Electrogenerated chemiluminescence. XXIV. Electrochemistry and electrogenerated chemiluminescence of 9,10-dichloro-9,10-dihydro-9,10-diphenylanthracene

A study of the electrochemistry and electrogenerated chemiluminescence (e.c.l.) of 9,10-dichloro-9,10-dihydro-9,10-diphenylanthracene (DPACl₂) in acetonitrile solutions using rotating ring—disk electrode and stationary electrode techniques is described. The measured e.c.l. efficiency was about 0.1 to 0.8%, smaller than that observed for the corresponding DPA radical ion annihilation e.c.l. The emission is independent of applied external magnetic field, supporting the mechanism involving direct formation of emitting singlet. The e.c.l. emission and the electroreduction of DPACl₂ depend on the chloride concentration in the solution; the results suggest that this dependence is an electrode surface effect.     

Plant tissue-based chemiluminescence biosensor for ethanol.

A plant tissue-based chemiluminescence biosensor for ethanol based on using mushroom (Agaricus bisporus) tissue as the recognition element is proposed in this paper. The principle for ethanol sensing relies on the luminol-potassium hexacyanoferrate(III)-hydrogen peroxide transducer reaction, in which hydrogen peroxide is produced from the ethanol enzymatic catalytic oxidation by oxygen under the catalysis of alcohol oxidase in the tissue column. Under optimum conditions, the method allowed the measurement of ethanol in the range of 0.001 - 2 mmol/l with a detection limit (3 sigma) of 0.2 micromol/l. The relative standard deviation (RSD) was 4.14% (n = 11) for 0.05 mmol/l ethanol. The proposed method has been applied to the determination of ethanol in biological fluids and beverages with satisfactory results.     

Lab-on-paper-based devices using chemiluminescence and electrogenerated chemiluminescence detection

As an analytical support, paper, being low cost, highly abundant, of high porosity, disposable or biodegradable, and easy to use, store, transport, and print, has excellent chemical compatibility with many applications. Since the first microfluidic paper-based analytical device (μ-PAD or lab-on-paper) was proposed, the paper-based assay has never attracted as much attention as it does now. There has recently been rapidly increasing interest in using sensitive luminescence methods, for example chemiluminescence (CL) and electrogenerated chemiluminescence (ECL), as the detection strategy for lab-on-paper devices. Because of their intrinsic characteristics, CL and ECL provide outstanding performance while retaining the simplicity, low cost, multifunctionality, versatility, flexibility, and disposability of μ-PADs. The objective of this review is to cover the development of lab-on-paper-based devices using CL and ECL detection, including fabrication of paper devices, construction of sensing interfaces, signal amplification strategies, external instruments used, and applications. We believe that lab-on-paper devices with CL and ECL detection methods will meet the diverse requirements of point-of-care diagnosis.     

NaK chemiluminescence

The gas phase reaction between a mixture of K and Na and CBr₄ produces, under low-density conditions, emission from high-lying vibrational levels (υ′ > 9) of the B ¹ Π state of NaK.     

Flow-injection electrogenerated chemiluminescence determination of isoniazid using luminol.

Based on a new electrogenerated chemiluminescence (ECL) analytical idea, this paper explains a sensitive and selective flow-injection ECL method using luminol for the determination of isoniazid, based on the sensitizing effect of isoniazid for the weak ECL emission of electrochemically oxidized luminol. Under the optimum experimental conditions, the relative ECL intensity was linear with isoniazid concentration in the range of 4.0 x 10(-8) mol/L to 8.0 x 10(-6) mol/L and with a detecting limit of 2.8 x 10(-8) mol/L.     

Indigo chemiluminescence

Indigotin in basic solutions of polar aprotic solvents reacts with atmospheric oxygen yielding isatin. The reaction is accompanied by emission of light with a quantum yield equal to 2.6×10^?4 Einstein/mol. The spectral distribution of the indigotin chemiluminescence is that of the isatin fluorescence. Addition of equimolar amounts of isatin to the reaction mixture raises the chemiluminescence quantum yield to 5.3×10^?4 Einstein/mol. A mechanism involving the intermediate formation of indigotin dioxetan is proposed.     

Development of ultra-micro flow analysis with chemiluminescence detector.

We proposed to combine an ultra-micro flow analysis instrument using the fused-silica capillary and the CL detector. The CL reaction of luminol and hydrogen peroxide was adopted and the batch-type CL detection cell was used. Luminol and isoluminol-labeled protein as a model were sensitively and reproducibly detected with very small amounts of quantitative reagents. The analyses were repeated at least 100 times without any treatments such as washing capillaries or exchanging the hydrogen peroxide solution. The present system successfully promoted the miniaturization, simplification, and sensitization of the analytical system.     

N-bromosuccinimide-fluorescein based sensitive flow-injection chemiluminescence determination of phenformin.

A novel and highly sensitive method for the determination of phenformin over the range of 6 x 10(-9) - 1 x 10(-5) g ml(-1) in pharmaceutical formulations with flow-injection chemiluminescence (CL) detection is proposed. The method is based on the CL produced during the oxidation of N-bromosuccinimide (NBS) in an alkaline medium in the presence of fluorescein as an effective energy transfer agent. The use of cetyltrimethylammonium bromide (CTAB) as a sensitizer enhances the signal magnitude by about 100 times. The detection limit is 2 x 10(-9) g ml(-1) (3sigma) with a relative standard deviation of 2.3% (n = 11) at 1 x 10(-7) g ml(-1) phenformin. Ninety samples can be determined per hour. The method was evaluated by carrying out a recovery study and by the analysis of commercial formulations. The obtained results compared well with those by an official method, and demonstrated good accuracy and precision. The possible CL mechanism of the proposed system was also briefly analyzed.     

Permanganate-based chemiluminescence analysis of ferulic acid using flow injection.

A simple, sensitive and rapid flow-injection chemiluminescence method has been developed for the determination of ferulic acid based on the chemiluminescence reaction of ferulic acid with potassium permanganate in a nitric acid medium. A strong chemiluminescence signal was observed when ferulic acid was injected into an acidic potassium permanganate solution in a flow-cell. The present method allowed the determination of ferulic acid in the concentration range of 6.0 x 10(-6) to 2.0 x 10(-4) mol l(-1); the detection limit (3sigma) for ferulic acid was 9.6 x 10(-8) mol l(-1). The relative standard deviation was 1.0% for 11 replicate analyses of 2.0 x 10(-4) mol l(-1) ferulic acid. The proposed method was applied to the determination of ferulic acid in real samples with satisfactory results. Moreover, the reaction mechanism of the chemiluminescence system was primarily considered.     

Enhanced permanganate chemiluminescence

The significant enhancement of acidic potassium permanganate chemiluminescence by Mn(II) results from the concomitant presence of permanganate and Mn(III) in the reagent solution, which enables rapid production of the excited Mn(II) emitter with a wide range of analytes. Furthermore, the key Mn(III) co-reactant can be quickly generated by reducing permanganate with sodium thiosulfate, instead of the slow (~24 h) equilibration required when Mn(ii) is used. The emission from reactions with analytes such as tyrosine and fenoterol was over two orders of magnitude more intense than with the traditional permanganate reagent.     

Lasting chemiluminescence of 3-indoleglyoxylyl chloride and its enhancement.

The chemiluminescence (CL) intensities of various indole derivatives substituted with a glyoxylyl group at the 3-position and a hydroxyl group at the 5-position of the indole ring were compared upon the addition of H2O2 in alkaline media. The CL intensities of 3-indoleglyoxylyl chloride, 3-indoleglyoxylic acid, 5-hydroxyindole and 5-benzyloxyindole in CH3CN were 5.9-, 48-, 5.9- and 3.3-fold stronger than that of 3-methylindole. A lasting CL of 3-indoleglyoxylyl chloride was found. Under appropriate conditions, the CL emission reached a maximum within 10 min after the addition of H2O2 in the presence of NaOH, and the intensity was retained for 25 min. One of the final products via the CL reaction of 3-indoleglyoxylyl chloride was indole-3-carboxylic acid. 3-Indoleglyoxylyl chloride emitted light by decompositions via both dioxetane and dioxetanedione. An enhancement effect of beta-cyclodextrin and bovine serum albumin on the CL of 3-indoleglyoxylyl chloride was also found.     

Clinical applications of chemiluminescence

This article reviews the clinical applications of chemiluminescence in routine testing and surveys the diverse applications of chemiluminescence in clinical research. In routine clinical testing, chemiluminescent labels (acridinium ester, acridinium sulfonamide) and detection reactions for peroxidase and alkaline phosphatase enzyme labels (luminol and adamantyl 1,2-dioxetane-based reactions, respectively) are widely used in immunoassay and nucleic acid probe assays (e.g. hybridization protection assay, Hybrid Capture^® assay). In clinical research the sensitivity, dynamic range and diversity of chemiluminescent assays has led to a vast range of applications, notably in protein and nucleic acid blotting, microarray-based assays, monitoring reactive oxygen species, and as detection reactions for substances separated by HPLC, capillary electrophoresis (CE), and flow-injection analysis.