Theoretical investigation on conformational preferences and structural properties of 2-lithio-1,3-diphosphinane and 2-lithio-1,3-dimethyl-1,3-diphosphinane

A new family of dialphosphacyclohexane is introduced which has three nucleophilic centers. The conformational stabilities and structural properties of 2-lithio-1,3-diphosphinane and 2-lithio-1,3-dimethyl-1,3-diphosphinane were investigated computationally by DFT calculations and NBO analyses at B3LYP/6-31+G(d,p). Relative energy trend in 1,3-diphosphinane and 1,3-dimethyl-1,3-diphosphinane conformations explored from steric and hyperconjugative point of view. The stability trend of 2-lithio derivatives based on calculated relative energies in 1,3-diphosphinane is 1d > 1f > 1b > 1a > 1c > 1e and for 1,3-dimethyl-1,3-diphosphinane derivatives is 2f > 2d > 2b > 2a > 2c > 2e. Calculated NBO atomic charges indicate that high positive charge at lithium and small C–Li Wiberg bond indexes in these derivatives are demonstrators of ionic nature of the C–Li bonds. Stereoelectronic interactions, polarizability of phosphorus, and chelate formation between each of phosphorous and lithium are determining factors in stability trend observed in these derivatives. Ease of lithiation in bis(dimethylphosphino)methane, 1,3-diphosphinane, and 1,3-dimethyl-1,3-diphosphinane derivatives was estimated and compared by isodesmic reaction.     

One-pot microwave-assisted solvent-free synthesis,theoretical and experimental studies on barrier rotation of C–N bond of N-alkenyl-1,2,3-triazoles

The reactions on benzotriazoles continue to happen to reach interesting varieties of their derivatives. This study reports a fast one-pot microwave-assisted solvent-free synthesis of N-alkenyl-1,2,3-benzotriazole (3, 5, and 7) and 1-(2-Alkyloxycarbonyl-vinyl)-1H-[1–3] triazole-4-carboxylic acid methyl ester (8 and 9) derivatives by nucleophilic addition reactions of 1,2,3-benzotriazole (C₆H₅N₃) (1) and 1H-[1–3] triazole-4-carboxylic acid methyl ester (C₄H₄N₃O₂) (1′) with R-propiolates (R = Me, Et; 2 & 4) and phenylacetylene 6 in good yields. The values of activation energy for rotation around C–N bond in the synthesized N-alkenyl-1,2,3-triazole compounds were studied by DFT-B3LYP/6-31G* method.     

Two efficient methods for the synthesis of novel indole-based chalcone derivatives

Two powerful methods for the synthesis of indole-based chalcone derivatives, namely (E)-1-(2-chloro-1-(4-chlorobenzyl)-1H-indol-3-yl)-3-aryl(hetaryl)prop-2-en-1-ones (3a–l), are described, involving the ultrasound-assisted or solvent-free Claisen–Schmidt condensation reaction of 3-acetyl-2-chloro-1-(4-chlorobenzyl)indole (1) and various aromatic aldehydes (2a–l). The ultrasound-assisted Claisen–Schmidt condensation reaction was carried out using 1,4-dioxane as solvent and KOH as base at room temperature to give the corresponding products (3a–l) in yields ranging from 75 to 88 %. Alternatively, the Claisen–Schmidt condensation reaction could also be conducted under solvent-free conditions to obtain the products (3a–l) in comparable yields. The two procedures offer easy access to indole-based chalcone derivatives in short reaction times and good yields under mild conditions. Particularly, the advantageous aspect of the solvent-free method could avoid the use of environmentally hazardous and toxic solvents, and also reduced costs. The structures of all the newly synthesized indole-based chalcones 3a–l were confirmed by spectral data and elemental analyses.     

Synthesis and antimicrobial activity of novel chalcone derivatives

A series of novel 3-[N, N-bis(2-hydroxyethyl)-amino]-chalcone derivatives 3a–3j were synthesized by the aldol condensation of [N, N-bis(2-hydroethyl)-3-amino]-acetophenone 2 with aromatic aldehydes. Their structures were further confirmed by ESI-HRMS, ¹H NMR, IR and elemental analysis. X-ray analysis reveals crystal 3b is a monoclinic system with P2₁/n space group. The antimicrobial activities of the newly synthesized chalcones in vitro were evaluated and the results indicated that most compounds presented moderate to good antimicrobial activities, especially the antifungal capability. Compounds 3a, 3d, 3f and 3g revealed obvious potency against Candida albicans with MIC values of 32 μg/mL, which were better compared with others.     

fac-Cobalt(III)-azido complexes derived from substituted pyridyl-based tridentate amines

Four new mononuclear triazido-cobalt(III) complexes [Co(L ^1/2/4 )(N₃)₃] and [Co(L ³ )(N₃)₃]·CH₃CN where L ¹  = [(2-pyridyl)-2-ethyl]-(2-pyridylmethyl)-N-methylamine, L ²  = [(2-pyridyl)-2-ethyl]-[6-methyl-(2-pyridylmethyl)]-N-methylamine, L ³  = [(2-pyridyl)-2-ethyl]-[3,5-dimethyl-4-methoxy-(2-pyridylmethyl)]-N-methylamine, and L ⁴  = [(2-pyridyl)-2-ethyl]-[3,4-dimethoxy-(2-pyridylmethyl)]-N-methylamine, respectively, were synthesized and structurally characterized. The four complexes were characterized by elemental microanalyses, IR and UV–VIS spectroscopy and X-ray single crystal crystallography. The complexes display two strong IR bands over the frequency region 2,020–2,050 cm^?1 assigned for the asymmetric stretching frequency, ν_a(N₃) of the coordinated azides indicating facial geometry. The molecular structure determinations of the complexes were in complete agreement with fac-[Co(L)(N₃)₃] conformation in distorted octahedral Co(III) environment.     

Synthesis of 5-phenyl-3-(10H-phenothiazinyl)-Δ2-cyclohexen-1-ones by conventional and microwave-assisted methods and their antifungal activity

A series of 5-phenyl-3-(10H-phenothiazinyl)-Δ²-cyclohexen-1-ones were prepared using conventional and microwave-assisted methods. The condensation between 3-phenyl-1-(10H-phenothiazinyl) prop-2-en-1-one derivatives (3a–g) and acetyl acetone yielded 5-phenyl-3-(10H-phenothiazinyl)-Δ²-cyclohexen-1-one derivatives (7a–g). The products were characterized by UV, IR, ¹H NMR, ¹³C NMR, 2D-NMR, MS, and elemental analysis. In vitro antifungal activity was carried out by zone of inhibition method against four species, namely Aspergillus niger, Candida albicans, Microsporum gypseum, and Aspergillus flavus. Compounds 7a and 7d showed good antifungal activity with zones of inhibition of 17 and 18 mm, respectively, and comparable with the standard substance, Bavinston, with 20 mm.     

Syntheses and extraction properties of novel biscalixarene and thiacalix[4]arene hydrazone derivatives

By reacting thiacalix[4]arene with p-tosyloxyethoxylbenzaldehyde 1, 3-bis(benzaldehyde-4-oxyethyloxy)-p-tert-butylthiacalix[4]arene (2) were prepared in yield of 65%. Refluxing compound 2 with aniline, salicylic hydrazide, nicotinic hydrazide and isonicotinic hydrazide, novel ringopening 1,3-bis-arylformyl-hydrazone substituted thiacalix[4]arene derivatives (3a–3d) were obtained in yields of 77–89%. Refluxing compound 2 with o-phenylendiamine, oxalyl dihydrazide, malonic dihydrazide and adipic dihydrazide in “1 + 1” intermolecular condensation mode under diluted condition, novel 1,3-bis-acyl hydrazone-bridged calix[4]arene derivatives (4a–4d) were prepared in good yields. Moreover, by condensating compound 2 with 1,3-bis(hydrazinocarbonyl-methoxy)-p-tert-butylcalix[4]arene (5), the first example of hydrazone-bridged biscalixarene (6) with calix[4]arene and thiacalix[4]arene subunits was facilely synthesized in yield of 90%. The noncompetitive and competitive extracting experiments showed that these novel hosts were good receptors for both metal cations and α-amino acids. Compounds 3a–3d and 4a–4d showed similar binding properties with high extraction percentage but low extracting selectivities. Biscalixarene 6 exhibited not only high extracting abilities but also good extracting selectivities.     

Synthesis and anticancer activities of 1,4-phenylene-bis-<Emphasis Type="Italic">N</Emphasis>-acetyl- and <Emphasis Type="Italic">N</Emphasis>-phenylpyrazoline derivatives

Novel 1,4-phenylene-bis-N-acetyl- (3a–h) and bis-N-phenylpyrazoline derivatives (4a–h) were obtained by addition of hydrazine hydrate and phenylhydrazine to bis-chalcone derivatives (1a–h) in acetic acid and acetic acid/ethanol for 4 and 8 h in reflux conditions, respectively. The structures of the obtained bis-N-acetylpyrazoline and bis-N-phenylpyrazoline derivatives were characterized by nuclear magnetic resonance (NMR) and infrared (IR) spectroscopic methods and elemental analysis. Compounds 3a–h and 4a–h were investigated to evaluate their anticancer activities against C6 (rat brain tumor cells) and HeLa (human uterus carcinoma) in vitro using a dose-dependent assay from 5 to 100 μM with 5-fluorouracil (5-FU) as standard anticancer drug. Compound 3a showed higher cell-selective activity compared with 5-FU against HeLa cells. Compounds 3a–h (except 3d) were shown to have better activities than 5-FU against both cells, particularly at high concentration. Compound 4c showed higher cell-selective activity compared with 5-FU against C6 cells. Compound 3a may be particularly promising as an anticancer drug against HeLa cells.     

Microwave promoted improved regioselective synthesis of 1H,3H,6H[2]benzopyrano[4,3-d]pyrimidine-2,4-diones by radical cyclisation

In this work, two new effective methodologies have been adopted for the preparation of 5-(2′-bromobenzyloxy)pyrimidine-2,4-diones 6(a–k). In the first methodology, 5-hydroxy uracils 4(a–f) were alkylated with 2-bromobenzyl bromide 5a or 2-bromo-5-methoxy benzyl bromide 5b under phase transfer catalysis condition using lithium hydroxide/tetrabutyl ammonium bromide in N,N-dimethylformamide at 45 °C, and in the second method, the microwave irradiation (MWI) protocol has been exploited by mixing 5-hydroxy uracils 4(a–f) with 30 % excess of 2-bromobenzyl bromide 5a or 2-bromo-5-methoxy benzyl bromide 5b. A catalytic amount of TBAB and potassium carbonate was added and irradiated in an open Erlenmeyer flask in a microwave oven for 3–12 min. The tributyltin hydride-mediated radical cyclisation of 6(a–k) was carried out under MWI to generate 1H,3H,6H[2]benzopyrano[4,3-d]pyrimidine-2,4-diones 7(a–k) in 80–89 % yield, and the reaction time was shortened compared to the previously reported conventional radical cyclisation method.     

Theoretical study on the singlet and triplet potential energy surfaces of NH (X3Σ−) + HCNO reaction

Both the singlet and triplet potential energy surfaces (PESs) of the NH (X³Σ^?) + HCNO reaction have been investigated at the BMC-CCSD level based on the UB3LYP/6-311++G(d, p) structures. The results show that the title reaction is more favorable through the singlet potential energy surface than the triplet one. For the singlet potential energy surface of the NH (X³Σ^?) + HCNO reaction, the most feasible association of NH (X³Σ^?) with HCNO is found to be a non-barrier nitrogen-to-carbon attack forming the adduct a (trans-HNCHNO), which can isomerize to the adduct b (cis-HNCHNO). The most feasible channel is that the 1, 3-H shift with N2–H2 and C–N1 bonds cleavage associated with the N1–H2 bond formation of adduct a leads to the product P ₁ (HCN + HNO). Moreover, P ₂ (HNC + HNO) should be the competitive product. The other products, including P ₃ (NH₂ + NCO) and P ₄ (N₂H₂ + CO), are minor products. The product P ₁ can be obtained through two competitive channels Path 1: R → a → P ₁ and Path 3: R → b → d → P ₁ , whereas the product P ₂ can be formed through Path 2: R → b → d → P ₂ . At high temperatures, the nitrogen-to-nitrogen approach may become feasible. For the triplet potential energy surface of the NH (X³Σ^?) + HCNO reaction, the Path 10: R → ³ a → ³ a ₁ → P ₁ should be the most feasible pathway due to the less reaction steps and lower barriers. These conclusions will have impacts on further experimental investigations.     

Preparation and characterization of new photosensitive and optically active poly(amide-imide)s from N-trimellitylimido-L-amino acid and dibenzalacetone moiety in the main chain

Six new photosensitive and optically active poly(amide-imide)s 8a–8f with good inherent viscosities based on dibenzalacetone moiety were synthesized from the direct polycondensation reaction of N-Trimellitylimido-L-amino acids 3a–3f with 2,5-bis(4-aminobenzylidene)cyclopentanone 7 by two different methods such as direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone/triphenyl phosphite/calcium chloride/pyridine and direct polycondensation in a tosyl chloride/pyridine (py)/N,N-dimethylformamide system. Diamine 7 was synthesized by using a two-step reaction. At first 2,5-bis(4-nitrobenzylidene)cyclopentanone 6 was prepared from the reaction of two equimolars 4-nitrobenzaldehyde 5 and one equimolar cyclopentanone 4 and dinitro compound 6 was reduced by using Na2S. Also N-trimellitylimido-L-amino acids 3a–3f were synthesized by the condensation reaction of trimellitic anhydride 1 with two equimolars of various L-amino acids 2a–2f in an acetic acid solution. The polymerization reactions produced a series of photosensitive and optically active poly(amide-imide)s with high yield and good inherent viscosity. The resulted polymers were fully characterized by means of FTIR and ¹H-NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation, solubility tests, UV-VIS spectroscopy, differential scanning calorimeter, thermogravimetric analysis, and derivative of thermogravimetric. These macromolecules exhibited maximum UV-VIS absorption at around 395 and 265 nm in a N,N-dimethylformamide solution.     

Studies on the Suzuki reaction on methyl 1-(2-bromoaryl)-5-oxo-3-aryl/heteroaryl-pyrrolidin-2-carboxylate derivatives: synthesis of N-aryl modified monocyclic γ-lactam derivatives in search for newer antibacterial agents

A large number of novel N-aryl modified monocyclic γ-lactam derivatives have been prepared via Pd(0) catalyzed heteroarylation in the N-aryl part of (±) cis and (±) trans γ-lactam carboxylate derivatives 3(a–f) and 6(a–f), respectively, with furan-2-boronic acid and thiophen-2-boronic acid. (±) cis Methyl 1-(2-bromoaryl)-5-oxo-3-aryl/heteroarylpyrrolidin-2-carboxylate derivatives 3(a–f), were prepared in good yields from 1(a–f) via hydrolysis, stereoselective decarboxylation, followed by esterification. Corresponding trans isomers 6(a–f) were prepared by the standard method already reported by us.     

Synthesis, structure, and electronic calculations of group VII substituted pyridazines

A series of 5,6-fused ring cyclopentadienyl tricarbonyl manganese and rhenium complexes, [M(CO)₃{η ⁵-1,2-C₅H₃(1,4-(R)₂N₂C₂}] (2a–3d) were isolated by employing an off-metal ring closure route. Reacting thallium cyclopentadienide (Cp) salts (1a–d) with [MBr(CO)₅] (M = Mn, Re) provided pyridazyl complexes (2a–3d) in high yield (75–99 %). Spectroscopic characterization (NMR, IR, MS) confirmed the identity of the desired organometallic pyridazines. The off-metal synthetic pathway employed did improve upon the isolation of these complexes as compared to previously reported routes. The molecular and electronic structure of complexes 2a–3d and their optimal energy structures have been characterized with quantum chemistry calculations. Vibrational frequencies calculated were compared to their experimental counterparts. The excited state calculations predict that the dominant low-energy transition involves a ligand-to-metal charge transfer.     

The structure and thermal properties of novel DOPO-containing 1,3-benzoxazines

Three DOPO (9,10-dihydro-9-oxa-10-phospha-phenanthrene-10-oxide)-containing benzoxazin (3a–3c) were successfully prepared from 2-hydroxybenzaldehyde, p-substituted aniline, and DOPO by a three-step procedure. Since the phosphorus and the adjacent aliphatic carbon are both chiral centers, two pairs of enantiomers exist in 3a, 3b, or 3c. Compound 3a′, which is a pair of enantiomers existing in 3a, was isolated using recrystallization in ethyl acetate solvent. All the structures were confirmed by FT-IR, NMR, and MS spectra. The X-ray analysis indicated that the 3a′ is the RR/SS enantiomers and belongs to the monoclinic crystal system, its space group being P2₁/c. The thermal properties were investigated by DSC and TG. It has been found that the peak temperature of thermally induced ring-opening reaction was around 260–270 °C. Compounds (3a–3c, 3a′, and 3c′) had two similar thermal processes from 50 to 600 °C in TG, whereas the compound 3b′ had three thermal processes. The char yields of 3a–3c were 18.10, 16.84, and 16.34 %, respectively, while those of 3a′–3c′ were 26.00, 31.80, and 19.21 %, respectively. The results indicated that compounds 3a′–3c′ had better char properties than 3a–3c.     

Syntheses and characterization of a new class of vanadia precursors of oxime-modified oxovanadium(V) isopropoxide,crystal and molecular structure of [VO{ONC10H16}3]

Modification of [VO(OPrⁱ)₃] with oximes in different molar ratios, yielded new class of vanadia precursors, [VO{OPrⁱ}_3?n{L}_n] {where, n = 1–3 and LH = C₉H₁₆C=NOH (1–3) and (CH₃)₂C=NOH (4–6)}.All the products are yellow in colour. (1) and (2) are liquid/viscous liquid, while others are solids. Molecular weight measurements of all these derivatives and the ESI-mass spectral studies of (1), (2), (3) and (5) indicate their monomeric nature. ¹H and ¹³C{¹H} NMR spectra suggest that the oximato moieties are monodentate in solution which was further confirmed by the ⁵¹V NMR signals, appeared in the region expected for tetra-coordinated oxo-vanadium atoms. On ageing, a disproportionation reaction occurs in (1) and some crystals appeared. Single crystal X-ray diffraction analyses of the crystals obtained from (1) as well as from (3) were found to be the same and indicate the presence of side-on {dihapto η ²-(N, O)} binding modes of the oximato ligands, leading to the formation of seven coordination environment around the vanadium atom. Thermogravimetric curve of (1) exhibits multi-step decomposition with the formation of V₂O₅ as the final product at ~850 °C. Sol–gel transformation of (3) yielded (a) VO₂ sintered at 300 °C and (b) V₂O₅ at 600 °C. Similarly, sol–gel transformations of (1) and (2) yielded V₂O₅ (c) and (d) at 600 °C, respectively. Formation of monoclinic phase in (a) and orthorhombic phase in (b), (c) and (d) were confirmed by powder XRD patterns.     

Nickel(II)-α-diimine complexes containing naphthyl substituents for ethylene polymerization under low ethylene pressure

Two new α-diimine containing Ni(II) complexes, {bis[N,N′-(2,6-dimethyl-4-naphthylphenyl)imino]-1,2-dimethylethane}dibromonickel 3a and {bis[N,N′-(2-methyl-4-naphthylphenyl)imino]-1,2-dimethylethane}dibromonickel 3b were synthesized and characterized. The crystal structures of representative ligand 2a and its complex 3a were determined by X-ray crystallography. Complex 3a bearing 2,6-dimethyl and 4-naphthyl groups, activated by diethylaluminum chloride (DEAC), shows high catalytic activity for the polymerization of ethylene [4.43 × 10⁶ g PE/(mol Ni h bar)]. Interestingly, complexes 3a and 3b bearing the naphthyl substituent in the para-aryl position produced dendritic polyethylenes (branching degree, 3a: 112, 118, and 147; 3b: 113, 127, and 151 branches/1,000 C at 20, 40, and 60 °C, respectively). The dendritic polyethylene particle size obtained by 3a and 3b/DEAC can be controlled in the 1–20 nm range under low ethylene pressure (diameter, 3a: 18.31, 14.44, and 11.09; 3b: 12.29, 8.98 and 6.27 nm at 20, 40, and 60 °C, respectively) and could be expected to produce a nano-targeted drug carrier after modification with water-soluble oligo(ethylene glycol).     

Chinolizine und Indolizine,XIII. Acyl-2-hydroxy-4-chinolizinone

The reaction of 2-picolylketones (1 a, b) with reactive trichlorophenyl malonates (2 a–f) leads to 1-acyl-2-hydroxy-4-quinoliziones (3 a–i) which can be easily deacylated by boiling hydrochloric acid yielding 4-quinolizinones4 a–f. The 3-acetyl-2-hydroxy-4-quinolizinones6 and8 are obtained byKlosa-Ziegler acylation of4 a and7, respectively. The reaction of the acetyl compound3 a with acetic anhydride yields the 2-pyrone derivative9, whereas the propionyl derivative3 g yields the 4-pyrone10 under the same conditions. Nitration of3 e does not give the 1-nitro derivative12 but rather the 1,3-dinitro compound11.     

Synthesis and characterization of glycol-modified vanadium(V) oxoisopropoxide and their oximato derivatives: sol–gel transformations of [VO(OPr i )3], [VO{OCH2CH2OCH2CH2O}{OPr i }] and [VO{OCH2CH2OCH2CH2O}{ON=C(CH3)(C4H3S-2)}] to vanadia

Reaction of [VO(OPr ⁱ )₃] (1) with [O(CH₂CH₂OH)₂] in 1:1 molar ratio in anhydrous benzene yield glycol-modified precursor, [VO{OCH₂CH₂OCH₂CH₂O}{OPr ⁱ }] (2). Further reactions of (2) with internally functionalized oximes in anhydrous benzene yield heteroleptic complexes of the type [VO{OCH₂CH₂OCH₂CH₂O}{ON=C(R)(Ar)}] (3–8) {where R=CH₃, Ar=C₄H₃O-2 (3), C₄H₃S-2 (4), C₅H₄N-2 (5); and when R=H, Ar=C₄H₃O-2 (6), C₄H₃S-2 (7), C₅H₄N-2 (8)}. All these derivatives have been characterized by elemental analyses, molecular weight measurements and spectroscopic techniques. The crysoscopic molecular weight measurement as well as FAB mass study suggests dimeric nature of (2). However, FAB mass spectrum of (4), and the crysoscopic molecular weight measurements of (3), (4), (5) and (6) indicate the monomeric behavior of the oximato derivatives (3–8). Hexa-coordination around vanadium(V) has been proposed for both monomeric and dimeric derivatives. Sol–gel transformations of (1), (2) or (4) to vanadia [(a), (b) or (c), respectively] have been carried out at low sintering temperature (600 °C). The XRD patterns of (a), (b) or (c) indicate formation of a single orthorhombic phase in all the three cases. The SEM images suggest grain like [for (a) and (b)] and rod like [for (c)] morphology of the crystallites. IR, Raman spectra as well as EDX analyses indicate formation of pure vanadia. Absorption spectra of the vanadia (b) and (c) suggest energy band gaps of 2.53 and 2.65 eV, respectively.     

Excited state intramolecular hydrogen atom transfer of phenylethynyl-substituted 2′-hydroxychalcones

(E)-1-[2-Hydroxy-4-(phenylethynyl)phenyl]-3-[4-(phenylethynyl)phenyl]prop-2-en-1-one (1), (E)-1-[2-hydroxy-4-(phenylethynyl)phenyl]-3-phenylprop-2-en-1-one (2), and (E)-1-(2-hydroxyphenyl)-3-[4-(phenylethynyl)phenyl]prop-2-en-1-one (3), which belong to a new class of 2′-hydroxychalcones with phenylethynyl group(s) at the para position of the phenyl ring, were synthesized, and their photochemical properties were investigated. The lowest energy absorption band of 1 peaks at a longer wavelength (383 nm) with a much larger molar extinction coefficient (5.0 × 10⁴ M ^?1 cm^?1) than that of the parent 2′-hydroxychalcone (2′HC) (2.0 × 10⁴ M ^?1 cm^?1 at 318 nm). Upon photoexcitation, all three compounds underwent excited-state intramolecular hydrogen atom transfer (ESIHT) to produce an excited tautomer that emitted fluorescence with a large Stokes shift in the longer wavelength region at 600–700 nm. The quantum yield of the tautomer fluorescence of 1 was not high at 298 K (Φ _f = 9.1 × 10^?5), but was highest among 2′HC and its analogues. The Φ _f values of 1–3 increased 10–30 fold upon reducing the temperature from 298 to 77 K.     

Controlling the photochemical reactions of alkenes by light-path length effects of a microchannel reactor

Photoirradiation of Me₂CO–H₂O solution of pent-4-en-1-ol (1a) with a high-pressure mercury lamp in a test tube gave 8-hydroxyoctan-2-one (3a) in 66 % yield along with oxetane (4a) and the isomer (4a′) in 10 % yield. Irradiation of the running Me₂CO–H₂O solution of 1a in the flow system of a microchannel reactor (MCR) gave mainly 4a. The photoreaction of 1,1-diphenylethene (2a) with triethylamine gave a Markovnikov-type adduct (5a) and an anti-Markovnikov-type adduct (6a). The use of the MCR enhanced the production of 5a. These phenomena were explained by the light-path length effects of the MCR.