Determination of Lead(II), Copper(II), Zinc(II), Cobalt(II), Cadmium(II), Iron(III), Mercury(II) using sequential injection extractions

Sequential injection analysis is still dominated by single component analysis. In this proposed robust, economical simple instrumental system seven different metal ions are determined simultaneously using thin-film sequential injection extraction (SIE) with multivariate calibration and multiwavelength detection. Dithizone, in ethanol, is used as extractant and the metal dithizonates’ spectra are generated by a diode array spectrophotometer between 300 and 700 nm. The SI thin-film extraction using water miscible with ethanol works due to the hydrophobic interaction of ethanol with the Teflon wall to create a thin film. A sample frequency of 27 samples per hour was obtained with a sample carry-over of less than 1%. The results of the proposed sequential injection extraction system compare favourably with the results obtained by using standard atomic absorption spectrometry (AAS) methods on conventional extraction samples.     

Formation of Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Ag(I) and Cd(II) hexacyanocobaltates

A study is reported of the formation of Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Ag(I) and Cd(II) hexacyanocobaltates. The results show that the precipitates form by reaction of the metal ions with KCo(CN)(6)(2-) ion-pairs in 1:1 ratio, followed by solid phase transformations.     

Adsorption of Pb(II), Cu(II), Cd(II), Zn(II), Ni(II), Fe(II), and As(V) on bacterially produced metal sulfides

The adsorption of Pb(II), Cu(II), Cd(II), Zn(II), Ni(II), Fe(II) and As(V) onto bacterially produced metal sulfide (BPMS) material was investigated using a batch equilibrium method. It was found that the sulfide material had adsorptive properties comparable with those of other adsorbents with respect to the specific uptake of a range of metals and, the levels to which dissolved metal concentrations in solution can be reduced. The percentage of adsorption increased with increasing pH and adsorbent dose, but decreased with increasing initial dissolved metal concentration. The pH of the solution was the most important parameter controlling adsorption of Cd(II), Cu(II), Fe(II), Ni(II), Pb(II), Zn(II), and As(V) by BPMS. The adsorption data were successfully modeled using the Langmuir adsorption isotherm. Desorption experiments showed that the reversibility of adsorption was low, suggesting high-affinity adsorption governed by chemisorption. The mechanism of adsorption for the divalent metals was thought to be the formation of strong, inner-sphere complexes involving surface hydroxyl groups. However, the mechanism for the adsorption of As(V) by BPMS appears to be distinct from that of surface hydroxyl exchange. These results have important implications to the management of metal sulfide sludge produced by bacterial sulfate reduction.     

Synthesis and chemical characterization of biologically important complexes of vanillin thiosemicarbazone with manganese(II), iron(II), cobalt(II), nickel(II), copper(II), zinc(II), cadmium(II), and mercury(II)

Summary Vanillin thiosemicarbazone (VTSC) has been used to isolate the complexes of the types [M(VTSC)₂(H₂O)₂]X₂ (M=Mn^II, Fe^II, Co^II, or Ni^II and X=Cl) and [M(VTSC)X₂]H₂O (M=Cu^II, Zn^II, Cd^II or Hg^II and X=Cl). Probable structures of these complexes are suggested on the basis of elemental analysis, molar conductance, magnetic moment and electronic and i.r. spectral data. The fungicidal activity of VTSC and the isolated complexes has been evaluated on pathogenic fungi,Alternaria (Sp.),Paecilomyces (Sp.) andPestalotia (Sp.).On leave from the University of Myosore.     

Organic acid solutions in the chromatography of inorganic ions. VII. Cation exchange of Mg(II), Ca(II), Sr(II), Ba(II), Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II) and Fe(III) in succinate media

Summary The cation-exchange behaviour of Mg(II), Ca(II), Sr(II), Ba(II), Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II) and Fe(III) in succinate media at various concentrations and pH, was studied with Dowex 50 WX8 resin (200–400 mesh) in the NH ₄ ⁺ form. As examples separations of Cd(II)/Co(II), Cd (II)/Ni(II), Fe(III)/Cu(II)/Ni(II) and Mg(II)/Ca(II)/Sr(II)/Ba(II) have been achieved.This work was supported by C.N.R. of Italy.     

Complexation of managanese(II), cobalt(II), nickel(II), zink(II), and cadmium(II) cations with amoxicillin

The interaction of amoxicillin anions (Axn^?) with Mn²⁺, Co²⁺, Ni²⁺, Zn²⁺, and Cd²⁺ in aqueous solution at 20°C and an ionic strength of 0.1 (KNO₃) has been studied pH-metrically. In a neutral and weak alkaline solution, MAxn⁺ and M(OH)Axn complexes are formed. The formation constants and the pH ranges of existence of these complexes have been determined.     

N-benzamidosalicylaldimine complexes of copper(II), nickel(II), cobalt(II), iron(II), manganese(II), oxyvanadium(IV) and oxytitanium(IV)

Summary N-benzamidosalicylaldimine (H₂L) complexes of Cu^II, Ni^II, Co^II, Fe^II, Mn^II. VO_IV and TiO_IV have been prepared. The ligand probably coordinates to the metal from the hydroxyl, carbonyl and imino groups.     

Reaction of cefalexine with manganese(II), cobalt(II), nickel(II), zinc(II), and cadmium(II) ions

The reaction of cefalexine anions (Cpx^?) with Mn²⁺, Co²⁺, Ni²⁺, Zn²⁺, and Cd²⁺ ions in aqueous solution at 20°C and ionic strength 0.1 was studied by pH-metry. In weakly alkaline medium, unstable complexes MCpx⁺ and M(OH)Cpx are formed, in which Cpx^? behaves as a monodentate lidand coordinated through the amino group.     

Chelated complexes of cadmium(II), cobalt(II), copper(II), mercury(II), nickel(II), uranyl(II) and zinc(II) with benzil bis(4-phenylthiosemicarbazone)

Summary Complexes of Co^II, Ni^II, Cu^II, Zn^II, Cd^II, Hg^II and UO ₂ ^II with benzil bis(4-phenylthiosemicarbazone), H₂BPT, have been synthesized and their structures assigned based on elemental analysis, molar conductivity, magnetic susceptibility and spectroscopic measurements. The i.r. spectra suggest that the ligand behaves as a binegative quadridentate (NSSN) (Co^II, Cu^II, Hg^II and UO ₂ ^II complexes) or as a binegative quadridentate-neutral bidentate chelating agent (Ni^II, Zn^II and Cd^II complexes). Octahedral structures for the Co^II and Ni^II complexes and square-planar structure for the Cu^II complex are suggested on the basis of magnetic and spectral evidence. The crystal field parameters (Dq, B and _B) for the Co^II complex are calculated and agree fairly well with the values reported for known octahedral complexes. The ligand can be used for the microdetermination of Ni^II ions of concentration in the 0.4–6×10^–4 mol l^–1 range and the apparent formation constant for the species generated in solution has also been calculated.     

Complexation of copper(II), nickel(II), cobalt(II), zinc(II), and manganese(II) chlorides with acylated polyethylenepolyamines

Complexation of some non-ferrous metals with acylated polyethylenepolyamines in 90% aqueous ethanol has been studied by pH-metric titration and visible absorption spectroscopy. The composition and stability constants of complexes have been determined.     

Complexes of cobalt(II), nickel(II), copper(II), cadmium(II), and mercury(II) with tetradentate Schiff base ligands

Summary A series of metal complexes with three new tetradentate Schiff bases derived from benzoin and benzil withc-toluidine and benzil with diaminoethane have been prepared and characterised by physical and chemical methods. The modes of bonding of the ligands with the metal ions have been proposed. Electronic spectra and room temperature magnetic moment values suggest octahedral geometry for the Co^II and Ni^II complexes, whereas the Hg^II and Cd^II complexes have tetrahedral geometry. The Cu^II complexes are square planar. Apart from the complexes of the Schiff bases derived from benzoin, all the other complexes have high molar conductance values suggesting them to be electrolytes. The complexes have been screened against some fungal pathogens.     

Zinc(II), cadmium(II), mercury(II), and ethylmercury(II) complexes of phosphinothiol ligands

Neutral zinc, cadmium, mercury(II), and ethylmercury(II) complexes of a series of phosphinothiol ligands, PhnP(C6H3(SH-2)(R-3))3-n (n = 1, 2; R = H, SiMe3) have been synthesized and characterized by IR and NMR ((1)H, (13)C, and (31)P) spectroscopy, FAB mass spectrometry, and X-ray structural analysis. The compounds [Zn{PhP(C6H4S-2)2}] (1) and [Cd{Ph2PC6H4S-2}2] (2) have been synthesized by electrochemical oxidation of anodic metal (zinc or cadmium) in an acetonitrile solution of the appropriate ligand. The presence of pyridine in the electrolytic cell affords the mixed complexes [Zn{PhP(C6H4S-2)2}(py)] (3) and [Cd{PhP(C6H4S-2)2}(py)] (4). [Hg{Ph2PC6H4S-2}2] (5) and [Hg{Ph2PC6H3(S-2)(SiMe3-3)}2] (6) were obtained by the addition of the appropriate ligand to a solution of mercury(II) acetate in methanol in the presence of triethylamine. [EtHg{Ph2PC6H4S-2}] (7), [EtHg{Ph2P(O)C6H3(S-2)(SiMe3-3)}] (8), [{EtHg}2{PhP(C6H4S-2)2}] (9), and [{EtHg}2{PhP(C6H3(S-2)(SiMe3-3))2}] (10) were obtained by reaction of ethylmercury(II) chloride with the corresponding ligand in methanol. In addition, in the reactions of EtHgCl with Ph2PC6H4SH-2 and with the potentially tridentate ligand PhP(C6H3(SH-2)(SiMe3-3)) 2, cleavage of the Hg-C bond was observed with the formation of [Hg{Ph2PC6H4S-2}2] (5) and [Hg(EtHg) 2{PhP(O)(C6H3(S-2)(SiMe3-3))2}2] (11), respectively, and the corresponding hydrocarbon. The crystal structures of [Zn3{PhP(C6H4S-2)2}2{PhP(O)(C6H4S-2)2}] (1*), [Cd2{Ph2PC6H4S-2}3{Ph2P(O)C6H4S-2}] (2*), 3, 5, 6, [EtHg{Ph2P(O)C6H4S-2}] (7*), 8, 9, [{EtHg}2{PhP(O)(C6H3(S-2)(SiMe3-3))2}] (10*), and 11 are discussed. The molecular structures of 1, 2, 4, 7, and 10 have also been studied by means of density functional theory (DFT) calculations.     

Thermal decompositions of formates. Part IV. Thermal dehydrations of Mg(II), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) formate dihydrates

The thermal dehydrations of formate dihydrates of Mg(II), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) were studied by means of thermogravimetry, differential thermal analysis and differential scanning calorimetry in air.The reaction orders of dehydration obtained by the dynamic and the static methods were found to be 2/3 for all the salts examined, which indicated that the rate of dehydration was controlled by a chemical process at a phase boundary. This was confirmed by microscopic observation.The values of activation energy, frequency factor and the enthalpy change of dehydration for all salts examined, were 21–30 kcal mole^?1, 10¹⁰-10¹² sec^?1 and 28–31 kcal mole^?1, respectively.The temperature at which the dehydration occurred was regarded as a measure of the strength of the metalOH₂ bond, and this temperature increased with increasing the reciprocal of the radius of the metallic ion.     

Modelling the adsorption of Cd(II), Cu(II), Ni(II), Pb(II), and Zn(II) onto Fithian illite

Illite samples from Fithian, IL were purified and saturated with Na(+) ions. The acid-base surface chemistry of the Na-saturated illite was studied by potentiometric titration experiments with 0.1, 0.01, and 0.001 M NaNO(3) solutions as the background electrolyte. Results showed that the titration curves obtained at different ionic strengths did not intersect in the studied pH range. The adsorption of Cd(II), Cu(II), Ni(II), Pb(II), and Zn(II) onto illite was investigated as a function of pH and ionic strength by batch adsorption experiments. Two distinct mechanisms of metal adsorption were found from the experimental results: nonspecific ion-exchange reactions at lower pH values on the basal surfaces and 'frayed edges' and specific adsorption at higher pH values on the mineral edges. Ionic strength had a greater effect on the ion-exchange reactions. The binding constants for the five heavy metals onto illite were determined using the least-square fitting computer program FITEQL. Linear free energy relationships were found between the surface binding constants and the first hydrolysis constants of the metals.     

New Complexes of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) with 3,3-dimethylglutaric Acid

Conditions for the preparation of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II)3,3-dimethylglutarates were investigated and their quantitative composition, solubility in water at 293 K and magnetic moments were determined. IR spectra and powder diffraction patterns of the complexes prepared with general formula MC₇H₁₀O₄⋅nH₂O (n=0−2) were recorded and their thermal decomposition in air were studied. During heating the hydrated complexes of Mn(II),Co(II), Ni(II) and Cu(II) are dehydrated in one step and next all the anhydrous complexes decompose to oxides directly (Mn, Co, Zn) or with intermediate formation free metal (Ni,Cu) or oxocarbonates (Cd). The carboxylate groups in the complexes studied are bidentate. The magnetic moments for the paramagnetic complexes of Mn(II), Co(II), Ni(II) and Cu(II)attain values 5.62, 5.25, 2.91 and 1.41 M.B., respectively. This revised version was published online in August 2006 with corrections to the Cover Date.     

On the character and products of the thermal decomposition of Mn(II), Fe(II), Co(II), Ni(II), Cu(II), and Zn(II) formates

The character and products of the thermal decomposition of metal formate dihydrates of Mn-Zn series were studied in carbon dioxide atmosphere under different pressures.     

Synthesis and structural studies of 2-acetylthiophene-2-thenoylhydrazone complexes of oxovanadium(IV), manganese(II), cobalt(II), nickel(II), copper(II), zinc(II), cadmium(II) and mercury(II)

Complexes with chemical compositions VO(Hatth)₂SO₄, VO(Hatth)₂SO₄·py, [M(Hatth)₂Cl·H₂O]Cl [M = Mn(II), Co(II) and Ni(II)], [Cu(Hatth)₂Cl]₂Cl₂, [Cu(Hatth)₂· Cl·py]Cl, [Cd(Hatth)₂Cl]Cl, M(Hatth)₂Cl₂ [M = Zn(II) and Hg(II)], VO(atth)₂, VO(atth)₂py, M(atth)₂(py)₂ [M = Mn(II) and Cu(II)], M(atth)₂(H₂O)₂ [M = Mn(II), Co(II), Ni(II), Cu(II) and Zn(II)], Hatth = 2-acetylthiophene-2-thenoylhydrazone, and atth, its deprotonated form, have been prepared and characterized by analytical data, molar conductance, magnetic susceptibility, electronic and photoacoustic, ESR, IR and NMR spectral studies. X-ray diffraction study has been used to determine the shape and the dimensions of the unit lattice of copper(II) complexes.     

Preparation and characterization of vanillin thiosemicarbazone complexes with Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II)

Complexes of vanillin thiosemicarbazone (3-methoxy-4-hydroxybenzaldehyde thiosemicarbazone), (vtsch) with several divalent metal ions have been isolated. Structures have been assigned to these complexes based on electrical conductivity, magnetic susceptibility and spectroscopic measurements     

Synthesis of norfloxacin compounds with cobalt(II), zinc(II), cadmium(II), and mercury(II)

New compounds of norfloxacin (nfH, C₁₆H₁₈FN₃O₃) with cobalt(II), zinc(II), cadmium(II), and mercury(II) synthesized have the following compositions: Co(nfH-O,O’)₂(H₂O)₂](NO₃)₂, (nfH₂)₂CdCl₄ · 2H₂O, (nfH₂)₂ZnCl₄ · 2H₂O, (nfH₂)₂HgCl₄ · 2H₂O, and (nfH₃)HgCl₄. Their crystallographic parameters were determined. The first listed compound is isostructural to the known zinc analogue. Norfloxacin coordination modes in these complexes are considered.     

Complexes of dicamba with cadmium(II), copper(II), mercury(II), lead(II) and zinc(II)

New solid complexes of a herbicide known as dicamba (3,6-dichloro-2-methoxybenzoic acid) with Pb(II), Cd(II), Cu(II) and Hg(II) of the general formula M(dicamba)₂·xH₂O (M=metal, x=0-2) and Zn₂(OH)(dicamba)₃·2H₂O have been prepared and studied. The complexes have different crystal structures. The carboxylate groups in the lead, cadmium and copper complexes are bidentate, chelating, symmetrical, in Hg(dicamba)₂·2H₂O - unidentate, and in the zinc salt - bidentate, bridging, symmetrical. The anhydrous compounds decompose in three stages, except for the lead salt whose decomposition proceeds in four stages. The main gaseous decomposition products are CO₂, CH₃OH, HCl and H₂O. Trace amounts of compounds containing an aromatic ring were also detected. The final solid decomposition products are oxychlorides of metals and CuO. This revised version was published online in July 2006 with corrections to the Cover Date.