Smooth model surfaces from lignin derivatives. II. Adsorption of polyelectrolytes and PECs monitored by QCM-D

For the first time to the knowledge of the authors, well-defined and stable lignin model surfaces have been utilized as substrates in polyelectrolyte adsorption studies. The adsorption of polyallylamine (PAH), poly(acrylic acid) (PAA), and polyelectrolyte complexes (PECs) was monitored using quartz crystal microgravimetry with dissipation (QCM-D). The PECs were prepared by mixing PAH and PAA at different ratios and sequences, creating both cationic and anionic PECs with different charge levels. The adsorption experiments were performed in 1 and 10 mM sodium chloride solutions at pH 5 and 7.5. The highest adsorption of PAH and cationic PECs was found at pH 7.5, where the slightly negatively charged nature of the lignin substrate is more pronounced, governing electrostatic attraction of oppositely charged polymeric substances. An increase in the adsorption was further found when the electrolyte concentration was increased. In comparison, both PAA and the anionic PEC showed remarkably high adsorption to the lignin model film. The adsorption of PAA was further studied on silica and was found to be relatively low even at high electrolyte concentrations. This indicated that the high PAA adsorption on the lignin films was not induced by a decreased solubility of the anionic polyelectrolyte. The high levels of adsorption on lignin model surfaces found both for PAA and the anionic PAA-PAH polyelectrolyte complex points to the presence of strong nonionic interactions in these systems.     

Metal ion-enriched polyelectrolyte complexes and their utilization in multilayer assembly and catalytic nanocomposite films

The mixing of Ag ion-doped poly(ethyleneimine) (PEI) and poly(acrylic acid) (PAA) produced Ag ion-doped polyelectrolyte complex particles (PECs) in solution. Positively charged Ag ion-doped PECs (Ag ion PECs) with a spherical shape were deposited alternatively with PAA to form a multilayer assembly. The multilayered film containing Ag ion PECs was reduced to generate a composite nanostructure. Metal nanoparticle (NP)-enriched nanocomposite films were formed by an additional process of the postadsorption of precursors on PECs within the nanocomposite films, which resulted in the enhancement of the catalytic and electrical properties of the composite films. Because the films contain PECs that are responsive to changes in pH and most of the NPs are embedded in the PECs, interesting catalytic properties, which are unexpected in a particle-type catalyst, were observed upon pH changes. As a result of the reversible structural changes of the films and the immobilization of the NPs within the films, the film-type catalysts showed enhanced performance and stability during catalytic reactions under various pH conditions, compared to particle-type catalysts.     

Poly(ethylene glycol) micro-patterns as environmentally sensitive template for selective or non-selective adsorption

Poly(ethylene glycol) (PEG), a hydrophilic and repulsive polymer to non-specific adsorption, was stamped onto carboxylic acid-enriched polymer surfaces using the micro-contact printing technique. The patterns are stabilized via hydrogen bonds. Areas printed with PEG were then shown to be non-adsorbed with fluorescein isothiocyanate (FITC)-labeled dextran, while the poly(methacrylic acid) (PMAA) regions could via hydrogen bonding. Due to this contrast, well defined dextran patterns were obtained. Tuned with pH and temperature, the PEG molecules could be detached from the surfaces, erasing the template. Moreover, ionization of PMAA at higher pH induced an abrupt transition to an extended conformation, weakening the interactions between PMAA and dextran. Not only the dextran patterns lose their spatial selectivity, but also the overall adsorption amount is much lower. The pH sensitivity was in a quite narrow range, i.e. around pH 5. As the hydrogen bonds are also temperature sensitive, the attach points of PEG molecules on the surfaces disappeared at higher temperature. For poly(acrylic acid) (PAA) photografted surfaces, the pH sensitivity was more complicated due to the formation of the compact complexes of PEG and PAA molecules.     

Adsorption characteristics of zwitterionic diblock copolymers at the silica/aqueous solution interface

The adsorption of a zwitterionic diblock copolymer, poly(2-(diethylamino)ethyl methacrylate)-block-poly(methacrylic acid) (PDEA59-PMAA50), at the silica/aqueous solution interface has been characterised as a function of pH. In acidic solution, this copolymer forms core-shell micelles with the neutral PMAA chains being located in the hydrophobic cores and the protonated PDEA chains forming the cationic micelle coronas. In alkaline solution, the copolymer forms the analogous inverted micelles with anionic PMAA coronas and hydrophobic PDEA cores. The morphology of the adsorbed layer was observed in situ using soft-contact atomic force microscopy (AFM): this technique suggests the formation of a thin adsorbed layer at pH 4 due to the adsorption of individual copolymer chains (unimers) rather than micelle aggregates. This is supported by the remarkably low dissipation values and the relatively low degrees of hydration for the adsorbed layers, as estimated using a combination of quartz crystal microbalance with dissipation monitoring (QCM-D) and optical reflectometry (OR). In alkaline solution, analysis of the adsorption data suggests a conformation for the adsorbed copolymers where one block projects normal to the solid/liquid interface; this layer consists of a hydrophobic PDEA anchor block adsorbed on the silica surface and an anionic PMAA buoy block extending into the solution phase. Tapping mode AFM studies were also carried out on the silica surfaces after removal from the copolymer solutions and subsequent drying. Interestingly, in these cases micelle-like surface aggregates were observed from both acidic and alkaline solutions. The lateral dimension of the aggregates seen is consistent with the corresponding hydrodynamic diameter of the copolymer micelles in bulk solution. The combination of the in situ and ex situ AFM data provides evidence that, for this copolymer, micelle aggregates are only seen in the ex situ dry state as a result of the substrate withdrawal and drying process. It remains unclear whether these aggregates are caused by micelle deposition at the surface during the substrate withdrawal from the solution or as a result of unimer rearrangements at the drying front as the liquid recedes from the surface.     

Evanescent wave cavity ring-down spectroscopy (EW-CRDS) as a probe of macromolecule adsorption kinetics at functionalized interfaces

Evanescent wave cavity ring-down spectroscopy (EW-CRDS) has been employed to study the interfacial adsorption kinetics of coumarin-tagged macromolecules onto a range of functionalized planar surfaces. Such studies are valuable in designing polymers for complex systems where the degree of interaction between the polymer and surface needs to be tailored. Three tagged synthetic polymers with different functionalities are examined: poly(acrylic acid) (PAA), poly(3-sulfopropyl methacrylate, potassium salt) (PSPMA), and a mannose-modified glycopolymer. Adsorption transients at the silica/water interface are found to be characteristic for each polymer, and kinetics are deduced from the initial rates. The chemistry of the adsorption interfaces has been varied by, first, manipulation of silica surface chemistry via the bulk pH, followed by surfaces modified by poly(L-glutamic acid) (PGA) and cellulose, giving five chemically different surfaces. Complementary atomic force microscopy (AFM) imaging has been used for additional surface characterization of adsorbed layers and functionalized interfaces to allow adsorption rates to be interpreted more fully. Adsorption rates for PSPMA and the glycopolymer are seen to be highly surface sensitive, with significantly higher rates on cellulose-modified surfaces, whereas PAA shows a much smaller rate dependence on the nature of the adsorption surface.     

A general method for the synthesis of monodisperse hollow inorganic-organic hybrid microspheres with interior functionalized poly(methacrylic acid) shells

Hollow inorganic-organic hybrid microspheres, such as silica, titania, and zirconia, with interior poly(methacrylic acid) (PMAA) functionalized shell were synthesized by a general method containing a two-stage reaction. The hollow inorganic shell-layer with interior polymeric component was formed over the PMAA template during the second-stage controlled hydrolysis of inorganic precursors together with disintegration of PMAA cores and adhering to the interior wall of the silica during the drying process due to the capillary force as well as the competitive hydrogen bond interaction. In this process, PMAA microspheres were prepared by distillation precipitation polymerization of methacrylic acid (MAA) in acetonitrile as the first-stage reaction. The present work elaborately investigated the effects of the reaction conditions, including the amount of the tetraethyl orthosilicate (TEOS) precursors and the amount of ammonium hydroxide catalyst on the morphology and structure of the resultant hollow composite microspheres, which were characterized by transmission electron microscopy (TEM), Fourier-transform infrared spectra (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption-desorption.     

Adsorption of polyelectrolyte modified graphene to silica surfaces: monolayers and multilayers

Exfoliated graphene particles stabilised by the cationic polyelectrolyte polyethyleneimine (PEI) were used in conjunction with an anionic polyelectrolyte, poly(acrylic acid), to construct multilayers using the layer-by-layer technique on a silica substrate. In the first adsorption step, the surface excess of the cationic graphene was dependent on the overall charge on the nanoparticle which in turn can be tuned through modifying solution pH as PEI has weakly ionisable charged amine groups. The adsorbed amount onto the silica surface increased as the solution pH increased. Subsequently, a layer of PAA was adsorbed on top of the cationic graphene through electrostatic interaction. The multilayer could be assembled through this alternate deposition, with the influence of solution conditions investigated. The pH of the adsorbing solutions was the chief determinant of the overall adsorbed amounts, with more mass added at the elevated pH of 9 in comparison with pH 4. Atomic force microscopy confirmed that the graphene particles were adsorbed to the silica interface and that the surface coverage of the disc-like nanoparticles was complete after the deposition of five graphene-polyelectrolyte bi-layers. Furthermore, the graphene nanoparticles themselves could be modified through the consecutive addition of the oppositely charged polymers. A multilayered assembly of negatively charged graphene sheets modified with a bi-layer of PEI and PAA was also deposited on a silica surface with adsorbed PEI.     

Light Scattering Study of the Antibody–Poly(methacrylic acid) and Antibody–Poly(acrylic acid) Conjugates in Aqueous Solutions

The effect of the conformational state of the polymer coil on the properties of protein–polymer conjugates has been studied for the conjugates of antibody (monoclonal antibody from 6C5 clone against inactivated rabbit muscle glyceraldehyde‐3‐phosphate dehydrogenase; Ab) with poly(methacrylic acid) (PMAA) or poly‐(acrylic acid) (PAA). The pH‐dependencies of molecular properties and structural parameters of aqueous solutions (radius of gyration, intensity of scattered light, hydrodynamic diameter, and polydispersity index) of Ab, PMAA, and PAA and their conjugates, i. e., Ab‐PMAA and Ab‐PAA, have been studied using static and dynamic light scattering techniques. While free Ab aggregates in solution and precipitates at its isoelectric point, the covalent attachment of a charged polymer to Ab prevents its association and shifts the precipitation point towards more acidic values (from pH 5.95 for Ab to pH ˜ 4.8 for Ab‐PMAA). The predominant role of the conformational status of the polymer in the process of conjugate precipitation has been considered. Contrary to the precipitation of Ab‐PMAA, the formation of stable colloidal particles was suggested for Ab‐PAA at pH < 4.8. In the conjugates, polymer chains surround the protein globule in an extremely compact manner while Ab significantly affects the polymer conformation. The essentially larger hydrodynamic radii of conjugates, when compared with their radii of gyration, confirm the strong interaction of conjugates with solvent molecules.     

Reparation of silica/poly(methacrylic acid)/poly(divinylbenzene-co-methacrylic acid) tri-layer microspheres and the corresponding hollow polymer microspheres with movable silica core

 Hollow poly(divinylbenzene-co-methacrylic acid) (P(DVB-co-MAA)) microspheres were prepared by the selective dissolution of the non-crosslinked poly(methacrylic acid) (PMAA) mid-layer in ethanol from the corresponding silica/PMAA/P(DVB-co-MAA) tri-layer hybrid microspheres, which were afforded by a three-stage reaction. Silica/PMAA core-shell hybrid microspheres were prepared by the second-stage distillation polymerization of methacrylic acid (MAA) via the capture of the oligomers and monomers with the aid of the vinyl groups on the surface of 3-(methacryloxy)propyl trimethoxysilane (MPS)-modified silica core, which was prepared by the Stöber hydrolysis as the first stage reaction. The tri-layer hybrid microspheres were synthesized by the third-stage distillation precipitation copolymerization of functional MAA monomer and divinylbenzene (DVB) crosslinker in presence of silica/PMAA particles as seeds, in which the efficient hydrogen-bonding interaction between the carboxylic acid groups played as a driving force for the construction of monodisperse hybrid microspheres with tri-layer structure. The morphology and the structure of silica core, silica/PMAA core-shell particles, the tri-layer hybrid microspheres and the corresponding hollow polymer microspheres with movable silica cores were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy (XPS).     

Synthesis, multilayer film assembly, and capsule formation of macromolecularly engineered acrylic acid and styrene sulfonate block copolymers

We report the use of copolymers synthesized with specific block ratios of weakly and strongly charged groups for the preparation of stable, pH-responsive multilayers. In this study, we utilized reversible addition-fragmentation chain transfer (RAFT) polymerization in the synthesis of novel pH-sensitive copolymers comprising block domains of acrylic acid (AA) and styrene sulfonate (SS) groups. The PAA x- b-SS y copolymers, containing 37%, 55%, and 73% of AA groups by mass (denoted as PAA 37- b-SS 63, PAA 55- b-SS 45, and PAA 73- b-SS 27, respectively), were utilized to perform stepwise multilayer assembly in alternation with poly(allylamine hydrochloride), PAH. The ratio of AA to SS groups, and the effect of the pH of both anionic and cationic adsorption solutions, on multilayer properties, were investigated using ellipsometry and atomic force microscopy. The presence of SS moieties in the PAA x- b-SS y copolymers, regardless of the precise composition, lead to films with a relatively consistent thickness. Exposure of these multilayers to acidic conditions postassembly revealed that these multilayers do not exhibit the characteristic large swelling that occurs with PAA/PAH films. The film stability was attributed to the presence of strongly charged SS groups. PAA x- b-SS y/PAH films were also formed on particle substrates under various adsorption conditions. Microelectrophoresis measurements revealed that the surface charge and isoelectric point of these core-shell particles are dependent on assembly pH and the proportion of AA groups in PAA x- b-SS y. These core-shell particles can be used as precursors to hollow capsules that incorporate weak polyelectrolyte functionality. The role of AA groups in determining the growth profile of these capsules was also examined. The multilayer films prepared may find applications in areas where pH-responsive films are required but large film swelling is unfavorable.     

SYNTHESIS OF POLY(DIVINYLBENZENE-co-ACRYLIC ACID) HOLLOW MICROSPHERES WITH GOLD NANOPARTICLES ON THE INTERIOR SURFACE

Poly(divinylbenzene-co-acrylic acid) (poly(DVB-co-AA)) hollow microspheres with gold nanoparticles on the interior surfaces were prepared from the gold nanoparticles-coated poly(methacrylic acid) (PMAA@Au@poly(DVB-co-AA)) core-shell microspheres by removal of the PMAA core in water.Au nanoparticles-coated PMAA microspheres were afforded by the in-situ reduction of gold trichloride with PMAA microsphere as stabilizer via the interaction between carboxylic acid groups and Au nanoparticles.Gold nanoparticle...     

Layer-by-layer assembly of salt-containing polyelectrolyte complexes for the fabrication of dewetting-induced porous coatings

The layer-by-layer (LbL) assembly of salt-containing nonstoichiometric polyelectrolyte complexes (PECs) with oppositely charged uncomplexed polyelectrolyte for the fabrication of dewetting-induced porous polymeric films has been systematically investigated. Salt-containing poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) complexes (noted as PAH-PAA) with a molar excess of PAH were LbL assembled with polyanion poly(sodium 4-styrenesulfonate) (PSS) to produce PSS/PAH-PAA films. The structure of the PAH-PAA complexes is dependent on the concentration of NaCl added to their aqueous dispersions, which can be used to tailor the structure of the LbL-assembled PSS/PAH-PAA films. Porous PSS/PAH-PAA films are fabricated when salt-containing PAH-PAA complexes with a large amount of added NaCl are used for LbL assembly with PSS. In-situ and ex-situ atomic force microscopy measurements disclose that the dewetting process composed of pore nucleation and pore growth steps leads to the formation of pores in the LbL-assembled PSS/PAH-PAA films. The present study provides a facile way to fabricate porous polymeric films by dewetting LbL-assembled polymeric films comprising salt-containing PECs.     

Formation of polyampholyte brushes via controlled radical polymerization and their assembly in solution

We describe the formation of polyampholytic block copolymer brushes and their assembly in solution. Specifically, we employ "surface-initiated" activators regenerated by electron transfer atom transfer radical polymerization (ARGET-ATRP) sequentially to form diblock copolymer grafts comprising blocks of poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) and poly(sodium methacrylate) (PNaMA) on flat impenetrable silica surfaces, i.e., SiO(x)/PNaMA-b-PDMAEMA and SiO(x)/PDMAEMA-b-PNaMA. Protonation of the PNaMA block results in formation of poly(methacrylic acid) (PMAA). We demonstrate that ARGET-ATRP of NaMA provides a convenient route to preparation of PMAA, which is an alternative method to the more traditional approach based on preparing PMAA by polymerizing tert-butyl methacrylate (tBMA) followed by cleavage of the tert-butyl group. We also discuss conformational changes of the individual polyelectrolyte blocks in solution as a function of solution pH by monitoring adsorption behavior of functionalized polystyrene spheres.     

pH响应的介孔二氧化硅纳米颗粒的制备及可控释放

选择带负电荷且溶解度和分子结构对pH值非常敏感的聚丙烯酸作为封堵分子, 采用静电吸附的修饰方法, 制备了pH响应的MCM-41型介孔二氧化硅纳米颗粒. 利用高倍透射电子显微镜(TEM)、 X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR)及比表面积分析等手段表征了介孔二氧化硅纳米颗粒的物理化学性质. 以联钌吡啶染料分子作为模式客体分子, 研究了pH调控下的模式客体分子在介孔二氧化硅纳米颗粒中的包裹及释放行为. 结果表明, 该介孔二氧化硅纳米颗粒对pH具有很好的响应性; 在近中性条件下, 带正电的二氧化硅纳米颗粒通过静电吸附作用吸附带负电的聚丙烯酸, 导致介孔封堵, 使包载的染料分子几乎无释放; 客体分子的释放率随着pH值的降低而升高, 当pH≤5时, 染料分子显著释放, pH=1时客体分子的释放率高达98％, 可以实现对包载客体分子的控制释放. 该pH响应的介孔二氧化硅纳米颗粒载体具有制备简便、 价格低廉和包载量大等优点, 有望应用于药物的控制释放.     

Studies on interpolymer self-organisation behaviour of protoporphyrin IX bound poly(carboxylic acid)s with complimentary polymers by means of fluorescence techniques

Covalently bound protoporphyrin IX was used as a fluorophore to investigate the interpolymer complex formation between the poly(carboxylic acid)s, PMAA/PAA and poly(N-vinyl pyrrolidone), PVP, poly(ethylene oxide), PEO or poly(ethylene glycol), PEG. Absorption and emission spectral properties of protoporphyrin IX bound to PAA, PMAA and PVP have been studied. Protoporphyrin IX in poly(MAA-co-PPIX) was found to be present in the dimer or higher aggregated form at low pH due to the environmental restriction imposed by the polymer whereas in the case of poly(AA-co-PPIX) and poly(VP-co-PPIX), PPIX exists in monomeric form. The fluorescence intensity and lifetime of PPIX bound to poly(carboxylic acid)s increase on complexation through hydrogen bonding with PVP, PEO and PEG due to the displacement of water molecules in the vicinity of the PPIX. Poly(MAA-co-PPIX) shows longer fluorescence lifetime due to the more compact interpolymer complexation as compared to poly(AA-co-PPIX) due to the enhanced hydrophobicity of PMAA. Poly(VP-co-PPIX) shows a decrease in the fluorescence lifetime on complexation with PMAA or PAA due to the hydrophilic and microgel like environment of the fluorophore bound to PVP. The contrasting behaviour of the same polymer adduct with respect to the site of the fluorophore is interpreted to be due to the solvent structure which determines the environment of the fluorophore.     

On the stability of (highly aggregated) polyelectrolyte complexes containing a charged-block-neutral diblock copolymer

Using light scattering and cryogenic transmission electron microscopy, we show that highly aggregated polyelectrolyte complexes (HAPECs) composed of poly([4-(2-aminoethylthio)butylene] hydrochloride)49-block-poly(ethylene oxide)212 and poly(acrylic acid) (PAA) of varying lengths (140, 160, and 2000 monomeric units) are metastable or unstable if the method of preparation is direct mixing of two solutions containing the oppositely charged components. The stability of the resulting HAPECs decreases with decreasing neutral-block content and with increasing deviation from 1:1 mixing (expressed in number of chargeable groups) of the oppositely charged polyelectrolytes, most probably for electrostatic reasons. The difference between the metastable and stable states, obtained with pH titrations, increases with increasing PAA length and increasing pH mismatch between the two solutions with the oppositely charged components.     

Self-association of water-soluble fluorinated diblock copolymers in solutions

The self-association of the fluorinated diblock copolymer, poly(methacrylic acid)-block-poly(perfluorooctylethyl methacrylate) (PMAA-b-PFMA), in water has been investigated by light scattering, potentiometry, atomic force microscopy, and transmission electron microscopy. The size of the polymer micelles increases, as the degree of dissociation of the PMAA blocks increases. Since the charged PMAA block takes the stretched structure, PMAA-b-PFMA can easily form large micelles due to the low steric hindrance of PMAA blocks. Addition of NaCl shielded electrostatic repulsion in the PMAA chain and induced the formation of smaller micelles than water without NaCl did because of the bulky structure of the PMAA chain in the shell of the micelles. The micelle of PMAA-b-PFMA in ethanol is larger than that of poly(t-butyl methacrylate)-block-poly(perfluorooctylethyl methacrylate) (PtBMA-b-PFMA) in ethanol as a result of the higher steric hindrance of the PtBMA block. The dimensions of the core and shell of the micelles were estimated. The micelle of PMAA-b-PFMA in water possesses a rather thick shell and a large volume per molecule, consistent with the extended PMAA chain. On the other hand, the shell of the micelle in an ethanol solution of PtBMA-b-PFMA is thin but has a large surface area. Facts are consistent with the shrunk structure of the PtBMA block in poor solvent.     

Adsorption of bacteria and polycations on model surfaces of cellulose, hemicellulose and wood extractives studied by QCM-D

Quartz crystal microbalance with dissipation monitoring (QCM-D), atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM) were used as the tools to study the adsorption of bacteria onto surfaces of silica and polystyrene coated with materials related to papermaking. Cationic polyelectrolytes used as fixatives and retention aids in paper industry were found to promote irreversible adsorption of the ubiquitous white water bacterium, Pseudoxanthomonas taiwanensis, onto model surfaces of cellulose (pH 8). The high charged low molecular weight polyelectrolyte, poly(diallyldimethyl) ammonium chloride (pDADMAC) adsorbed to silica surface as a flat and rigid layer, whereas the low charged cationic polyacryl amide (C-PAM) of high molecular weight adsorbed as a thick and loose layer. AFM images showed that the polyelectrolytes accumulated as layers around each bacterial cell. In the presence of wood hemicellulose (O-acetyl-galactoglucomannan) the bacteria adsorbed massively, as large, tightly packed rafts (up to 0.05mm in size) onto the polystyrene crystal surface coated with wood extractives (pH 4.7). AFM and FESEM micrographs also showed large naked areas (with no bacteria) in between the bacterial rafts on the crystal surface. In this case, QCM-D only incompletely responded to the massiveness of the bacterial adsorption. The results indicate that cationic polymers can be used to increase the retention of bacteria from the process water onto the fibre web and that, depending on the balance between hemicelluloses and wood extractives and pH of the process waters, bacteria can be drawn from process waters onto surfaces.     

ANTIFOULING PROPERTIES OF POLYVINYL CHLORIDE) MEMBRANES MODIFIED BY AMPHIPHILIC COPOLYMERS P(MMA-A-MAA)

Three well-defined diblock copolymers of poly(methyl methacrylate-b-methacrylic acid)(P(MMA-b-MAA))were synthesized using atom transfer radical polymerization method and varying poly(methacrylic acid)(PMAA)chain lengths. These copolymers were blended with PVC to fabricate porous membranes via phase inversion process.Membrane morphologies were observed by scanning electron microscopy(SEM),and chemical composition changes of the membrane surfaces were measured by X-ray photoelectron spectroscopy(XPS).Static and dynamic protein adsorption experiments were used to evaluate antifouling properties of the blend membranes.It was found that,the blend membranes containing longer PMAA arm length showed lower static protein adsorption,higher water permeation flux and better protein solution flux recovery.     

pH-dependent immobilization of proteins on surfaces functionalized by plasma-enhanced chemical vapor deposition of poly(acrylic acid)- and poly(ethylene oxide)-like films

The interaction of the proteins bovine serum albumin (BSA), lysozyme (Lys), lactoferrin (Lf), and fibronectin (Fn) with surfaces of protein-resistant poly(ethylene oxide) (PEO) and protein-adsorbing poly(acrylic acid) (PAA) fabricated by plasma-enhanced chemical vapor deposition has been studied with quartz crystal microbalance with dissipation monitoring (QCM-D). We focus on several parameters which are crucial for protein adsorption, i.e., the isoelectric point (pI) of the proteins, the pH of the solution, and the charge density of the sorbent surfaces, with the zeta-potential as a measure for the latter. The measurements reveal adsorption stages characterized by different segments in the plots of the dissipation vs frequency change. PEO remains protein-repellent for BSA, Lys, and Lf at pH 4-8.5, while weak adsorption of Fn was observed. On PAA, different stages of protein adsorption processes could be distinguished under most experimental conditions. BSA, Lys, Lf, and Fn generally exhibit a rapid initial adsorption phase on PAA, often followed by slower processes. The evaluation of the adsorption kinetics also reveals different adsorption stages, whereas the number of these stages does not always correspond to the structurally different phases as revealed by the D- f plots. The results presented here, together with information obtained in previous studies by other groups on the properties of these proteins and their interaction with surfaces, allow us to develop an adsorption scenario for each of these proteins, which takes into account electrostatic protein-surface and protein-protein interaction, but also the pH-dependent properties of the proteins, such as shape and exposure of specific domains.