Quaternary ammonium bromide surfactant adsorption on low-index surfaces of gold. 1. Au(111)

The coadsorption of the anionic and cationic components of a model quaternary ammonium bromide surfactant on Au(111) has been measured using the thermodynamics of an ideally polarized electrode. The results indicate that both bromide and trimethyloctylammonium (OTA(+)) ions are coadsorbed over a broad range of the electrical state of the gold surface. At negative polarizations, the Gibbs surface excess of the cationic surfactant is largely unperturbed by the presence of bromide ions in solution. However, when the Au(111) surface is weakly charged the existence of a low-coverage, gaslike phase of adsorbed halide induces an appreciable (~25%) enhancement of the interfacial concentration of the cationic surfactant ion. At more positive polarizations, the coadsorbed OTA(+)/Br(-) layer undergoes at least one phase transition which appears to be concomitant with the lifting of the Au(111) reconstruction and the formation of a densely packed bromide adlayer. In the absence of coadsorbed halide, the OTA(+) ions are completely desorbed from the Au(111) surface at the most positive electrode polarizations studied. However, with NaBr present in the electrolyte, a high surface excess of bromide species leads to the stabilization of adsorbed OTA(+) at such positive potentials (or equivalent charge densities).     

In situ STM study of potential-driven transitions in the film of a cationic surfactant adsorbed on a Au(111) electrode surface

Electrochemical scanning tunneling microscopy (EC-STM) has been employed to study the structure of a film formed by cationic surfactant N-decyl-N,N,N-trimethylammonium triflate (DeTATf) adsorbed on the Au(111) electrode surface. The film is disordered at potentials corresponding to either large negative charge densities or to positive charge densities. At small negative charge densities, an ordered adlayer of flat-lying DeTATf molecules is formed. High-resolution images of this adlayer reveal that the triflate anion is coadsorbed with the N-decyl-N,N,N-trimethylammonium cation, effectively forming an ion pair at the electrode surface. This is a significant result because it explains why this surfactant behaves like a zwitterionic surfactant at the metal/solution interface.     

Dewetting behavior of aqueous cationic surfactant solutions on liquid films

Previous experimental work has shown that the spreading of a drop of aqueous anionic surfactant solution on a liquid film supported by a negatively charged solid substrate may give rise to a fingering instability (Afsar-Siddiqui, A. B.; Luckham P, F.; Matar, O. K. Langmuir 2003, 19, 703-708). However, upon deposition of a cationic surfactant on a similarly charged support, the surfactant will adsorb onto the solid-liquid interface rendering it hydrophobic. Water is then expelled from the hydrophobic regions, causing film rupture and dewetting. In this paper, experimental results are presented showing how the surfactant concentration and film thickness affect the dewetting behavior of aqueous dodecyltrimethylammonium bromide solutions. At low surfactant concentrations and large film thicknesses, the film ruptures at a point from which dewetting proceeds. At higher concentrations and smaller film thicknesses, the ruptured region is annular in shape and fluid moves away from this region. At still higher concentrations and smaller film thicknesses, the deposited surfactant forms a cap at the point of deposition that neither spreads nor retracts. This variation in dewetting mode is explained by considering the relative Marangoni and bulk diffusion time scales as well as the mode of assembly of the surfactant adsorbed on the solid surface.     

Liquid–liquid phase transfer of magnetite nanoparticles

The study presents first experimental results of the transfer of magnetite nanoparticles from an aqueous to a second non-miscible non-aqueous liquid phase. The transfer is based on the adsorption of macromolecular surfactants onto the particle surface at the liquid–liquid interface. For a successful direct phase transfer, it is essential to have cations, like ammonium ions, present in the aqueous phase as well as a threshold concentration of surfactant in the organic liquid phase. While penetrating the liquid–liquid interface, the particles are covered with the surfactant and therefore a partial de-agglomeration is initiated. Based on literature and experimental data a mechanism of surfactant adsorption is proposed. The competing adsorption of the surfactant molecules at the liquid–liquid interface leads to the formation of emulsions and therefore to a hindrance for particles passing the interface. Nevertheless a high efficiency of 100% yield can be reached using optimized process parameters for the phase transfer process.     

Mechanism of a four-phase liquid membrane oscillator containing hexadecyltrimethylammonium bromide

The oscillatory behavior of a nitromethane based liquid membrane oscillator was investigated to contribute to the oscillation mechanism at the molecular level. At the beginning the system contains three phases: the aqueous donor phase in which the cationic surfactant, hexadecyltrimethylammonium bromide and ethanol are present and the aqueous acceptor phase made up by sucrose solution separated by the liquid membrane containing a constant amount of picric acid. During experiment a new phase x is created between the liquid membrane and acceptor phase. It was established that the oscillations take place at the membrane/phase x and the phase x/acceptor phase interfaces. Five basic regions can be distinguished in the oscillation pattern. The molecular events provoking the oscillations of electric potential difference between the two aqueous phases involve essentially the diffusion of hexadecyltrimethylammonium bromide and ion pairs formed by the cation of the surfactant and the picrate anion to the vicinity of the membrane/phase x interface, sudden adsorption of these ion pairs at this interface in noncatalytic and autocatalytic steps, desorption of ion pairs from the membrane/phase x interface into phase x, diffusion of ion pairs to the vicinity of phase x/acceptor phase interface, and sudden adsorption at this interface followed by desorption to the aqueous acceptor phase. It is shown by numerical simulations that the proposed mechanism may account for the observed oscillations and for the species distribution throughout the system as found experimentally. This four-phase system behaves like two coupled oscillators.     

Adsorption of phytosterol ethoxylates on silica in an aprotic room-temperature ionic liquid

The adsorption of a nonionic surfactant at a silica/room-temperature ionic liquid interface has been characterized on the basis of analytical data obtained through a combination of surface force measurements, in situ soft-contact atomic force microscope (AFM) images, and quartz crystal microbalance with dissipation monitoring (QCM-D) data. The surfactant employed in this study is a kind of phytosterol ethoxylate (BPS-20), and the ionic liquid selected here is aprotic 1-ethyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide (EmimTFSI). This ionic liquid spontaneously forms solvation layers on silica, being composed of an Emim(+) cation layer and EmimTFSI ion pair layers. The addition of BPS-20 disrupts these solvation layers and suggests a surfactant layer adsorbed at the interface. This is the first report demonstrating the adsorption of nonionic surfactants at the solid/aprotic ionic liquid interface.     

LASER PHOTOLYSIS STUDY ON POLY(N-VINYLCARBAZOLE) ADSORBED ON CELLULOSE SUBSTRATE

Abstract Triplet state and photoinduced charge separation dynamics under adsorption was Confirmed for the first time for the polymer without or with coadsorbed electron acceptor, respectively. The absorption spectrum of the triplet polymer is similar to the T_n← T₁ band of N -ethylcarbazole, showing no appreciable interchromophoric interaction. Absorption spectra of the coadsorbed systems comprise the polymer cation and electron acceptor anion. The ion radicals on the cellulose substrate undergo mutual recombination, and simple uni- and bimolecular decay kinetics do not hold. This mechanism was compared with that for poly( N -vinylcarbazole) film.     

Photochemistry of adsorbed nitrate

In the atmosphere, gas-phase nitrogen oxides including nitric acid react with particle surfaces (e.g., mineral dust and sea salt aerosol) to yield adsorbed nitrate, yet little is known about the photochemistry of nitrate on the surface of these particles. In this study, nitrate adsorbed on alumina surfaces, a surrogate for mineral dust aerosol, is irradiated with broadband light (lambda > 300 nm) in the absence and presence of coadsorbed water, at <1% and 45 +/- 2% relative humidity (%RH), respectively, and molecular oxygen. Upon irradiation, the nitrate ion readily undergoes photolysis to yield nitrogen-containing gas-phase products, NO2, NO, and N2O. Although NO2, NO, and N2O form under the different conditions investigated, both coadsorbed water and molecular oxygen change the gas-phase product distribution, with NO being the major product under dry and humid conditions in the absence of molecular oxygen and NO2 the major product in the presence of molecular oxygen. To the best of our knowledge, this is the first study to investigate the role of solvation by coadsorbed water in the photochemistry of adsorbates at solid interfaces and the roles that molecular oxygen, adsorbed water, and relative humidity may have in photochemical processes on aerosol surfaces that have the potential to alter the chemical balance of the atmosphere.     

Nonlinear spontaneous oscillations at the liquid/liquid interface produced by surfactant dissolution in the bulk phase

The results of theoretical and experimental studies of spontaneous nonlinear oscillations produced at the liquid/liquid interface by surfactant transfer from a point source situated in one of the bulk phases are presented. The theoretical analysis is based on the direct numerical simulation of the system evolution. The experiments are performed for the heptane/water interface using middle-chain aliphatic alcohols as surfactants. The results for the oil/water interface are compared with the corresponding data obtained for the air/water interface. The presented results allow the conclusion that auto-oscillations at the air/liquid and liquid/liquid interfaces are governed by very similar mechanisms but their characteristics are strongly dependent on the properties of the two contacting media, in particular, on the surfactant partition coefficient.     

Evidence for Ag cluster vibrations in enhanced Raman scattering from the Ag/electrolyte interface

Low-frequency vibrational features are observed in the enhanced Raman spectra from an electrochemically roughened Ag electrode. Evidence is found that these features are related to resonant Raman scattering from the internal vibrations of small Ag clusters stabilized on the surface. Comparison of the experimental data with the results of a simple normal mode calculation suggests that a possible identity for such clusters is pyramidal Ag⁺₄. These clusters may be responsible for some of the “chemical” factor in SERS from coadsorbed molecules.     

Surface properties of liquid reactive oligomers

Spreading coefficients and the work of adhesion of oligomers to different substrates are calculated based on the results of studying the wettability and surface tension of ED-20 epoxy oligomer and oligooxyethyleneoxypropylene triols. It is shown that the addition of surfactant (ethoxylated alkyl phenols) considerably enhances the wettability of the studied oligomers. It is established that the addition of surfactant imparted to the properties of oligomers and surface energy characteristics of composites based on these oligomers nonlinearly depend on the degree of ethoxylation.     

Adsorption Isotherms of Cetylpyridinium Chloride with Iron III Salts at Air/Water and Silica/Water Interfaces

The interaction of iron III salts and cetylpyridinium chloride (CPC) has been studied at the air/water and silica/water interfaces. The surface tension of cetylpyridinium chloride has been determined in aqueous solutions in the presence of iron III chloride and iron III nitrate at two constant pH values, namely, 3.5 and 1.2. It is shown that the surface tension of the cationic surfactant depends upon the ionic strength of the solution through the pH adjustment in the presence of the former salt but not in the presence of the latter. The effect of iron III nitrate on the surface tension of CPC is similar to that of potassium nitrate, indicating that the iron III various-hydrolyzed species do not interfere with the composition of the air/water interface. The competitive adsorption of iron III nitrate salt and the cationic surfactant at a silica/water interface was next investigated. The adsorption isotherms were determined at pH 3.5. It is shown that although the iron III ions, which were added to the silica dispersion in the presence of the cetylpyridinium ions, were strongly bound to the anionic surface sites, the surfactant ions are not salted out in the solution but remain in close vicinity of the silica surface. Conversely as the cationic surfactant is added first to the silica dispersion in the presence of the adsorbed iron III ions, the metal ions and the surfactant ions are both coadsorbed onto the silica surface. It is suggested that iron III hydrolyzed or free cations and the cationic surfactant molecules may not compete for the same adsorption sites onto the silica surface.     

Competitive adsorption of polymer and surfactant at a liquid droplet interface and its effect on flocculation of emulsion

We investigate the competitive adsorption of polymer and surfactant at oil-water interface by measuring the hydrodynamic diameter, zeta potential, microstructure and rheology. The polymer used in our experiment is a statistical copolymer of polyvinyl alcohol and vinyl acetate copolymer (PVA-Vac) and the emulsion is oil-in-water system with an average droplet diameter of 200 nm. At low surfactant concentrations, the hydrodynamic diameter remains unchanged but above a critical aggregation concentration, it increases dramatically. The phase contrast optical microscopic images of emulsion droplets preadsorbed with polymers of higher molecular weight show a systematic increase in the floc size on increasing surfactant concentration due to biding of polymer-surfactant complexes on several droplets. The dramatic increase in zeta potential of the droplets on increasing ionic surfactant concentration clearly indicates a preferential adsorption of surfactant at the oil-water interface. The enhanced viscosity upon addition of ionic surfactant into polymers confirms the strong interaction between them. Our studies show that lower molecular weight polymers with suitable ionic surfactants can synergistically enhance the stability of formulations, while longer chain polymers induce bridging flocculation. Our results are useful for preparing oil-in-water formulations with long term stability.     

Marangoni instability and spontaneous non-linear oscillations produced at liquid interfaces by surfactant transfer

The systems producing non-linear spontaneous oscillations of the interfacial tension and electric potential are considered and the available criteria for development of convective instability by the surfactant transfer through a liquid interface are discussed. The non-linear oscillations are observed by the surfactant transfer from a point-like source situated in the bulk of liquid, by the transfer of two ionic solutes through a liquid interface in two opposite directions, and by the transfer of ionic solutes through a liquid membrane. All these systems are governed by more complicated mechanisms than merely arising oscillatory convective instability. The main experimental results obtained for these three systems as well as theoretical models proposed for their explanation are discussed.     

Negative ion formation in electron-stimulated desorption of CF2Cl2 coadsorbed with polar NH3 on Ru(0001)

Photon-induced dissociation of CF2Cl2 (freon-12) in the stratosphere contributes substantially to atmospheric ozone depletion. We report recent results on dissociation and negative ion formation in electron-stimulated desorption (ESD) of CF2Cl2 on Ru(0001), when CF2Cl2 is coadsorbed with a polar molecule (NH3), for electron energies ranging from 50 to 300 eV. Two different time-of-flight methods are used in this investigation: (a) an ESD ion angular distribution detector with wide collection angle and (b) a quadrupole mass spectrometer with narrow collection angle and high mass resolution. Many negative ESD fragments are seen (F-, Cl-, FCl-, CF-, F2-, and Cl2-), whose intensities depend on the surface preparation. Using both detectors we observe a giant enhancement of Cl- and F- yields for ESD of CF2Cl2 coadsorbed with approximately 1 ML of NH3; this enhancement (>10(3) for Cl-) is specific to certain ions, and is attributed to an increased probability of dissociative electron attachment due to "trapped" low-energy secondary electrons, i.e., precursor states of the solvated electron in NH3. In further studies, the influence of polar NH3 spacer layers (1-10 ML) on ESD of top-layer CF2Cl2 is determined, and compared with thick films of condensed CF2Cl2. The magnitudes and energy dependences of the Cl- yields are different in these cases, due to several contributing factors.     

Relaxation of surfactants adsorption layers at liquid interfaces

The relaxation behaviour of surfactant layers provides a deep insight into the composition and structure of adsorbed layers at liquid interfaces. The development of professional experimental tools created a helpful basis for an increasing interest in these studies. In addition, the theoretical basis has been improved in many aspects such that for several surfactant systems a quantitative understanding is already possible. In particular the consideration of the changes in molar area of adsorbed molecules, introduced into the thermodynamics of adsorbed layers first by Fainerman in 1995, due to changes in the surface coverage allowed a considerably better, in many cases even quantitative understanding of the surface relaxation. Another important additional property, introduced into the thermodynamics and consequently also into the mechanisms of relaxation processes in interfacial layers, is the two-dimensional compressibility, important for the response to deformations of rather packed interfacial layers. The experimentally observed negative dilational viscosity is discussed only briefly and considered essentially in terms of experimental and theoretical shortcomings. The relaxation behaviour of nano- and microparticles, in literature often addressed is compounds able to act “instead of surfactants” are also addressed and some peculiarities discussed, while the obvious interrelation between the dilational rheology and stability of foams and emulsions is not analysed in detail.     

Spontaneous and facilitated micelles formation at liquid|liquid interface: towards amperometric detection of redox inactive proteins

Spontaneous micelles formation by ionic surfactants has been detected amperometrically as an appearance of ion transfer across the water–dichloroethane interface noticed from linear dependence between the current and potential (Ohm’s law). At low surfactant concentrations, when its spontaneous aggregation does not occur, the micelles formation facilitated by a potential across the interface has been registered. The transfer of redox inactive proteins through water–dichloroethane interface in the presence of surfactant has been observed voltammetrically. It has been shown, that the presence of protein does not affect thermodynamics of micelles formation, but accelerates kinetics of ion transfer through the interface. The electrochemically controlled transfer of redox inactive proteins through liquid|liquid interface may lead to the development of methods for direct amperometric detection of biomolecules.     

Water transfer in emulsified liquid membrane processes

Water transfer through the organic phase of a water-in-oil emulsion (liquid membrane) is investigated as a function of emulsion composition, water activity, temperature and agitation in a two-compartment cell. It is shown that the rate of transfer increases with the difference of water activities in the two aqueous phases and depends on the nature and the concentration of the surfactant. A decrease of the organic phase viscosity and an increase in temperature increase the transfer rate. A mathematical model is proposed which is based on the assumption of water—surfactant associations and carrier-mediated water transport. This model qualitatively explains the experimental results.     

Nematic-isotropic phase transition in lyotropic liquid crystals

We propose a Landau-de Gennes phenomenological model to describe the nematic-isotropic phase transition in lyotropic liquid crystals. The possibility of a first or second order transition is explored by means of the variation of the concentration of surfactant. We show that a Landau point on the nematic-isotropic phase transition line can be achieved under certain conditions. The theoretical predictions are found to be in good qualitative agreement with available experimental results.