Bioreducible micelles and hydrogels with tunable properties from multi-armed biodegradable copolymers

Multi-armed biodegradable block copolymers with a bioreducible core mPCL-b-PEO were for the first time synthesized by thiol-yne click chemistry. They self-assembled into bioreducible micelles and hydrogels in aqueous solution, which demonstrated tunable size, mechanical and drug-release properties.     

Solid solution of transition metal-dicarboxylates with tunable magnetic properties

Single crystals of inorganic–organic hybrid compounds, M₅(OH)₂[CO₂(CH₂)₂CO₂]₄ [M = Mn(Mn-s), Fe(Fe-s), Co(Co-s), Mn/Fe(Mn---Fe-n) and Mn/Co(Mn---Co-n)] were prepared under hydrothermal condition at 180 °C from a mixture of transition metal(II) chlorides, succinic acid, potassium hydroxide, and water. Crystal structure of all compounds present the same structural type in the single-crystal X-ray diffraction refinements and X-ray powder diffraction analysis. The single crystal structural analyses for three homo-metallic compounds were performed and the prepared compounds have divalent metal ions on the basis of bond valence sum calculations. The unit cell constants for the hetero-metallic compounds, e.g., Mn/Fe, Mn/Co solid solutions were determined. Magnetic measurements show that the Mn-s may have antiferromagnetic interaction at low temperature. The Fe-s and the Co-s compounds have ferrimagnetic coupling below 10 K. The Mn---Co-n compounds show the ferromagnetic magnetic behavior while the Mn---Fe-n compounds present antiferromagnetic ordering.     

Thermo‐ and pH‐sensitive triblock copolymers with tunable hydrophilic/hydrophobic properties

Polymers consisting of poly(acrylic acid) (PAA) and statistical poly[(acrylic acid)‐co‐(tert‐butylacrylate)] (P(AA‐co‐tBA)), attached to both extremities of Jeffamine® (D series based on a poly(propylene oxide) (PPO) with one amine function at each end) using atom transfer radical polymerization (ATRP) are presented in this article. An original bifunctional amide‐based macroinitiator was first elaborated from Jeffamine®. tBA polymerization was subsequently initiated from this macroinitiator. This polymerization occurs in a well‐controlled manner leading to narrow molecular weights distribution. Amphiphilic copolymers were finally obtained after complete or partial hydrolysis of the PtBA blocks into PAA. The control of the partial hydrolysis of tBA units, conducted in a concentrated HCl/tetrahydrofuran mixture, is demonstrated. The properties of the triblock copolymers were preliminary investigated in aqueous solution by absorbance, DLS measurements and SEC/MALS/DV/DRI analysis as a function of temperature and pH modifications, providing evidences of thermo‐ and pH‐sensitive self‐assembly of the copolymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2606–2616     

Urea-bearing copolymers for guest-dependent tunable self-assembly

RAFT polymerization was used to synthesize urea-bearing methyl methacrylate copolymers for binding carboxylate isosteres.     

Functionalization of magnetic nanoparticles with dendritic-linear-brush-like triblock copolymers and their drug release properties

Novel water-soluble dendritic-linear-brush-like triblock copolymer polyamidoamine-b-poly(2-(dimethylamino)ethyl methacrylate)-b-poly(poly(ethylene glycol) methyl ether methacrylate) (PAMAM-b-PDMAEMA-b-PPEGMA)-grafted superparamagnetic iron oxide nanoparticles (SPIONs) were successfully prepared via a two-step copper-mediated atom transfer radical polymerization (ATRP) method. The macroinitiators were immobilized on the surface of Fe(3)O(4) nanoparticles via effective ligand exchange of oleic acid with the propargyl focal point PAMAM-typed dendron (generation 2.0, denoted as propargyl-D(2.0)) containing four carboxyl acid end groups, following a click reaction with 2'-azidoethyl-2-bromoisobutylate (AEBIB). PDMAEMA and PPEGMA were grown gradually from nanoparticle surfaces using the "grafting from" approach, which rendered the SPIONs soluble in water and reversed aggregation. To the best of our knowledge, this is the first report that describes the functionalization of magnetic nanoparticles with dendritic-linear-brush-like triblock copolymers. The modified nanoparticles were systematically studied via TEM, FT-IR, DLS, XRD, NMR, TGA, and magnetization measurements. DLS measurement confirmed that the obtained dendritic-linear-brush-like triblock copolymer-grafted SPIONs had a uniform hydrodynamic particle size of average diameter less than 30 nm. The dendritic-linear-brush-like triblock copolymer-grafted SPIONs possessed excellent biocompatibility by methyl tetrazolium (MTT) assays against NIH3T3 cells and hemolysis assays with rabbit erythrocytes. Furthermore, an anticancer drug, doxorubicin (Dox), was used as a model drug and loaded into the dendritic-linear-brush-like triblock copolymer-grafted SPIONs, and subsequently, the drug releases were performed in phosphoric acid buffer solution pH = 4.7, 7.4, or 11.0 at 37 °C. The results verify that the dendritic-linear-brush-like triblock copolymer-grafted SPIONs possess pH-responsive drug release behavior. The Dox dose of the loaded and free drug required for 50% cellular growth inhibition was 2.72 and 0.72 μm/mL, respectively, according to MTT assay against a Hella cell line in vitro. Therefore, on the basis of its biocompatibility and drug release effect, the modified SPION could provide a charming opportunity to design some excellent drug delivery systems for therapeutic applications.     

Novel silicon-based alternating copolymers: synthesis,photophysical properties,and tunable EL colors

We synthesized novel silicon-based alternating copolymers for tunable electroluminescent (EL) colors by Heck synthetic method. Their thermal, photophysical and electroluminescent properties were studied. Most of them exhibited a blue-green EL color at the operating voltage of lower than 12 V. Unusually, we observed the white EL color from a EL device based on SiPhPVK. From photophysical studies and the time-resolved PL spectroscopies, it might be attributed to the formation of stabilized excited state in SiPhPVK. Furthermore, in order to reduce the operating voltage of their LED with increasing the electron affinity of the main chain in silicon-based alternating copolymers, we synthesized the silicon-based copolymers containing electron transporting oxadiazole units in main chain. We also studied their photophysical and electroluminescent properties.     

Nanostructured carbon arrays from block copolymers of polyacrylonitrile

Arrays of graphitic carbon nanoclusters were obtained by pyrolysis of nanoscale phase-separated block copolymers of polyacrylonitrile and poly(n-butyl acrylate). Upon heating in an inert atmosphere to temperatures ranging from approximately 400 to 1200 degrees C, polyacrylonitrile domains were converted into carbon nanoclusters, maintaining the overall shape and spacing, whereas the poly(n-butyl acrylate) phase was sacrificed. Preservation of the original nanoscale morphology of a block copolymer was possible only if pyrolysis was preceded by oxidation at temperatures of approximately 230 degrees C, in analogy with thermal stabilization of polyacrylonitrile precursor in the process used in the manufacturing of carbon fibers. Preorganization of the carbon precursor through self-assembly in block copolymers of polyacrylonitrile appears to be an attractive and robust strategy for templated synthesis of well-defined nanostructured carbon materials.     

Thiophene-based polyphosphazenes with tunable optoelectronic properties

The polyphosphazene backbone provides a versatile platform to explore numerous synthesis and structure–property relationships for many technological applications. In this study, a new class of polyphosphazene semiconducting materials was synthesized via macromolecular substitution, which integrates a  PN backbone with thiophene-based side groups. The synthesized thiophene-based polymers were subjected to chemical oxidation (oxidative coupling) to optimize their optoelectronic properties through side-chain chemistry. Both the spectroscopic and electronic analyses revealed that optical and electronic properties, as well as glass transition temperatures could be modulated by chemical oxidation of the polymers. The suitability of the polymers as potential semiconductors was further evaluated using their steady-state fluorescence quenching behavior in the presence of four different dopants (PC70BM, PC60BM, F4TCNQ, and TCNQ). It was found that the addition of dopant as a quencher to the polymer solutions does not form a complex in the ground state, and its excited state shows an efficient decrease in fluorescence intensity without altering the shape and peak position of the fluorescence band. The overall results demonstrate that the utilization of chemical oxidation via side-chain chemistry of polyphosphazenes offers an adaptable toolbox that can be used to make new and potentially useful polymeric semiconductors for applications in organic electronics.     

Bridged coordination polymer multilayers with tunable properties

Coordination multilayers consisting of Pd(II) pincer-type complexes and poly(vinyl pyridine) were synthesized and characterized. Film properties were found to be dependent on and could be tuned by varying bath deposition concentrations, polymer molecular weight, and solution additives that compete with binding. Generally, smoother, thinner films were obtained with lower poly(vinyl pyridine) deposition bath concentrations. Likewise, film thickness and roughness could be reduced by employing a higher-molecular-weight poly(vinyl pyridine). Film properties could also be influenced by using acetonitrile as a solution additive, effectively driving the binding equilibrium slightly toward the free species.     

Helical rosette nanotubes with tunable chiroptical properties

On the basis of transmission electron microscopy (TEM), dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and circular dichroism (CD) studies, compound 1 was shown to exist mainly in two states: (a) At high concentration (> or =1 mM, in methanol), 1 undergoes hierarchical self-assembly to generate rosette nanotubes with approximately 4 nm diameter and a concentration-dependent hydrodynamic radius in the range 10-100 nm. Under these conditions, addition of a chiral amino acid promoter (L-Ala), that binds to the crown ether moiety of 1 via electrostatic interactions, promotes a rapid transition (k(0) approximately equal 0.48 s(-1), for [1] = 0.046 mM, [L-Ala] = 2.8 mM) from racemic to chiral rosette nanotubes with predefined helicities as indicated by the resulting induced circular dichroism (ICD). (b) At low concentration (< or =0.04 mM, in methanol), 1 exists mainly in a nonassembled state as shown by TEM and DLS. Addition of L-Ala in this case triggers a relatively slow (k(0) approximately equal 0.07 s(-1) for [1] = 0.04 mM, [L-Ala] = 2.4 mM) sequence of supramolecular reactions leading to the hierarchical self-assembly of rosette nanotubes with predefined helicities. Under both conditions a and b, the kinetic data unveiled the intrinsic ability of the rosette nanotubes to promote their own formation (autocatalysis). The degree of chiral induction was found to depend dramatically upon the chemical structure of the promoter. This process appears also to follow an all-or-none response, as the vast majority of the crown ether sites must be occupied with a promoter for a complete transition to chiral nanotubes to take place. Finally, both supramolecular pathways a and b offer an efficient approach for the preparation of helical rosette nanotubes with tunable chiroptical properties and may also be viewed as a process by which a predefined set of physical and chemical properties that characterizes a molecular promoter is expressed at the macromolecular level.     

Synthesis of thermosensitive microgels with a tunable magnetic core

In this work, we describe a new methodology for the preparation of monodisperse and thermosensitive microgels with magnetic core. In order to produce such a material, hydrophobic magnetic Fe(3)O(4) nanoparticles were prepared by two methods: thermal decomposition and coprecipitation. The surface of these nanoparticles was modified by addition of 3-butenoic acid, and after that these nanoparticles were dispersed in water and submitted to free radical polymerization at 70 °C in the presence of N-isopropylacrylamide (NIPAM) and bisacrylamide. The result of this reaction was monodisperse microgels with a magnetic core. By varying the amount of 3-butenoic acid, it was possible to obtain hybrid microgels with different magnetic core sizes and different architectures.     

Synthesis,characterization, and properties of tunable thermosensitive amphiphilic dendrimer‐star copolymers with Y‐shaped arms

Novel and well‐defined amphiphilic dendrimer‐star copolymer poly(ε‐caprolactone)‐block‐(poly(2‐(2‐methoxyethoxy)ethylmethacrylate‐co‐oligo(ethylene glycol) methacrylate))₂ with Y‐shaped arms were synthesized by the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The investigation of thermal properties and the analysis of crystalline morphology indicate that the high‐branched structure of dendrimer‐star copolymers with Y‐shaped arms and the presence of amorphous P(MEO₂MA‐co‐OEGMA) segments together led to the complete destruction of crystallinity of the PCL segments in the dendrimer‐star copolymer. In addition, the hydrophilicity–hydrophobicity transition of the dendrimer‐star copolymer film can be achieved by altering the external temperatures. The amphiphilic copolymers can self‐assemble into spherical nanomicelles in water. Because the lower critical solution temperature of the copolymers can be adjusted by varying the ratio of MEO₂MA and OEGMA, the tunable thermosensitive properties can be observed by transmittance, dynamic laser light scattering, and transmission electron microscopy (TEM). The release rate of model drug chlorambucil from the micelles can be effectively controlled by changing the external temperatures, which indicates that these unique high‐branched amphiphilic copolymers have the potential applications in biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Fluorinated Alq3 derivatives with tunable optical properties

This communication reports that not only the emission colour but also the photoluminescence quantum yield of Alq3 can be tuned by introducing fluorine atoms at different positions; with fluorination at C-5 the emission is red-shifted with a tremendously decreased intensity, fluorination at C-6 causes a blue-shift with a significantly increased intensity, and fluorination at C-7 has a minor effect on both the colour and intensity of Alq3's emission.     

Nanostructured layered double hydroxide aerogels with enhanced adsorption properties

Aerogels of layered double hydroxides were prepared by a simple and eco-friendly method involving a quick coprecipitation followed by supercritical CO(2) drying. Such aerogels display high surface areas and enhanced adsorption behavior.     

Graphene-based multifunctional iron oxide nanosheets with tunable properties

We report the synthesis of graphenes with tunable properties due to the growth of needlelike iron oxide (IO) nanoparticles on their surfaces. The electrical conductivity, flexibility, and magnetic properties of graphene nanosheets (GNSs) could be tuned on demand by fine controlling both the surface coverage and the length of the IO nanoneedles. The degree of coverage of the IO nanoparticles on the surface of the GNSs made it possible to control the resulting properties of the IO/GNSs on demand. As examples of their utility, paperlike materials were generated by simple filtration, and the resulting IO/GNS nanocomposites showed extraordinary removal capacity and fast adsorption rates for As(V) and Cr(VI) ions in water. Another possible application is the preparation of multifunctional films equipped with conductivity, flexibility, and magnetic properties. The fabrication process is easy to scale up at a low cost. In addition, both the colloidal solution and film forms of the resulting IO/GNSs were effective for removal of heavy metal ions, meaning this material could be utilized for actual industrial applications.     

Two-level structured self-adaptive surfaces with reversibly tunable properties

We report a route to fabricate two-level structured self-adaptive surfaces (SAS) of polymer materials. The first level of structure is built by a rough polymer film that consists of needlelike structures of micrometer size. The second level of structure is formed by the nanoscopic self-assembled domains of a demixed polymer brush irreversibly grafted onto the needles. By exposing the surface to solvents that are selective to one of the components of the brush, we reversibly tune the surface properties. The large-scale surface structure amplifies the response and enables us to control wettability, adhesion, and chemical composition of the surface over a wide range.     

Nanostructured films of amphiphilic fluorinated block copolymers for fouling release application

New amphiphilic block copolymers S nSz m consisting of blocks with varied degrees of polymerization, n and m, of polystyrene, S, and polystyrene carrying an amphiphilic polyoxyethylene-polytetrafluoroethylene chain side-group, Sz, were prepared by controlled atom transfer radical polymerization (ATRP). The block copolymers, either alone or in a blend with commercial SEBS (10 wt% SEBS), were spin-coated in thinner films (200-400 nm) on glass and spray-coated in thicker films ( approximately 500 nm) on a SEBS underlayer (150-200 microm). Angle-resolved X-ray photoelectron spectroscopy (XPS) measurements proved that at any photoemission angle, varphi, the atomic ratio F/C was larger than that expected from the known stoichiometry. Consistent with the enrichment of the outer film surface (3-10 nm) in F content, the measured contact angles, theta, with water (theta w > or = 107 degrees ) and n-hexadecane (theta h > or = 64 degrees ) pointed to the simultaneous hydrophobic and lipophobic character of the films. The film surface tension gamma S calculated from the theta values was in the range 13-15 mN/m. However, the XPS measurements on the "wet" films after immersion in water demonstrated that the film surface underwent reconstruction owing to its amphiphilic nature, thereby giving rise to a more chemically heterogeneous structure. The atomic force microscopy (AFM) images (tapping mode/AC mode) revealed well-defined morphological features of the nanostructured films. Depending on the chemical composition of the block copolymers, spherical (ca. 20 nm diameter) and lying cylindrical (24-29 nm periodicity) nanodomains of the S discrete phase were segregated from the Sz continuous matrix (root-mean-square, rms, roughness approximately 1 nm). After immersion in water, the underwater AFM patterns evidenced a transformation to a mixed surface structure, in which the nanoscale heterogeneity and topography (rms = 1-6 nm) were increased. The coatings were subjected to laboratory bioassays to explore their intrinsic ability to resist the settlement and reduce the adhesion strength of two marine algae, viz., the macroalga (seaweed) Ulva linza and the unicellular diatom Navicula perminuta. The amphiphilic nature of the copolymer coatings resulted in distinctly different performances against these two organisms. Ulva adhered less strongly to the coatings richer in the amphiphilic polystyrene component, percentage removal being maximal at intermediate weight contents. In contrast, Navicula cells adhered less strongly to coatings with a lower weight percentage of the amphiphilic side chains. The results are discussed in terms of the changes in surface structure caused by immersion and the effects such changes may have on the adhesion of the test organisms.     

Structurally diverse and readily tunable photocrosslinked chondroitin sulfate based copolymers

Our group has previously reported on successful biofunctionalization of poly(ethylene glycol diacrylate) (PEGDA) gels using chondroitin sulfate (CS) and improving moduli of methacrylated‐CS (MCS) gels using short PEGDA comonomers. Here, we focused on understanding the composition‐property relationship of MCS‐PEGDA copolymers. By changing concentration, composition, and medium's ionic strength the gels were modified to show a diverse range of properties. Photopolymerized copolymers with >4:1 ratio of one component had compressive moduli of up to 24 times higher and up to 17 times lower swelling degree (q) than those of MCS alone. The increased moduli and lowered q were consistent with the hypothesis that PEGDA improves kinetic chain growth by overcoming the steric hindrances of the macromer. The swelling and moduli of the gels were tuned by changing the ratio of the comonomers. The swelling and moduli of the gels were lowered with presence of salt in solution while the fracture strain increased. These changes were hypothesized to be the result of transition of CS chain conformation from highly extended and non‐Gaussian to less extended and Gaussian distribution. The complete understanding of MCS‐PEGDA composition–property relationship provides a general strategy to tune the moduli or q of polysaccharide‐based hydrogels while avoiding undesirable phase separation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1070–1079     

Structural interconversion between a chain polymer and a two-dimensional network accompanied by tunable magnetic properties

The reaction of 2-hydroxypyrimidine-4,6-dicarboxylic acid (H(3)hpdc) with CuCl(2) under different temperatures gives a chain-like compound [Cu(2)(hpdc)(OH)(H(2)O)(4)]·H(2)O and a layer-like compound [Cu(2)(hpdc)(OH)(H(2)O)], which exhibit structural interconversion and tunable magnetic properties upon dehydration and hydration.