A New Type of Photocatalysis Initiated by Photoexcitation of Adsorbed Carbon Dioxide on ZrO2

ZrO₂ has been found to be an effective photocatalyst for reduction of CO₂ by hydrogen or methane at room temperature. The effective photon energy is less than the band gap energy of ZrO₂ (5.0 eV), indicating that photoexcitation of bulk ZrO₂ is not involved. The reaction is initiated by photoexcitation of surface carbonates derived from adsorption of CO₂ to convert it to a CO₂ ^– radical, which in turn reacts with hydrogen or methane to form surface formate. The formate is stable at temperatures below 573 K, but works as a reductant of CO₂ under photoirradiation. A new type of reaction mechanism is proposed.     

Metal/zirconia catalysts for the synthesis of methanol: characterization by vibrational spectroscopy

The activation of carbon dioxide by catalytic hydrogenation has been studied as a route for methanol synthesis. Metal/zirconia catalysts suitable for this reaction have been prepared by (i) activation of amorphous metal alloys [1] or (ii) coprecipitation of amorphous zirconia and metal oxides [2]. Vibrational spectroscopy has been used to obtain information on the catalytic reaction mechanism, by the in situ identification of adsorbed species and intermediates under reaction conditions.The reverse water-gas shift reaction, producing CO from CO₂ and hydrogen, plays a crucial role in the reaction mechanism. This reduction is shown to proceed via surface formate, adsorbed close to the metal/zirconia interface. Over Pd/ZrO₂ and Ni/ZrO₂, formate is reduced to methane without further observable intermediates. Pivotal intermediates on the route to methanol, as observed on Cu/ZrO₂ catalysts, are -bound formaldehyde and surface methylate. Addition of silver as a promoter can result in enhanced selectivities and productivities for methanol formation. The synergy between the two metals becomes evident from the spectroscopic measurements; the most prominent feature of the silver-promoted catalysts is a high concentration of surface formaldehyde, which is either preferentially formed or stabilized by the silver component.     

Boosting CO2 Hydrogenation to Formate over Edge-Sulfur Vacancies of Molybdenum Disulfide

Synthesis of formate from hydrogenation of carbon dioxide (CO₂) is an atom-economic reaction but is confronted with challenges in developing high-performance non-precious metal catalysts for application of the process. Herein, we report a highly durable edge-rich molybdenum disulfide (MoS₂) catalyst for CO₂ hydrogenation to formate at 200 °C, which delivers a high selectivity of over 99 % with a superior turnover frequency of 780.7 h⁻¹ surpassing those of previously reported non-precious metal catalysts. Multiple experimental characterization techniques combined with theoretical calculations reveal that sulfur vacancies at MoS₂ edges are the active sites and the selective production of formate is enabled via a completely new water-mediated hydrogenation mechanism, in which surface OH* and H* species in dynamic equilibrium with water serve as moderate hydrogenating agents for CO₂ with residual O* reduced by hydrogen. This study provides a new route for developing low-cost high-performance catalysts for CO₂ hydrogenation to formate.     

Mechanism of methanol conversion on ZrO<Subscript>2</Subscript> and 5% Cu/ZrO<Subscript>2</Subscript> according to in situ IR spectroscopic data

It is demonstrated by in situ IR spectroscopy that, in methanol conversion on ZrO₂ and 5% Cu/ZrO₂ catalysts, methoxy groups are present on the catalyst surface, which result from O-H or C-O bond breaking in the methanol molecule. Two types of formate complexes, localized on ZrO₂ and CuO, are also observed. The formate complexes form via the oxidative conversion of the methoxy groups. There are two types of linear methoxy groups. First-type linear methoxy groups condense with the formate complex located on CuO to yield methyl formate and then CO and H₂. Second-type methoxy groups appear as intermediate products in the formation of dimethyl ether. The main hydrogen formation reactions are the recombination of hydrogen atoms (which result from the interconversion of surface complexes) on copper clusters and the decomposition of methyl formate. The source of CO₂ in the gas phase is the formate complex, and the source of CO is methyl formate. The effect of water vapor and oxygen the surface reactions and product formation is discussed.     

Effect of surface photoreactions on the photocoloration of a wide band gap metal oxide: probing whether surface reactions are photocatalytic

A nonphotocatalytic reaction occurring on the surface of an irradiated wide band gap metal oxide, such as ZrO2, can affect the process of photoinduced formation of Zr3+, F- and V-type color centers. The effect of such reactions is seen as the influence of photostimulated adsorption on the photocoloration of the metal oxide specimen. In particular, photoadsorption of electron donor molecules leads to an increase of electron color centers, whereas photoadsorption of electron acceptor molecules leads to an increase of hole color centers. Monitoring the photocoloration of a metal oxide during a surface photochemical reaction probes whether the reaction is photocatalytic: accordingly, the influence of simple photoreactions on the photocoloration of ZrO2, reactions that involved the photoreduction of molecular oxygen, the photooxidation of molecular hydrogen, the photooxidation of hydrogen by adsorbed oxygen, and the photoinduced transformation of ammonia and carbon dioxide. Kinetics of the photoprocesses are reported, as well as the photoinduced chesorluminscence (PhICL effect) of ammonia. Thermoprogrammed desorption and mass spectral monitoring of the photoreaction involving NH3 identified hydrazine as an intermediate and molecular nitrogen as the final product. The photoreactions involving NH3 and CO2 are nonphotocatalytic processes, in contrast to the photooxidation of hydrogen which is photocatalytic. Carbon dioxide and carbonate radical anions are formed by interaction of CO2 with Zr3+ centers and hole states (OS-*), respectively. Mechanistic implications are discussed.     

二氧化碳甲烷化催化剂研究 Ⅲ.Ni-Ru-稀土/ZrO_2作用下的催化反应机理

用漫反射傅里叶红外光谱法研究了Ｎｉ－Ｒｕ－稀土／ＺｒＯ２多组分催化体系作用下的二氧化碳甲烷化反应机理．结果表明，碳酸根、甲酸根和一氧化碳是催化剂表面可以检出的吸附物种，其中表面的含氧酸根类物种是催化反应的主要中间物．二氧化碳通过与载体表面羟基的作用转化为含氧酸根类物种吸附于催化剂表面，并进一步氢解为甲烷．反应中生成的少量一氧化碳可能来源于表面含氧酸根氢解为甲烷的副反应．含不同稀土的多组分催化剂作用下的二氧化碳甲烷化过程有相同的反应机理．     

Activation of carbon dioxide and carbon monoxide at aluminium surfaces

Dynamic photoelectron spectroscopy has shown that the adsorption of carbon dioxide at aluminium surfaces is followed by a dissociative reaction leading to the formation of a metastable surface carbonate in the temperature range 80-120 K. The carbonate is subsequently reduced (120–475 K) (deoxygenated) to generate two different forms of surface carbon, one carbidic C^δ- (a) and the other less ionic C⁰(a) possibly graphitic. Quantification of the C(ls) and O(ls) spectra enable each of the species O^2-(a), CO₃^2-(a), C^δ-(a) and C⁰ (a) to be distinguished and their surface concentrations calculated over a wide temperature range. The temperature and pressure dependences of CO₂ reduction suggest the participation of a precursor dimer state (CO₂^---CO₂)(a) which then disproportionates. Furthermore studies of the coadsorption of ammonia and carbon dioxide in analogous systems indicate that a discrete and specifically reactive species, O^- (s), is formed during carbonate formation. The results are discussed in the context of recent theoretical studies of FREUND and MESSMER and also comparisons made with metal-CO₂ complexes.The facile surface reduction of CO₂ via a surface carbonate suggested that a possible route to carbon-oxygen bond cleavage in carbon monoxide interaction with an sp-metal surface (aluminium) was a step-wise oxidation to CO₂ leading to surface carbonate which was then readily deoxygenated. Studies of carbon monoxide: dioxygen mixtures (100: I) confirmed that this indeed occurred. A modified ELEY-RIDEAL type mechanism involving a hopping "non-adsorbed" CO molecule and a short-lived surface O^- (s) species is suggested.     

CO2 Activation by Zr+ and ZrO+ in Gas Phase

The gas-phase reduction of carbon dioxide to carbon monoxide, induced by Zr⁺ and ZrO⁺ catalysts, was investigated at density functional level of theory. Calculations were carried out using both hybrid and pure exchange-correlation functionals in order to reproduce adequately the energetic gap between the Zr^{+ 4}F and ²D electronic states and experimental reaction heats. In agreement with a guided ion beam tandem mass spectrometer study, we have found that carbon dioxide activation by Zr⁺ presents a spin-forbidden mechanism because of a spin inversion process occurring during reaction in the rate- determining step. ZrO⁺ interacts with CO₂ through two possible pathways both endothermic: formation of ZrO ₂ ⁺ and CO products is less unfavourable. Information about ground and excited states of ZrO⁺ and ZrO ₂ ⁺ oxides and bond dissociation energies of species present on the reaction paths was also given.     

Release of Formic Acid from Copper Formate: Hydride,Proton-Coupled Electron and Hydrogen Atom Transfer All Play their Role

Although the mechanism for the transformation of carbon dioxide to formate with copper hydride is well understood, it is not clear how formic acid is ultimately released. Herein, we show how formic acid is formed in the decomposition of the copper formate clusters Cu(II)(HCOO)₃⁻ and Cu(II)₂(HCOO)₅⁻. Infrared irradiation resonant with the antisymmetric C−O stretching mode activates the cluster, resulting in the release of formic acid and carbon dioxide. For the binary cluster, electronic structure calculations indicate that CO₂ is eliminated first, through hydride transfer from formate to copper. Formic acid is released via proton-coupled electron transfer (PCET) to a second formate ligand, evidenced by close to zero partial charge and spin density at the hydrogen atom in the transition state. Concomitantly, the two copper centers are reduced from Cu(II) to Cu(I). Depending on the detailed situation, either PCET or hydrogen atom transfer (HAT) takes place.     

Second‐Sphere Biomimetic Multipoint Hydrogen‐Bonding Patterns to Boost CO2 Reduction of Iron Porphyrins

Inspired by nature's orchestra of chemical subtleties to activate and reduce CO₂, we have developed a family of iron porphyrin derivatives in to which we have introduced urea groups functioning as multipoint hydrogen‐bonding pillars on the periphery of the porphyrinic ring. This structure closely resembles the hydrogen‐bond stabilization scheme of the carbon dioxide (CO₂) adduct in the carbon monoxide dehydrogenase (CODH). We found that such changes to the second coordination sphere significantly lowered the overpotential for CO₂ reduction in this family of molecular catalysts and importantly increased the CO₂ binding rate while maintaining high turnover frequency (TOF) and selectivity. Entrapped water molecules within the molecular clefts were found to be the source of protons for the CO₂ reduction.     

Lateral Adsorbate Interactions Inhibit HCOO− while Promoting CO Selectivity for CO2 Electrocatalysis on Silver

Ag is a promising catalyst for the production of carbon monoxide (CO) via the electrochemical reduction of carbon dioxide (CO₂ER). Herein, we study the role of the formate (HCOO^?) intermediate *OCHO, aiming to resolve the discrepancy between the theoretical understanding and experimental performance of Ag. We show that the first coupled proton‐electron transfer (CPET) step in the CO pathway competes with the Volmer step for formation of *H, whereas this Volmer step is a prerequisite for the formation of *OCHO. We show that *OCHO should form readily on the Ag surface owing to solvation and favorable binding strength. In situ surface‐enhanced Raman spectroscopy (SERS) experiments give preliminary evidence of the presence of O‐bound bidentate species on polycrystalline Ag during CO₂ER which we attribute to *OCHO. Lateral adsorbate interactions in the presence of *OCHO have a significant influence on the surface coverage of *H, resulting in the inhibition of HCOO^? and H₂ production and a higher selectivity towards CO.     

Photo-induced carbon dioxide reduction on hexagonal tungsten oxide via an oxygen vacancies-involved process

Although converting the greenhouse gasses carbon dioxide (CO₂) into solar fuels is regarded as a convenient means of solar energy storage, the intrinsic mechanism on how the high chemical inertness linear CO₂ molecules is activated and converted on a semiconductor oxide is still elusive. Herein, by creating the oxygen vacancies on the typical hexagonal tungsten oxide (WO₃), we realize the continuous photo-induced CO₂ reduction to selectively produce CO under light irradiation, which was verified by isotope labeling experiment. Detailed oxygen vacancies evolution investigation indicates that light irradiation can simultaneously induce the in-situ formation of oxygen vacancies on hexagonal WO₃, and the oxygen vacancies promote the adsorption and activation of CO₂ molecules, leading to the CO₂ reduction to CO on the hexagonal WO₃ via an oxygen vacancies-involved process. Besides, the existence of water further promotes the formation of CO₂ reduction intermediate, further promote the CO₂ photoreduction. Our work provides insight on the mechanism for converting CO₂ into CO under light irradiation.     

Methanol conversion over CuO supported on CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript>: An in situ IR spectroscopic study

The main reactions yielding hydrogen are the recombination of hydrogen atoms on copper clusters and methyl formate decomposition. Methyl formate results from the interaction between the linear methoxy group and the formate complex located on CuO. The source of CO₂ appearing in the gas phase is the formate complex, and the source of CO is methyl formate. The rates of methoxy group conversion and product formation over supports (ZrO₂, CeO₂, Ce_0.8Zr_0.2O₂) and copper-containing catalysts (5%Cu/CeO₂, 5%Cu/ZrO₂, 2%Cu/Ce_0.8Zr_0.2O₂, 2%Cu/Ce_0.1Y_0.1Zr_0.8) are compared. The dominant process in methoxy group conversion over the supports and copper-containing catalysts is methanol decomposition to H₂ and CO and to H₂ and CO₂, respectively. The methoxy group conversion rate is proportional to the H₂ and CO₂ formation rate and is determined by the concentration of supported copper.     

Competition between H and CO for Active Sites Governs Copper‐Mediated Electrosynthesis of Hydrocarbon Fuels

The dynamics of carbon monoxide on Cu surfaces was investigated during CO reduction, providing insight into the mechanism leading to the formation of hydrogen, methane, and ethylene, the three key products in the electrochemical reduction of CO₂. Reaction order experiments were conducted at low temperature in an ethanol medium affording high solubility and surface‐affinity for carbon monoxide. Surprisingly, the methane production rate is suppressed by increasing the pressure of CO, whereas ethylene production remains largely unaffected. The data show that CH₄ and H₂ production are linked through a common H intermediate and that methane is formed through reactions among adsorbed H and CO, which are in direct competition with each other for surface sites. The data exclude the participation of solution species in rate‐limiting steps, highlighting the importance of increasing surface recombination rates for efficient fuel synthesis.     

Ascorbate-induced oxidation of formate by peroxodisulfate: product yields,kinetics and mechanism

The slow reaction between peroxodisulfate and formate is significantly accelerated by ascorbate at room temperature. The products of this induced oxidation, CO₂ and oxalate (C₂O^2– ₄), were analyzed by several methods and the kinetics of this reaction were measured. The overall mechanism involves free radical species. Ascorbate reacts with peroxodisulfate to initiate production of the sulfate radical ion (SO^– ₄), which reacts with formate to produce carbon dioxide radical ion (CO^– ₂) and sulfate. The carbon dioxide radical reacts with peroxodisulfate to form CO₂ or self-combines to form oxalate. Competition occurring between these two processes determines the overall fate of the carbon dioxide radical species. As pH decreases, protonation of the carbon dioxide radical ion tends to favor production of CO₂.     

Creating a Low‐Potential Redox Polymer for Efficient Electroenzymatic CO2 Reduction

Increasing greenhouse gas emissions have resulted in greater motivation to find novel carbon dioxide (CO₂) reduction technologies, where the reduction of CO₂ to valuable chemical commodities is desirable. Molybdenum‐dependent formate dehydrogenase (Mo‐FDH) from Escherichia coli is a metalloenzyme that is able to interconvert formate and CO₂. We describe a low‐potential redox polymer, synthesized by a facile method, that contains cobaltocene (grafted to poly(allylamine), Cc‐PAA) to simultaneously mediate electrons to Mo‐FDH and immobilize Mo‐FDH at the surface of a carbon electrode. The resulting bioelectrode reduces CO₂ to formate with a high Faradaic efficiency of 99±5 % at a mild applied potential of ?0.66 V vs. SHE.     

Electronic Interactions on Platinum/(Metal-Oxide)-Based Photocatalysts Boost Selective Photoreduction of CO2 to CH4

By supporting platinum (Pt) and cadmium sulfide (CdS) nanoparticles on indium oxide (In₂O₃), we fabricated a CdS/Pt/In₂O₃ photocatalyst. Selective photoreduction of carbon dioxide (CO₂) to methane (CH₄) was achieved on CdS/Pt/In₂O₃ with electronic Pt−In₂O₃ interactions, with CH₄ selectivity reaching to 100 %, which is higher than that on CdS/Pt/In₂O₃ without electronic Pt−In₂O₃ interactions (71.7 %). Moreover, the enhancement effect of electronic Pt-(metal-oxide) interactions on selective photoreduction of CO₂ to CH₄ also occurs by using other common metal oxides, such as photocatalyst supports, including titanium oxide, gallium oxide, zinc oxide, and tungsten oxide. The electronic Pt-(metal-oxide) interactions separate photogenerated electron-hole pairs and convert CO₂ into CO₂^δ−, which can be easily hydrogenated into CH₄ via a CO₂^δ−→HCOO*→HCO*→CH*→CH₄ path, thus boosting selective photoreduction of CO₂ to CH₄. This offers a new way to achieve selective photoreduction of CO₂.     

Interfacing Formate Dehydrogenase with Metal Oxides for the Reversible Electrocatalysis and Solar‐Driven Reduction of Carbon Dioxide

The integration of enzymes with synthetic materials allows efficient electrocatalysis and production of solar fuels. Here, we couple formate dehydrogenase ( FDH ) from Desulfovibrio vulgaris Hildenborough (DvH) to metal oxides for catalytic CO₂ reduction and report an in‐depth study of the resulting enzyme–material interface. Protein film voltammetry (PFV) demonstrates the stable binding of FDH on metal‐oxide electrodes and reveals the reversible and selective reduction of CO₂ to formate. Quartz crystal microbalance (QCM) and attenuated total reflection infrared (ATR‐IR) spectroscopy confirm a high binding affinity for FDH to the TiO₂ surface. Adsorption of FDH on dye‐sensitized TiO₂ allows for visible‐light‐driven CO₂ reduction to formate in the absence of a soluble redox mediator with a turnover frequency (TOF) of 11±1 s^?1. The strong coupling of the enzyme to the semiconductor gives rise to a new benchmark in the selective photoreduction of aqueous CO₂ to formate.     

Potential of Supported Copper and Potassium Oxide Catalysts in the Combustion of Carbonaceous Particles

Different oxide carriers (TiO₂ and ZrO₂) as supports for low amounts of Cu²⁺ and K⁺ species (2 wt % as equivalent oxide) were tested in the catalytic oxidation of carbon black. The K-Cu/oxide catalysts were shown to have a lower soot combustion temperature than K/oxide, Cu/oxide, and pure oxide carriers. The K-Cu/ZrO₂ catalyst was found to be the most active; it exhibited activity in a loose contact nearly similar to that obtained in a tight contact mode. Physicochemical characterization by EPR, XPS, and TPR revealed the interaction of K⁺ species with Cu²⁺ species and the ZrO₂ carrier in K-Cu/ZrO₂ as well as a strongly distorted Cu²⁺ species on the ZrO₂ surface. The potassium ions ensure promoting effects towards the contact between the carbon black and the catalyst surface. Although potassium ions were found to lower the reducibility of the cupric oxide species, the oxidation rate of carbon black increased in the presence of K/oxide and K-Cu/oxide.     

Synthesis and FT–IR study of the acido–basic properties of the V2O5 catalysts supported on zirconia

In this paper we describe the synthesis and characterization of the acido–basic properties of catalysts containing varied amounts of vanadium supported on ZrO₂. The preparation of the zirconia was carried out using a hydrolysis method and the vanadium was introduced by impregnation with a porous volume in several stages, followed by calcinations under air at a temperature of 723 K. The obtained samples are characterized by adsorption–desorption of nitrogen and infrared spectral analysis of different species formed by acidic and basic probes. This adsorption on the surface of these compounds has been studied in order, in the hand to investigate information on their surface acidity and in the other hand to know particularly the nature and strength of acidic and basic sites. Among the molecular probes, we used carbon monoxide, carbon dioxide, pyridine and 2,6-dimethylpyridine. The adsorption of CO has shown that contrary to pure zirconia and oxidized V₂O₅/ ZrO₂, the reduced V₂O₅/ ZrO₂ samples favour the formation of CO co-ordinated on Lewis acidic sites of reduced V₂O₅ species (CO on V⁴⁺ or V³⁺). We also observe the creation of Brønsted acidic sites by means of the incorporation of vanadium.