Microcrystalline domains of monolayer and multilayer BDN-SA Langmuir–Blodgett films

Monolayer and multilayer BDN(Bis(4-diethyannodithiobenzil)nickel)-SA(stearyl alcohol) LB (Langmuir–Blodgett) films were prepared and the characteristics of microcrystalline domains were studied using UV–vis.–NIR and AFM. The results indicate that BDN-SA LB films consist of numerous ball-like microcrystalline domains at size scales from a few tens to a few hundreds of nm. AFM images of a multilayer LB film show that well-ordered molecular arrangements exist on the surface of domains which resemble a mosaic structure. The relationship between the mean size of the domain of a BDN-SA LB film with the thickness of the film was also shown.     

Phage Langmuir monolayers and Langmuir–Blodgett films

Stable, insoluble Langmuir monolayer films composed of Staphylococcus aureus-specific lytic bacteriophage were formed at an air–water interface and characterized. The phage monolayer was very strong, withstanding a surface pressure of ～40 mN/m at 20 °C. The surface pressure–area (Π–A) isotherm possessed a shoulder at ～7 × 10⁴ nm²/phage particle, attributed to a change in phage orientation at the air–water interface from horizontal to vertical capsid-down/tail-up orientation as surface pressure was increased. The Π–A-dependence was accurately described using the Volmer equation of state, assuming horizontal orientation to an air–water interface at low surface pressures with an excluded area per phage particle of 4.6 × 10⁴ nm². At high pressures phage particles followed the space-filling densely packed disks model with a specific area of 8.5 × 10³ nm²/phage particle. Lytic phage monolayers were transferred onto gold-coated silica substrates from the air–water interface at a constant surface pressure of 18 mN/m by Langmuir–Blodgett method, then dried and analyzed by scanning electron microscopy (SEM) and ellipsometry. Phage specific adsorption (Γ) in Langmuir–Blodgett (LB) films measured by SEM was consistent with that calculated independently from Π–A isotherms at the transfer surface pressure of 18 mN/m (Γ = 23 phage particles/μm²). The 50 nm-thickness of phage monolayer measured by ellipsometer agreed well with the horizontal phage average size estimated by SEM. Surface properties of phage Langmuir monolayer compare well with other monolayers formed from nano- and micro-particles at the air–water interface and similar to that of classic amphiphiles 1,2-diphytanoyl-sn-glycero-3-phosphocholine (phospholipid) and stearic acid.     

Langmuir–Blodgett films of octadecanethiol on gold sols subphase

An octadecanethiol monolayer was formed on an aqueous gold sols subphase, it’s LB films were characterized by means of π-A isotherms, TEM (transmission electron microscopy), XRD (X-ray diffraction) and UV–Vis spectroscopy.     

Effect of pH on the control of molecular orientation in monolayer of bent-core liquid crystal materials by Langmuir–Blodgett method

Control of molecular orientation at the substrate surface is significant to understand the surface science. Langmuir films of bent-core liquid crystals having alkyl chains at both ends were deposited on silicon substrate. Studies were carried out on air–water interface by changing pH of the subphase. On compression, molecules were arranged in stacks at high pH where as uniform monolayer was formed at lower pH. Limiting area increased at low pH, which resulted in the formation of monolayer after attaining a sustainable surface pressure. Langmuir films were transferred to silicon substrate, and atomic force microscopy images showed appropriate height profiles.     

From Langmuir–Blodgett films to single molecules

The author recollects his time in the group of D. Möbius in 1985–1986, within the department headed by Hans Kuhn, and the influence of Kuhn's concept of molecular assembly in the gestation of the first single-molecule experiments. He then briefly surveys the recent applications of single-molecule spectroscopy to complex and heterogeneous systems. In particular the field of single-molecule microscopy in membranes and at biological interfaces is now strongly growing, closing the circle back to Langmuir films, the systems which led to the development of single-molecule optical techniques.     

Immobilization of DNA on a glassy carbon electrode based on Langmuir–Blodgett technique: application to the detection of epinephrine

A double-stranded (ds) DNA-octadecylamine Langmuir–Blodgett film was attached to the surface of glassy carbon electrode (GCE) to create a novel voltammetric sensor (DNA-LB/GCE) for epinephrine (EP). Atomic force microscopy and electrochemical impedance spectroscopy were employed to study the characteristic of the DNA-LB film. The electrochemical behavior of EP at the modified electrode was investigated in pH 6.0 phosphate buffer solutions by cyclic voltammetry and amperometric methods. Compared with bare GCE, the DNA-LB/GCE sensor demonstrated an electrocatalytic effect on the oxidation of EP. In addition, the sensor shows excellent selectivity for EP detection, being free of interference from excess ascorbic acid and uric acid, and the method was also applied successfully to detect EP in the human urine samples.     

Magnetic–fluorescent Langmuir–Blodgett films of fluorophore-labeled ferritin nanoparticles

We have covalently coupled fluorophore 4-(2-hydroxyethoxy)-7-nitro-2,1,3-benzoxadiazole (NBD) to the external ferritin shell through lysine residues. An increase in the luminescence quantum yield of the fluorescent ferritin particles and a blue shift in its emission peak compared to individual fluorophore were observed. The study of the particles by transmission electron microscopy showed that the native iron core ferritin is intact and that no degradation occurs during chemical functionalization of the protein shell. The NBD-labeled ferritin particles are water soluble, which allowed their controlled deposition by the Langmuir–Blodgett (LB) technique. Superparamagnetic and fluorescent properties of the particles are preserved within the LB film.     

Effects of substrate on the melting behavior of Cd arachidate Langmuir–Blodgett films

Nineteen monolayered Cd arachidate films were deposited on float glass substrate coated with Si and Ni over-layers. Two layers have been chosen with very different surface free energies. Melting behavior of films were studied using variable temperature X-ray specular reflectivity and Fourier transform infrared spectroscopy measurements. In conformity with earlier studies, melting of the multilayer precede by a transition from distorted hexagonal to hexaticlike phase. However, the transition temperature to hexaticlike phase as well as the melting temperature depend significantly on the type of layer. Both the transition temperatures are higher for the multilayer deposited on Ni layer as compared to those for the film deposited on Si layer. These results can be understood in terms of different surface free energies of Ni and Si layers. Further, in case of Ni layer, transition to hexaticlike phase is relatively sharper. Even in the molten state there is a significant difference in the structure of the Cd arachidate film on two layers; packing density of molecules in molten state is lower in case of substrate with higher surface free energy. These results suggest that the surface free energy of substrate plays a significant role in melting behavior of Langmuir–Blodgett films.     

Porphyrin–TiO2 nanoparticle heterostructure assembly by Langmuir–Blodgett method

Surface pressure–area (π–A) isotherm characteristics of 5,10,15-(4-hydroxyphenyl)-20-(4-hexadecyloxyphenyl) porphyrin monolayers on both the water and TiO₂ hydrosol subphases, the UV–vis absorption and fluorescence spectra of the monolayers deposited onto CaF₂ substrates are investigated. π–A isotherms find that the porphyrin ring extends to lie more flat on a TiO₂ hydrosol surface than on a water surface. The UV–vis absorption spectra of the deposited monolayers prove that the porphyrin TiO₂ nanoparticle heterostructure assembly is formed, in which the J-aggregated effect of porphyrin is weakened, comparing with that in the monolayer deposited from water subphase. The fluorescence spectra show that the fluorescent emission quenching by the photoinduced electron transfer from the excited porphyrin molecule to TiO₂ nanoparticle, occurs under excitation in the Soret band region of porphyrin.     

Analysis of organic acids and phenols of interest in the wine industry using Langmuir–Blodgett films based on functionalized nanoparticles

A chemically modified electrode consisting of Langmuir–Blodgett (LB) films of n-dodecanethiol functionalized gold nanoparticles (S_DODAuNP-LB), was investigated as a voltammetric sensor of organic and phenolic acids of interest in the wine industry. The nanostructured films demonstrated interfacial properties being able to detect the main organic acids present in grapes and wines (tartaric, malic, lactic and citric). Compared to a bare ITO electrode, the modified electrodes exhibited a shift of the reduction potential in the less positive direction and a marked enhancement in the current response. Moreover, the increased electrocatalytic properties made it possible to distinguish between the different dissociable protons of polyprotic acids. The S_DODAuNP-LB sensor was also able to provide enhanced responses toward aqueous solutions of phenolic acids commonly found in wines (caffeic and gallic acids). The presence of nanoparticles increased drastically the sensitivity toward organic acids and phenolic compounds. Limits of detection as low as 10⁻⁶ mol L⁻¹ were achieved. Efficient catalytic activity was also observed in mixtures of phenolic acid/tartaric in the range of pHs typically found in wines. In such mixtures, the electrode was able to provide simultaneous information about the acid and the phenol concentrations with a complete absence of interferences.     

Induced Collapse in the Formation of Alternating Langmuir–Blodgett Films

Two compounds whose molecules have large dipole moments, strereoregular perfluorinated alkylmethacrylate-co-methacrylic acid (A) and p-octadecylaminoazobenzene-p"-sulfamide (B), were used to assemble Langmuir–Blodgett polar films by the alternating method to achieve high polarization. According to estimates, the dipole moment of the dimeric unit of copolymer A is equal to about 4 D, the dipole moment of compound B, to 12 D. Unusually high (several units) transfer ratio was observed for the monolayer B when preparing the structures of (AB) _n type. The monolayers were stable during their formation process. Upon the pause of a substrate when passing through the monolayer B, the monolayer area remained strictly constant. According to the model proposed, the monolayer looses its stability and locally collapses in the meniscus zone at the contact line of the monolayer B and substrate due to an increase in the electrostatic repulsion between the dipoles of molecules B. The validity of this model is confirmed by the data of small-angle X-ray diffraction and atomic force microscopy for various alternating Langmuir–Blodgett films.     

An infrared study on Langmuir–Blodgett films of octadecylammonium octadecanoate: FWHM and the vibrational coupling

The monolayer of the mixture of octadecanoic acid and octadecylamine with molar ratio 1:1 has been investigated at the air–water interface. It was found that the monolayer shows a rather stable state at the surface pressure of 30 mN/m and this monolayer can be transferred onto a CaF₂ plate by Langmuir–Blodgett (LB) technique. The infrared spectra of LB films indicated that octadecylammonium octadecanoate is formed by an intermolecular proton exchange between adjacent carboxylic and aminic groups (COO⁻ and NH₃⁺). In three-layer LB film, the CH₂ scissoring mode of the long hydrocarbon chains of octadecylammonium octadecanoate shows a broad band feature at about 1468 cm⁻¹ while this vibrational mode of three-layer LB film of the mixture (1:1) of deuterated stearic acid and octadecylamine (octadecylammonium octadecanoate-d35, C₁₈H₃₇NH₃⁺C₁₇D₃₅COO⁻) only shows a narrow band. The broad feature of the CH₂ scissoring mode in octadecylammonium octadecanoate probably originates from the coupling between the chain of stearic acid and that of octadecylamine while this kind of coupling could be completely removed in octadecylammonium octadecanoate-d35. Another conclusion presented in this paper is that there are no couplings among the chains of fatty acid or among the chains of octadecylamine in LB films of octadecylammonium octadecanoate.     

Direct colorimetric study on the interaction of Escherichia coli with mannose in polydiacetylene Langmuir–Blodgett films

The membranes of polydiacetylene backbone decorated with mannose assembled by Langmuir–Blodgett technology can interact with Escherichia coli. The interactions lead to the color transition of the membranes which was readily visible to the naked eyes and could be quantified by visible absorption spectroscopy. To understand the mechanism of the chromatic transition, the affinochromism properties of polydiacetylene were examined by resonance Raman spectroscopy. The results demonstrated that the side chains of polymer backbone performed rearrangement, and the electronic structure in the polymer backbone changed from acetylene to butatriene form when the chromatic transformation from blue to red. The direct colorimetric detection by polydiacetylene membranes not only opens a new path for the use of these membranes in the area of biosensor development but also offers new possibilities for diagnostic applications and screening for binding ligand.     

Surface plasmon resonance research on photoinduced switch properties of liquid crystalline azobenzene polymer Langmuir–Blodgett films

We report a novel phenomenon of photoisomerization-induced switch properties in liquid crystalline azo-benzene polymer poly{2-hydroetheyl methacrylate}-co-{6-[4-(S-2-methyl-1-butyloxycarbonylphenylazo) phenoxy]hexyl methacrylate} Langmuir–Blodgett (LB) monolayers. These monolayers were deposited on gold film and irradiated with UV (360 nm) and blue (450 nm) light. The switch properties were investigated by the surface plasmon resonance (SPR) technique. A method called photoinduced patterning was used for the fabrication of a model molecular device. It has been found that the photoinduced process of writing and erasing in such devices can be repeated for tens of cycles.     

Electrocatalytic oxidation of alcohols on carbon electrodes modified by functionalized polypyrrole–RuO2 films

The electrocatalytic activity of several types of polypyrrole films bearing cationic pendant group [tris(bipyridyl)ruthenium(II) complexes, viologen, ammonium] and containing dispersed microparticles of RuO₂ towards the oxidation of alcohols to aldehydes or ketones has been investigated. Best results are obtained with polypyrrole films substituted by a tris(bipyridyl)ruthenium(II) complex, the latter acting as an electron relay for the electrogeneration of the strong oxidizing species RuO₄²⁻. The influence of several parameters such as base, supporting electrolyte, electrolysis potential and catalyst amount on the efficiency of the electrocatalysis has been examined. Under optimum conditions a maximum turnover of 10 900 was reached. In all cases the lifetime of these electrode materials was limited by the slow release of the RuO₄²⁻ species.     

Interactions between Langmuir–Blodgett Polymer Monolayers Studied with the Surface Force Apparatus

Langmuir–Blodgett monolayers from end-functionalized polyisoprene (PI–X) were studied in a surface force apparatus (SFA) as a model of a highly stretched brush melt. After deposition on a freshly cleaved mica, two identical brush monolayers (with surface area per molecule of about 170 Ų) were brought into adhesive contact in the SFA; then kinetic changes in the film thickness and the topography of the contact were continuously monitored. We observed spontaneous thinning of the brush melt bilayer. This effect can be attributed to the enhanced lateral motion of the sticking end-groups under the contact induced pressure. The possible model describing kinetic changes in the film thickness is presented. The behavior of the two opposing brush melts and a single brush monolayer in contact with two mica surfaces was compared. Molecular mechanisms involved in the rearrangements of brush melts are proposed for both systems.     

Composite Langmuir–Blodgett (LB) films of polyaniline and cadmium stearate

Composite monolayers of cadmium stearate and polyaniline processed with camphor sulphonic acid have been obtained at the air–water interface and subsequently transferred onto substrates as uniform Langmuir–Blodgett multilayers. Pressure–area (Π-A) isotherm studies indicated that polyaniline molecules are not squeezed out of the cadmium stearate matrix during compression or in the compressed state. Monolayer stability is seen to decrease when the polymer content is increased beyond 60% (in weight) which is probably associated with the formation of microaggregates that also affected the monolayer surface potential at large areas per molecule. With increasing amount of polyaniline in the mixture, a transition from Y-type to Z-type deposition has been observed. Transferred multilayer LB films were characterized by UV-vis, FTIR, XRD, surface potential, and dc electrical conductivity measurements. UV-vis results indicated that though the polyaniline was in the doped state in the spreading solution, the transferred films were in the emeraldine base state. FTIR studies revealed that the transferred films mainly contained cadmium stearate salt in addition to polyaniline. XRD results indicated that the stacking order is dependent on the polyaniline content in the composite films, the order was found to decrease upon increasing the polymer amount. The uniformity of transferred films was confirmed by surface potential studies. A possible packing arrangement in these composite Langmuir and Langmuir–Blodgett films has been proposed.     

Optical,electrical, and thermochromic properties of polyazothiophene Langmuir–Blodgett films

The conductivity and luminescence of conjugated polymers may be combined with the photoisomerization capability of azobenzene materials to achieve unique properties for a variety of applications, particularly if conjugated polymers with azobenzene side chains are processed as nanostructured films. In this study, we report on Langmuir–Blodgett (LB) films of a polythiophene-bearing azobenzene moieties, which displayed photoluminescence, thermochromism, electroactivity, and photoinduced birefringence. The latter three properties were enhanced in the LB films, as compared to spin-coated films of the polyazothiophene, and this has been attributed to differences in film morphology that could be probed with atomic force microscopy.     

Effects of silver nanoparticles doping on morphology and luminescence behaviour of ferroelectric liquid crystals Langmuir–Blodgett films

We report the deposition of Langmuir–Blodgett (LB) thin films of low-weight dispersed composite systems of ferroelectric liquid crystals (FLCs)–functionalised silver (Ag) nanoparticles. Because of their amphiphilic nature the molecules form stable Langmuir monolayers, which were transferred to silicon substrates. We noticed that absorption wave numbers are present for each bond constituting FLC–nanoparticles composite system, ensuring a complete transfer of molecules from water sub-phase. XRD showed intense peaks at 2θ = 3.2° due to the layer structure of FLC molecules. We infer from the morphology of LB films that doping of nanoparticles do not provide any hindrance to SmC* layer structure of FLC molecules. The photoluminescence study indicates blue shift in emission spectra and peak intensity increases with Ag nanoparticles concentration.