水产品中螺旋霉素、替米考星、泰乐菌素与北里霉素残留量的超高效液相色谱-紫外检测法同时测定

建立了水产品肌肉组织中螺旋霉素、替米考星、泰乐菌素、北里霉素同时测定的超高效液相色谱-紫外检测(UPLC-TUV)方法。样品经乙腈提取后,浓缩至近干,用4%NaCl溶解残渣,正己烷除脂,经固相萃取小柱净化,乙腈洗脱;以乙腈-25 mmol/L磷酸二氢铵(pH2.5,含10%乙腈)为流动相,以ACQUITYUPLC BEHC18为分离柱,柱温为45℃,流速为0.3 mL/min,紫外检测。方法在0.100~20.0 mg/L范围内呈线性相关,螺旋霉素、替米考星、泰乐菌素和北里霉素的相关系数分别为0.998 7、0.999 3、0.999 4和0.998 0。平均回收率为70%~102%,相对标准偏差为2.9%~11.2%,螺旋霉素、替米考星、泰乐菌素和北里霉素的检出限分别为25、25、50、75μg/kg。方法满足水产品肌肉组织中螺旋霉素、替米考星、泰乐菌素和北里霉素的残留量测定。     

肉食品中常见4种抗生素残留的高效液相色谱分析

建立了同时测定肉食品中泰乐菌素、替米考星、氯霉素、氟苯尼考的高效液相色谱方法,样品经乙腈提取,正己烷脱脂, HLB小柱净化后,以C18反相色谱柱为分离柱,甲醇－磷酸二氢钠缓冲溶液(pH 3.0,含体积比为10％的甲醇溶液）为流动相进行梯度洗脱,检测波长λ为275 nm.泰乐菌素、替米考星、氯霉素、氟苯尼考的线性范围是0.1～20.0 mg/L,相关系数分别为0.9987、0.9992、0.9985、0.9970.其平均回收率为75％～87%,相对标准偏差为1.35％～5.41％,泰乐菌素、替米考星、氯霉素、氟苯尼考的检出限分别为20、32、19、16μg/kg.方法满足肉食品中泰乐菌素、替米考星、氯霉素、氟苯尼考的残留量测定.     

固相萃取净化/高效液相色谱-串联质谱法测定饲料中7种大环内酯类药物含量

建立了添加剂预混合饲料、精料补充饲料、配合饲料和浓缩饲料中7种大环内酯类药物(替米考星、罗红霉素、螺旋霉素、泰乐菌素、红霉素、克拉霉素和阿奇霉素)含量的高效液相色谱-串联质谱(HPLC-MS/MS)测定方法。饲料样品经1%氨化乙腈提取,Oasis PRiME HLB固相萃取柱净化后,采用ACQUITY UPLC BEH C_(18)色谱柱(2.1 mm×100 mm,1.7μm)分离,以0.1%甲酸水-乙腈为流动相梯度洗脱,电喷雾离子源正离子模式下检测,外标法定量。结果表明,替米考星、螺旋霉素和红霉素的线性范围为0.5～50μg/L(r~20.99),罗红霉素、泰乐菌素、克拉霉素和阿奇霉素的线性范围为0.25～50μg/L(r~20.99);7种待测物的检出限(LOD)为1.25～2.5μg/kg,定量下限为2.5～5.0μg/kg,5、10、50μg/kg 3个加标浓度下的平均回收率为61.4%～103%,批内和批间相对标准偏差为0.43%～15%。该方法简便、快速、灵敏,基质干扰小,适用于各类饲料中大环内酯类药物的常规监测和定量测定。     

高效液相色谱串联质谱法测定牛奶中林可酰胺类和大环内酯类抗生素残留量的研究

建立了牛奶样品中洁霉素、氯洁霉素、红霉素、螺旋霉素、交沙霉素、泰乐菌素、竹桃霉素等7种林可酰胺类及大环内酯类药物残留量的确证方法。用乙腈萃取样品中7种林可酰胺类及大环内酯类抗生素,然后用正己烷脱脂,旋转蒸发仪浓缩,以Luna C18(2)色谱柱分离,在正离子模式下以电喷雾电离串联质谱仪进行测定。在20、50、200μg/kg 3个浓度水平进行验证试验,方法的线性范围为20~200μg/kg,总体平均回收率为74.5%~97.5%,相对标准偏差为2.7%~11.3%。该方法各项技术指标满足国内外法规的要求,可用于牛奶样品中林可酰胺类及大环内酯类抗生素残留量的确证检测。     

高效液相色谱-串联质谱法同时检测动物性食品中多种大环内酯类药物

高效液相色谱-串联质谱法同时检测动物性食品中6种大环内酯类药物泰乐霉素、交沙霉素、柱晶白霉素、螺旋霉素、替米考星和红霉素残留。样品经乙腈提取,C18固相萃取柱净化,以0.1%(φ)甲酸-乙腈和0.1%(φ)甲酸-水作流动相梯度洗脱。电喷雾正离子MRM模式检测,罗红霉素作为内标。方法的定量下限为20μg/kg。在2~50μg/L范围内,峰面积与质量浓度成良好的线性关系,相关系数大于0.999。样品在20、100、200μg/kg添加水平的回收率为70%~110%,相对标准偏差为4.1%~10.3%(n=6)。方法灵敏、检出限低、实用性强。     

高效液相色谱法测定动物组织中四环素类抗生素残留量的研究

建立了动物组织中四环素、金霉素、土霉素、强力霉素、去甲基金霉素、甲烯土霉素和二甲胺四环素等7种四环素类抗生素残留量的液相色谱同时测定方法。方法采用Inertsil C8-3(5μm,250 mm×4.0 mm i.d)反相色谱柱,以pH 4.0的EDTA-Mcllvaine缓冲溶液为提取溶液,以HLB固相萃取柱为净化柱,流动相为甲醇+乙腈+0.01mol/L三氟乙酸(梯度洗脱),流速1.5 mL/min,检测波长350 nm,进样量100μL。方法的检出限为1.5~5.0μg/kg,测定低限为50μg/kg,线性范围为50~1200μg/kg,加标回收率为73.8%~103%,相对标准偏差为0.5%~8.5%。方法适用于动物肌肉、肝脏和肾脏组织中7种四环素类抗生素残留量的同时检测。     

HPLC-MS/MS检测猪肉中六种大环内酯类抗生素

建立了以高效液相色谱-质谱(HPLC-MS/MS)检测猪肉中替米考星(TILM)、红霉素(ERY)、泰乐菌素(TYL)、吉他霉素(KIT)、罗红菌素(ROX)及交沙霉素(JOS)等6种大环内酯类抗生素的多残留分析方法.样品用乙腈提取后,经正己烷脱脂,过C18 柱净化,4%氨甲醇洗脱后经氮气吹干,采用多反应监测,对6种大环内酯类药物作定性和定量分析.在10～1000μg/L的范围内,6种药物线性良好(R>0.998).在50、100、200μg/Kg添加水平下,6种药物的回收率在62.2%～102%,相对标准偏差为2.7%～16%.替米考星和吉他霉素的检出限(S/N=3)为0.1μg/Kg,其它药物为0.05μg/kg.     

超高效液相色谱-串联质谱法对动物源食品中13种林可胺类及大环内酯类药物残留的检测

建立了动物源食品中林可霉素、克林霉素、吡利霉素、红霉素、泰乐菌素、螺旋霉素、替米考星、竹桃霉素、吉他霉素、克拉霉素、阿奇霉素、罗红霉素和交沙霉素13种林可胺类和大环内酯类药物残留检测的超高效液相色谱-串联质谱分析方法.动物组织样品经乙腈提取后,用正己烷去除脂肪等杂质,然后用Waters Acquity UPLC BEH C18色谱柱分离,以乙腈和50 mmol/L乙酸铵水溶液为流动相进行梯度洗脱,电喷雾正离子(ESI+)模式电离,多反应监测模式检测.结果表明:13种药物在5 ～200 μg/L范围内呈现良好的线性关系,相关系数R2均大于0.990,13种药物在动物组织中的检出限均为1 μg/kg,定量下限均为2.5 μg/kg.以2.5、25、100 μg/kg 3个水平进行回收实验,13种药物的回收率为72% ～104%,批内批间相对标准偏差为4.8% ～14.3%.     

高效液相色谱串联质谱法测定动物组织中林可酰胺类和大环内酯类抗生素残留

建立了动物组织样品中洁霉素、氯洁霉素、红霉素、螺旋霉素、交沙霉素、泰乐菌素、竹桃霉素等7种林可酰胺类及大环内酯类药物多残留的液/质联用确证方法。用乙腈萃取样品中7种林可酰胺类及大环内酯类抗生素,然后用正己烷脱脂,旋转蒸发仪浓缩,以LunaC18(2)色谱柱为分离柱,在正离子模式下以电喷雾电离串联质谱仪进行测定。方法的检出限为0.05~5.3μg/kg。在20、50、200μg/kg3个浓度水平进行验证实验,方法的线性范围为20~200μg/kg;总体平均回收率为70.3%~102%;相对标准偏差为2.4%~16.6%。本方法简便、快速、准确,各项技术指标满足国内外法规的要求,可用于动物组织样品中林可酰胺类及大环内酯类抗生素残留的确证检测。     

固相萃取-高效液相色谱法同时测定牛奶中13种磺胺残留

建立了固相萃取-高效液相色谱同时测定牛奶中13种磺胺类药物残留的方法。样品经乙腈溶液漩涡超声提取后,采用自制碱性氧化铝固相萃取小柱(SPE)净化,洗脱液减压浓缩至近干后用流动相溶解并定容,过PTFE滤膜后在Thermo Fisher Scientific ODS hypersil色谱柱上,以乙腈-20 mmol/L H3PO4溶液为流动相进行梯度洗脱,检测波长为270 nm。13种磺胺在50~5000μg/L范围内具有良好的线性,相关系数≥0.999,检出限为2.0~4.2μg/L,定量限为8.9~14.2μg/L。在20,50,100μg/L添加水平的加标回收率为79.0%~118.2%,相对标准偏差在2.7%~6.9%之间。方法能对牛奶中13种磺胺类药物残留实现准确定量分析。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.