Influence of different mixing ratios of Mg and B powder on structural and superconducting properties in MgB2

We fabricated MgB₂ bulks by an in situ Mg diffusive reaction method from compacted B and compacted mixtures of Mg and B respectively. All samples were sintered at 1100 °C for 2 h. MgO impurity phase, density, and critical current density (J_c) were found to be dependent of the starting amount of mixing Mg powder. We also found that the MgO formation in MgB₂ matrix was not mainly attributed to the starting amount of additional Mg powder for Mg diffusive reaction. This indicates that MgO presented in the starting Mg powder is hardly diffused into compacted B.     

The superconducting properties of Cu-doped MgB2 bulks prepared by a high-energy milling method

The Cu-doped MgB₂ bulks were prepared by a high-energy milling and subsequent sintering method. Compared to the pure and Cu-doped bulks prepared only by sintering, the critical current density (J_c) of the milled Cu-doped samples was improved with a slight decrease in critical transition temperature (T_c). Using the phase analysis and microstructure observation, it has been found that the MgB₂ grains in the milled Cu-doped sample was refined with the high-energy milling and thus provided more grain boundary pinning, which was contributed to the improvement of J_c at high field.     

Pore formation in in situ processed MgB2 superconductors

MgB₂ bulks were prepared by an in situ process which utilizes the reaction between boron and magnesium powder. The reaction time was fixed at 0.5 h and the temperature was changed from 600 °C to 1000 °C. The density decrease due to pore formation and mass (mainly magnesium) loss during the formation reaction of MgB₂ was observed in all samples. In addition to the pore formation, a pellet expansion which can be explained by the outgrowth of MgB₂ grains was also observed. Two different mechanisms were adopted to explain the pore formation; Kirkendall pores formed at a temperature below the melting point (m.p.) of magnesium by a difference in the diffusivity between magnesium and boron, and the pores formed at a temperature above the m.p. by melting of magnesium and a capillary movement. The density, T_c and J_c results suggest that the current carrying capacity can be improved by a careful control of the process parameters regarding a pore evolution.     

MgB2 coated superconducting tapes with high critical current densities fabricated by hybrid physical-chemical vapor deposition

The MgB₂ coated superconducting tapes have been fabricated on textured Cu (0 0 1) and polycrystalline Hastelloy tapes using coated conductor technique, which has been developed for the second generation high temperature superconducting wires. The MgB₂/Cu tapes were fabricated over a wide temperature range of 460-520 °C by using hybrid physical-chemical vapor deposition (HPCVD) technique. The tapes exhibited the critical temperatures (T_c) ranging between 36 and 38 K with superconducting transition width (ΔT_c) of about 0.3-0.6 K. The highest critical current density (J_c) of 1.34 × 10⁵ A/cm² at 5 K under 3 T is obtained for the MgB₂/Cu tape grown at 460 °C. To further improve the flux pinning property of MgB₂ tapes, SiC is coated as an impurity layer on the Cu tape. In contrast to pure MgB₂/Cu tapes, the MgB₂ on SiC-coated Cu tapes exhibited opposite trend in the dependence of J_c with growth temperature. The improved flux pinning by the additional defects created by SiC-impurity layer along with the MgB₂ grain boundaries lead to strong improvement in J_c for the MgB₂/SiC/Cu tapes. The MgB₂/Hastelloy superconducting tapes fabricated at a temperature of 520 °C showed the critical temperatures ranging between 38.5 and 39.6 K. We obtained much higher J_c values over the wide field range for MgB₂/Hastelloy tapes than the previously reported data on other metallic substrates, such as Cu, SS, and Nb. The J_c values of J_c(20 K, 0 T) ∼5.8 × 10⁶ A/cm² and J_c(20 K, 1.5 T) ∼2.4 × 10⁵ A/cm² is obtained for the 2-μm-thick MgB₂/Hastelloy tape. This paper will review the merits of coated conductor approach along with the HPCVD technique to fabricate MgB₂ conductors with high T_c and J_c values which are useful for large scale applications.     

Vortex pinning properties of –Ba–Cu–O and –Ba–Cu–O superconducting bulks

We have studied the effect of a small amount of Y-site substitution by La or Pr ions on the vortex pinning in the Y–Ba–Cu–O system. (Y_1-xLa_x)–Ba–Cu–O and (Y_1-xPr_x)–Ba–Cu–O bulks were fabricated by the melt-textured growth, in which x was varied from 0 to 0.01. The critical current density J_c at 77 K is improved in magnetic fields parallel to the c-axis above 2–4.5 T and the corresponding irreversibility field, H_irr, shifts to the higher value in both bulks.     

Effect of BiFeO3 addition on Bi2O3–ZnO–Nb2O5 based ceramics

In this paper, low temperature sintering of the Bi₂(Zn_1/3Nb_2/3)₂O₇ (β-BZN) dielectric ceramics was studied with the use of BiFeO₃ as a sintering aid. The effects of BiFeO₃ contents and the sintering temperature on the phase structure, density and dielectric properties were investigated. The results showed that the sintering temperature could be decreased and the dielectric properties could be retained by the addition of BiFeO₃. The structure of BiFeO₃ doped β-BZN was still the monoclinic pyrochlore phase. The sintering temperature of BiFeO₃ doped β-BZN ceramics was reduced from 1000 °C to 920 °C. In the case of 0.15 wt.% BiFeO₃ addition, the β-BZN ceramics sintered at 920 °C exhibited good dielectric properties, which were listed as follows: ε_r = 79 and tan δ = 0.00086 at a frequency of 1 MHz. The obtained properties make this composition to be a good candidate for the LTCC application.     

Effect of processing temperature on the superconducting properties of acetone doped MgB2 tapes

Correlation of phase formation, critical transition temperature T_c, microstructure, and critical current density J_c with sintering temperature has been studied for acetone doped MgB₂/Fe tapes. Sintering was performed at 600–850 °C for 1 h in a flowing Ar atmosphere. High boron substitution by carbon was obtained with increasing the sintering temperature; however, the acetone doped samples synthesized at 800 °C contain large size MgB₂ grains and more MgO impurities. Incomplete reaction for the acetone doped samples heated at 600 °C result in bad intergrain connectivity. At 4.2 K, the best J_c value was achieved in the acetone doped sample sintered at 700 °C, which reached 24,000 A/cm² at 10 T and 10,000 A/cm² at 12 T, respectively. Our results indicate that the small grain size and less impurity were also important for the improvement of J_c–B properties besides the substitutions of B by C.     

Stoichiometry dependence of the critical current density in pure and nano-SiC doped MgB2/Fe tapes

The stoichiometry dependence of the microstructure and superconducting properties of pure and nano-SiC doped MgB₂/Fe tapes was systematically investigated. The tapes prepared with the composition of a slight deficiency of Mg (Mg_0.9B₂ and Mg_xB₂(SiC)_0.1 (x = 0.9 and 1.0)) showed the best transport J_c. Adding a slight excess of Mg like 5%, as being done by many researchers, was not beneficial for the J_c improvement as expected. The onset T_c was not significantly changed in both doped and undoped tapes by adding excess of boron or magnesium, but the transition widths were broadened due to the induced impurities. The slightly-Mg-deficient pure samples show smaller grain sizes, which corresponds to a better J_c–B performance at high magnetic field due to the enhanced grain boundary pinning. The field dependence of J_c in nano-SiC doped tapes was almost not influenced by varying the starting Mg content although microstructural difference can still be seen, suggesting that the flux pinning ability was mainly controlled by the carbon substitution effect for boron.     

纳米C和SiC掺杂对MgB2带材超导性能的影响

采用X射线衍射仪，扫描电镜，超导量子干涉仪等仪器对纳米C和SiC掺杂的MgB₂带材进行了表征，并采用标准四引线法对样品的临界电流进行了测试. 实验表明，C和SiC掺杂在提高MgB₂带材高场下的临界电流密度方面具有显著效果. 在温度为4.2 K、磁场大于9 T条件下，C和SiC掺杂样品的临界电流密度与未掺杂样品相比均提高一个数量级以上. 掺杂样品高磁场下良好的临界电流性能主要归因于C对B的替代所产生的晶格畸变、位错等缺陷和局部成分变化而导致的有效晶内钉扎作用. 实验结果表明，SiC掺杂的MgB2带材之所以具有非常好的高场电流特性，和C掺杂的样品一样， C对B的替代起到十分关键的作用. 关键词： 2带材')" href="#">MgB₂带材 C掺杂 SiC掺杂 临界电流性能     

Effect of annealing temperature on some physical properties of MgB2 by using the Hall probe ac-susceptibility method

A commercially available powder of MgB₂ is used as starting material for the examination of the influence of the annealing temperature on the properties of this intermediate-T_c superconductor. We performed scanning electron microscopy (SEM) and Hall ac-susceptibility measurements as a function of temperature and ac-field amplitude on samples annealed at 650, 750, 850 and 950 °C. The imaginary part of ac-susceptibility measurements is used to calculate both the inter-granular critical current density, J_c(T_p) and density of pinning force, α_j(0). It was observed that all T_c, J_c(T_p) and α_j(0) exhibit a non-monotonic behavior on the annealing temperature range studied in this work. T_c is measured to be 39.85±0.02 K and J_c(T_p) is estimated to be as high as 60 A/cm² at 39.2 K for the sample annealed at 850 °C. The peak temperature, T_p, in the imaginary part of the ac-susceptibility curves shifts to lower temperatures with both decreasing the annealing temperature and increasing the amplitude of the ac-magnetic fields. A comparison of the experimental ac-susceptibility data with theoretical critical-state models that are currently available is performed. SEM investigations showed that the grain size increases, and the grain connectivity improves when the annealing temperature increases up to 850 °C. The possible reasons for the observed changes in transport, microstructure and magnetic properties due to annealing temperature are discussed.     

Effects of doping with nanoscale Co3O4 particles on the superconducting properties of powder-in-tube processed MgB2 tapes

Nanoscale Co₃O₄ particles were doped into MgB₂ tapes with the aim of developing superconducting wires with high-current-carrying capacity. Fe-sheathed MgB₂ tapes with a mono-core were prepared using the in situ powder-in-tube (PIT) process with the addition of 0.2–1.0 mol% Co₃O₄. The critical temperature decreased monotonically with an increasing amount of doped Co₃O₄ particles for all heat-treatment temperatures from 600 to 900 °C. However, the transport critical current density (J_c) at 4.2 K varied with the heat-treatment temperatures. The J_c values in magnetic fields ranging from 7 to 12 T decreased monotonically with increasing Co₃O₄ doping level for a heat-treatment temperature of 600 °C. In contrast, some improvements on the J_c values of the Co₃O₄ doped tapes were observed in the magnetic fields below 10 T for 700 and 800 °C. Furthermore, J_c values in all the fields measured increased as the Co₃O₄ doping level increase from 0 to 1 mol% for 900 °C. This heat-treatment temperature dependence of the J_c values could be explained in terms of the heat-treatment temperature dependence of the irreversibility field with Co₃O₄ doping.     

Iron doping effect on superconducting properties of MgB2

Iron-doped MgB₂ bulks are prepared by hybridized diffusion method using nano-powder and macro-powder of pure iron as iron source. The doping effect on superconductivity transition temperature, T_c, and critical current J_c have been investigated. It is found that both T_c and J_c of MgB₂ show quite different features depending on the particle size of the dopant powders. It is demonstrated that different from iron bulk or large size powders, iron nano-powders are active dopant for MgB₂ which suppresses both T_c and J_c of MgB₂.     

Concurrent doping effect of Ti and nano-diamond on flux pinning of MgB2

Nano-diamond and titanium concurrently doped MgB₂ nanocomposites have been prepared by solid state reaction method. The effects of carbon and Ti concurrent doping on J_c–H behavior and pinning force scaling features of MgB₂ have been investigated. Although T_c was slightly depressed, J_c of MgB₂ have been significantly improved by the nano-diamond doping, especially in the high field region. In the mean time, the J_c value in low field region is sustained though concurrent Ti doping. Microstructure analysis reveals that when nano-diamond was concurrently doped with titanium in MgB₂, a unique nanocomposite in which TiB₂ forms a thin layer surrounding MgB₂ grains whereas nano-diamond particles were wrapped inside the MgB₂ grains. Besides, nano-diamond doping results in a high density stress field in the MgB₂ samples, which may take responsibility for the Δκ pinning behavior in the carbon-doped MgB₂ system.     

Microstructural and superconducting properties of C6H6 added bulk MgB2 superconductor

The effect of aromatic hydrocarbon (benzene, C₆H₆) addition on lattice parameters, microstructure, critical temperature (T_c), critical current density (J_c) of bulk MgB₂ has been studied. In this work only 2 mol% C₆H₆ addition was found to be very effective in increasing the J_c values, while resulting in slight reduction of the T_c. J_c values of 2 mol% C₆H₆ added MgB₂ bulks reached to 1.83×10⁶ A/cm² at 15 K and 0 T. Microstructural analyses suggest that J_c enhancement is associated with the substitution of carbon with boron and which also results in the smaller MgB₂ grain size. The change in the lattice parameters or the lattice disorder is claimed as a cause of the slight reduction in the T_c by carbon addition. We note that our results show the advantages of C₆H₆ addition include homogeneous mixing of precursor powders, avoidance of expansive nanoadditives, production of highly reactive C, and significant enhancement in J_c of MgB₂, compared to un-doped samples.     

MgB2 coated conductors directly grown on flexible metallic Hastelloy tapes by hybrid physical–chemical vapor deposition

MgB₂ coated conductors (CCs), which can avoid the low packing density problem of powder-in-tube (PIT) processed wires, can be a realistic solution for practical engineering applications. Here we report on the superior superconducting properties of MgB₂ CCs grown directly on the flexible metallic Hastelloy tapes without any buffer layer at various deposition temperatures from 520 to 600 °C by using hybrid physical–chemical vapor deposition (HPCVD) technique. The superconducting transition temperatures (T_c) are in the range of 38.5–39.4 K, comparable to bulk samples and high quality thin films. Clear (101) and (002) reflection peaks of MgB₂ are observed in the X-ray diffraction patterns without any indication of chemical reaction between MgB₂ and Hastelloy tapes. From scanning electron microscopy, it was found that connection between MgB₂ grains and voids strongly depend on the growth temperature. A systematic increase in the flux pinning force density and thereby the critical current density with decreasing growth temperature was observed for the MgB₂ CCs. The critical current density (J_c) of J_c(5 K, 0 T) ～10⁷ A/cm² and J_c(5 K, 2.5 T) ～10⁵ A/cm² has been obtained for the sample fabricated at a low growth temperature of 520 °C. The enhanced J_c (H) behavior can be understood on the basis of the variation in the microstructure of MgB₂ CCs with growth temperature.     

Synthesis, phase and microstructure characteristics of Pb(Zr0.52Ti0.48)O3–(Bi3.25La0.75)Ti3O12 ceramics

Ceramics with formula (1 − x)Pb(Zr_0.52Ti_0.48)O₃–x(Bi_3.25La_0.75)Ti₃O₁₂ (when x = 0, 0.1, 0.3, 0.5, 0.7, 0.9 and 1.0) were prepared by a solid-state mixed-oxide method and sintered at temperatures between 950 °C and 1250 °C. It was found that the optimum sintering temperature was 1150 °C at which all the samples had densities at least 95% of theoretical values. Phase analysis using X-ray diffraction indicated the existence of BLT- as well as PZT-based solid solutions with corresponding lattice distortion. Scanning electron micrographs of ceramic surfaces showed a plate-like structure in BLT-rich phase while the typical grain structure was observed for PZT-rich phase. The grain sizes of both pure BLT and PZT ceramics were found to decrease as the relative amount of the other phase increased. This study suggested that tailoring of properties of this PZT–BLT system was possible especially on the BLT-rich side due to its large solubility limit.     

Effects of carbon substitution via ball-milling in MgB2

In this study, we have synthesized the C-doped MgB₂ samples by solid-state reaction after mixing Mg powder with the attrition-milled B and C powders. The C added powders were mixed according to the nominal atomic ratio of Mg(B_1−xC_x)₂ with x = 0, 0.005, 0.015, 0.025, and 0.05. The analysis of X-ray diffraction showed that the (1 1 0) peaks, which correspond to the lattice parameter a, were shifted to a higher angle as the increasing of carbon contents. These results indicated that the B substitution for C became more dominant at higher doping level of C. The sample having the composition of Mg(B_0.975C_0.025)₂ gave the best critical current density (Jc) of ≈5000 A cm⁻² at 8 T and 5 K, as compared to the ≈1200 A cm⁻² for the undoped sample.     

Preparation and electrical properties of a pyrochlore-related Ce2Zr2O8−x phase

A pyrochlore-related Ce₂Zr₂O_8−x phase has been prepared in a reduction reoxidation process from Ce_0.5Zr_0.5O₂ powders. Ce₂Zr₂O_8−x, based on a cubic symmetry with a=1.053 nm, decomposes in nitrogen at 800 °C, but remains stable up to 900 °C in air. It shows mixed oxygen ionic and electronic conductivity. The bulk conductivity at 700 °C is 4×10⁻⁴ S cm⁻¹ in air and 1×10⁻² S cm⁻¹ in nitrogen, and the activation energy is 1.27 eV in air. In nitrogen, the Arrhenius law is not obeyed, and a curved plot was obtained from 400 to 700 °C; then, the conductivity decreased rapidly due to the thermal decomposition of Ce₂Zr₂O_8−x.     

The effect of Cu addition on the sintering process and superconductive properties of?μm-SiC-doped MgB2 bulks

Based on the phase identification and microstructural observation, it is found that the Cu addition in the μm-SiC-doped samples could depress the reaction between Mg and SiC and thus decrease the amount of both C substitution for B and the Mg₂Si nanoparticles. As a result, compared to the only μm-SiC-doped MgB₂ sample, the T _c of the Cu and μm-SiC multi-doped MgB₂ sample is improved and the J _c in high fields is deteriorated.     

柠檬酸掺杂的MgB2超导体钉扎机理的研究

本文研究了柠檬酸掺杂的MgB₂超导材料的J_c-B行为及其钉扎机理.在纯MgB₂多晶样品中,δT_c钉扎起主要作用,而在掺杂的样品中,则是δl钉扎和δT_c钉扎共同作用,并且δl钉扎机理占主要作用,其贡献比重随着掺杂量的增加而增加.从J_c-B行为和钉扎行为的分析都可以得到 关键词： 柠檬酸 2')" href="#">MgB₂ T_c钉扎')" href="#">δT_c钉扎 l钉扎')" href="#">δl钉扎