–Miyaura Coupling Reaction for Adsorption Removal of Organic Dyes

Porous aromatic frameworks (PAFs) with robust structure, high stability, and high surface area have attracted intense interest from scientists in diverse fields. However, there are still very few reports on the adsorption of organic dyes by PAFs. In this work, four new PAFs have been facilely synthesized by the polymerization of a tetrahedral-shaped (four-node) monomer with a series of three-node monomers through Suzuki–Miyaura coupling reactions. All the obtained materials possess hierarchical porous structures and show high thermal and chemical stability. The Brunauer–Emmett–Teller (BET) surface areas of these PAFs were determined to be 857 m² g⁻¹ for PAF-111 , 526 m² g⁻¹ for PAF-112A , 725 m² g⁻¹ for PAF-112B , and 598 m² g⁻¹ for PAF-113 . Rhodamine B was selected as a model organic dye to test the adsorption capacities of the obtained PAF materials. PAF-111 showed a maximum adsorption capacity of 1666 mg g⁻¹ (167 wt %) for Rhodamine B, which is among the highest values reported to date for porous organic materials. It is noteworthy that PAF-111 could be reused in at least ten cycles under the adsorption conditions without any loss of adsorption capacity. Our study has revealed the great potential and advantages of PAFs as ultrastable adsorption materials for the removal of organic dyes.     

Synthesis,Structure, and Physical Properties of 5,7,14,16‐Tetraphenyl‐8:9,12:13‐bisbenzo‐hexatwistacene

A novel compound, 5,7,14,16‐tetraphenyl‐8:9,12:13‐bisbenzo‐hexatwistacene ( TBH ), has been successfully synthesized through a retro‐Diels–Alder reaction. Single‐crystal structure analysis indicated that TBH has a twisted configuration with a torsion angle of 27.34°. The HOMO–LUMO gap of TBH calculated from the difference between the half‐wave redox potentials (E_1/2^ox=+0.40 eV and E_1/2^red=?1.78 eV) is 2.18 eV, which is in good agreement with the band gap (2.19 eV) derived from the UV/Vis absorption data. In addition, organic light‐emitting devices using TBH as emitter have been fabricated. The results revealed that TBH is a promising red light‐emitting candidate for applications in organic light‐emitting diodes.     

Convenient Synthesis of Lithium Methyl Selenide An Efficient Reagent for the SN2 Cleavage of Esters

The synthesis of alkyl selenides has attracted considerable attention^1-3 during the last few years in view of their importance as reagents and intermediates in organic synthesis.⁴ Several methods have been described for the introduction of selenium into organic molecules starting from elemental selenium.^1–3     

Study of solvent effects on the stability constant and ionic mobility of the dibenzo‐18‐crown‐6 complex with potassium ion by affinity capillary electrophoresis

The effect of solvent on the strength of noncovalent interactions and ionic mobility of the dibenzo‐18‐crown‐6 complex with K⁺ in water/organic solvents was investigated by using affinity capillary electrophoresis. The proportion of organic solvent (methanol, ethanol, propan‐2‐ol, and acetonitrile) in the mixtures ranged from 0 to 100 vol.%. The stability constant, K_KL, and actual ionic mobility of the dibenzo‐18‐crown‐6‐K⁺ complex were determined by the nonlinear regression analysis of the dependence of the effective electrophoretic mobility of dibenzo‐18‐crown‐6 on the concentration of K⁺ (added as KCl) in the background electrolyte (25 mM lithium acetate, pH 5.5, in the above mixed hydro–organic solvents). Competitive interaction of the dibenzo‐18‐crown‐6 with Li⁺ was observed and quantified in mixtures containing more than 60 vol.% of the organic solvent. However, the stability constant of the dibenzo‐18‐crown‐6‐Li⁺ complex was in all cases lower than 0.5 % of K_KL. The log K_KL increased approximately linearly in the range 1.62–4.98 with the increasing molar fraction of organic solvent in the above mixed solvents and with similar slopes for all four organic solvents used in this study. The ionic mobilities of the dibenzo‐18‐crown‐6‐K⁺ complex were in the range (6.1–43.4) × 10^?9 m² V^?1 s^?1.     

Polymerization and oxidation of pyrrole by organic electron acceptors

Simultaneous chemical polymerization and oxidation of pyrrole have been initiated by organic electron acceptors, 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) and tetrachloro-o-benzoquinone(chloranil). The polypyrrole (PPY) complexes so produced are semiconductive and granular in nature. For the PPY–DDQ and PPY–chloranil complexes obtained from bulk polymerization, the respective electrical conductivities (σ) are of the order of 10^?1 and 10^?3 ohm^?1 cm^?1. However, σ is substantially lower for the complexes prepared in solvent media. Both complexes are relatively stable in the atmosphere. Thin uniform films of the PPY–organic acceptor complexes have also been synthesized on SnO₂ electrode by electrochemical polymerization in acetonitrile. The physicochemical properties of the PPY–organic acceptor complexes prepared chemically under the various experimental conditions are examined in detail.     

Synthesis and electrochemical properties of activated carbons and Li4Ti5O12 as electrode materials for supercapacitors

New activated nanoporous carbons, produced by carbonization of mixtures of coal tar pitch and furfural with subsequent steam activation, as well as electrochemically active oxide Li₄Ti₅O₁₂, prepared by thermal co-decomposition of oxalates, were tested and characterized as electrode materials for electrochemical supercapacitors. The phase composition, microstructure, surface morphology and porous structure of the materials were studied. Pure carbon electrodes as well as composite electrodes based on these materials obtained were fabricated. Two types of supercapacitor (SC) cells were assembled and subjected to charge–discharge cycling study at different current rates: (1) symmetric sandwich-type SC cells with identical activated carbon electrodes and different organic electrolytes, and (2) asymmetric hybrid SC cell composed by activated graphitized carbon as a negative electrode and activated carbon–Li₄Ti₅O₁₂ oxide composite as a positive electrode, and an organic electrolyte (LiPF₆–dimethyl carbonate/ethylene carbonate (DMC/EC). Four types of carbons with different specific surface area (1,000–1,600 m² g^?1) and texture parameters, as well as three types of organic electrolytes: Et₄NBF₄–propylene carbonate (PC), LiBF₄–PC and LiPF₆–DMC/EC in the symmetric SC cell, were tested and compared with each other. Capacitance value up to 70 F g^?1 for the symmetric SC, depending on the electrolyte microstructure and conductivity of the carbon material used, and capacitance of about 150 F g^?1 for the asymmetric SC cell, with good cycleability for both supercapacitor systems, were obtained.     

Metal–Organic Frameworks and Other Crystalline Materials for Ultrahigh Superprotonic Conductivities of 10−2 S cm−1 or Higher

Proton-conducting materials in the solid state have received immense attention for their role as electrolytes in proton-exchange membrane fuel cells. Recently, crystalline materials—metal–organic frameworks (MOFs), hydrogen-bonded organic frameworks (HOFs), covalent organic frameworks (COFs), polyoxometalates (POMs), and porous organic crystals—have become an exciting research topic in the field of proton-conducting materials. For a better electrolyte, a high proton conductivity on the order of 10⁻² S cm⁻¹ or higher is preferred as efficient proton transport between the electrodes is ultimately necessary. With an emphasis on design principles, this Concept will focus on MOFs and other crystalline solid-based proton-conducting platforms that exhibit “ultrahigh superprotonic” conductivities with values in excess of 10⁻² S cm⁻¹. While only a handful of MOFs exhibit such an ultrahigh conductivity, this quality in other systems is even rarer. In addition to interpreting the structural–functional correlation by taking advantage of their crystalline nature, we address the challenges and promising directions for future research.     

Design and synthesis of "dumb-bell" and "triangular" inorganic-organic hybrid nanopolyoxometalate clusters and their characterisation through ESI-MS analyses

A series of tris(hydroxymethyl)aminomethane (TRIS)‐based linear (bis(TRIS)) and triangular (tris(TRIS)) ligands has been synthesised and were covalently attached to the Wells–Dawson type cluster [P₂V₃W₁₅O₆₂]^9? to generate a series of nanometer‐sized inorganic–organic hybrid polyoxometalate clusters. These huge hybrids, with a molecular mass similar to that of small proteins in the range of ≈10–16 kDa, were unambiguously characterised by using high‐resolution ESI‐MS. The ESI‐MS spectra of these compounds revealed, in negative ion mode, a characteristic pattern showing distinct groups of peaks corresponding to different anionic charge states ranging from 3^? to 8^? for the hybrids. Each peak in these individual groups could be unambiguously assigned to the corresponding hybrid cluster anion with varying combinations of tetrabutylammonium (TBA) and other cations. This study therefore highlights the prowess of the high‐resolution ESI‐MS for the unambiguous characterisation of large, nanoscale, inorganic–organic hybrid clusters that have huge mass, of the order of 10–16 kDa. Also, the designed synthesis of these compounds points to the fact that we were able to achieve a great deal of structural pre‐design in the synthesis of these inorganic–organic hybrid polyoxometalates (POMs) by means of a ligand design route, which is often not possible in traditional “one‐pot” POM synthesis.     

Preparation of Mg–Al layered double hydroxides intercalated with alkyl sulfates and investigation of their capacity to take up N,N-dimethylaniline from aqueous solutions

This study examined the effect of the interlayer spacing of a Mg–Al layered double hydroxide (Mg–Al LDH) on the ability of the Mg–Al LDH to take up a nonionic organic material. Mg–Al LDHs, intercalated with 1-propanesulfonate (PS^?), 1-hexanesulfonate (HS^?), and 1-dodecanesulfonate (DS^?), were prepared by coprecipitation, yielding PS·Mg–Al LDH, HS·Mg–Al LDH, and DS·Mg–Al LDH, respectively. The increase in the alkyl chain lengths of the Mg–Al LDHs (PS^? < HS^? < DS^?) resulted in the perpendicular orientation of the organic acid anions in the interlayer of Mg–Al LDH, which in turn resulted in more organic acid anions being accommodated in the interlayer space. An organic acid anion with a large molecular length was more easily intercalated in the interlayer of Mg–Al LDH than one with a small molecular length. This was attributed to the hydrophobic interaction between the alkyl chains, affecting the intercalation of the organic acid anions. The uptake of N,N-dimethylaniline (DMA) by Mg–Al LDHs increased in the order PS·Mg–Al LDH < HS·Mg–Al LDH < DS·Mg–Al LDH. The uptake was attributed to the hydrophobic interactions between DMA and the intercalated PS^?, HS^?, and DS^?. Thus, Mg–Al LDH, which has a lot of large interlayer spacings when intercalated with organic acid anions, can take up a large number of DMA molecules from an aqueous solution.