Cosolvent gel-like materials from partially hydrolyzed poly(vinyl acetate)s and borax

A gel-like, high-viscosity polymeric dispersion (HVPD) based on cross-linked borate, partially hydrolyzed poly(vinyl acetate) (xPVAc, where x is the percent hydrolysis) is described. Unlike hydro-HVPDs prepared from poly(vinyl alcohol) (PVA) and borate, the liquid portion of these materials can be composed of up to 75% of an organic cosolvent because of the influence of residual acetate groups on the polymer backbone. The effects of the degree of hydrolysis, molecular weight, polymer and cross-linker concentrations, and type and amount of organic cosolvent on the rheological and structural properties of the materials are investigated. The stability of the systems is explored through rheological and melting-range studies. (11)B NMR and small-angle neutron scattering (SANS) are used to probe the structure of the dispersions. The addition of an organic liquid to the xPVAc-borate HVPDs results in a drastic increase in the number of cross-linked borate species as well as the agglomeration of the polymer into bundles. These effects result in an increase in the relaxation time and thermal stability of the networks. The ability to make xPVAc-borate HVPDs with very large amounts of and rather different organic liquids, with very different rheological properties that can be controlled easily, opens new possibilities for applications of PVAc-based dispersions.     

Colloidal Properties of Aqueous Poly(vinyl acetate)–Borate Dispersions with Short‐Chain Glycol Ethers

We report the influence of adding five short‐chain glycol ethers (SCGEs) on the structure, stability, and viscoelastic properties of aqueous dispersions of partially hydrolyzed poly(vinyl acetate) and borax. The properties of these gel‐like materials have been investigated as a function of the structure of the added SCGE both below and above the critical aggregation (or micellar) concentrations using ¹¹B and ¹³C NMR, rheology, and small‐angle neutron scattering. The results indicate that the SCGE aggregation behavior is not affected by incorporation into the gel‐like network. However, changes in the viscoelasticity and structural properties of the dispersions were detected that can be correlated to the nature of the solvent system. Also, the ability of these materials to clean an unvarnished acrylic paint surface coated with synthetic soil has been evaluated using colorimetery, and the surface of the dispersion after cleaning was visualized with scanning electron microscopy.     

Grafting reactions of vinyl acetate onto poly[(vinyl alcohol)-co-(vinyl acetate)]

The grafting preference of vinyl acetate onto the methine carbon of poly(vinyl alcohol) (PVOH) versus the acetate group of poly(vinyl acetate) (PVAc) was determined as part of an attempt to prepare novel branched PVOH from partially hydrolyzed PVAc. The results showed long chain grafting on the acetate groups of the PVAc units rather than the methine carbons of the PVOH or PVAc units. Decreasing the monomer or initiator concentration decreased the molecular weight of the graft copolymer formed. Of the initiators studied, ammonium persulfate gave the largest increase in copolymer molecular weight. Both hydrolysis and reacetylation combined with gel permeation chromatography (GPC) and ¹³C-NMR of the fully hydrolyzed material were used to estimate the number and location of grafts. © 1996 John Wiley & Sons, Inc.     

Influence of hydrophobe on the release behavior of vinyl acetate miniemulsion polymerization

Poly(vinyl acetate) (PVAc) nanoparticles containing antibiotic have been prepared by miniemulsion polymerization. To compare the effect of hydrophobe types, hexadecane and poly(vinyl acetate) were used as hydrophobe. The particle characteristics as the manufacturing condition were examined by particle size analyzer. As a result, the diameter of PVAc latexes was adjusted between 80 and 260 nm by homogenization conditions and amounts of surfactant. Also, the miniemulsion by using hexadecane showed the more long shelf stability and led to the more small particle size after polymerization, as compared with the case of using poly(vinyl acetate). This indicated that the use of poly(vinyl acetate) as a hydrophobe could not make the stable emulsion, but it could avoid volatile organic chemical problems in the final product. From the release profile of drug through UV spectra, the drug release was very slow and it could be seen that the release of drug encapsulated with PVAc was occurred with the polymer degradation.     

Reentrant behavior of poly(vinyl alcohol)–borax semidilute aqueous solutions

 The reentrant behavior of Poly(vinyl alcohol) (PVA)–borax aqueous semidilute solutions with a PVA concentration of 20 g/l and borax concentrations varies from 0.0 to 0.20 M was investigated using dynamic light scattering (DLS) and dynamic viscoelastic measurements. Two (fast and slow modes) and three (fast, middle, and slow) relaxation modes of PVA semidilute aqueous solutions without and with the presence of borax, respectively, were observed from DLS measurements. The fast and middle relaxation modes were q ²-dependent (q is the scattering vector) characteristic of diffusive behavior; however, the slow modes were q ³-dependent, characteristic of intraparticle dynamics. The experimental results showed that the slow relaxation mode dominates the DLS relaxation. The DLS slow mode relaxation time, τ_s, and the viscoelastic modulus G′(ω) and G′′(ω) data had a similar trend and demonstrated reentrant behavior as the borax concentration was increased from 0.0 to 0.20 M, i.e. τ_s, G′(ω), and G′′(ω) fluctuated with increasing borax concentration. The excluded-volume effect of polymers, charge repulsion among borate ions bound on PVA molecules, and intermolecular cross-linking didiol–borate complexation caused an expansion of the polymer chain; however, the screening effect of free Na⁺ ions on the negative charge of the borate ions bound on PVA and intramolecular cross-linking didiol–borate complexation led to a shrinkage of the polymer chain. The reentrant behavior was the consequence of the balance between expansion and shrinkage of the PVA–borate complex. Received: 26 March 1999/Accepted in revised form: 3 September 1999     

Oriented array of polyethylene-block-poly(ethylene oxide) nanoplatelets in unsaturated polyesters cross-linked coatings

Transparent coatings of cross-linked unsaturated polyester (UP) containing staggered platelets of polyethylene-block-poly(ethylene oxide) with their normal perpendicular to the substrate have been readily prepared by a solvent assisted spin-coating method. For this purpose, homogeneous liquid dispersions of block copolymer platelets in liquid UP resin have been prepared using a selective solvent, deposited onto flat substrates by spin-coating and converted into a transparent solid layer by photochemical cross-linking. Although such stratified morphology has been already reported for inorganic nanoplatelets (typically clay particles), we report for the fist time the formation of such stratified morphology in fully organic system. The shear-induced origin of this organization has been confirmed by the rheological properties of the uncured systems where a pronounced non-Newtonian behavior has been observed.     

Synthesis and Characterization of a Diblock Copolymer of Methyl Methacrylate and Vinyl Acetate by Successive Photo‐Induced Charge Transfer Polymerization Using Ethanolamine as the Parent Compound

Communication: A diblock copolymer consisting of poly(methyl methacrylate) (PMMA) and poly(vinyl acetate) (PVAc) with hydroxyl group at one end is prepared by successive charge transfer polymerization (CTP) under UV irradiation at room temperature using ethanolamine and benzophenone as a binary initiation system. The diblock copolymer PMMA‐b‐PVAc could be selectively hydrolyzed to the block copolymer of poly(methyl methacrylate) and poly(vinyl alcohol) (PVA) using sodium ethoxide as the catalyst. Both copolymers, PMMA‐b‐PVAc and PMMA‐b‐PVA, are characterized in detail by means of FTIR and ¹H NMR spectroscopy, and GPC. The effect of the solvent on CTP and the kinetics of CTP are discussed.     

Lipase specificity for the hydrolysis of poly (vinyl acetate)

The effect of lipases on the side chain hydrolysis of poly (vinyl acetate) (PVAc) was investigated in toluene by various lipases, Hog-pancreas (HP), Candida Rugosa (CR), Lipolase-100T (LL), and Novozyme 435 (NV) at 60 °C. Gas chromatographs and GC–MS spectra showed the presence of different ester side chains. The different size side chain esters in PVAc get hydrolyzed at different specific rates by the various lipases. Longer side chains are hydrolyzed in the order HP>NV>LL>CR whereas the short chains are hydrolyzed in the reverse order. A continuous distribution kinetics model was proposed that accounts for lipase deactivation and determines the rate coefficients of hydrolysis of various chain lengths. Lipase deactivation and hydrolysis rate coefficients were determined for each case. The proposed model predicts the experimental data satisfactorily.     

Preparation and characterization of a novel nanocomposite particles via in situ emulsion polymerization of vinyl functionalized silica nanoparticles and vinyl acetate

A new class of poly(vinyl acetate) (PVAc)/silica nanocomposite particles was successfully prepared in aqueous solution through a facile synthetic process. First, vinyl functionalized silica nanoparticles (VFSs) were synthesized using one-step method in aqueous emulsion, and then the vinyl groups located on the surface of VFSs were used to induced in situ polymerization of vinyl acetate. Scanning electron microscopy (SEM) images showed that VFSs and PVAc/silica nanocomposite particles all revealed highly monodispersed and uniform spheres. Especially, PVAc/silica nanocomposite particles obtained from transmission electron microscopy images presented an obvious core–shell structure, and the thickness of PVAc shell grafting on the surface of VFSs core was about 17 nm. In addition, the influence of the hydrolyzed and condensed time of vinyl triethoxysilane on the size and size distribution of VFSs was also investigated. The results of dynamic light scattering and SEM analysis indicated that the size and size distribution of VFSs decreased gradually with the extension of the reaction time from 6 to 48 h. Moreover, the structures and thermal properties of the samples were characterized via FT-IR and heat-flow DSC–TG.     

Anion receptor-coated separator for lithium-ion polymer battery

Anion receptor-coated separators were prepared by coating poly(ethylene glycol) borate ester (PEGB) as an anion receptor and poly(vinyl acetate) (PVAc) as a good adhesive material towards electrodes onto microporous polyethylene (PE) separators. Gel polymer electrolytes were fabricated by soaking them in an liquid electrolyte, 1 M LiPF₆ in EC/DEC/PC (30/65/5, wt.%). As the weight ratio of PEGB to PVAc in a coating layer increased, gel polymer electrolytes showed higher cationic conductivity and electrochemical stability. The cationic conductivity and electrochemical stability of the gel polymer electrolyte based on coated separator with PVAc/PEGB (2/5, weight ratio) could reach 2.8 × 10^–4 S cm^–1 and 4.8 V, respectively. Lithium-ion polymer cells (LiCoO₂/graphite) based on gel polymer electrolytes with and without PEGB were assembled, and their electrochemical performances were evaluated.     

影响高浓度氧化石墨烯分散液流变行为的重要因素及群体平衡动力学分析

氧化石墨烯(GO)片的基面和边缘上存在大量的含氧官能团,能很好地分散在水中,因而具有很好的加工性和广阔的应用前景。在较高浓度范围下,GO水分散液中存在着强烈的竞争性相互作用,从而对流变行为产生较大影响。在本文中,通过稳态、动态等流变实验以及理论分析,研究了pH值、温度和不同的有机溶剂对GO分散液流变行为的影响。结果表明,降低pH值、适当增加温度以及加入吡啶均可促进GO水分散液从粘弹性液体到凝胶态的转变。利用DLVO (Deryagin-Landau-Verwey-Overbeek)理论,探讨了GO片之间的范德华作用力以及双电层排斥作用的相互关系,及其对流变性能的影响。通过群体平衡模型(PBE)分析了GO分散液的屈服应力与体积分数的正相关关系。同时,通过蠕变和松弛实验发现,高浓度的GO分散液中结构变化及流变行为在很多方面与高聚物相似,利用Poyting-Thomson模型能较好地拟合其粘弹性行为。上述研究结果为深入研究复杂的GO分散体系提供理论支撑和实验依据。     

Study on surface hydrolytic kinetics of poly(vinyl acetate) grafted onto polyurethane film

Alkali catalytic hydrolysis of poly(vinyl acetate) (PVAc) grafting onto polyurethane film surface was a heterogeneous reaction. The hydrolysis was carried on the PVAc particle surface, and the concentration of the alkali in the system was tested by titration method. The kinetics of PVAc surface hydrolytic reaction was studied by simple second-order reaction model. From linear regression analysis of experimental data, we inferred that the activation energy (E _a ) and pre-exponential factor (A) of PVAc surface hydrolytic reaction were 70.7 ± 0.2 kJ mol^?1 and (5.7 ± 0.5) × 10¹² kg mol^?1 s^?1, respectively. The results of transmission electron microscopy stated that the apparent hydrolytic degree was 2.1% when the surface of PVAc particle hydrolyzed absolutely.     

A study of cryostructuring of polymer systems. 34. Poly(vinyl alcohol) composite cryogels filled with microparticles of polymer dispersion

Macroporous filled and unfilled poly(vinyl alcohol) (PVA) cryogels are produced by cryogenic treatment (freezing at ?20°C for 12 h followed by thawing at a rate of 0.03°C/min) of mixtures of an aqueous PVA solution and a full-component poly(vinyl acetate) (PVAc) dispersion or its individual components. The values of the elasticity modulus and fusion temperature are determined for obtained samples; their microstructure is studied by light microscopy of thin sections. It is shown that the effects that are induced by the incorporation of PVAc dispersion into the macroporous matrix of the PVA cryogel are due to the presence of both a discrete phase, i.e., solid PVAc microparticles, and ingredients of the liquid phase of the PVAc dispersion, mainly, urea. Therewith, the dispersed particles themselves serve as a reinforcing filler, i.e., increase the rigidity and (to a lesser extent) heat endurance of the cryogel, while urea, which possesses chaotropic properties and hinders the intermolecular hydrogen bonding of PVA chains, reduces the rigidity and heat endurance of the composites. As a result, the total effect is determined by the competition of differently directed influences of these components of PVAc dispersion and depends on its concentration in the resulting filled cryogel. It is also shown that PVAc microparticles are mainly entrapped in the gel phase of the macroporous matrix and form necklacelike aggregates, the cross-sectional areas and lengths of which depend on the degree of composite filling.     

致孔剂对HP（MA—VAc—MMA）载体孔结构的影响

以二乙烯苯和双丙烯酸多缩乙二醇酯为交联剂、聚醋酸乙烯酯（ＰＶＡｃ）或它与醋酸丁酯（ＢＡＣ）的混合物为致孔剂、ＢＰＯ为引发剂，用悬浮聚合随后水解的方法制得了部分水解聚（丙烯酸甲酯－醋酸乙烯酯－甲基丙烯酸甲酯）［ＨＰ（ＭＡ－ＶＡｃ－ＭＭＡ）］多孔载体，研究了ＰＶＡｃ及（ＰＶＡｃ＋ＢＡＣ）用量、分子量及混合比对ＨＰ（ＭＡ－ＶＡｃ－ＭＭＡ）孔结构的影响。结果表明，当ＰＶＡｃ的Ｍ＞２．５×１０５，ＰＶＡｃ／ＢＡＣ为２．３，用量为１０～２０％时，可制得孔隙率较高，孔径分布较窄，孔表面积较大的多孔载体。这种载体适用于微生物固定化。     

Block copolymers of poly(ethylene oxide) and poly(vinyl alcohol) synthesized by the RAFT methodology

A methodology for the synthesis of well‐defined poly(ethylene oxide)‐block‐poly(vinyl alcohol) (PEO‐b‐PVA) and PVA‐b‐PEO‐b‐PVA polymers was reported. Novel xanthate end‐functionalized PEOs were synthesized by a series of end‐group transformations. They were then used to mediate the reversible addition–fragmentation chain transfer polymerization of vinyl acetate to obtain well‐defined poly(ethylene oxide)‐b‐poly(vinyl acetate) (PEO‐b‐PVAc) and PVAc‐b‐PEO‐b‐PVAc. When these block copolymers were directly hydrolyzed in methanol solution of sodium hydroxide, polymers with brown color were obtained, which was due to the formation of conjugated unsaturated aldehyde structures. To circumvent these side reactions, the xanthate groups were removed by adding a primary amine before hydrolysis and the products thus obtained were white powders. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy and FT‐IR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1901–1910, 2009     

Synthesis of high-molecular-weight poly(vinyl alcohol) with high yield by novel one-batch suspension polymerization of vinyl acetate and saponification

Generally, owing to tautomerism of vinyl alcohol monomer, poly(vinyl alcohol) (PVA) cannot be obtained by direct polymerization but it can be obtained by the saponification of poly(vinyl ester) precursors such as poly(vinyl acetate) (PVAc). In this study, to obtain high-molecular-weight (HMW) PVA with high yield through a one-batch method, we tried continuous saponification of PVAc prepared by suspension polymerization of vinyl acetate (VAc). We controlled various polymerization conditions, such as polymerization temperature, initiator concentration, suspending agent concentration, agitation speed, and VAc/water ratio, and obtained PVAc with a maximum conversion of VAc into PVAc of over 95-98%. PVA beads having various molecular parameters were prepared by continuous saponification of PVAc microspheres. Despite our employing a one-batch process, a maximum degree of saponification of 99.9% could be obtained. Continuous heterogeneous saponification of prepared PVAc yielded HMW PVA having a number-average degree of polymerization of 2,500-5,500, a syndiotactic diad content of 51-52%, and degree of saponification of 85.0-99.9%.     

Radiation induced graft polymerization of multi-walled carbon nanotubes for superhydrophobic composite membrane preparation

Highly soluble multi-walled carbon nanotubes (MWNTs) were prepared by radiation-induced free radical graft polymerization of vinyl acetate (VAc) onto pristine MWNT surfaces. High resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FTIR) spectroscopy, and micro-Raman spectroscopy were used to confirm that poly(vinyl acetate) (PVAc) had been successfully grafted onto the surface of the MWNTs. The effects of experimental parameters on the degree of grafting (DG) of PVAc were also investigated, including adsorbed dose, dose rate, initial monomer concentration, and solvents. The grafted MWNTs (MWNTs-g-PVAc) exhibited good solubility in common organic solvents at high mass fraction. In addition, a superhydrophobic composite membrane could be readily fabricated by vacuum filtration of MWNTs-g-PVAc onto a supporting membrane, as was confirmed by water contact angle testing and visualization by scanning electron microscopy.     

Grafting of Polymer Brushes from Xanthate-Functionalized Silica Particles

Monodisperse silica particles (SiPs) were surface-modified with a newly designed silane coupling agent comprising a triethoxysilane and an alkyl halide, namely, 6-(triethoxysilyl)hexyl 2-bromopropionate, which was further treated with potassium O-ethyl dithiocarbonate (PEX) to immobilize xanthate molecules on the particle surfaces. Surface-initiated macromolecular design via interchange of xanthates (MADIX) polymerization of vinyl acetate (VAc) was conducted with the xanthate-functionalized SiPs. The polymerization was well controlled and produced SiPs coated with poly(vinyl acetate) (PVAc) with a well-defined target molar mass and a graft density of about 0.2 chains nm⁻². Dynamic light scattering and TEM measurements revealed that the hybrid particles were highly dispersible in good solvents without any aggregation. The PVAc brushes were hydrolyzed with hydrochloric acid to produce poly(vinyl alcohol) brushes on the SiP surfaces. In addition, the number of xanthate molecules introduced on the SiP surfaces could be successfully controlled by adjusting the concentration of PEX. Thus, the SiPs have two functionalities: xanthates able to act as a MADIX chain-transfer agent and alkyl bromide initiation sites for atom transfer radical polymerization (ATRP). By using these unique bifunctional particles, mixed polymer brushes were constructed on the SiPs by MADIX of VAc followed by ATRP of styrene or methyl methacrylate.     

Non-aqueous PVAc dispersions prepared in a reactive epoxy functionalized PDMS liquid medium

The system vinyl acetate (VAc)/poly(dimethylsiloxane) diglycidylether (PDMS-DGE) is a typical example of two monomers where both components are polymerizable in a “one-pot” procedure by two distinct reaction mechanisms. Non-aqueous dispersions (NAD) are obtained in a first step by free-radical polymerization of the dispersed VAc-PVAc phase. The study of the reaction kinetics has shown that the polymerization rate is mainly influenced by the partition coefficient of VAc between both phases in presence. The colloidal characteristics of the NAD, such as particle size, stability and viscosity were examined in function of monomer and initiator concentrations. Preliminary UV curing tests of the PDMS-DGE phase in the presence of a cationic photoinitiator have shown that PVAc/PDMS two-phase coatings can be obtained, without any solvent emission.     

A reservoir-type controlled release device using aqueous-organic partitioning and a porous membrane

A reservoir-type controlled release device based on aqueous-organic partitioning is described. The reservoir is bounded by a microporous or porous membrane, either a hollow fiber or a flat film. The agent partitions between phases at the aqueous-organic interface of the reservoir and the pore mouth, and then diffuses through the membrane pore into a surrounding aqueous solution. The partition coefficient significantly influences the rate of release of the agent. The performance of the system is evaluated using model agents. Controlled release from a reservoir containing a pure organic liquid agent is demonstrated using toluene. Zero-order release is achieved for benzoic acid partitioning from an organic reservoir into water-filled pores, and for nicotine partitioning from an aqueous reservoir into organic-filled pores. Studies using benzoic acid demonstrate the effectiveness of a thin, nonporous coating on slowing the rate of release. A fast-dissolving suspension of benzoic acid in decanol extends the duration of zero-order release. Two agents, nicotine and caffeine, are released simultaneously and independently from a divided reservoir. A simplified mathematical model is presented, and experimental results compared well with those predicted by the model.