Single ion-channel recordings using glass nanopore membranes

Protein ion-channel recordings using a glass nanopore (GNP) membrane as the support structure for lipid bilayer membranes are presented. The GNP membrane is composed of a single conical-shaped nanopore embedded in a approximately 50 microm-thick glass membrane chemically modified with a 3-cyanopropyldimethylchlorosilane monolayer to produce a surface of intermediate hydrophobicity. This surface modification results in lipid monolayer formation on the glass surface and a lipid bilayer suspended across the small orifice (100-400 nm-radius) of the GNP membrane, while allowing aqueous solutions to fully wet the glass nanopore. The GNP membrane/bilayer structures, which exhibit ohmic seal resistances of approximately 70 GOmega and electrical breakdown voltages of approximately 0.8 V, are exceptionally stable to mechanical disturbances and have lifetimes of at least 2 weeks. These favorable characteristics result from the very small area of bilayer (10(-10)-10(-8) cm(2)) that is suspended across the GNP membrane orifice. Fluorescence microscopy and vibrational sum frequency spectroscopy demonstrate that a lipid monolayer forms on the 3-cyanopropyl-dimethylchlorosilane modified glass surface with the lipid tails oriented toward the glass. The GNP membrane/bilayer structure is well suited for single ion-channel recordings. Reproducible insertion of the protein ion channel, wild-type alpha-hemolysin (WTalphaHL), and stochastic detection of a small molecule, heptakis(6-O-sulfo)-beta-cyclodextrin, are demonstrated. In addition, the insertion and removal of WTalphaHL channels are reproducibly controlled by applying small pressures (-100 to 350 mmHg) across the lipid bilayer. The electrical and mechanical stability of the bilayer, the ease of which bilayer formation is achieved, and the ability to control ion-channel insertion, coupled with the small bilayer capacitance of the GNP membrane-based system, provide a new and nearly optimal system for single ion-channel recordings.     

Fluorescence microscopy of the pressure-dependent structure of lipid bilayers suspended across conical nanopores

Glass and fused-quartz nanopore membranes containing a single conically shaped pore are promising solid supports for lipid bilayer ion-channel recordings due to the high inherent stability of lipid bilayers suspended across the nanopore orifice, as well as the favorable electrical properties of glass and fused quartz. Fluorescence microscopy is used here to investigate the structure of the suspended lipid bilayer as a function of the pressure applied across a fused-quartz nanopore membrane. When a positive pressure is applied across the bilayer, from the nanopore interior relative to the exterior bulk solution, insertion or reconstitution of operative ion channels (e.g., α-hemolysin (α-HL) and gramicidin) in the bilayer is observed; conversely, reversing the direction of the applied pressure results in loss of all channel activity, although the bilayer remains intact. The dependence of the bilayer structure on pressure was explored by imaging the fluorescence intensity from Nile red dye doped into suspended 1,2-diphytanoyl-sn-glycero-3-phosphocholine bilayers, while simultaneously recording the activity of an α-HL channel. The fluorescence images suggest that a positive pressure results in compression of the bilayer leaflets and an increase in the bilayer curvature, making it suitable for ion-channel formation and activity. At negative pressure, the fluorescence images are consistent with separation of the lipid leaflets, resulting in the observed loss of the ion-channel activity. The fluorescence data indicate that the changes in the pressure-induced bilayer structure are reversible, consistent with the ability to repeatedly switch the ion-channel activity on and off by applying positive and negative pressures, respectively.     

Gating of single synthetic nanopores by proton-driven DNA molecular motors

Switchable ion channels that are made of membrane proteins play different roles in cellular circuits. Since gating nanopore channels made of proteins can only work in the environment of lipid membrane, they are not fully compatible to the application requirement as a component of those nanodevice systems in which lipid membranes are hard to establish. Here we report a synthetic nanopore-DNA system where single solid-state conical nanopores can be reversibly gated by switching DNA motors immobilized inside the nanopores. High- (on-state) and low- (off-state) conductance states were found within this nanopore-DNA system corresponding to the single-stranded and i-motif structures of the attached DNA motors. The highest gating efficiency indicated as current ratio of on-state versus off-state was found when the length of the attached DNA molecule matched the tip diameter of the nanopore well. This novel nanopore-DNA system, which was gated by collective folding of structured DNA molecules responding to the external stimulus, provided an artificial counterpart of switchable protein-made nanopore channels. The concept of this DNA motor-driven nanopore switch can be used to build novel, biologically inspired nanopore machines with more precisely controlled functions in the near future by replacing the DNA molecules with other functional biomolecules, such as polypeptides or protein enzymes.     

A Membrane Tension-Responsive Mechanosensitive DNA Nanomachine

Membrane curvature reflects physical forces operating on the lipid membrane, which plays important roles in cellular processes. Here, we design a mechanosensitive DNA (MSD) nanomachine that mimics natural mechanosensitive PIEZO channels to convert the membrane tension changes of lipid vesicles with different sizes into fluorescence signals in real time. The MSD nanomachine consists of an archetypical six-helix-bundle DNA nanopore, cholesterol-based membrane anchors, and a solvatochromic fluorophore, spiropyran (SP). We find that the DNA nanopore effectively amplifies subtle variations of the membrane tension, which effectively induces the isomerization of weakly emissive SP into highly emissive merocyanine isomers for visualizing membrane tension changes. By measuring the membrane tension via the fluorescence of MSD nanomachine, we establish the correlation between the membrane tension and the curvature that follows the Young-Laplace equation. This DNA nanotechnology-enabled strategy opens new routes to studying membrane mechanics in physiological and pathological settings.     

Pore-spanning lipid membrane under indentation by a probe tip: a molecular dynamics simulation study

We study the indentation of a free-standing lipid membrane suspended over a nanopore on a hydrophobic substrate by means of molecular dynamics simulations. We find that in the course of indentation the membrane bends at the point of contact and the fringes of the membrane glide downward intermittently along the pore edges and stop gliding when the fringes reach the edge bottoms. The bending continues afterward, and the large strain eventually induces a phase transition in the membrane, transformed from a bilayered structure to an interdigitated structure. The membrane is finally ruptured when the indentation goes deep enough. Several local physical quantities in the pore regions are calculated, which include the tilt angle of lipid molecules, the nematic order, the included angle, and the distance between neighboring lipids. The variations of these quantities reveal many detailed, not-yet-specified local structural transitions of lipid molecules under indentation. The force-indentation curve is also studied and discussed. The results make a connection between the microscopic structure and the macroscopic properties and provide deep insight into the understanding of the stability of a lipid membrane spanning over nanopore.     

Surface-charge induced ion depletion and sample stacking near single nanopores in microfluidic devices

We report integrated nanopore/microchannel devices in which single nanopores are isolated between two microfluidic channels. The devices were formed by sandwiching track-etched conical nanopores in a poly(ethylene terephthalate) membrane between two poly(dimethylsiloxane) microchannels. Integration of the nanopores into microfluidic devices improves mass transport to the nanopore and allows easy coupling of applied potentials. Electrical and optical characterization of these individual nanopores suggests double layer overlap is not required to form an ion depletion region adjacent to the nanopore in the microchannel; rather, excess surface charge in the nanopore contributes to the formation of this ion depletion region. We used fluorescent probes to optically map the ion depletion region and the stacking of fluorescein near the nanopore/microchannel junction, and current measurements confirmed formation of the ion depletion region.     

Transmembrane Signaling with Lipid‐Bilayer Assemblies as a Platform for Channel‐Based Biosensing

Artificial and natural lipid membranes that elicit transmembrane signaling is are useful as a platform for channel‐based biosensing. In this account we summarize our research on the design of transmembrane signaling associated with lipid bilayer membranes containing nanopore‐forming compounds. Channel‐forming compounds, such as receptor ion‐channels, channel‐forming peptides and synthetic channels, are embedded in planar and spherical bilayer lipid membranes to develop highly sensitive and selective biosensing methods for a variety of analytes. The membrane‐bound receptor approach is useful for introducing receptor sites on both planar and spherical bilayer lipid membranes. Natural receptors in biomembranes are also used for designing of biosensing methods.     

Protein biosensors based on biofunctionalized conical gold nanotubes

There is increasing interest in the concept of using nanopores as the sensing elements in biosensors. The nanopore most often used is the alpha-hemolysin protein channel, and the sensor consists of a single channel embedded within a lipid bilayer membrane. An ionic current is passed through the channel, and analyte species are detected as transient blocks in this current associated with translocation of the analyte through the channel-stochastic sensing. While this is an extremely promising sensing paradigm, it would be advantageous to eliminate the very fragile lipid bilayer membrane and perhaps to replace the biological nanopore with an abiotic equivalent. We describe here a new family of protein biosensors that are based on conically shaped gold nanotubes embedded within a mechanical and chemically robust polymeric membrane. While these sensors also function by passing an ion current through the nanotube, the sensing paradigm is different from the previous devices in that a transient change in the current is not observed. Instead, the protein analyte binds to a biochemical molecular-recognition agent at the mouth of the conical nanotube, resulting in complete blockage of the ion current. Three different molecular-recognition agents, and correspondingly three different protein analytes, were investigated: (i) biotin/streptavidin, (ii) protein-G/immunoglobulin, and (iii) an antibody to the protein ricin with ricin as the analyte.     

Lipid bilayer membrane technologies: A review on single-molecule studies of DNA sequencing by using membrane nanopores

Nanopores based on α-hemolysin and MspA represent attractive sensing platforms due to easy production and operation with relatively low background noise. Such characteristics make them highly favorable for sequencing nucleic acids. Artificial lipid bilayer membranes, also referred to as black lipid membranes, in conjunction with membrane nanopores, can be applied to both the detection and highly efficient sequencing of DNA on a single-molecule level. However, the inherently weak physical properties of the membrane have impeded progress in these areas. Current issues impeding the ultimate recognition of the artificial lipid bilayer as a viable platform for detection and sequencing of DNA include membrane stability, lifespan, and automation. This review (with 105 references) highlights attempts to improve the attributes of the artificial lipid bilayer membrane starting with an overview on the present state and limitations. The first main section covers lipid bilayer membranes (BLM) in general. The following section reviews the various kinds of lipid bilayer membrane platforms with subsections on polymer membranes, solid-supported membranes, hydrogel-encapsulated membranes, shippable and storable membrane platforms, and droplet interface bilayers. A further section covers engineered biological nanopore sensor applications using BLMs with subsections offering a comparative view of different DNA sequencing methods, a detailed look at DNA Sequencing by synthesis using alpha-hemolysin nanopores, sequencing by synthesis using the MspA nanopore and quadromer map, and on limitations of sequencing based on synthesis technology. We present an outlook at the end that discusses current research trends on single-molecule sequencing to highlight the significance of this technology and its potential in the medical and environmental fields.

Open image in new window

Graphical abstract Sequencing by Synthesis, a novel method of sequencing DNA, uses the αHL biological nanopore and the artificial lipid bilayer membrane platform. Polymer tags attached to nucleotides bind to the polymerase-primer–template complex and are characterized by the nanopore upon release.

     

Selectively detecting attomolar concentrations of proteins using gold lined nanopores in a nanopore blockade sensor

Disease diagnosis at earlier stages requires the development of ultrasensitive biosensors for detecting low-abundance biomarkers in complex biological fluids within a reasonable time frame. Here, we demonstrate the development of an ultrasensitive nanopore blockade biosensor that can rapidly diagnose a model protein biomarker, prostate-specific antigen (PSA) with high selectivity. The solid-state nanopores have gold located only along the length of the nanopore whilst the rest of the membrane is silicon nitride. The orthogonal use of materials allows nanopore arrays with a different surface chemistry inside the nanopore relative to the rest of the membrane to be fabricated. The importance of this differential surface chemistry is it can improve the detection limit of nanopore blockade sensors in quantitative analysis. Based on such functionalized nanopore devices, nanopore blockade sensors lower the limit of detection by an order of magnitude and enable ultrasensitive detection of PSA as low as 80 aM. The findings from this study open new opportunities for nanopore sensors in further developments including optical detection and ultralow detection limit biosensing at complex biological fluids.

Selective detection of attomolar proteins was achieved using gold lined nanopores in a nanopore blockade sensor.     

Effect of crown ether on ion currents through synthetic membranes containing a single conically shaped nanopore

Ion-current measurements were made on synthetic polymer membranes that contained a single conically shaped nanopore. This entailed placing an electrolyte solution on either side of the membrane, using an electrode placed in each solution to control the transmembrane potential, and measuring the resulting transmembrane ion current. The effect of the crown ether commonly called 18-crown-6 (18C6) on the measured ion current was investigated. Adding 18C6 to the electrolyte solution on one side of a conical nanopore membrane provides a way to rectify the ion current flowing through the nanopore. This chemical rectification is observed only when the cation of the electrolyte is complexed by 18C6 (e.g., K+), and when the mouth diameter of the conical nanopore is of molecular dimensions, in this case approximately 1.5 nm. This chemical rectification can either augment or diminish the inherent electrostatic rectification observed with these small mouth-diameter nanopores. We have interpreted these results using a model based on the formation of a junction potential at the membrane-solution interface. This junction potential arises because the transference number for the K+-18C6 complex in bulk solution is larger than its transference number in the mouth of the conical nanopore.     

Formation of individual protein channels in lipid bilayers suspended in nanopores

Free-standing lipid bilayers are formed in regularly arranged nanopores of 200, 400 and 800 nm in a 300 nm thin hydrophobic silicon nitride membrane separating two fluid compartments. The extraordinary stability of the lipid bilayers allows us to monitor channel formation of the model peptide melittin and α-hemolysin from Staphylococcus aureus using electrochemical impedance spectroscopy and chronoamperometry. We observed that melittin channel formation is voltage-dependent and transient, whereas transmembrane heptameric α-hemolysin channels in nano-BLMs persist for hours. The onset of α-hemolysin-mediated conduction depends on the applied protein concentration and strongly on the diameter of the nanopores. Heptameric channel formation from adsorbed α-hemolysin monomers needs more time in bilayers suspended in 200 nm pores compared to bilayers in pores of 400 and 800 nm diameters. Diffusion of sodium ions across α-hemolysin channels present in a sufficiently high number in the bilayers was quantitatively and specifically determined using ion selective electrodes. The results demonstrate that relatively small variations of nano-dimensions have a tremendous effect on observable dynamic biomolecular processes. Such nanopore chips are potentially useful as supports for stable lipid bilayers to establish functional assays of membrane proteins needed in basic research and drug discovery.     

Protein Detection Through Single Molecule Nanopore

A single nanopore represents a versatile single-molecule probe that can be employed to reveal several important features of proteins, such as physical structure, backbone flexibility, mechanical stability, their folding state, binding affinity to other interacting ligands and enzymatic activity. In this review, we summarize the development and current research related to the field of protein detection by nanopore, as well as a few examples of the pioneer work on protein detection. We first discuss the principle of electrical detection with nanopores and how this technique provides information from current traces. Then the development from peptide detection with biological nanopore to protein detection through solid-state nanopore is described. Finally, we prospect the measurement of protein shape and construction using nanopore technology for the applications in life research area.     

Transmembrane nanopores from porphyrin supramolecules

A porphyrin-based nanopore was constructed through a bilayer lipid membrane (BLM). The macrocyclic porphyrin (the inner diameter = ca. 2.1 nm) having six carboxylic acid groups directed up and down was synthesized by self-assembly of three trisporphyrins, metathesis linking, and subsequent hydrolysis. The porphyrin was incorporated into soybean lecithin based BLM, and the ion currents through the nanopore were observed under 500 mM KCl, LiCl, CaCl2, and tetraalkylammonium chloride solutions, indicating formation of a large pore through BLM. Blocking of the ion current was achieved by addition of the polycationic fourth-generation PAMAM dendrimer.     

A New Cells‐Compatible Microfluidic Device for Single Channel Recordings

We report the fabrication of a microfluidic apparatus and the realization of a sensors based on PEDOT : PSS, a biocompatible semiconductor polymer used in substitution of standard electrodes for electrophysiological studies and for detection of nanopores in membrane. This gives the possibility to study the mechanisms of ions balance and molecular transport though cell membranes. In particular the apparatus is based on two chambers connected through an aperture in a PTFE sheet where lipid bilayer are formed using Montal‐Mueller method, and the pore‐forming proteins activity is detected by polymeric electrodes. This methodology could be applied to examine different membrane proteins for the purpose of biosensing, drug screening and nanopore technologies.     

Aerolysin蛋白纳米孔道直接检测单个DNA碱基修饰

基于Aerolysin生物膜通道蛋白的纳米孔道电化学分析技术,因其高的电化学空间限域能力可实现超灵敏DNA单分子检测。本文利用单个Aerolysin纳米孔道在无需标记、无需扩增的条件下直接分辨3种具有单个碱基差异的单链DNA。实验结果显示,具有单个炔基侧链基团修饰的单个ss DNA在限域空间内与Aerol-ysin纳米孔道的相互作用时间较未修饰的ss DNA增长近7倍,电流阻断程度增大7%,且高斯峰半峰宽减小了44%,增强了Aerolysin纳米孔道对单个DNA分子的分辨能力。研究成果有望推动Aerolysin纳米孔在DNA直接测序及表观遗传修饰检测中的应用。     

Resistive-pulse detection of multilamellar liposomes

The resistive-pulse method was used to monitor the pressure-driven translocation of multilamellar liposomes with radii between 190 and 450 nm through a single conical nanopore embedded in a glass membrane. Liposomes (0% and 5% 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (sodium salt) in 1,2-dilauroyl-sn-glycero-3-phosphocholine or 0%, 5%, and 9% 1,2-dipalmitoyl-sn-glycero-3-phospho(1'-rac-glycerol) (sodium salt) in 1,2-dipalmitoyl-sn-glycero-3-phosphocholine) were prepared by extrusion through a polycarbonate membrane. Liposome translocation through a glass nanopore was studied as a function of nanopore size and the temperature relative to the lipid bilayer transition temperature, T(c). All translocation events through pores larger than the liposome, regardless of temperature, show translocation times between 30 and 300 μs and current pulse heights between 0.2% and 15% from the open pore baseline. However, liposomes at temperatures below the T(c) were captured at the pore orifice when translocation was attempted through pores of smaller dimensions, but squeezed through the same pores when the temperature was raised above T(c). The results provide insights into the deformation and translocation of individual liposomes through a porous material.     

Proteomics reveal a link between the endoplasmic reticulum and lipid secretory mechanisms in mammary epithelial cells

The synthesis and secretion of lipids by mammary epithelial cells is a highly ordered process that involves several distinct steps. Triacylglycerols are synthesized in the endoplasmic reticulum and incorporated into microlipid droplets which coalesce into cytoplasmic lipid droplets. These are vectorially transported to the apical plasma membrane where they are secreted into the milk surrounded by a membrane bilayer. The origin of this membrane as well as the mechanism by which cytoplasmic lipid droplets form and become surrounded by membrane is poorly understood. Proteomic analysis of the protein composition of milk fat globules and cytoplasmic lipid droplet has revealed that the endoplasmic reticulum is not only involved in the synthesis of the lipid but also potentially contributes to the membrane component of milk fat globules. The proteins identified suggest possible mechanisms of multiple steps during this process. Completion of the proteome of milk fat globule membranes and cytoplasmic lipid droplets will provide the necessary reporter molecules to follow and dissect the mechanisms of the sorting and ultimate secretion of cytoplasmic lipid droplets.     

Pd encapsulated and nanopore hollow fiber membranes: Synthesis and permeation studies

New types of supported Pd membranes were developed for high temperature H₂ separation. Sequential combinations of boehmite sol slip casting and film coating, and electroless plating (ELP) steps were designed to synthesize “Pd encapsulated” and “Pd nanopore” membranes supported on -Al₂O₃ hollow fibers. The permeation characteristics (flux, permselectivity) of a series of unaged and aged encapsulated and nanopore membranes with different Pd loadings were compared to those of a conventional 1 μm Pd/4 μm γ-Al₂O₃/-Al₂O₃ hollow fiber membrane. The unaged encapsulated membrane exhibited good performance with ideal H₂/N₂ separation factors of 3000–8000 and H₂ flux 0.4 mol/m² s at 370 °C and a transmembrane pressure gradient of 4 × 10⁵ Pa. The unaged Pd nanopore membranes had a lower initial flux and permselectivity, but exhibited superior performance with extended use (200 h). At the same conditions the unaged 2.6 μm Pd nanopore membrane had a H₂ flux of 0.16 mol/m² s and separation factor of 500 and the unaged 0.6 μm Pd nanopore membrane had a H₂ flux of 0.25 mol/m² s and separation factor of 50. Both nanopore membranes stabilized after 40 h of operation, in contrast to a continued deterioration of the permselectivity for the other membranes. An analysis of the permeation data reveals a combination of Knudsen and convective transport through membrane defects. A phenomenological, qualitative model of the synthesis and resulting structure of the encapsulated and nanopore membranes is presented to explain the permeation results.     

Stochastic nanopore sensors for the detection of terrorist agents: Current status and challenges

Nanopore stochastic sensor works by monitoring the ionic current modulations induced by the passage of analytes of interest through a single pore, which can be obtained from a biological ion channel by self-assembly or artificially fabricated in a solid-state membrane. In this minireview, we overview the use of biological nanopores and artificial nanopores for the detection of terrorist agents including explosives, organophosphorus nerve agents, nitrogen mustards, organoarsenic compounds, toxins, and viruses. We also discuss the current challenge in the development of deployable nanopore sensors for real-world applications.