Study of a Filtered Flamelet Formulation for Large Eddy Simulation of Premixed Turbulent Flames

Despite significant advances in the understanding and modelling of turbulent combustion, no general model has been proposed for simulating flames in industrial combustion devices. Recently, the increase in computational possibilities has raised the hope of directly solving the large turbulent scales using large eddy simulation (LES) and capturing the important time-dependant phenomena. However, the chemical reactions involved in combustion occur at very small scales and the modelling of turbulent combustion processes is still required within the LES framework. In the present paper, a recently presented model for the LES of turbulent premixed flames is presented, analysed and discussed. The flamelet hypothesis is used to derive a filtered source term for the filtered progress variable equation. The model ensures proper flame propagation. The effect of subgrid scale (SGS) turbulence on the flame is modelled through the flame-wrinkling factor. The present modelling of the source term is successfully tested against filtered direct numerical simulation (DNS) data of a V-shape flame. Further, a premixed turbulent flame, stabilised behind an expansion, is simulated. The predictions agree well with the available experimental data, showing the capabilities of the model for performing accurate simulations of unsteady premixed flames.     

Large Eddy Simulation of Turbulent Premixed Swirling Flames Using Dynamic Thickened Flame with Tabulated Detailed Chemistry

A sub-grid scale (SGS) combustion model by combining dynamic thickened flame (DTF) with flamelet generated manifolds (FGM) tabulation approach (i.e. DTF-FGM) is developed for investigating turbulent premixed combustion. In contrast to the thickened flame model, the dynamic thickening factor of the DTF model is determined from the flame sensor, which is obtained from the normalized gradient of the reaction progress variable from the one-dimensional freely propagating premixed flame simulations. Therewith the DTF model can ensure that the thickening of the flame is limited to the regions where it is numerically necessary. To describe the thermo-chemistry states, large eddy simulation (LES) transport equations for two characteristic scalars (the mixture fraction and the reaction progress variable) and relevant sub-grid variances in the DTF-FGM model are presented. As to the evaluation of different SGS combustion models, another model by utilizing the combination of presumed probability density function (PPDF) and FGM (i.e. PPDF-FGM) is also described. LES of two cases with or without swirl in premixed regime of the Cambridge swirl burner flames are performed to evaluate the developed SGS combustion model. The predicted results are compared with the experimental data in terms of the influence of different LES grids, model sensitivities to the thickening factor, the wrinkling factor, and the PPDF of characteristic scalars, the evaluation of different modelling approaches for the sub-grid variances of characteristic scalars, and the predictive capability of different SGS combustion models. It is shown that the LES results with the DTF-FGM model are in reasonable agreement with the experimental data, and better than the results with the PPDF-FGM approach due to its ability to predict better in regions where flame is not resolved.     

Large Eddy Simulation of a Propagating Turbulent Premixed Flame

A large eddy simulation of a turbulent premixed flame propagatingthrough a chamber containing a square obstruction is presented anddiscussed. The governing equations for compressible, reacting flowsare Favre filtered and turbulence closure is achieved using thedynamic Smagorinsky subgrid model. A simple flame surface densitymodel based on the flamelet concept is employed for the subgrid scalereaction rate. The simulation gives very good agreement with experimentalresults for the speed and the shape of the flame as it propagates throughthe chamber. The peak pressures, however, are underpredicted by20–30%. Reasons for this are discussed and it is concluded that amore sophisticated combustion model is required for complex flowssuch as this one, if a more accurate prediction of the pressureis to be achieved.     

Large Eddy Simulation of Premixed Turbulent Flames Using the Probability Density Function Approach

In the present study a Large Eddy Simulation and Filtered Density Function model is applied to three premixed piloted turbulent methane flames at different Reynolds Numbers using the Eulerian stochastic fields approach. The model is able to reproduce the flame structure and flow characteristics with a low number of fields (between 4 and 16 fields). The results show a good agreement with experimental data with the same closures employed in non-premixed combustion without any adjustment for combustion regime. The effect of heat release on the flow field is captured correctly. A wide range of sensitivity studies is carried out, including the number of fields, the chemical mechanism, differential diffusion effects and micro-mixing closures. The present work shows that premixed combustion (at least in the conditions under study) can be modelled using LES-PDF methods.. Finally, the ability of the model to predict flame quenching is studied. The model can accurate capture the conditions at which combustion is not sustainable and large pockets of extinction appear.     

Large Eddy Simulation of a Bluff Body Stabilised Premixed Flame Using Flamelets

Large Eddy Simulations of an unconfined turbulent lean premixed flame, which is stabilised behind a bluff body, are conducted using unstrained flamelets as the sub-grid scale combustion closure. The statistics from the simulations are compared with the corresponding data obtained from the experiment and it is demonstrated that the experimental observations are well captured. The relative positioning of the shear layers and the flame brush are analysed to understand the radial variations of the turbulent kinetic energy at various streamwise locations. These results are also compared to confined bluff body stabilised flames, to shed light on the relative role of incoming and shear driven turbulence on the behaviour of the flame brush and the turbulent kinetic energy variation across it.     

Subgrid Modeling of Turbulent Premixed Flames in the Flamelet Regime

Large eddy simulation (LES) models for flamelet combustion are analyzed by simulating premixed flames in turbulent stagnation zones. ALES approach based on subgrid implementation of the linear eddy model(LEM) is compared with a more conventional approach based on the estimation of the turbulent burning rate. The effects of subgrid turbulence are modeled within the subgrid domain in the LEM-LES approach and the advection (transport between LES cells) of scalars is modeled using a volume-of-fluid (VOF) Lagrangian front tracking scheme. The ability of the VOF scheme to track the flame as a thin front on the LES grid is demonstrated. The combined LEM-LES methodology is shown to be well suited for modeling premixed flamelet combustion. The geometric characteristics of the flame surfaces, their effects on resolved fluid motion and flame-turbulence interactions are well predicted by the LEM-LES approach. It is established here that local laminar propagation of the flamelets needs to be resolved in addition to the accurate estimation of the turbulent reaction rate. Some key differences between LEM-LES and the conventional approach(es) are also discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Large Eddy Simulations of the Darmstadt Turbulent Stratified Flames with REDIM Reduced Kinetics

Turbulent stratified combustion is often found in practical combustion devices, however, for large eddy simulations (LES) of it is still a challenge. In the present work, LES of the Darmstadt turbulent stratified flame (TSF) cases are conducted. In total, one isothermal flow case A-i2 and four reacting cases with different combinations of stratification and shear, i.e., A-r, C-r, E-r, G-r cases, are simulated. The employed sub-grid scale (SGS) combustion model is the REDIM-PFDF model, in which the chemical kinetics is reduced into a two-dimensional chemistry look-up table by the reaction-diffusion manifolds (REDIM) method, which performs a model reduction based on the coupling of the chemical kinetics with molecular transport. The fluctuation of scalars within the LES filter volume is modeled by the presumed filtered density function (PFDF). The overall good agreement of the statistics of velocity, temperature and species with the experimental data demonstrates the capability of the REDIM-PFDF model for TSF. Additionally, the probability distributions of the alignment angle, α, between the reaction layer and mixing layer, are analyzed in detail. It is shown that the probability distributions of the alignment angel vary with the axial distance from the jet nozzle. It also reveals that, with a stronger turbulence, the stratification effect can be weakened and the probability difference for finding ‘back-supported’ and ‘front-supported’ flame modes tends to decrease.     

Linear Eddy Mixing Model Studies of High Karlovitz Number Turbulent Premixed Flames

Turbulent premixed flames exhibit different structural and propagation characteristics with increasing upstream turbulence intensity starting from thin wrinkled flames in the Corrugated Flamelet regimes to a flame with a thicker preheat zone in the Thin Reaction Zone Regime (TRZ) and finally, becoming more disorganized or broken in the Distributed or Broken Reaction Zone (D/BRZ) regimes under intense turbulence. A single comprehensive predictive model that can span all regimes does not currently exist, and in this study we explore the ability of the stand-alone one-dimensional linear-eddy mixing (LEM) model to simulate the flames in all these regimes. Past applications of this 1DLEM model have demonstrated reasonable predictions in the flamelet and TRZ regimes and here, new experiments in the TRZ regime are specifically addressed to evaluate the predictive capability of this model. Additional simulations in the D/BRZ regimes (where no data is currently available) are performed to determine if the model can be extended to the high turbulence regime. Comparison with the data in the TRZ regime shows satisfactory agreement. Analysis suggests varying levels of preheat zone broadening in all the TRZ and D/BRZ cases. While the average heat release distribution for the TRZ cases is nearly identical to the laminar unstrained baseline, changes to the species and heat release distribution are observed only at a high Karlovitz Number K a > 10³. In the D/BRZ regime it is shown that the transition is related to enhanced turbulent diffusion that dominates molecular diffusion effects causing deviations from the laminar baseline.     

A Priori Evaluation of the Laminar Flamelet Decomposition Model for Turbulent Premixed Flames using DNS Data

Laminar flamelet decomposition (LFD) is a dynamic approach for modelling sub-filter scale turbulence-chemistry interactions in Large-Eddy Simulations using a stretched flamelet library. In this work, the performance of the LFD model – that was previously used only in non-premixed combustion—is investigated a priori for premixed combustion using positively-strained flamelets in the reactant-to-product configuration. For this purpose, a DNS database of methane-air premixed flames is utilized. The flames are propagating in a rectangular box under homogeneous isotropic turbulence conditions over a wide range of Karlovitz numbers. The results show that the LFD model can correctly account for the sub-filter scale turbulence-chemistry interactions to predict the filtered reaction rates and the filtered scalar field, provided that turbulent and laminar mixing are well predicted. The deviations from the DNS results are attributed to the shortcomings of the strained flamelet library and the non-flamelet effects. Finally, the LFD results are compared with a different sub-filter scale model using the same strained flamlelet library, and the relative performances of the two models are discussed.—

     

Large Eddy Simulation and PIV Measurements of Unsteady Premixed Flames Accelerated by Obstacles

In gas explosions, the unsteady coupling of the propagating flame and the flow field induced by the presence of blockages along the flame path produces vortices of different scales ahead of the flame front. The resulting flame–vortex interaction intensifies the rate of flame propagation and the pressure rise. In this paper, a joint numerical and experimental study of unsteady premixed flame propagation around three sequential obstacles in a small-scale vented explosion chamber is presented. The modeling work is carried out utilizing large eddy simulation (LES). In the experimental work, previous results (Patel et al., Proc Combust Inst 29:1849–1854, 2002) are extended to include simultaneous flame and particle image velocimetry (PIV) measurements of the flow field within the wake of each obstacle. Comparisons between LES predictions and experimental data show a satisfactory agreement in terms of shape of the propagating flame, flame arrival times, spatial profile of the flame speed, pressure time history, and velocity vector fields. Computations through the validated model are also performed to evaluate the effects of both large-scale and sub-grid scale (SGS) vortices on the flame propagation. The results obtained demonstrate that the large vortical structures dictate the evolution of the flame in qualitative terms (shape and structure of the flame, succession of the combustion regimes along the path, acceleration-deceleration step around each obstacle, and pressure time trend). Conversely, the SGS vortices do not affect the qualitative trends. However, it is essential to model their effects on the combustion rate to achieve quantitative predictions for the flame speed and the pressure peak.     

Direct Numerical Simulations of Premixed Turbulent Flames with Reduced Chemistry: Validation and Flamelet Analysis

Direct numerical simulation is a very powerful tool to evaluate the validity of new models and theories for turbulent combustion. In this paper, direct numerical simulations of spherically expanding premixed turbulent flames in the thin reaction zone regime and in the broken reaction zone regime are performed. The flamelet-generated manifold method is used in order to deal with detailed reaction kinetics. The computational results are analyzed by using an extended flame stretch theory. It is investigated whether this theory is able to describe the influence of flame stretch and curvature on the local burning velocity of the flame. It is found that if the full profiles of flame stretch and curvature through the flame front are included in the theory, the local mass burning rate is well predicted. The influence of several approximations, which are used in other existing theories, is studied. When flame stretch is assumed constant through the flame front or when curvature of the flame front is neglected, the theory fails to predict the local mass burning rate. The influence of using a reduced chemistry model is investigated by comparing flamelet simulations with reduced and detailed chemistry.     

Combined Influence of Strain and Heat Loss on Turbulent Premixed Flame Stabilization

The present paper argues that the prediction of turbulent premixed flames under non-adiabatic conditions can be improved by considering the combined effects of strain and heat loss on reaction rates. The effect of strain in the presence of heat loss on the consumption speed of laminar premixed flames was quantified by calculations of asymmetric counterflow configurations (“fresh-to-burnt”) with detailed chemistry. Heat losses were introduced by setting the temperature of the incoming stream of products on the “burnt” side to values below those corresponding to adiabatic conditions. The consumption speed decreased in a roughly exponential manner with increasing strain rate, and this tendency became more pronounced in the presence of heat losses. An empirical relation in terms of Markstein number, Karlovitz Number and a non-dimensional heat loss parameter was proposed for the combined influence of strain and heat losses on the consumption speed. Combining this empirical relation with a presumed probability density function for strain in turbulent flows, an attenuation factor that accounts for the effect of strain and heat loss on the reaction rate in turbulent flows was deduced and implemented into a turbulent combustion model. URANS simulations of a premixed swirl burner were carried out and validated against flow field and OH chemiluminescence measurements. Introducing the effects of strain and heat loss into the combustion model, the flame topology observed experimentally was correctly reproduced, with good agreement between experiment and simulation for flow field and flame length.     

A 5-D Implementation of FGM for the Large Eddy Simulation of a Stratified Swirled Flame with Heat Loss in a Gas Turbine Combustor

Numerical simulations are foreseen to provide a tremendous increase in gas-turbine burners efficiency in the near future. Modern developments in numerical schemes, turbulence models and the consistent increase of computing power allow Large Eddy Simulation (LES) to be applied to real cold flow industrial applications. However, the detailed simulation of the gas-turbine combustion process remains still prohibited because of its enormous computational cost. Several numerical models have been developed in order to reduce the costs of flame simulations for engineering applications. In this paper, the Flamelet-Generated Manifold (FGM) chemistry reduction technique is implemented and progressively extended for the inclusion of all the combustion features that are typically observed in stationary gas-turbine combustion. These consist of stratification effects, heat loss and turbulence. Three control variables are included for the chemistry representation: the reaction evolution is described by the reaction progress variable, the heat loss is described by the enthalpy and the stratification effect is expressed by the mixture fraction. The interaction between chemistry and turbulence is considered through a presumed beta-shaped probability density function (PDF) approach, which is considered for progress variable and mixture fraction, finally attaining a 5-D manifold. The application of FGM in combination with heat loss, fuel stratification and turbulence has never been studied in literature. To this aim, a highly turbulent and swirling flame in a gas turbine combustor is computed by means of the present 5-D FGM implementation coupled to an LES turbulence model, and the results are compared with experimental data. In general, the model gives a rather good agreement with experimental data. It is shown that the inclusion of heat loss strongly enhances the temperature predictions in the whole burner and leads to greatly improved NO predictions. The use of FGM as a combustion model shows that combustion features at gas turbine conditions can be satisfactorily reproduced with a reasonable computational effort. The implemented combustion model retains most of the physical accuracy of a detailed simulation while drastically reducing its computational time, paving the way for new developments of alternative fuel usage in a cleaner and more efficient combustion.     

Subgrid Scale Modeling in Large-Eddy Simulation of Turbulent Combustion Using Premixed Flamelet Chemistry

Large-eddy simulation (LES) of turbulent combustion with premixed flamelets is investigated in this paper. The approach solves the filtered Navier–Stokes equations supplemented with two transport equations, one for the mixture fraction and another for a progress variable. The LES premixed flamelet approach is tested for two flows: a premixed preheated Bunsen flame and a partially premixed diffusion flame (Sandia Flame D). In the first case, we compare the LES with a direct numerical simulation (DNS). Four non-trivial models for the chemical source term are considered for the Bunsen flame: the standard presumed beta-pdf model, and three new propositions (simpler than the beta-pdf model): the filtered flamelet model, the shift-filter model and the shift-inversion model. A priori and a posteriori tests are performed for these subgrid reaction models. In the present preheated Bunsen flame, the filtered flamelet model gives the best results in a priori tests. The LES tests for the Bunsen flame are limited to a case in which the filter width is only slightly larger than the flame thickness. According to the a posteriori tests the three models (beta-pdf, filtered flamelet and shift-inversion) show more or less the same results as the trivial model, in which subgrid reaction effects are ignored, while the shift-filter model leads to worse results. Since LES needs to resolve the large turbulent eddies, the LES filter width is bounded by a maximum. For the present Bunsen flame this means that the filter width should be of the order of the flame thickness or smaller. In this regime, the effects of subgrid reaction and subgrid flame wrinkling turn out to be quite modest. The LES-results of the second case (Sandia Flame D) are compared to experimental data. Satisfactory agreement is obtained for the main species. Comparison is made between different eddy-viscosity models for the subgrid turbulence, and the Smagorinsky eddy-viscosity is found to give worse results than eddy-viscosities that are not dominated by the mean shear. Paper presented on the Eccomas Thematic Conference Computational Combustion 2007, submitted for a special issue of Flow, Turbulence and Combustion.     

Numerical Simulation of Non-premixed Turbulent Combustion Using the Eddy Dissipation Concept and Comparing with the Steady Laminar Flamelet Model

Numerical simulations of the Sandia flame CHNa and the Sydney bluff-body stabilized flame HM1E are reported and the results are compared to available experimental data. The numerical method is based on compressible URANS formulations which were implemented recently in the OpenFOAM toolbox. In this study, the calculations are carried out using the conventional compressible URANS approach and a standard k- ?? turbulence model. The Eddy Dissipation Concept with a detailed chemistry approach is used for the turbulence-chemistry interaction. The syngas (CO/H₂) chemistry diluted by 30 % nitrogen in the Sandia flame CHNa and CH₄/H₂ combustion in the Sydney flame HM1E are described by the full GRI-3.0 mechanism. A robust implicit Runge-Kutta method (RADAU5) is used for integrating stiff ordinary differential equations to calculate the reaction rates. The radiation is treated by the P1-approximation model. Both target flames are predicted with the Steady Laminar Flamelet model using the commercial code ANSYS FLUENT as well. In general, there is good agreement between present simulations and measurements for both flames, which indicates that the proposed numerical method is suitable for this type of combustion, provides acceptable accuracy and is ready for further combustion application development.     

Modelling of a Premixed Swirl-stabilized Flame Using a Turbulent Flame Speed Closure Model in LES

This paper proposes a combustion model based on a turbulent flame speed closure (TFC) technique for large eddy simulation (LES) of premixed flames. The model was originally developed for the RANS (Reynolds Averaged Navier Stokes equations) approach and was extended here to LES. The turbulent quantities needed for calculation of the turbulent flame speed are obtained at the sub grid level. This model was at first experienced via an test case and then applied to a typical industrial combustor with a swirl stabilized flame. The paper shows that the model is easy to apply and that the results are promising. Even typical frequencies of arising combustion instabilities can be captured. But, the use of compressible LES may also lead to unphysical pressure waves which have their origin in the numerical treatment of the boundary conditions.     

Scalar Dissipation Rate Transport in the Context of Large Eddy Simulations for Turbulent Premixed Flames with Non-Unity Lewis Number

The effects of global Lewis number Le on the statistical behaviour of the unclosed terms in the transport equation of the Favre-filtered scalar dissipation rate (SDR) Ñ _c have been analysed using a Direct Numerical Simulation (DNS) database of freely propagating statistically planer turbulent premixed flames with Le ranging from 0.34 to 1.2. The DNS data has been explicitly filtered to analyse the statistical behaviour of the unclosed terms in the SDR transport equation arising from turbulent transport T ₁, density variation due to heat release T ₂, scalar-turbulence interaction T ₃, reaction rate gradient T ₄, molecular dissipation (?D ₂) and diffusivity gradients f(D) in the context of Large Eddy Simulations (LES). It Le has significant effects on the magnitudes of T ₁, T ₂, T ₃, T ₄, (?D ₂) and f(D). Moreover, both qualitative and quantitative behaviours of the unclosed terms T ₁, T ₂, T ₃, T ₄, (?D ₂) and f(D) are found to be significantly affected by the LES filter width Δ, which have been explained based on a detailed scaling analysis. Both scaling analysis and DNS data suggest that T ₂, T ₃, T ₄, (?D ₂) and f(D) remain leading order contributors to the SDR \(\tilde {{N}}_{c} \) transport for LES. The scaling estimates of leading order contributors to the SDR \(\tilde {{N}}_{c} \) transport has been utilised to discuss the possibility of extending an existing SDR model for Reynolds Averaged Navier Stokes (RANS) simulation for SDR \(\tilde {{N}}_{c} \) closure in the context of LES of turbulent premixed combustion.