一个函数不等式的加强与延伸

从一个常见的不等式谈起,分析了多种证明方法,运用该不等式推导出了多个重要结论,对不等式进行了扩充和加强,解释了蕴含的意义,显示了该不等式的重要性和深刻性.     

基于粗糙集的患者满意度评价模型及其实证分析

在文献阅读及实地调研的基础上,本文提出了患者满意度的定义,建立了影响患者满意度的指标体系,介绍了粗糙集的相关概念及利用粗糙集进行评价的步骤,提出了新的约简方法,构建了基于粗糙集的患者满意度评价模型并进行了实证分析,得出了影响患者满意度的关键指标,并计算了关键指标权重,对江西省十个医院进行了综合评价值的计算.     

交通运输系统协调发展理论与模型研究

提出了交通运输系统协调度的评价分析模型.从系统论的观点出发,提出了交通运输系统协调理论的概念,探讨了交通运输系统随时间而不断演化变迁的规律,给出了交通运输系统协调发展基本步骤;并根据协调学原理,讨论了交通运输系统的协调性问题,提出了系统协调发展模型,对交通运输子系统内部及子系统之间及系统整体的协调发展问题进行了研究,探讨了交通运输可持续发展的系统协调管理过程,为进一步研究交通运输系统的可持续发展奠定了基础.     

关于举办2012年中学生数学奥林匹克夏令营活动的启事

从1996年至今,华中师范大学数学与统计学学院已成功举办多届全国中学生数学奥林匹克夏令营活动,培养了大批优秀的数学竞赛选手,他们经过权威名师的指点,既丰富了理论知识,更掌握了实践经验,为走上成功明确了航向,在国内、国际数学竞赛中取得了令人瞩目的成绩。我院已成为全国数学奥林匹克活动的重要培训基地,吸引了众多优秀中学生云集武汉参     

系统动力学在城市污水再生回用系统中的应用

用系统动力学方法研究了城市污水回用系统.首先分析了影响城市污水回用系统的诸多因素以及它们之间的相互关系,探讨了污水再生回用系统行为和结构的特点,确定了系统中因素之间的定量关系,建立了城市污水回用系统动力学(SD)模型,并介绍了模型的检验方法.同时给出了SD模型的具体应用实例,对西北地区的某一城市的污水回用进行了预测和分析,提出了符合该城市发展的污水回用方案.     

压板松动时大型发电机端部绕组的主共振与分岔

研究了大型汽轮发电机定子端部固定绕组的压板松动时,位于两侧压板间某段绕组的振动问题．首先,采用分离变量法,给出了发电机运行时定子端部绕组区域的磁感应强度表达式,并给出了绕组所受电磁力及与松动压板间摩擦力的计算式．其次,建立了研究绕组非线性振动问题的力学分析模型,采用多尺度法对主共振情形进行了解析求解,推得了稳态运动下的幅频响应方程,并对定常解的稳定性及分岔奇异性进行了研究,得到了稳定性的判定条件及分岔方程的转迁集．最后,针对工程实际问题进行了计算,给出了相应的幅频响应曲线图,并进行了分析讨论．     

求解资源受限项目调度问题的人工鱼群算法

提出了将人工鱼群算法应用于求解资源受限项目调度问题中的构想,建立了求解资源受限项目调度问题的人工鱼群算法模型,设计了一种标准随机键编码方式,构建了人工鱼的觅食行为、聚群行为、追尾行为和随机行为四种基本算子,采用了正向逆向局部改进技术和精英保留策略,并给出了算法流程。应用PSPLIB标准问题库对该算法进行了大量的测试,并与其他算法进行了比较,验证了该算法的有效性。     

红树林自然保护区湿地生态系统的数学模型及其应用

研究了红树林自然保护区自然环境和人类社会活动对于生态系统的影响,考虑了生物之间的相互关系,将生物量、生物生长的面积等作为主要指标,建立了常微分方程组模型,对生态系统的变化情况进行了描述,借助稳定性分析对方程进行了研究,并进行了数值模拟。根据理论分析和数值模拟的结果,对保护区的林木恢复工作提出了合理的建议。     

一个游戏难题的推广、建模及求解

推广了RPG游戏中的一个难题,建立了相应的数学模型,给出了完善的解决方案,深化了现行的相关结果.     

自由群的直积的检验元素的注记

本文研究了自由群的直积的检验元素,通过对直积的自同态的分解,得到了直积中的元素为检验元素的充分必要条件,改进了O'neill和Turner的结果.此外,构造了两类具体的检验元素.     

Finite Volume Element Predictor-corrector Method for a Class of Nonlinear Parabolic Systems

A finite volume element predictor-corrector method for a class of nonlinear parabolic system of equations is presented and analyzed. Suboptimal L2 error estimate for the finite volume element predictor-corrector method is derived. A numerical experiment shows that the numerical results are consistent with theoretical analysis.     

Cyclically Presented Modules Over Rings of Finite Type

A ring is of finite type if it has only finitely many maximal right ideals, all two-sided. In this article, we give a complete set of invariants for finite direct sums of cyclically presented modules over a ring R of finite type. More generally, our results apply to finite direct sums of direct summands of cyclically presented right R-modules (DCP modules). Using a duality, we obtain as an application a similar set of invariants for kernels of morphisms between finite direct sums of pair-wise non-isomorphic indecomposable injective modules over an arbitrary ring. This application motivates the study of DCP modules.     

NUMERICAL SOLUTION OF THE SPACE FRACTIONAL DIFFERENTIAL EQUATION

In this paper, a space fractional differential equation is considered. The equation is obtained from the parabolic equation containing advection, diffusion and reaction terms by replacing the second order derivative in space by a fractional derivative in space of order. An implicit finite difference approximation for this equation is presented. The stability and convergence of the finite difference approximation are proved. A fractional-order method of lines is also presented. Finally, some numerical results are given.     

Node-pair finite volume/finite element schemes for the Euler equation in cylindrical and spherical coordinates

A numerical scheme is presented for the solution of the compressible Euler equations in both cylindrical and spherical coordinates. The unstructured grid solver is based on a mixed finite volume/finite element approach. Equivalence conditions linking the node-centered finite volume and the linear Lagrangian finite element scheme over unstructured grids are reported and used to devise a common framework for solving the discrete Euler equations in both the cylindrical and the spherical reference systems. Numerical simulations are presented for the explosion and implosion problems with spherical symmetry, which are solved in both the axial–radial cylindrical coordinates and the radial–azimuthal spherical coordinates. Numerical results are found to be in good agreement with one-dimensional simulations over a fine mesh.     

A wavelet-based stochastic finite element method of thin plate bending

A wavelet-based stochastic finite element method is presented for the bending analysis of thin plates. The wavelet scaling functions of spline wavelets are selected to construct the displacement interpolation functions of a rectangular thin plate element and the displacement shape functions are expressed by the spline wavelets. A new wavelet-based finite element formulation of thin plate bending is developed by using the virtual work principle. A wavelet-based stochastic finite element method that combines the proposed wavelet-based finite element method with Monte Carlo method is further formulated. With the aid of the wavelet-based stochastic finite element method, the present paper can deal with the problem of thin plate response variability resulting from the spatial variability of the material properties when it is subjected to static loads of uncertain nature. Numerical examples of thin plate bending have demonstrated that the proposed wavelet-based stochastic finite element method can achieve a high numerical accuracy and converges fast.     

A hybrid numerical model for multiphase fluid flow in a deformable porous medium

In this paper, a fully coupled finite volume-finite element model for a deforming porous medium interacting with the flow of two immiscible pore fluids is presented. The basic equations describing the system are derived based on the averaging theory. Applying the standard Galerkin finite element method to solve this system of partial differential equations does not conserve mass locally. A non-conservative method may cause some accuracy and stability problems. The control volume based finite element technique that satisfies local mass conservation of the flow equations can be an appropriate alternative. Full coupling of control volume based finite element and the standard finite element techniques to solve the multiphase flow and geomechanical equilibrium equations is the main goal of this paper. The accuracy and efficiency of the method are verified by studying several examples for which analytical or numerical solutions are available. The effect of mesh orientation is investigated by simulating a benchmark water-flooding problem. A representative example is also presented to demonstrate the capability of the model to simulate the behavior in heterogeneous porous media.     

Distance-regular graphs and (s,c, a,k)-graphs

A diameter-bound theorem for a class of distance-regular graphs which includes all those with even girth is presented. A new class of graphs, called (s, c, a, k)-graphs, is introduced, which are conjectured to contain enough of the local structure of finite distance-regular graphs for them all to be finite. It is proved that they are finite and a bound on the diameter is given in the case a ≤ c.     

The Lions domain decomposition algorithm on non-matching cell-centred finite volume meshes

A finite volume scheme for convection diffusion equations onnon-matching grids is presented. Sharp error estimates for H²solutions of the continuous problem are obtained. A finite volumeversion of an adaptation of the Schwarz algorithm due to P.L. Lions is then studied. For a fixed mesh, its convergencetowards the finite volume scheme on the whole domain is proven.Numerical experiments are performed to illustrate the theoreticalrate of convergence of the finite volume sequences of solutionsas the mesh is refined, together with the speed of convergenceof the Schwarz algorithm.