Electrochemical reduction of cefminox at the mercury electrode and its voltammetric determination in urine

The electrochemical behaviour of cefminox in phosphate buffers solutions over pH range 2.0-9.0 using differential-pulse polarography, DC-tast polarography, cyclic voltammetry and linear sweep voltammetry (staircase) has been studied. In acidic media, a non reversible diffusion-controlled reduction involving two electrons occurs and the mechanism for the reduction was suggested. A differential-pulse polarographic method for the determination of cefminox in the concentration range 5.8×10⁻⁶-6.0×10⁻⁵ M with a detection limit of 1.76×10⁻⁶ M was proposed. Also, a method based on controlled adsorptive pre-concentration of cefminox on the hanging mercury drop electrode followed by linear sweep voltammetry, allows its determination in the concentration range 8.3×10⁻⁸-1.5×10⁻⁶ M with a detection limit of 2.47×10⁻⁸ M. These methods have been used for the direct determination of cefminox in human urine with recoveries between 98 and 103%, and precision around ±2%.     

Voltammetric Determination of Nitronaphthalenes at a Silver Solid Amalgam Electrode

Abstract

Electrodes based on amalgam materials were re-introduced in electroanalytical chemistry in the year 2000, partially as reaction to unsubstantiated public fears of liquid mercury. In this publication, the voltammetric behavior of 1-nitronaphthalene and 2-nitronaphthalene was investigated at a mercury meniscus-modified silver solid amalgam electrode. The reduction mechanism in mixed neutral buffer-methanol medium includes the four-electron reduction to hydroxylaminoderivative followed by a two-electron reduction to the amine in acidic medium, similarly to mercury electrodes. In alkaline media, both compounds show the splitting of the main four-electron reduction peak typical for mercury electrodes in two new ones, the first one corresponding to a one electron reduction of the nitroderivative to the nitro radical anion, which was confirmed by microcoulometry. Using optimized conditions (differential pulse voltammetry, Britton-Robinson buffer pH 7.0 – methanol (9:1) medium) the calibration dependences are linear in the range of 2·10^?7 (4·10^?7) to 1·10^?4 mol L^?1 for 1-nitronaphthalene (2-nitronaphthalene). After preconcentration of the analytes from drinking and river water samples using solid phase extraction the limit of determination was lowered to ～3·10^?8 mol L^?1.     

Electrochemical study and analytical applications for new biologically active 2-nitrophenylbenzimidazole derivatives

The present study addresses the electrochemical behavior and the analytical applications of six 2-nitrophenylbenzimidazole derivatives with activity against Trypanosoma cruzi. When studied in a wide range of pH, by differential pulse polarography, tast polarography and cyclic voltammetry, these compounds exhibited two irreversible cathodic responses. With analytical purposes, the differential pulse polarography mode was selected, which exhibited adequate analytical parameters of repeatability, reproducibility and selectivity. The percentage of recovery was in all cases over 99%, and the detection and quantitation limits were at the level of 1 × 10⁻⁷ mol L⁻¹ and 1 × 10⁻⁶ mol L⁻¹, respectively. In addition, the differential pulse polarography method was successfully applied to study the hydrolytic degradation kinetic of one of the tested compounds. Activation energy, kinetic rate constants at different temperatures and half-life values of such application are reported.     

Electrochemical behavior of dopamine at a quercetin-SAM-modified gold electrode and analytical application

A stable quercetin–thioglycolic acid-modified gold electrode (Qu–TCA/Au) was prepared as a self-assembled monolayer (SAM) and its electrochemical behavior was investigated by electrochemical methods. In 0.05-M phosphate buffer solution (pH 7.0) quercetin exhibits quasi-reversible signals at the Qu–TCA/Au electrode. The stability of the quercetin-modified gold electrode is very good. The quercetin self-assembled monolayer is an effective mediator for the oxidation of dopamine, which was investigated by cyclic voltammetry and differential pulse voltammetry. Ascorbic acid does not interfere with determination of dopamine at an electrode modified with a mixture of quercetin–thioglycolic acid and quercetin–11-mercaptoundecanoic acid. This modification allows dopamine to be determined in the presence of ascorbic acid in the range from 3×10^–5 to 3×10^–4 M. The detection limit is 1×10^–6 M. Scanning electrochemical microscopy (SECM) was employed to study the electrochemical performances of the modified gold electrode indicating different feedback modes at differently modified surfaces.     

Voltametric,Amperometric, and Chronopotentiometric Determination of Submicromolar Concentrations of Carboxin

New procedures for the determination of pesticide carboxin were developed using differential pulse voltammetry, HPLC with amperometric detection and chronopotentiometry at carbon paste electrode and reticulated vitreous carbon electrode, respectively. Developed procedures based on electrochemical oxidation of carboxin were successfully applied on the determination of carboxin in the model samples of drinking and river water. Limits of detection in samples of river water were in 10^?7 mol L^?1 concentration range for all procedures and electrodes used. All developed procedures proved to be sensitive, accurate and, due to the resistance of the electrode to the passivation, also simple to handle.     

Determination of Methimazole and Carbimazole Using Polarography and Voltammetry

Abstract

Anodic waves of methimazole (I) (1-methylimidazole-2-thiol) and carbimazole (II) (1-ethoxycarbonyl-3-methyl-2-thio-4-imidazoline) on mercury electrodes correspond to mercury salt formation. Both compounds form in the thiono form a soluble complex at pH < 6, compound (I) at higher pH-values a slightly soluble salt of the thiol form. Electrode processes involving the thiol form are complicated by adsorption. Oxidation at solid electrodes occurs only at potentials more than 0.5 V more positive. For compound (I) spectrophotometry indicated pK_a=12.0 ± 0.2. By d.c. polarography in 0.1 M H₂SO₄ containing 10% ethanol the determination of both compounds is possible between 4 × 10^? and 1 × 10^?3 M, by differential pulse polarography between 1 × 10^? and 1 × 10^?4 M, by differential pulse voltammetry at HMDE between 5 × l0^?7 and 6 × 10^? M.     

Electrochemical studies of berberine and jatrorubine by pulse polarography

The application of pulse polarography (PP) and differential pulse polarography (DPP) for the quantitative determination of berberine and Jatrorubine in aqueous, acidic solutions was investigated. The proposed methods could be successfully applied in the concentration range between 5·10^–7 (DPP) or 1·10^–6 (PP) and 5·10^–5 mol/dm³ of alkaloids.     

Simple,Rapid and Sensitive Electrochemical Method for the Determination of the Triketone Herbicide Sulcotrione in River Water Using a Glassy Carbon Electrode

We report a novel, simple, rapid and sensitive electrochemical method for the determination of sulcotrione, a member of the relatively new class of triketone herbicides, using differential pulse voltammetry on a glassy carbon electrode. Its electrochemical behavior including influences of electrolyte composition, pH and scan rate was studied to select optimal experimental parameters for its determination. In Britton? Robinson buffer at pH 3 sulcotrione provided a well‐defined reduction peak at ?0.84 V (vs. Ag/AgCl electrode), with good repeatability (relative standard deviation of 2.3 % for 8 measurements at 10 µM concentration level). With optimized parameters differential pulse voltammetry rendered two linear concentration ranges from 0.2 to 2 µM and from 2 to 50 µM with a detection limit of 0.05 µM. The proposed procedure was successfully applied to the determination of sulcotrione in spiked river water samples with satisfactory recoveries (93–109 %). The developed method may represent a simple, rapid and sensitive alternative to highly toxic mercury electrodes and chromatographic methods.     

Simultaneous determination of ferric, ferrous and total iron by extraction differential pulse polarography: application to the speciation of iron in rocks

The voltammetric characteristics of Fe(III) oxinate at a mercury electrode, in the presence of 0.2 M tributylammonium perchlorate (tri-BAP) and 0.2 M tributylamine (tri-BA) as the supporting electrolyte have been studied in chloroform. With this supporting electrolyte a two electron quasi-reversible process for the reduction of Fe(III) oxinate was observed. Preceded by a solvent extraction of Fe(III) oxinate in chloroform, differential pulse polarography (DP) was used for the determination of iron. The calibration graph was linear over the concentration range 0.5–50 μM Fe(III) oxinate in chloroform and the detection limit was 1.5 μM. The proposed DP method has been used for the determination of ferric, ferrous and total iron in a mixture and successfully applied to the speciation of iron in rocks.     

Adsorptive stripping voltammetric determination of 1-(4′-bromophenyl)-3,3-dimethyltriazene

The optimum conditions were established for the determination of the genotoxic substance 1-(4-bromophenyl)-3,3-dimethyltriazene by differential-pulse voltammetry at a hanging mercury drop electrode in the concentration range 1 × 10^–4 to 1 × 10^–7 mol dm^–3. The sensitivity of the determination can be improved through adsorptive accumulation of the investigated substance on the surface of the hanging mercury drop electrode: differential pulse adsorptive stripping voltammetry can be used in the concentration range 1 × 10^–7 to 2 × 10^–10 mol dm^–3. The relative standard deviation (for ten determinations at 2 × 10^–10 mol dm^–3) was 7.5%.     

Voltammetric determination of aminobiphenyls at a boron-doped nanocrystalline diamond film electrode

Voltammetric behavior of 2-aminobiphenyl, 3-aminobiphenyl, and 4-aminobiphenyl at a boron-doped nanocrystalline diamond film electrode was investigated using cyclic voltammetry and differential pulse voltammetry. Optimum conditions have been found for the determination of those genotoxic substances by differential pulse voltammetry at the above given electrode in the concentration range of 2 × 10⁻⁷ to 1 × 10⁻⁵ mol/L.     

Determination of propazine by differential pulse polarography in micellar and emulsified media

An electroanalytical study of the herbicide propazine's reduction process in micellar solutions and oil-in-water emulsions is reported. The anionic surfactant sodium pentanesulphonate was chosen as the most suitable. The differential pulse polarograms of micellar solutions had two reduction peaks below pH 2.0, whereas only one peak was obtained above pH 2.O. Ethyl acetate was chosen as the organic solvent to form propazine emulsions. Unlike in micellar solutions, the DPP polarograms of propazine emulsions showed only one peak even at pH < 2.0, suggesting that propazine hydrolysis was hindered in the emulsified medium. The limiting current is diffusion-controlled and the electrode process is irreversible. Propazine can be determined by differential pulse polarography over the 1.0 × 10^–1 – 1.0 × 10^–1moll^–1 and 1.0 × 10^–15 – 4.0 × 10^–1 moll^–1 concentration ranges and the limit of detection was 2.8 × 10^–1 moll^–1. Of the potential interferents simazine, methoprotryne and terbutryn (alls-triazines), thiram (a dithiocarbamate), dinoseb (nitrophenolic), and heptachlor (chlorinated cyclo-diene herbicide), only the first two were significant (10% error for equimolar concentrations). The method was applied to the determination of propazine in spiked drinking water. At a concentration level of 2.0 × 10^–1 moll^–1 a recovery of 94 ± 6% was obtained, after tenfold concentration on Sep-Pak.     

Polarographic behaviour of 2-benzilidenimino-benzohydroxamic acid (2-BIBH) and 2-BIBH-Mo(VI) system

The polarographic behaviour of 2-benzilideniminobenzohydroxamic acid (2-BIBH) solutions and of 2-BIBH solutions in the presence of Mo(VI) have been studied by using differential pulse polarography and cyclic voltammetry. The polarographic characteristics of the resulting waves have been studied and possible mechanisms of the processes involved have been proposed. A linear relationship has been observed betweenI _p and Mo(VI) concentration in the range 2×10^–6 to 1.6×10^–5 M when using 3×10^–4 M 2-BIBH. Standard deviations of 5.6×10^–8 and 1.2×10^–8 M were found for 3×10^–6 and 8 × 10^–6 M Mo(VI), respectively.     

Voltammetric behaviour and determination of moxifloxacin in pharmaceutical products and human plasma

The oxidative behaviour of moxifloxacin was studied at a glassy carbon electrode in different buffer systems using cyclic, differential pulse, and Osteryoung square-wave voltammetry. The oxidation process was shown to be irreversible over the entire pH range studied (2.0–10.0) and was diffusion-controlled. The methods were performed in Britton–Robinson buffer and the corresponding calibration graphs were constructed and statistical data were evaluated. When the proposed methods were applied at pH 6.0 linearity was achieved from 4.4×10^–7 to 1.0×10^–5 mol L^–1. Applicability to tablets and human plasma analysis was illustrated. Furthermore, a high-performance liquid chromatographic method with diode-array detection was developed. A calibration graph was established from 4.0×10^–6 to 5.0×10^–5 mol L^–1 moxifloxacin. The described methods were successfully employed with high precision and accuracy for estimation of the total drug content of human plasma and for pharmaceutical dosage forms of moxifloxacin.     

Differential Pulse and Cathodic Stripping Voltammetric Methods for the Determination of Aromatic Sulfones

Abstract

A cathodic stripping voltammetric method for the determination of aromatic sulfones was developed. The technique involved a conversion of the sulfone to a sulfinate by controlled potential electrolysis at a mercury pool electrode and a subsequent determination of the sulfinate by cathodic stripping at a silver electrode. The detection limit was 2 × 10^?7 M sulfone in 4:1 DMSO-H₂O.

The differential pulse polarographic method utilized direct reduction of the sulfone in a 3:2 DMSO-benzene solvent. Although the detection limit (4.6 × 10^?7 M) was higher than in the stripping method, the linear dynamic range was greater (500 vs. 25), the typical precision was better (0.5 v. 7% relative standard deviation) and the determinations were more rapid (20 vs. 90 min). In addition, fewer interferences are anticipated for the pulse polarography method.     

Imprinted Polymer – Modified Hanging Mercury Drop Electrode for Differential Pulse Adsorptive Stripping Voltammetric Analysis of a Diquat Herbicide

An imprinted polymer modified hanging mercury drop electrode (HMDE) in Model 303A system in conjunction with a PAR Model 264A Polarographic Analyzer/Stripping Voltammeter has been used for the selective analysis of a diquat herbicide viz., 5,6‐dihydropyrazino[1,2,3,4‐[lmn]‐1,10‐phenanthrolinium dichlorides in differential pulse cathodic stripping voltammetry mode. Complex aqueous samples (drinking water and agricultural soil suspension), spiked with a diquat herbicide, were directly analyzed by the adsorptive accumulation of the analyte over the working electrode (accumulation potential ?0.8 V (vs. Ag/AgCl), accumulation time 120 s, pH 7.0, supporting electrolyte 0.1 M KCl, scan rate 10 mV s^?1, pulse amplitude 25 mV). The limit of detection for diquat herbicide was found to be 0.34 nmol L^?1 (0.1 ppb, RSD 2%, S/N=2).     

Determination of Nifedipine by Differential Pulse Adsorptive Stripping Polarography

The optimum conditions for sample preparation and electrolysis in detecting the electrochemical peak of nifedipine reduction were found. A procedure for determining 10^–9 to 5 × 10^–7 M of this preparation by differential pulse stripping polarography at a stationary mercury electrode using accumulation for 5 min was proposed.     

Urea as new stabilizing agent for imipenem determination: electrochemical study and determination of imipenem and its primary metabolite in human urine

Imipenem shows a fast chemical conversion to a more stable imin form (identical to that of biochemical dehydropeptidase degradation) in aqueous solutions and stabilizing agents used avoid its electrochemical study and determination.The aim of this work is the proposal of urea as stabilizing agent which allows the electrochemical study of imipenem and the proposal of electrochemical methods for the determination of imipenem and its primary metabolite (M1) in human urine samples. Electrochemical studies were realized in phosphate buffer solutions over pH range 1.5-8.0 using differential-pulse polarography, DC-tast polarography, cyclic voltammetry and adsorptive stripping voltammetry. In acidic media, a non-reversible diffusion-controlled reduction involving a two steps mechanism which involves one electron and one proton in the first step and two electrons and two protons in the second step occurs and the mechanism for the reduction was suggested.A differential-pulse polarographic method for the determination of imipenem in the concentration range 3.2 × 10⁻⁶ to 2 × 10⁻⁵ M (0.95-3.4 mg/L) and its primary metabolite in the concentration range 1.4 × 10⁻⁶ to 10⁻⁴ M (0.43-26.1 mg/L) with detection limits of 9.6 × 10⁻⁷ M (0.28 μg/L imipenem) and 4.3 × 10⁻⁷ M (0.14 μg/L M1) was proposed. Also, a method based on controlled adsorptive pre-concentration of imipenem on the hanging mercury drop electrode followed by voltammetric measure, allows imipenem determination in the concentration range 1.8 × 10⁻⁸ to 1.2 × 10⁻⁶ M (5.42-347 μg/L) with a detection limit of 5.4 × 10⁻⁹ M (1.63 μg/L). The proposed methods have been used for the direct determination of the analytes in a pharmaceutical formulation and human urine.     

Hemin Modified Carbon Fat Electrode for Analyzing Antimalarial Endoperoxide Artemisinin in Artemisia annua

A hemin bulk modified carbon electrode with Adeps neutralis (solid fat) as binder was developed for the determination of antimalarial endoperoxide artemisinin in plant matrix. The hemin modified electrode showed significant catalytic activity for the electrochemical reduction of artemisinin at about ?380 mV vs. Ag/AgCl in phosphate buffer solution of pH 7 by using cyclic and differential pulse voltammetry. Under optimized conditions strict linearity between artemisinin concentration and height of the cathodic catalytic current peak was observed in 4.8×10^?6–7.8×10^?5 M concentration range (R=0.9991) when using differential pulse voltammetry. The detection limit was calculated as 1.4×10^?6 M of artemisinin. The developed electroanalytical device is suitable for the determination of artemisinin in Artemisia annua extracts.     

An electroanalytical study of the anticancer drug dacarbazine

The electrochemical behaviour of dacarbazine [5-(3,3-dimethyl-1-triazenyl) imidazole-4-carboxamide; DTIC] was investigated by Tast and differential pulse polarography (d.p.p.) at the dropping mercury electrode, by cyclic and differential pulse voltammetry at the hanging mercury drop electrode and by anodic voltammetry at the glassy carbon electrode. Calibration graphs were obtained for 2×10^?8?2×10^?5 M DTIC by d.p.p., for 5×10^?9?1×10^?5 M by adsorptive stripping voltammetry ar a hanging mercury drop electrode, and for 1?10×10^?5 M by high-performance liquid chromatography with oxidative amperometric detection at a glassy carbon electrode. The methods are compared and applied to determine DTIC added to blood serum after a simple clean-up procedure.