Spectrophotometric determination of thiocyanate via coprecipitation and thermal decomposition of copper(I) thiocyanate

A method for determination of thiocyanate (6–100 μg described. It is based on the coprecipitation of copper(I) thiocyanate with copper(I) iodide, followed by decomposition of copper(I) thiocyanate in air at 450°C. The decomposition products are CuS, CuO, SO₂, CO₂ and N₂. Released sulphur dioxide is absorbed in sodium tetrachloromercurate(II) solution, and determined spectrophotometrically with bleached p-rosaniline. The method is unaffected by the presence of halides, sulphide, sulphite and thiosulphate.     

Visible-light-mediated selective thiocyanation/ipso-cyclization/oxidation cascade for the synthesis of thiocyanato-containing azaspirotrienediones

A visible-light-mediated metal-free thiocyanate radical addition/ipso-cyclization/oxidation cascade reaction for the synthesis of thiocyanato-containing azaspirotrienediones from N-phenylpropynamides is described. Cheap and readily available ammonium thiocyanate was used as a precursor to the thiocyanate free radical, which undergoes a radical addition reaction with the alkyne, followed by selective ipso-cyclization and oxidation to afford the dearomatized products. No product of ortho-cyclization was detected. The reaction completes the synthesis of C–S, C–C, and CO bonds in one pot, with abundant and renewable air oxygen as the sole sacrificial reagent and oxygen source.     

Anwendung von ionenaustauschverfahren zur bestimmung von spurenelementen in natürlichen wässern—IV: Uran,kobalt und kadmium

A method is described for separating and determining. by spectrofluorimetric or spectrophotometric measurement, traces of uranium. cobalt and cadmium at ppM levels in natural waters. The sample is acidified with HCl. filtered. and after addition of ascorbic acid and potassium thiocyanate, passed through a column of Dowex 1.- × 8 anion-exchange resin in the thiocyanate form. The three ions are concentrated on the resin as thiocyanate complexes, being at the same time separated from most of the other ions present in the sample. Elution with a tetrahydrofuranmethylglycol-HCl mixture removes other interfering ions. then 6M HCl strips the cobalt. 1M HCl the uranium, and 2M HNO₃ the cadmium. Data are presented for concentrations of uranium (0·01–5 ppM) cobalt (0·04–1·9 ppM) and cadmium (0·04–0·6 ppM) in a large number of water sources in Austria.     

Fast analysis of thiocyanate by ion-pair chromatography with direct conductivity detection on a monolithic column

Fast analysis of thiocyanate by ion-pair chromatography using a silica-based monolithic column and direct conductivity detection was carried out. Chromatographic separation was performed on a Chromolith Speed ROD RP-18e using tetrabutylammonium hydroxide （TBA）-phthalic acid-acetonitrile as eluent. The effects of eluent concentration, eluent pH value, column temperature and flow rate on retention time of thiocyanate were investigated. The optimized chromatographic conditions for the determination of thiocyanate were as follows： 0.25 mmol/L TBA-0.18 mmol/L phthalate-7% acetonitrile （pH 5.5） as eluent, column temperature of 30 ℃, and flow rate of 6.0 mL/min. Retention time of thiocyanate was less than 1 min under the conditions. Common anions （Cl^-, NO3 , SO42 and I^- ） did not interfere with the determination of thiocyanate. Detection limit （S/N = 3） of thiocyanate was 0.96 mg/L. Calibration graph between peak area and the concentration of thiocyanate was linear in the range of 2.0- 100.0 mg/L. Relative standard deviation （RSD） of chromatographic peak area was 1.4% （n = 5）. This method has been applied to the determination of thiocyanate in ionic liquids. Recoveries of thiocyanate after spiking were 100.5%.     

The synthesis of di- and tetramethyl substituted macrocyclic polyether-diester ligands

Three series of macrocyclic polyether-diester ligands have been prepared from dimethyl triethylene glycol ( 20 ), two dimethyl tetraethylene glycols ( 21,23 ), dimethyl pentaethylene glycol ( 22 ) and tetramethyl tetraethylene glycol ( 24 ) and diglycolyl chloride (products 5–9 ), thiadiglycolyl chloride (products 10–14 ) and 2,6-pyridine dicarbonyl chloride (products 15–19 ). The eighteen-membered rings ( 6 and 16 ) formed solid potassium thiocyanate complexes. The eighteen- and twenty-one-membered ring compounds 6–8 and 16–18 complexed with benzylammonium perchlorate in methylene chloride-d₂ as shown by significant chemical shift changes in the ¹H nmr spectra.     

Influence of cyanide and sulphide ions on the reduction and reoxidation of cobalt(II) in thiocyanate solution at mercury electrodes

The process of reduction and reoxidation of cobalt(II) in thiocyanate solution at hanging mercury drop electrode has been investigated by cyclic voltammetric, chronoamperometric and anodic stripping methods. In 0.1 M NaSCN and 0.4 M NaClO₄ solution containing 1×10^?3M cobalt(II), the voltammogram on the first cycle at 0.05 V s^?1 gives a cathodic peak at ?1.06 V with hysteresis on reversal, and an anodic wave with a peak potential of ?0.28 V and with two shoulders near ?0.38 and ?0.45 V, respectively. Multicyclic voltammograms under the same conditions give a cathodic peak at ?0.90 V and an anodic peak at ?0.45 V. The reduction and reoxidation of cobalt(II) in thiocyanate solution is accelerated by the reduction products of thiocyanate ion, cyanide and sulphide ions, which are produced during the electroreduction of cobalt(II).A mechanism of reduction and reoxidation of cobalt(II) which involves a chemical reduction of thiocyanate ion by electroreduced metallic cobalt and takes into account cyanide and sulphide ions is proposed. The hysteresis on the cathodic wave is caused by the difference in reduction potentials of cobalt(II)-thiocyanate and-cyanide complexes. Cyclic voltammetric study of cobalt(II) in perchlorate solution containing trace amounts of cyanide and sulphide ions supports these conclusions.     

Structure of the Paramagnetic Products of Thiocyanate Photolysis at 77 K

Solid paramagnetic products of thiocyanate photolysis were studied at 77 K by EPR and diffuse reflectance spectroscopy. Ab initio calculations of the electronic structure of these products have been carried out. Direct UV irradiation can generate the SCN⁰ radical due to ionization of the thiocyanate ion. Interaction of the SCN⁰ radical with the neighboring thiocyanate ion forms another radical product of photolysis — (SCN)₂ ^- radical ion.     

Heterobimetallic Cu(II)–Hg(II) polynuclear complexes containing Hg(SCN)42− unit – Synthesis,spectroscopic investigations,X-ray studies and magnetic properties

Three novel heterobimetallic polymers with Hg(SCN)₄^2? as a linker have been synthesised and characterized by means of IR, EPR, magnetic measurements and single crystal X-ray. All the obtained compounds [Cu(bpzm)Hg(SCN)₄]_n (1), [Cu(bdmpzm)Hg(SCN)₄]_n (2) and [Cu(dpa)Hg(SCN)₄]_n (3) form supramolecular framework structures. The 1 creates a three-dimensional coordination polymer, and 2 and 3 form two-dimensional nets extending along crystallographic (0 1 0) plane. Each octahedrally coordinated Cu(II) atom of 1 connects to four mercury ions through four thiocyanate bridges, and each Hg(II) ion is bridged with four copper ions via four thiocyanate bridges. The Cu(II) ions of 2 and 3 display a pyramidal coordination geometry, and they are connected to three mercury ions through three thiocyanate bridges, one thiocyanate ion is nonbridging group.     

New spectrophotometric thiocyanate determination of iron in metals,alloys, acids and salts

A rapid, sensitive and fairly selective spectrophotometric thiocyanate method for the determination of traces of iron in metals, alloys, acids and salts is described. The iron is isolated from the bulk of the sample by solvent extraction with methyl isobutyl ketone from ₇N lithium chloride solution or ₇N hydrochloric acid. The iron (III) thiocyanate color is developed directly in the ketone extract and then measured spectrophotometrically.     

Proton-conducting membranes: poly (N-vinyl pyrrolidone) complexes with various ammonium salts

The present study focuses on the proton-conducting polymer electrolytes; poly (N-vinyl pyrrolidone)–ammonium thiocyanate and poly (N-vinyl pyrrolidone)–ammonium acetate prepared by solution casting technique. The XRD analysis indicates the amorphous nature of the polymer electrolytes. The Raman spectra of the C=O vibration of pure polymer PVP at 1,663 cm^?1 has been appeared as doublet in the polymer electrolytes. The introduction of this new peak in the salt-doped polymer electrolytes may be due to interaction of the cation with the polymer. The room temperature ionic conductivity σ _303κ has been found to be high, 1.7?×?10^?4 S cm^?1 for 80 mol% PVP–20 mol% NH₄SCN and 1.5?×?10^?6 S cm^?1 for 75 mol% PVP–25 mol% CH₃COONH₄. The polymer electrolytes have been tested for their application in Zn–air battery.     

Synthesis, spectroscopic characterization, X-ray structure, and DFT calculations of [Cu(tppz)(SCN)2]

This article presents a combined experimental and computational study of [Cu(tppz)(SCN)₂], where ttpz stands for 2,3,5,6-tetra-(2-pyridyl)pyrazine. The compound has been studied by IR, UV–Vis spectroscopy, and single crystal X-ray analysis. The geometry around copper atom may be described as a distorted square pyramid. The equatorial plane is defined by three nitrogen atoms of tppz and one nitrogen atom of thiocyanate group. The apical site is occupied by nitrogen atom of the second SCN^? ion. The electronic spectrum of [Cu(tppz)(SCN)₂] was analyzed, and bands were assigned through the DFT/TDDFT procedures.     

Complex formation of thiocyanate ions with iron(III) on the solid phase of fibrous ion exchangers

Characteristics of complex formation of SCN^–-ions with iron(III) on fibrous materials filled with an AV-17 anion exchanger (PANV–AV-17) and a KU-2 cation exchanger (PANV–KU-2) are studied by diffuse reflection spectroscopy. Sorption conditions of thiocyanate ions on PANV–AV-17 in the dynamic mode and the influence of concentrations of Cl^–, SO ₄ ^2- and NO ₃ ^- on the sorption and analytical signals of thiocyanate complexes are studied. Sorption conditions of iron(III) on PANV–KU-2 and the conditions of formation of thiocyanate complexes are studied. Systems for the sorption–spectroscopic determination of 0.1–0.7 μg/mL of SCN^–-ions in aqueous solutions of pH 5 ± 1 on PANV–AV-17 and test-determination of 5–30 μg of SCN^–-ions on PANV–KU-2 are proposed.     

The Oxidation of Thiocyanate to Polythiocyanic Acid Using Peroxydisulfate in Aqueous Solution

Abstract

The oxidation of thiocyanate to polythiocyanic acid by peroxydisulfate was carried out in an aqueous solution at room temperature. The primary step is the decomposition of peroxydisulfate into sulfate-free radicals. At room temperature in the presence of peroxydisulfate as a oxidizing agent, HSCN polymerizes to (HSCN)_n. The oxidation of thiocyanate in an aqueous solution is often complicated, but here we obtained the polythiocyanic acid as a major product. The products were characterized by elemental analysis, IR, UV- visible, H-NMR spectroscopy, and X-ray powder diffraction.     

A reactant promoted solvent free synthesis of 3,4-dihydropyrimidin-2(1H)-thione analogues using ammonium thiocyanate

This is the first-time ammonium thiocyanate (NH₄SCN) has been used as a self-promoting reactant for the synthesis of 3,4-dihydropyrimidin-2(1H)-thiones. This report describes a greener, efficient and economic protocol for one pot three-component synthesis of Biginelli compounds using various aldehydes, β-ketoesters and ammonium thiocyanate. Ammonium thiocyanate being a weak acid, accelerate the rate of reaction to obtain Biginelli compounds in solvent-free condition at 110 °C. The key advantages of the present method are high yields, short reaction time, solvent free condition, easy workup and ability to tolerate a variety of functional groups. Ammonium thiocyanate is readily available, cheaper, safer and industrial acceptable material which gives economical as well as ecological rewards to the present method.     

Synthesis,characterization, and photochemistry of the supramolecules formed from chromium(III) thiocyanato anion associated with crown ethers

A series of anionic chromium(III) thiocyanato complexes with metal crown ether cations have been prepared and characterized. These complexes have the form [Crown-M]₂⁺[Cr(NCS)₅(H₂O)]²⁻ and [Crown-M]₃⁺[Cr(NCS)₆]³⁻, where M=Na⁺, K⁺, or NH₄⁺ and crown represents the crown ether. The crown ethers are 15-crown-5, B-15-crown-5, 18-crown-6, DB-18-crown-6, and DB-24-crown-8, where B- and DB- stand for benzo- and dibenzo-, respectively. The complexes are stable for at least 20 h in the dark in dimethylformamide(DMF) or in acetonitrile, and they release thiocyanate slowly, k=(0.71–2.67)×10⁻⁹ mol/(L s) in acetonitrile in the dark. Photoanation of thiocyanate was observed for the complexes in DMF and in acetonitrile. The quantum yields of thiocyanate release in DMF and in acetonitrile are reported. The quantum yields were in the range 0.05 to 0.52 mol einstein⁻¹ and were solvent and wavelength dependent. In general, larger quantum yields were observed in DMF than in acetonitrile. The photoreaction mechanism is discussed.     

[Cu(L)](NO3)2 (L=4,7‐Bis(3‐aminopropyl)‐1‐thia‐4,7‐diazacyclononane) as a Suitable Ionophore for Construction of Thiocyanate‐Selective Electrodes and Their Use in Determination of Urinary and Salivary Thiocyanate Concentration

The construction, performance characteristics, and application of polymeric membrane (PME) and coated graphite (CGE) thiocyanate‐selective electrodes are reported. The electrodes were prepared by incorporating the complex [Cu(L)](NO₃)₂ (L=4,7‐bis(3‐aminopropyl)‐1‐thia‐4,7‐diazacyclononane) into a plasiticized poly(vinyl chloride) membrane. The influence of membrane composition, pH of test solution, and foreign ions were investigated. The electrodes reveal Nernstian behavior over a wide SCN^? ion concentration range (1.0×10^?6–1.0×10^?1 M for PME and 5.0×10^?7–1.0×10^?2 M for CGE) and show fast dynamic response times of 15 s and lower. The proposed sensors show high selectivity towards thiocyanate over several common organic and inorganic anions. They were successfully applied to the direct determination of thiocyanate in urine and saliva of smokers and nonsmokers, and as an indicator electrode in titration of Ag⁺ ions with thiocyanate.     

Linkage isomerism in 5-exo thiocyanate and isothiocyanate substituted tricarbonyl(η-cyclohexa-1,3-diene)iron and tricarbonyl(η-cyclohepta-1,3-diene)iron

Nucleophilic addition to the tricarbonyl(η-cyclohexadienyl)iron cation and the tricarbonyl(η-cycloheptadienyl)iron cation by the thiocyanate ion forms initially the 5-exo-isothiocyanate (NCS) isomers, C₆H₇NCSFe(CO)₃ and C₇H₉NCSFe(CO)₃, both of which isomerise to the corresponding 5-exo thiocyanate isomers C₆H₇SCNFe(CO)₃ and C₇H₉SCNFe(CO)₃ on exposure to air.     

Quantification of methyl thiocyanate in the headspace of Pseudomonas aeruginosa cultures and in the breath of cystic fibrosis patients by selected ion flow tube mass spectrometry

Infection by Pseudomonas aeruginosa (PA) is a major cause of morbidity and mortality in patients with cystic fibrosis (CF). Breath analysis could potentially be a useful diagnostic of such infection, and analyses of volatile organic compounds (VOCs) emitted from PA cultures are an important part of the search for volatile breath markers of PA lung infection. Our pilot experiments using solid‐phase microextraction, SPME and gas chromatography/mass spectrometric (GC/MS) analyses of volatile compounds produced by PA strains indicated a clear presence of methyl thiocyanate. This provided a motivation to develop a method for real‐time online quantification of this compound by selected ion flow tube mass spectrometry, SIFT‐MS. The kinetics of reactions of H₃O⁺, NO⁺ and O₂^+? with methyl thiocyanate at 300 K were characterized and the characteristic product ions determined (proton transfer for H₃O⁺, rate constant 4.6 × 10^–9 cm³ s^–1; association for NO⁺, 1.7 × 10^–9 cm³ s^–1 and nondissociative charge transfer for O₂^+?_, 4.3 × 10^–9 cm³ s^–1). The kinetics library was extended by a new entry for methyl thiocyanate accounting for overlaps with isotopologues of hydrated hydronium ions. Solubility of methyl thiocyanate in water (Henry's law constant) was determined using standard reference solutions and the linearity and limits of detection of both SIFT‐MS and SPME‐GC/MS methods were characterized. Thirty‐six strains of PA with distinct genotype were cultivated under identical conditions and 28 of them (all also producing HCN) were found to release methyl thiocyanate in headspace concentrations greater than 6 parts per billion by volume (ppbv). SIFT‐MS was also used to analyze the breath of 28 children with CF and the concentrations of methyl thiocyanate were found to be in the range 2–21 ppbv (median 7 ppbv). Copyright © 2011 John Wiley & Sons, Ltd.     

Thiocyanation of N-arenesulfonyl-N′-aroyl-1,4-benzoquinone diimines

The reaction of N-arenesulfonyl-N′-aroyl-1,4-benzoquinone diimines with potassium thiocyanate in glacial acetic acid occurs as 1,4-addition of thiocyanate ion by the sulfur atom to the quinoid ring in the meta position with respect to the aroyl group. The addition products, N-[4-(arenesulfonamido)-3-thiocyanatophenyl]-benzamides, partially undergo intramolecular cyclization to N-(2-imino-3-arenesulfonyl-2,3-dihydro-1,3-benzothiazol-6-yl)benzamides whose hydrolysis yields 2-amino-6-benzamido-1,3-benzothiazol-3-ium arenesulfonates. The latter lose arenesulfonic acid with formation of N-(2-amino-1,3-benzothiazol-6-yl)benzamides on treatment with a mixture of methanol with water and acetic acid.     

Aerobic intramolecular aminothiocyanation of unactivated alkenes promoted by in situ generated iodine thiocyanate

Aerobic intramolecular aminothiocyanation of unactivated alkenes has been developed by in situ generated iodine thiocyanate under open-flask conditions. This protocol provides a concise and efficient method for synthesizing SCN-containing pyrrolidine, piperidine and indoline derivatives with isolated yields of up to 87%. Furthermore, mixing iodine and sodium thiocyanate with oxygen afforded iodine thiocyanate (ISCN) and dithiocyanatoiodate [I(SCN)₂]^- which were testified by liquid chromatography mass spectrometry. A mechanistic investigation indicates that iodonium ion and sulfonium ion intermediates might be involved in this transformation.