无配体Pd/LDH-F催化剂在Heck和Suzuki反应中的应用

 以氟离子插层的水滑石LDH-F为载体,用逐滴浸渍法制备了新型Pd/LDH-F催化剂,并用其催化溴代芳烃的Heck和Suzuki偶联反应. 用X射线衍射表征了催化剂的晶相,以等离子体发射光谱测定了溶剂中钯的流失量. 结果表明,对于Heck反应,在无配体存在和低钯用量(Pd/溴代芳烃摩尔比为0.001)的情况下, Pd/LDH-F的催化性能优于其它载体负载的Pd催化剂,显示出很高的催化活性和选择性. 在140 ℃和12 h的条件下, Pd/LDH-F催化溴苯与苯乙烯Heck反应产物的收率可达86％, 反应后催化剂经过分离,可循环使用四次其催化活性基本不变. 在DMF/水摩尔比为0.5的混合溶剂中,在室温和3 h 的条件下, Pd/LDH-F (Pd/溴代芳烃摩尔比为0.005)催化溴苯与苯基硼酸盐的Suzuki反应中,目标产物收率为99%.     

Layered double hydroxide supported nanopalladium catalyst for Heck-, Suzuki-, Sonogashira-, and Stille-type coupling reactions of chloroarenes

Layered double hydroxide and Merrifield resin supported nanopalladium(0) catalysts are prepared by an exchange of PdCl(4)(2-) followed by reduction and well characterized for the first time. The ligand-free heterogeneous layered double hydroxide supported nanopalladium (LDH-Pd(0)) catalyst using the basic LDH in place of basic ligands indeed exhibits higher activity and selectivity in the Heck olefination of electron-poor and electron-rich chloroarenes in nonaqueous ionic liquids (NAIL) over the homogeneous PdCl(2) system. Using microwave irradiation, the rate of the Heck olefination reaction is accelerated, manifold with the highest turnover frequency ever recorded in the case of both electron-poor and electron-rich chloroarenes. The basic LDH-Pd(0) shows a superior activity over a range of supported catalysts, from acidic to weakly basic Pd/C, Pd/SiO(2,) Pd/Al(2)O(3), and resin-PdCl(4)(2-) in the Heck olefination of deactivated electron-rich 4-chloroanisole. The use of LDH-Pd(0) is extended to the Suzuki-, Sonogashira-, and Stille-type coupling reactions of chloroarenes in an effort to understand the scope and utility of the reaction. The catalyst is quantitatively recovered from the reaction by a simple filtration and reused for a number of cycles with almost consistent activity in all the coupling reactions. The heterogeneity studies provide an insight into mechanistic aspects of the Heck olefination reaction and evidence that the reaction proceeds on the surface of the nanopalladium particles of the heterogeneous catalyst. TEM images of the fresh and used catalyst indeed show that the nanostructured palladium supported on LDH remains unchanged at the end of the reaction, while the XPS and evolved gas detection by TGA-MS of the used catalyst identify ArPdX species on the heterogeneous surface. Thus, the ligand-free nanopalladium supported on LDH, synthesized by the simple protocol, displays superior activity over the other heterogeneous catalysts inclusive of nanopalladium in the C-C coupling reactions of chloroarenes.     

Genesis of coordinatively unsaturated palladium complexes dissolved from solid precursors during Heck coupling reactions and their role as catalytically active species

The Forum Article critically summarizes investigations and discussions on the nature and role of potential active species in C-C coupling reactions of the Heck type using catalyst systems with "ligand-free" inorganic salts, simple inorganic complexes, and supported and nonsupported (colloidal) Pd particles. From a series of experiments and reports, it can be concluded that the "active species" is generated in situ in catalytic systems at higher temperature conditions (>100 degrees C). In all heterogeneous systems with solid Pd catalysts, Pd is dissolved from the solid catalyst surface under reaction conditions by a chemical reaction (complex formation and/or oxidative addition of the aryl halide), forming extremely active coordinatively unsaturated Pd species. Pd is partially or completely redeposited onto the support at the end of the reaction when the aryl halide is used up. The Pd dissolution-redeposition processes correlate with the reaction rate and are strongly influenced by the reaction conditions. Skilled preparation of the catalyst and careful adjustment of the reaction conditions allowed the development of highly active heterogeneous catalysts (Pd/C, Pd/metal oxide, and Pd/zeolite), converting aryl bromides and aryl chlorides in high yields and short reaction times. Reaction conditions have been developed allowing the conversion of bromobenzene with turnover numbers (TONs) of 10(7) and even of unreactive aryl chlorides (chlorobenzene and chlorotoluene) in high yields with simple "ligand-free" Pd catalyst systems like PdCl2 or Pd(OH)2 in the absence of any organic ligand. Simple coordinatively unsaturated anionic palladium halide (in particular, bromo) complexes [PdXn](m-) play a crucial role as precursor and active species in all ligand-free and heterogeneous catalyst systems and possibly in Heck reactions at all.     

Mizoroki-Heck coupling using immobilized molecular precatalysts: leaching active species from Pd pincers, entrapped Pd salts, and Pd NHC complexes

The Mizoroki-Heck reaction is a palladium-catalyzed reaction of both practical importance and scientific significance. Two challenges currently faced by practitioners of the Heck and other palladium-catalyzed coupling reactions are (i) minimizing the costs associated with this reaction by developing high TON catalysts or facilitating catalyst recovery and (ii) elucidating the nature of the active species when using various different precatalysts. These two challenges, one practical and one fundamental, served as our motivation in our studies of immobilized molecular palladium(II) complexes as precatalysts in Mizoroki-Heck reactions. This Forum Article describes our investigations in this area, highlighting our approach to the elucidation of the active catalyst by combining kinetic and poisoning studies of several different related precatalysts, our development of new, selective catalyst poisons, and our quest for stable, recyclable supported Heck, Suzuki, and Sonogashira coupling catalysts. Under high-temperature conditions (120 degrees C), all precatalysts studied are conclusively shown to decompose, liberating soluble, active palladium(0) species that are the true catalysts. Techniques for the elucidation of the nature of the truly active Pd species are enumerated.     

Catalytic activity of palladium supported on single wall carbon nanotubes compared to palladium supported on activated carbon Study of the Heck and Suzuki couplings, aerobic alcohol oxidation and selective hydrogenation

Nanoparticles (2–10 nm) of palladium have been deposited on single wall carbon nanotubes (SWNT) by spontaneous reduction from Pd(OAc)₂ or from oxime carbapalladacycle. These catalysts exhibit higher catalytic activity than palladium over activated carbon (Pd/C) for the Heck reaction of styrene and iodobenzene and for the Suzuki coupling of phenylboronic and iodobenzene. This fact has been attributed as reflecting the dramatic influence of the size particle on the activity of the palladium catalyst for CC bond forming reactions as compared to other reaction types less demanding from the point of view of the particle size. Thus, in contrast to the Heck and Suzuki reactions, Pd/C is more active than palladium nanoparticles deposited on SWNT for the catalytic oxidation by molecular oxygen of cinnamyl alcohol to cinnamaldehyde and for the hydrogenation of cinnamaldehyde to 3-phenylpropionaldehyde.     

纳米碳纤维负载钯催化剂在Heck反应中的应用——载体相互作用的影响

使用多元醇还原法制备了均匀分散的钯纳米颗粒.将钯纳米颗粒负载于板式、鱼骨式和管式纳米碳纤维,得到稳定、可重复使用的非均相催化剂.实验结果表明,钯纳米胶粒同载体之间的电位差对钯在载体上的负载量、粒子大小以及Heck反应中钯的溶失量有很大的影响.在制备过程中,增加钯纳米胶粒同纳米碳纤维表面的电位差能够大大降低钯在Heck反应中的流失.催化剂的反应活性随钯粒子的增大而降低.     

Design of highly active heterogeneous palladium catalysts for the activation of aryl chlorides in Heck reactions

In situ generation of highly active palladium species by intermediate dissolution of Pd from solid supported catalysts has been demonstrated to be a very successful approach for the activation of aryl chlorides in Heck reactions. The new ‘heterogeneous’ Pd catalysts act as reservoir for molecular Pd species with unsaturated coordination sphere in solution. Crucial Pd leaching and re-deposition onto the support can be controlled by optimization of reaction conditions and by the properties of the catalysts. Pd is re-deposited onto the support at the end of the reaction. The catalysts, palladium supported on activated carbon, on various metal oxides or fluorides and Pd complexes in zeolites, are easy to prepare, though the preparation conditions are crucial. The catalysts convert all aryl bromides completely within minutes (TON 100,000). Aryl chlorides (even deactivated ones) are converted with high yields, within 2-6 h. The catalysts belong to the most active ones in Heck reactions at all (including best homogeneous systems) and fulfill all relevant requirements for practical applications in laboratory and industry.     

胺基化树脂负载Pd(0)对Heck反应催化性能的研究

将氯球用胺化剂、乙二胺、胍进行胺化后负载氯化钯, 在乙醇溶液中用硼氢化钾还原, 制备了含胺功能基树脂负载钯(0)的催化剂; 研究了催化剂对含各种取代基碘代苯与丙烯酸的Heck芳基化反应催化性能. 结果表明, 该类催化剂具有良好的催化活性和重复使用性能, 其中用乙二胺功能化树脂负载的Pd(0)催化剂在90 ℃重复使用17次时能保持良好的催化活性. 催化剂反应前后的SEM形貌图和过滤液的活性试验表明催化剂活性组分Pd(0)在反应中有沥取(leaching)现象.     

Preparation and Catalytic Performance of Carbon Nanotube Supported Palladium Catalyst

Two carbon nanotube supported palladium catalysts were prepared using a chemical reduction technique (Pd/CR‐CNT) and a conventional impregnation method (Pd/CNT) respectively, and their catalytic performances for Heck reaction were investigated. The catalysts were characterized by TEM and XPS techniques and the products were characterized by ¹H NMR. Research results showed that the (Pd/CR‐CNT) catalyst showed a better catalytic activity than the (Pd/CNT) catalyst, owing to better dispersion of palladium nanoparticles and stronger interaction between the active palladium species and carbon nanotube. Meanwhile, the product yield maintained 99.93% of its initial value at five‐times re‐use, compared with that at the first time use. The catalyst prepared with the chemical reduction method represented a better reusing performance.     

Synthesis of chitosan derivatives supported palladium complexes and their catalytic behavior in the Heck reaction

Two kinds of chitosan derivatives, crosslinked chitosan and crosslinked chitosan condense with salilylaldehyde, supported palladium complexes (CL‐CTS‐Pd and CL‐S‐CTS‐Pd) were synthesized and characterized by X‐ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), differential thermal analysis (DTA), etc. These complexes are efficient catalysts for the Heck reaction under atmospheric conditions and can be easily recovered and reused. The detailed studies show that the catalyst CL‐S‐CTS‐Pd is much more efficient than CL‐CTS‐Pd under the same conditions. CL‐S‐CTS‐Pd keeps its catalytic activity in the Heck reaction of acrylic acid with iodobenzene even at a low temperature (60°C) or with tiny amounts of the catalyst (0.05 mol%Pd). Yields of making cinnamic acid were even as high as 75.3% in the Heck reaction of acrylic acid with iodobenzene using CL‐S‐CTS‐Pd that was recovered 10 times. Copyright © 2005 John Wiley & Sons, Ltd.     

Immobilization of palladium in mesoporous silica matrix: preparation, characterization, and its catalytic efficacy in carbon-carbon coupling reactions

Palladium(0) has been immobilized into the silica-based mesoporous material to develop catalyst Pd(0)-MCM-41, which is found to be highly active in carbon-carbon coupling reactions. [Pd(NH3)4]2+ ions have been incorporated into the mesoporous material during synthesis of MCM-41 and subsequently upon treatments with hydrazine hydrate Pd2+ ions present in mesoporous silica matrix were reduced to Pd(0) almost instantaneously. The catalyst has been characterized by small-angle X-ray diffraction, N2 sorption, and transmission electron microscopy (TEM). TEM and surface area measurements clearly demonstrate that the immobilization of Pd(0) into the mesoporous silica has a significant effect on pore structure of the catalyst. Nevertheless, after immobilization of palladium the meso-porosity of the material is retained, as evidenced in the nitrogen sorption measurement. The TEM micrograph shows that both MCM-41 and Pd(0)-MCM-41 have similar types of external surface morphology; however, Pd(0)-MCM-41 was less ordered. Pd(0)-MCM-41 showed high catalytic activity toward carbon-carbon bond formation reactions like Heck and Sonogashira coupling, as evidenced in high turn-over numbers. In contrast to many other Pd-based catalysts reported so far, Pd(0)-MCM-41 acts as a truly heterogeneous catalyst in C-C coupling reactions. Notably, the new heterogeneous catalyst is found to be efficient in the activation of arylchloride to give impressive conversion in cross coupling (15-45% for Heck and 30% for Sonogashira) reactions under mild conditions.     

Heck reaction catalyzed by PD-modified zeolites.

[Pd]-exchanged NaY zeolites have been prepared, characterized, and applied for the first time for catalytic carbon-carbon coupling reactions. The catalysts exhibit a high activity and selectivity toward the Heck reaction of aryl bromides with olefins for small palladium concentrations (< or =0.1 mol % of Pd). The catalysts can easily be separated from the reaction mixture and reused after washing without loss in activity. No limitation to the diffusion of adducts in the zeolite cages was observed (for linear alkenes). The electronic nature of the aryl bromides and the olefins has a dominating effect on the reaction yield and selectivity. The heterogeneous catalysts quantitatively convert all types of all aryl bromide (complete conversion of bromobenzene within 30 min) and activated aryl chlorides under standard reaction conditions. Product form selectivity is observed in the Heck reaction with cyclic olefins.     

Recyclable Polymer‐Supported Nanometal Catalysts in Water

Two types of polymer‐supported nanometal catalysts with high catalytic activity and recyclability in water have been developed. One catalyst was composed of linear polystyrene‐stabilized metal nanoparticles (PS‐MtNPs). A palladium catalyst (PS‐PdONPs) was prepared in water by the thermal decomposition of Pd(OAc)₂ in the presence of polystyrene. The degree of immobilization of Pd, but not the size of the Pd nanoparticles, was dependent on the molecular weight and cross‐linking of the polystyrene. The PS‐PdONPs exhibited high catalytic activity for Suzuki, Heck, and Sonogashira coupling reactions in water and they could be recycled without loss of activity. Linear polystyrene was also suitable as a stabilizer for in situ generated PdNPs and PtNPs. The second catalyst was a polyion complex that was composed of poly[4‐chloromethylstyrene‐co‐(4‐vinylbenzyl)tributylammonium chloride] and poly(acrylic acid)‐stabilized PdNPs (PIC‐PdNPs). Aggregation and redispersion of PIC‐PdNPs were easily controlled by adjusting the pH value of the solution.     

Highly active thermomorphic fluorous palladacycle catalyst precursors for the Heck reaction; evidence for a palladium nanoparticle pathway

[reaction: see text] The fluorous Schiff base p-Rf8(CH2)3C6H4C(=N(CH2)3Rf8)(CH2)2Rf8 (Rf8 = n-C8F17) is prepared in six steps from p-iodobenzaldehyde and then cyclopalladated (Pd(OAc)2) to give highly effective catalyst precursors for Heck reactions, conducted under homogeneous conditions (DMF, 80-140 degrees C, turnover numbers >10(6)) in the absence of fluorous solvents. Rate, recycling, and other data suggest that the palladacycles serve as sources of palladium nanoparticles, which are the dominant active catalysts.     

Phosphine-free polystyrene-supported palladium(II) complex as an efficient catalyst for the Heck and Suzuki coupling reactions in water

A palladium complex, 1-phenyl-1,2-propanedione-2-oxime thiosemi-carbazone-functionalized polystyrene resin supported Pd(II), is found to be a highly active catalyst for the Heck reaction of methyl acrylate with aryl halides and Suzuki reaction of phenylboronic acid with aryl iodides and bromides, giving excellent yields. The reactions were performed under phosphine-free conditions in an air atmosphere. The palladium catalyst is easily separated, and can be reused for several times without a significant loss in its catalytic activity.     

Application of Laser Induced Breakdown Spectroscopy as a Novel Approach for Monitoring of the Activity of Nano Palladium Catalyst as Compared to Two Well-known Methods

Catalyst deactivation is an unavoidable process that occurs in catalytic chemical reactions. Laser Induced Breakdown Spectroscopy (LIBS) is used here as a novel approach to investigate the activity of palladium supported with carbon catalyst (Pd/C) over the hydrogenation of cinnamic acid with tetralin. Their outputs for four catalyst samples are reported for different time intervals of 0, 5, 10, 15 min during the reaction. The results of LIBS analysis are compared to Inductively Coupled Plasma Mass Spectrometry (ICP-MS), which shows a good agreement. Experimental data specify that line intensities of palladium (Pd) are decreased significantly with an increment of the reaction time. Moreover, the Field Emission Scanning Electron Microscope with energy dispersive spectroscopy (FESEM-EDS) of catalysts samples show aggregation of palladium particles for some places in the catalyst surface. The changes of Pd content and sintering of Pd particles in the catalyst during the reaction play substantial roles in catalyst deactivation.     

硅胶负载钯: 一种新型有效而可循环的Heck反应的催化剂

本文报道了一种新型硅胶负载钯催化剂在Heck 反应中的应用。在硅胶负载钯催化剂,碳酸钾为碱,DMF为溶剂的反应条件下（无膦和无游离胺的存在）,碘代芳烃、溴代芳烃和活泼的氯代芳烃与烯烃发生偶联反应生成高产率相应的偶联产物。而且硅胶负载的钯催化剂经简单处理,可循环使用6次不降低活性。     

乙二胺功能化树脂负载Pd(0)配合物：可重复使用的高活性Heck芳基化催化剂

The ethylenediamine-functionalized resin-supported Pd(0)complex was prepared from PdCl_2 and ethylenedia-mine-functionalized chloromethylated polystyrene,followed by reduction with KBH_4.The complex was character-ized by FT-IR,XRD,BET,SEM and EDS.The resin-supported catalyst exhibited high catalytic activity in theHeck reaction and could be reused up to 17 times in NMP or 16 times in DMF at 90 ℃ in the Heck reaction of io-dobenzene with acrylic acid.The leaching investigation disclosed that the palladium leaching was caused by the in-teraction of iodobenzene with the metal Pd(0)on supported catalyst.The leached palladium species in filtrate wasvery stable and could be reused five times after the solid catalyst was filtered off.A cross-transfer test in recyclingin the presence of additional carbon disclosed that the soluble leached palladium species had much higher catalyticactivity than supported and/or adsorbed palladium in solid-solution heterogeneous Heck reaction.     

Complete Oxidation of Methane Alumina Modified with Calcium, over Palladium Supported on Lanthanum, and Cerium Ions

The activity and thermal stability of Pd/Al2O3 and Pd/（Al2O3＋MOx） （M=Ca, La, Ce） palladium catalysts in the reaction of complete oxidation of methane are presented in this study. The catalyst supports were prepared by sol-gel method and they were dried either conventionally or with supercritical carbon dioxide. Then they were impregnated with palladium nitrate solution. The catalysts with unmodified alumina had a high surface area. The activity and thermal stability of the aluminasupported catalyst was also very high. The introduction of calcium, lanthanum, or cerium oxide into alumina support caused a decrease of the surface area in the way dependent on the support precursor drying method. These modifiers decreased the activity of palladium catalysts, and they required higher temperatures for the complete oxidation of methane than unmodified Pd/Al2O3. The improvement of the palladium activity by lanthanum and cerium support modifier was observed only at low temperatures of the reaction.     

Palladiumimmobilized on chitosan nanofibers cross-linked by glutaraldehyde as an efficient catalyst for the Mizoroki–Heck reaction

Nonwoven chitosan (CS) nanofiber mats were successfully prepared by the electrospinning of the mixture of CS and poly(ethylene oxide) (PEO) in acetic acid aqueous solution. The CS/PEO fiber mats were treated with glutaraldehyde aqueous solution to stabilize fibers in solution. The concentration of glutaraldehyde is important for incorporating swelling properties in the cross-linked CS/PEO fiber mats. The cross-linked CS/PEO fibers (CCS/PEO fibers) were then used as supports for palladium catalysts in the Mizoroki–Heck reaction. The results of the study demonstrated that the catalytic activities of Pd catalyst supported on CCS/PEO fiber (Pd-CCS/PEO fiber) were highly dependent on the concentration of glutaraldehyde in the cross-linking process. Density functional theory (DFT) calculations indicated that the Schiff bond formed between CS and glutaraldehyde could reduce the energy needed to form a chelate complex between the CCS/PEO fibers and palladium active species. This in turn could decrease the activation energy of the Mizoroki–Heck reactions which occur in the presence of the Pd-CCS/PEO fiber catalysts. The optimized Pd-CCS/PEO fiber catalyst was very efficient and stable in the Mizoroki–Heck reaction of aromatic iodides with olefins.