Thermodynamic Properties of NaCl Solutions at Subzero Temperatures

Heat capacities at infinite dilution of NaCl (aq) for the temperature range 0 to –25°C and apparent molar volumes at infinite dilution for 0 to –15°C have been estimated from a synthesis of experimental data collected at subzero temperatures. The parameters of the Helgeson–Kirkham–Flowers (HKF) equation for Na⁺ (aq) have been obtained, from which the Gibbs energies of Na⁺ and Cl^– have been calculated. The estimated values of Pitzer-equation parameters for thermal and activity-coefficient properties have been adjusted for subzero temperatures. The experimental phase diagram for the NaCl–H₂O system could be reproduced with these data, demonstrating the low-temperature applicability of the HKF model to extrapolate thermodynamic properties of aqueous-solution species at infinite dilution.     

Choice of the best region for channel-by-channel summation of estimating the intensity of single photopeaks

The influence of partial peak width integration on the statistical error has been investigated. It has been shown that integration of the central photopeak part —±(0.55–0.64) FWHM for narrow peaks and ±(0.50–0.53) FWHM for wide peaks-allows to decrease the statistical error 1.5–2.0 times in comparision with the TPA method. The results obtained are valid both for real photopeaks and for smoothed spectra. The theoretical results have been confirmed by experimental data.     

Liquid–liquid equilibria for pseudo-ternary systems: (Sulfolane + 2-ethoxyethanol) + octane + toluene at 293.15 K

Liquid–liquid equilibrium data, both binodal and tie lines are presented for the pseudo-ternary systems: {(sulfolane + 2-ethoxyethano) (1) + octane (2) + toluene (3)} at 293.15 K. The experimental liquid–liquid equilibrium data have been correlated using NRTL and UNIQUAC models, and the binary interaction parameters of these components have been presented. The correlated tie lines have been compared with the experimental data. The comparisons indicate that both NRTL and UNIQUAC models satisfactorily correlated the equilibrium compositions. The tie-line data of the studied systems also were correlated using the Hand method.     

Study and prediction of alkylbenzenes’ vapour pressures

Vapour pressures of 1,4-di-tert-butylbenzene (379–1647 Pa), 1,3,5-tri-tert-butylbenzene (203.9–241 Pa), 1-methyl-3,5-di-tert-butylbenzene (16.7–435.8 and 1318–103,880 Pa), and 1,2,2-trimethylpropybenzene (36.3–287.4 Pa) have been measured using a transpiration method and an ebuliometric method. Based on the literature and obtained by the authors experimental data a comparative study of prediction capabilities of the following methods has been carried out: Ambrose–Walton's, Lee–Kesler's, Riedel's and the modification of Riedel's method made by Vetere.     

High-pressure phase behaviour of the binary system {CO2 + cis-decalin} from (292.75 to 373.75) K

The phase behaviour of the {CO₂ (1) + cis-decalin (2)} binary system has been experimentally studied at temperatures ranging from (292.75 to 373.75) K. Saturation pressures, ranging from (15.9 to 490.5) bar, were obtained using a variable volume high-pressure cell by visual observation of phase transitions at constant overall composition. For this system, no literature data are available and the results obtained in this study reveal the occurrence of vapor–liquid, liquid–liquid, and vapor–liquid–liquid phase transitions in the investigated temperature range. A total of 133 experimental points are reported including bubble points, dew points, liquid–liquid phase equilibria, and coordinates of the three-phase line. The experimental data can be reasonably predicted by the PPR78 model in which the temperature-dependent binary interaction parameter is calculated by a group contribution method.     

Thermodynamics of formation of carnallite type double salts

The solubility of the systems RbCl–MgCl₂–H₂O, RbBr–MgBr₂–H₂O and CsBr–MgBr₂–H₂O have been investigated by the physicochemical analysis method at 25°C and formation of carnallite type double salts was established. The Pitzer model is used to calculate the thermodynamic functions needed to plot the solubility isotherms of the systems. The results obtained are in good agreement with the experimental data. The free energies of formation of carnallite and bromcarnallite type double salts from simple salts and the standard molar energies of formation are estimated.     

Ab initio, density functional theory and structural studies of 4-amino-2-methylquinoline

The Fourier transform infrared (FTIR) and FT-Raman spectra of 4-amino-2-methylquinoline (AMQ) have been recorded in the range 4000–400 and 4000–100 cm⁻¹, respectively. The experimental vibrational frequency was compared with the wavenumbers obtained theoretically by ab initio HF and DFT–B3LYP gradient calculations employing the standard 6-31G** and high level 6-311++G** basis sets for optimised geometry of the compound. The complete vibrational assignment and analysis of the fundamental modes of the compounds were carried out using the experimental FTIR and FT-Raman data, and quantum mechanical studies. The geometry and normal modes of vibration obtained from the HF and DFT methods are in good agreement with the experimental data. The potential energy distribution of the fundamental modes was calculated with ab initio force fields utilising Wilson's FG matrix method. The NH-π interactions and the influence of amino and methyl groups on the skeletal modes are investigated.     

Temperature dependence of quantitative characteristics of chaotic regime in Belousov-Zhabotinskii reaction

In a Ferroin-catalyzed oscillatory Belousov-Zhabotinskii reaction, the temperature dependences of the largest Lyapunov exponent (LLE) and the induction period for a chaotic regime to appear are linear in the 285–308 interval when plotted on Arrhenius coordinates. For the LLE, the activation energies calculated for different concentrations of the catalyst are in the 82–126 kJ/mole interval, and for the induction period in the 61–95 kJ/mole interval. On the basis of the experimental data, it has been concluded that this autooscillatory chemical system, within a narrow range of catalyst concentrations, is relatively insensitive to random, small, external perturbations.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 29, No. 2, pp. 186–190, March–April, 1993.The authors wish to thank K. B. Yatsimirskii, Academician of the Academy of Sciences of Ukraine, for discussing the data obtain in this work.     

Distribution of electron density and internal rotation in phospha-alkenes according to data from quantum-chemical calculations by the MNDO method

A quantum-chemical investigation of the characteristics of the phosphorus-carbon bond and the internal rotation around it in phospha-alkenes has been carried out in the MNDO approximation. The results of the calculation have been compared with experimental dynamic ¹H NMR data.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 23, No. 6, pp. 734–736, November–December, 1987.     

Thermodynamic properties of electrolyte solutions: An EMF study of the activity coefficients of KCl in the system KCl−KNO3−H2O at 25, 35 and 45°C

Electromotive force measurements were carried out on the system KCl–KNO₃–H₂O at constant total ionic strengths of 0.5, 1.0, 2.0 and 3.0 mol-kg^–1 and at 25, 35 and 45°C using a cell consisting of a potassium ionselective electrode and a Ag/AgCl electrode. The Harned coefficients and the Pitzer binary and ternary interaction parameters for the system have been evaluated at each temperature. The osmotic coefficients, excess free energies of mixing and heats of mixing of the system have been predicted at each of the experimental temperatures and ionic strengths. The solubility data at 25°C are also interpreted.     

Vapor–liquid equilibria and interfacial tensions for the ternary system acetone + 2,2′-oxybis[propane] + cyclohexane and its constituent binary systems

Isobaric vapor–liquid equilibrium data have been measured for the ternary system acetone + 2,2′-oxybis[propane] + cyclohexane, and its constituent binaries at 94 kPa and in the temperature range 324–350 K in a vapor–liquid equilibrium still with circulation of both phases. The dependence of the interfacial tensions of these mixtures on concentration was also determined at atmospheric pressure and 303.15 K, using the maximum bubble pressure technique.From the experimental results, it follows that both the ternary and binary mixtures exhibit positive deviations from ideal behavior and, additionally, azeotropy is present for the binaries that contain acetone. The application of a model-free approach allows conclusions about the reliability of the present vapor–liquid equilibrium data for all the indicated mixtures. Furthermore, the determined interfacial tensions exhibit negative deviation from linear behavior for all the analyzed mixtures, and aneotropy is observed for the acetone + cyclohexane mixture.The vapor–liquid equilibrium data of the binary mixtures were well correlated using the NRTL, Wilson and UNIQUAC equations. In a similar manner, the interfacial tensions of the binary mixtures were smoothed using the Redlich–Kister equation. Scaling of these models to the ternary mixture allows concluding that both the vapor–liquid equilibrium data and the interfacial tensions can be reasonably predicted from binary contributions.     

The system HCl+InCl3+H2O from 5 to 55°C: Application of Harned's rule

Electromotive-force measurements of cells containing hydrochloric acid and indium chloride have been made to determine the variation of the log of the activity coefficient of hydrochloric acid with change in the amount of indium chloride in the solution. The simpler Harned equations have been used to fit the data. The quadratic terms in the Harned equations for the activity coefficients of HCl in the salt mixtures are required for a good fit of the 968 experimental emf data points at all the experimental ionic strengths and temperatures. The more convenient Pitzer ion-interaction treatment of the data will be reported in a separate publication which will include the values of the Pitzer parameters for pure InCl₃(aq), and mixing parameters for H⁺–In⁺³ and H⁺–In⁺³–Cl^–. A comprehensive investigation on the mixed electrolyte solutions at 11 different constant total ionic strengths ranging from 0.05 to 3.5 mol-kg^–1 was made at 11 temperatures from 5 to 55°C using the cell without liquid junction of the type: Pt,H₂(g, 1 atm)|HCl(m _A)+InCl₃(m _B)+H₂O|AgCl,AG (A).     

Nitric acid transport across TBP—Kerosene oil supported liquid membranes

HNO₃ transport across tri-n-butyl phosphate kerosene oil supported liquid membrane with or without uranyl ion transport has been studied. Parameters studied are the effect of TBP in the membrane, nitric acid in the feed solution and nitrate ion concentration in the feed solution. The flux of protons for 1 to 10 mol·dm^–3 HNO₃ solution is in the range of (0–25)·10^–4 mol·m^–2·s^–1 and for the TBP concentration range of 0.359 to 3.59 mol·dm^–3, the flux determined is (8.9 to 22)·10^–4 mol·m^–2·s^–1. From the experimental data and using theoretical equations the complex under transport through the membrane appears to be 2TBP·HNO₃ both in the presence and absence of uranyl ions. The diffusion coefficient for H⁺ ions through the membrane as a function of TBP concentration varies from (53 to 6)·10^–12 m²·s^–1, based on experimental flux and permeability data. The values of this coefficient supposing 2TBP·HNO₃ as diffusing species, based on viscosity data and theoretical estimation varies from (82.50 to 3.30)·10^–12 m²·s^–1. The value of distribution coefficient varies in the reverse direction from 0.06 to 1.46 at the same TBP concentration.     

Conjugation and proton exchange equilibria I. Significant role of proton exchange and homoconjugation equilibria in protonic hetero systems

The significant role of the proton exchange and homoconjugation (formation of AHA^– and A₁HA ₁ ^– complexes) equilibria in protonic hetero systems (HA+A ₁ ^– ) has been shown from analysis of published data and from my own simple experiments. It is concluded that there is a need to reconsider some basic hydrogen bond problems. One of these problems-the existence of heteroconjugates in polar solvents — has been verified and illustrated with suitable experimental evidence (IR and UV-VIS spectra). The most accepted experimental evidence for the double minimum potential in the hydrogen bridge has been questioned as being in disagreement with the equilibrium law. A simple relation between the heteroconjugation constant, the parent homoconjugation constants and the proton exchange constant is also postulated. This relation fulfills important theoretical requirements, however, it is not applicable in extreme cases.To the memory of Bogdan Przybyszewski.     

Calculations of silicooxygen ring vibration frequencies

In the work model calculations of the vibrations of ideally isolated silicooxygen rings (using PM3 method) have been carried out. three-, four-, and six-membered rings have been considered. It has been found that that the three-membered silicooxygen rings are flat and practically undeformed showing D_3h symmetry. The rings of higher number of ring members (i.e. n>3) are deformed to some extent. The deformation reveals itself most significantly in the Si–O–Si bond angles distribution. In the case of all the rings the bridging Si–O–Si bonds are ca. 0.02–0.04 Å shorter than the non-bridging Si–O⁻ bonds. Hypothetical IR spectra for all the rings considered have been also calculated. Analysis of these hypothetical spectra leads to the conclusion that the whole spectrum can be divided into four wavenumbers regions, 1200–1100 cm⁻¹ stretching Si–O(Si) vibrations; 1000–800 cm⁻¹ stretching Si–O⁻ vibrations; 800–600 cm⁻¹; the region in which a band characteristic of silicooxygen rings appears, and below 600 cm⁻¹ bending ⁻O–Si–O⁻ and (Si)O–Si–O(Si). It has been also found that as the number of ring members increases the ‘ring band’ shifts to lower wavenumbers: 725 cm⁻¹ for three-membered rings, 650 cm⁻¹ for four-membered rings and 610 cm⁻¹ for six-membered rings. Calculated spectra have been compared with the experimental spectra of cyclosilicates. They showed good agreement in the 1200–600 cm⁻¹ region. In the experimental spectra as well as in the calculated ones, with increasing the number of ring members the ‘ring band’ shifts towards lower wavenumbers.     

Molar and Partial Molar Excess Volumes of Benzene in Methyl Ester Solutions at 25°C

Molar and partial molar excess volumes of mixtures of benzene with several methyl esters (from methanoate to decanoate) were determined, over the whole concentration range, at 25°C and atmospheric pressure from experimental densities and correlated by a suitable equation. The applicability of the Flory and Priggogine–Flory–Pattersort models for predicting molar excess volumes is tested. The calculated values with Flory and Priggogine–Flory–Patterson are similar and agree poorly with the experimental data.     

Determination of the chain conformation of polypropylene in the crystalline state by neutron scattering

Summary Wide and small angle neutron scattering from melt-crystallised isotactic polypropylene mixtures of deuterated and protonated molecules were measured in aQ range of 0.003 Å^–1 to 0,8 Å^–1. The scattering curves between 0.1 Å^–1 and 0.8 Å^–1 are very sensitive to the amount of folding of the chains within a lamella. Different annealing conditions which influence the degree of crystallinit between 0.39 and 0.67 and the long spacing between 125 Å and 245 Å had an insignificant influence on the scattering in this range. For various arrangements of crystalline sequences scattering functions were calculated. Best agreement with the experimental scattering curves was obtained for a mixture of single and double crystalline sequences of equal proportion. An adjacent reentry folding model for the molecular conformation is not consistent with the experimental data.The neutron scattering experiments have been performed at the Institute Laue-Langevin in Grenoble/France and at the Kernforschungsanlage Jülich/Germany.     

Spectra and Structure of Silicon-Containing Compounds. XXVIII1 Infrared and Raman Spectra,Vibrational Assignment,and Ab Initio Calculations of Vibrational Spectrum and Structural Parameters of Vinyltrichlorosilane

The infrared spectra (3200-50 cm^–1) of gaseous and solid vinyltrichlorosilane, CH₂=CH-SiCl₃, have been recorded. In addition, the Raman spectrum (3200-10 cm^–1) of the liquid has been recorded and quantitative depolarization values obtained. The infrared spectrum of the sample dissolved in liquid xenon (–80°C) has also been recorded. Using the experimental data and normal coordinate calculations with scaled ab initio force constants, the complete vibrational assignment is proposed. The torsional mode was observed in the infrared spectrum of the gas at 69 cm^–1 and the threefold barrier of internal rotation was calculated to be 500 cm^–1 (5.98 kJ/mol). Ab initio calculations have been carried out at the restricted Hartree–Fock level of the theory as well as with full electron correlation by the perturbation method to second order with different basis sets up to 6-311+G(d,p) to obtain the optimized geometries, harmonic force constants, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies. The ab initio predicted structural parameters are compared with those obtained from a previous electron diffraction study.     

Far-infrared spectra of lanthanide complexes with 8-hydroxyquinoline

Summary Vibrational spectra of lanthanide oxines have been measured in the far-infrared region. In addition, the similar yttrium complex was investigated for further experimental evidence for the proposed band assignments. The most important metal-oxygen and metal-nitrogen bond vibrations have been attributed to absorptions between 390–350 cm^–1 and 210–170 cm^–1, respectively.

---

Ferne IR-Spektren von Lanthanidenkomplexen mit 8-Hydroxychinolin

Zusammenfassung Es wurden die Vibrationsspektren von Lanthanid-Oxinen im fernen IR-Bereich gemessen. Zusätzlich wurde der analoge Yttrium-Komplex untersucht, um die Bandenzuordnungen experimentell zu stützen. Die wichtigsten Metall-Sauerstoff- und Metall-Stickstoff-Bindungsschwingungen wurden den Absorptionen zwischen 390–350 cm^–1 und 210–170 cm^–1 zugeordnet.

     

Electronic structure and N KVV Auger spectrum of the ammonium radical

A procedure for calculating multiplet-splitting energies in systems with an unpaired electron has been presented. The electronic structure and N KVV Auger spectrum of the ammonium radical have been calculated by the discrete-variation-X method. The results have been compared with experimental data.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 21, No. 1, pp. 10–18, January–February, 1985.