Solvent‐free and nonisocyanate melt transurethane reaction for aliphatic polyurethanes and mechanistic aspects

A novel melt transurethane polycondensation route for polyurethanes under solvent‐free and nonisocyanate condition was developed for soluble and thermally stable aliphatic or aromatic polyurethanes. The new transurethane process was investigated for A + B, A‐A + B, and A‐A + B‐B (A‐urethane and B‐hydroxyl) ‐type condensation reactions, and also monomers bearing primary and secondary urethane or hydroxyl functionalities. The transurethane process was confirmed by ¹H and ¹³C NMR, and molecular weight of the polymers were obtained as M_n = 10–15 × 10³ and M_w = 15–45 × 10³ g/mol. The mechanistic aspects of the melt transurethane process and role of the catalyst were investigated using model reactions, ¹H NMR, and MALDI‐TOF‐MS. The model reactions indicated the occurrence of 97% reaction in the presence of catalyst, whereas its absence gave only less than 2% of the product. The polymer samples were subjected for end‐group analysis using MALDI‐TOF‐MS, which confirms the Ti‐catalyst mediated nonisocyanate pathway in the melt transurethane process. Almost all the polyurethanes were stable up to 280 °C, and the T_g of the polyurethanes can be easily fine‐tuned from ?30 to 120 °C by using appropriate diols in the melt transurethane process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2445–2458, 2008     

Sugar‐based hydrophilic polyurethanes and polyureas

Novel linear homogeneous polyurethanes and polyureas with enhanced hydrophilic character have been successfully prepared from sugar‐based monomers having their hydroxyl groups free or partially protected. By the reaction of primary hydroxyl groups of xylitol with dimethyl hexamethylene dicarbamate (HMDC) or di‐tert‐butyl‐4,4′‐diphenyl methyl dicarbamate (MDC), two new linear semicrystalline polyurethanes [PU(X‐HMDC) and PU(X‐MDC)] have been prepared. Likewise, by the reaction of xylitol with the analogous diisocyanates hexamethylene diisocyanate (HMDI) or 4,4′‐methylenebis(phenyl isocyanate) (MDI), similar polyurethanes [PU(X‐HMDI) and PU(X‐MDI)] were obtained. However, these latter polyurethanes present some degree of crosslinking because of the higher reactivity of the diisocyanate comonomers. Linear hydrophilic polyureas having free hydroxyl groups joined to the main chain have also been prepared by the reaction of the same diisocyanates (HMDI and MDI) with 1,6‐diamino‐1,6‐dideoxy‐D ‐mannitol and 1,6‐diamino‐1,6‐dideoxy‐3:4‐O‐isopropylidene‐D ‐mannitol. As far as we are aware, this kind of polyhydroxylated polyurea has not been previously described in the literature. The new polymers were characterized by standard methods (elemental analyses, gel permeation chromatography, IR, and NMR). The polyurethanes were hydrolytically degradable under physiological conditions, in contrast with less‐hydrophilic linear polyurethanes previously described. The thermal properties of the novel polymers were investigated by thermogravimetric analysis and differential scanning calorimetry. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Optically-active polyurethanes containing coumarin dimer component: Synthesis,characterization, and chiral recognition ability

Optically-active polyurethanes ( 2a-2c ) were prepared by polyaddition reaction of diamide ( 1a, 1b ) and diester ( 1c ) derivatives of chiral coumarin dimer with 4,4′-diphenylmethane diisocyanate (MDI) in chloroform and methyl ethyl ketone, respectively. The inherent viscosity of the polyurethanes are between 0.13 and 0.21 dL/g in N,N-dimethylacetamide (DMAc) at 30°C. Treated silica gels were absorbed with ca. 25 wt % of the polyurethanes, and packed as chiral stationary phases for direct optical resolution of 16 racemates with aromatic groups by high-performance liquid chromatography (HPLC). Polyurethanes 2a and 2b , obtained from diamide derivatives, show efficient resolution ability to some of the racemates (α = 1.06-1.79), especially the atropic ( R5 ) and trans ( R6-R9 ) isomers. The recognition ability of the polyurethanes can be attributed to the simultaneous aromatic stacking and hydrogen-bonding interactions with racemates. © 1992 John Wiley & Sons, Inc.     

Linear polyurethanes derived from alditols and diisocyanates

A set of linear [m,n]‐type polyurethanes was synthesized by polycondensation in solution from hexamethylene diisocyanate and 4,4′‐methylene‐bis(phenyl isocyanate) with alditols. Threitol, arabinitol, and xylitol bearing the secondary hydroxy groups blocked as methyl ethers were used. Either regioregular or nonregioregular polymers (depending on the configuration of the alditol) were obtained in high yields and with number‐average molecular weights within the 20,000–30,000 range. All these polyurethanes were amorphous with T_g being highly dependent on the aliphatic or aromatic nature of the diisocyanate used, but scarcely depending on the chemical structure of the alditol moiety. They were found to be stable up to near 300 °C, decomposing at higher temperatures through a complex three‐stage mechanism. Polyurethanes obtained from threitol did not show significant enhancement of hydrolytic degradability as compared with polyurethanes obtained from 1,4‐butanediol. Conversely, polyurethane prepared from xylitol and hexamethylendiisocyanate was found to be almost fully hydrolyzed in 1 month when incubated in water either at 80 °C and pH 7.4 or at 37 °C and pH 10. It was concluded that the alditol size seems to be of prime importance in determining the hydrodegradability of these sugar containing polyurethanes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4109–4117, 2007     

Organic–inorganic polyurethanes with double decker silsesquioxanes in the main chains: Morphologies,surface hydrophobicity,and shape memory properties

In this contribution, we reported an investigation of the morphologies, surface hydrophobicity, and shape memory properties of the organic–inorganic polyurethanes with double decker silsesquioxane (DDSQ) in the main chains. It was found that the organic–inorganic polyurethanes were microphase‐separated and that the POSS cages in the main chains were self‐organized into the spherical microdomains with the size of 10–50 nm in diameter. The introduction of POSS cages into the main chains resulted in the enhancement of glass transition temperatures (T_g's). In the meantime, the surface dewettability of the materials was significantly enhanced. X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) indicates the improvement of the surface hydrophobicity resulted from the enrichment of POSS at the surfaces of the polyurethanes. The mechanical analyses, such as dynamic mechanical analysis (DMA) and creep‐recovery analysis (CRA), indicate that the POSS microdomains dispersed in the polyurethanes behaved as the physical crosslinking sites and promoted the formation of the crosslinked networks. Owing to the introduction of DDSQ into the main chains, the organic–inorganic polyurethanes significantly displayed shape memory properties, in marked contrast to the unmodified and linear polyurethane. The shape memory behavior has been addressed on the formation of the strong physically crosslinked networks in the organic–inorganic polyurethanes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 893–906     

Effect of the poly(oxytetramethylene)diol spacer length on some properties of liquid crystalline polyurethanes

Previous studies on liquid crystalline polyurethanes prepared from 4,4′-bis(2-hydroxyethoxy)biphenyl (BHBP) and 2,4-tolylene diisocyanate (TDI) were continued. In this article, a series of polyurethanes, which differ in the flexible spacer length and BHBP content is described. Poly(oxytetramethylene)diols of different molecular weights (PTMO, M _n = 250, 650, 1000, 2000) were used as flexible spacers. The polyurethanes were investigated by DSC, polarizing microscopy, x-ray diffractometry, and IR spectroscopy. The molecular weight distribution was determined by GPC. The morphology of the polyurethanes was investigated by the SALS method. Partial replacement of BHBP by 25–75 mol % PTMO and the flexible spacer length influence the liquid crystalline properties, the phase transition temperatures, and the range of mesophase occurrence. © 1993 John Wiley & Sons, Inc.     

Synthesis and structural characterizations of [chromophore]+‐saponite/polyurethane nanocomposites

In this study, three chromophores—p‐nitroaniline, 4‐(4‐nitrophenylazo)aniline, and 4‐[(E)‐2‐{4‐[(E)‐2‐(4‐nitrophenyl)‐1‐diazenyl]phenyl}‐1‐diazenyl]aniline—were intercalated into layered aluminosilicate saponite and then dispersed into the polyurethanes matrix. The intercalated chromophore/saponite complexes were examined by inductively coupled plasma emission and element analysis technologies. The molecular orbital package computation simulation and X‐ray diffraction (XRD) analysis showed that possible configurations of chromophore ions on the gallery surfaces of saponite suggest that the chromophore molecules lie parallel to the basal planes of silicate as an inclined paraffin structure or as pseudo‐multilayers. The XRD and transmission electron microscopy analysis indicated that the delamination of organoclay in the polyurethanes matrix exhibited nanolayers, exfoliated structure, or both. In particular, even at high doping levels up to 15 wt % of organoclay, the [chromophore]⁺‐saponite/polyurethanes film did not display a macroscopic aggregation of layered silicates and showed high transparency. The thermal stability of chromophore was significantly enhanced as intercalated into the layered aluminosilicate saponite, and the glass‐transition temperature of [chromophore]⁺‐saponite/polyurethanes nanocomposites proportionally increased with increased clay content. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1690–1703, 2002     

Linear polyurethanes made from threitol: Acetalized and hydroxylated polymers

A set of novel linear polyurethanes was synthesized by reaction in solution of 1,6‐hexamethylene diisocyanate (HDI) or 4,4′‐methylene‐bis(phenyl diisocyanate) with 2,3‐acetalized threitols, specifically, 2,3‐O‐methylidene‐L ‐threitol and 2,3‐O‐isopropylidene‐D ‐threitol. The polyurethanes containing acetalized threitols had weight‐average molecular weights between 40,000 and 65,000 Da. Most of them were amorphous and they displayed T_g higher than their unsubstituted analogs. Deprotection of acetalized polyurethanes by treatment with acid allowed preparing semicrystalline polyurethanes bearing two free hydroxyl groups in the repeating unit. The crystalline structure and crystallizability of the hydroxylated polyurethane made from HDI were investigated taken as reference the polyurethane made from 1,4‐butanediol and HDI. The hydrolytic degradability of threitol derived polyurethanes was comparatively evaluated under a variety of conditions. Highest degradation rates were obtained upon incubation at pH 10 at temperatures above T_g, the aliphatic hydroxylated polyurethane being the fastest degrading compound. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7996–8012, 2008     

Synthesis and properties of bio‐based polyurethanes bearing hydroxy groups derived from alditols

Four kinds of bio‐based polyurethanes bearing hydroxy groups in the pendants were synthesized by the polyaddition of D ‐mannitol‐ and D,L ‐erythritol‐derived diols (1,2:5,6‐di‐O‐isopropylidene‐D ‐mannitol and 1,2‐O‐isopropylidene‐D,L ‐erythritol) with hexamethylene diisocyanate and methyl (S)‐2,6‐diisocyanatohexanoate and the subsequent deprotection of the isopropylidene groups. They were hydrolyzed much more quickly than the corresponding protected polyurethanes at 50 °C and pH 7.0, although their hydrolytic degradation rate was lower than that of polyurethanes with saccharic and glucuronic lactone groups, which had been reported in our previous articles. The introduction of D ‐mannitol units to the polyether‐polyurethanes containing poly(oxytetramethylene) glycol units also enhanced their hydrolyzibility. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel elastomeric polyurethanes with pendant epoxy groups as highly reactive auxiliary groups for further derivatizations

The introduction of pendant, reactive groups into polyurethane macromolecules is a challenging problem. A variant of the nondegradative modification of polyurethanes with epoxy groups attached to the urethane sites is proposed. Two types of commercial elastomeric segmented polyurethanes, represented by a poly(ether urethane) and a poly(urethane urea), were functionalized by base‐induced N‐glycidylation of the urethane hard segments with an excess of epibromohydrin in dimethylacetamide solutions at low temperatures. This resulted in the modification of polymers with 0.30–0.44 mmol/g of pendant epoxy groups. Lithium or potassium tert‐butoxides were used as bases to initiate the reaction. A nonpolymeric urethane model (ethyl N‐p‐tolylcarbamoate) was used to verify the course of glycidylation. One of the polymers was subjected to epoxy ring opening with 1‐propanethiol, demonstrating the versatility of pendant glycidyl groups as auxiliary groups for further bulk modifications of polyurethanes. These functionalized polyurethanes are useful for the further covalent attachment of suitable moieties (stabilizing or biocompatibility‐enhancing agents). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4378–4385, 2002     

Rigid triol and diol with adamantane‐like core derived from naturally occurring myo‐inositol and their polyaddition with diisocyanates

Two orthoester derivatives 1 and 2 that are easily accessible from naturally occurring myo‐inositol were exploited as new triol‐ and diol‐type monomers bearing a rigid adamantane‐like structure to polyaddition with diisocyanates that gave the corresponding networked and linear polyurethanes. DSC analysis of the networked polyurethanes revealed their high glass transition temperatures ranging from 155 to 248 °C, suggesting the contribution of the rigidity of the adamantane‐like structure introduced at the nodes of the networked polyurethanes 6. Besides, the polyaddition of 2 with diisocyanates gave the corresponding linear polyurethanes 4, of which glass transition temperatures were high, ranging from 105 to 177 °C, presumably by virtue of the rigidity of the adamantane‐like structure introduced into the main chains. T_gs of the networked polyurethanes 6 were higher than those of the linear polyurethanes 4. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3498–3505     

Synthesis and characterization of poly(urethane-sulfone)s

Eight poly(urethane-sulfone)s were synthesized from two sulfone-containing diols, 1,3-bis(3-hydroxypropylsulfonyl)propane (Diol-333) and 1,4-bis(3-hydroxypropylsulfonyl)butane (Diol-343), and three diisocyanates, 1,6-hexamethylene diisocyanate (HMDI), 4,4′-diphenylmethane diisocyanate (MDI), and tolylene diisocyanate (TDI, 2,4- 80%; 2,6-20%). As a comparison, eight polyurethanes were also synthesized from two alkanediols, 1,9-nonanediol and 1,10-decanediol, and three diisocyanates. Diol-333 and Diol-343 were prepared by the addition of 1,3-propanedithiol or 1,4-butanedithiol to allyl alcohol and subsequent oxidation of the resulting sulfide-containing diols. The homopoly(urethanesulfone)s from HMDI and MDI are semicrystalline, and are soluble in m-cresol and hot DMF, DMAC, and DMSO. The copoly(urethane-sulfone)s from a 1/1 molar ratio mixture of Diol-333 and Diol-343 with HMDI or MDI have lower crystallinity and better solubility than the corresponding homopoly(urethane-sulfone)s. The poly(urethane-sulfone)s from TDI are amorphous, and are readily soluble in m-cresol, DMF, DMAC, and DMSO at room temperature. Differential scanning calorimetry data showed that poly(urethane-sulfone)s have higher glass transition temperatures and melting points than the corresponding polyurethanes without sulfone groups. The rise in glass transition temperature is 20–25°C while the rise in melting temperature is 46–71°C. © 1994 John Wiley & Sons, Inc.     

Synthesis and reversible photocleavage of novel polyurethanes containing coumarin dimer components

Six polyurethanes containing coumarin dimer components in the main chain have been prepared by polyaddition of diisocyanates with anti head-to-head 7-hydroxycoumarin dimer or anti head-to-tail 7-hydroxy-4-methylcoumarin dimer. 7-Acetoxycoumarin and 7-acetoxy-4-methylcoumarin were first prepared and then photodimerized under 350 nm UV light to give anti head-to-head 7-acetoxycoumarin dimer and anti head-to-tail 7-acetoxy-4-methylcoumarin dimer, respectively. After hydrolyzing under acidic conditions to 7-hydroxycoumarin dimer and anti head-to-head 7-hydroxycoumarin dimer, they were polymerized with aliphatic and aromatic diisocyanates in N,N-dimethylacetamide to give the polyurethanes. Addition of dibutyltin dilaurate (T-12) as catalyst increases the polymer yield with the viscosity remaining almost unchanged. It was also found that lithium chloride enhances both the yield and viscosity of the polyurethanes by increasing their solubility possibly through complexation. The polyurethanes are symmetrically photocleaved at cyclobutane rings under 254 nm UV light to dicoumarins. Reversible photodimerization of the photocleaved compounds have also been investigated under 300 and 350 nm UV light. The polyurethanes from aromatic diisocyanates or with 4-methyl substituent exhibit greater reactivity in the photocleavage reaction. © 1997 John Wiley & Sons, Inc.     

Synthesis and properties of novel polyurethanes containing 3,4‐dioxybenzylidenecyanoacetate group as a nonlinear optical chromophore

Methyl 3,4‐di‐(2′‐hydroxyethoxy)benzylidenecyanoacetate ( 3 ) was prepared by hydrolysis of methyl 3,4‐di‐(2′‐vinyloxyethoxy)benzylidenecyanoacetate ( 2 ). Diol 3 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate, and 1,6‐hexamethylenediisocyanate to yield polyurethanes 4 – 6 containing the nonlinear optical chromophore 3,4‐dioxybenzylidenecyanoacetate. The resulting polyurethanes 4 – 6 were soluble in common organic solvents such as acetone and dimethylformamide. Polymers 4 – 6 indicated thermal stability up to 300 °C in thermogravimetric thermograms with glass‐transition temperature values obtained from differential scanning calorimetric thermograms in the range of 78–102 °C. The second‐harmonic generation coefficients (d₃₃) of the poled polymer films were around 6.9 × 10^?9 esu. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1742–1748, 2002     

Synthesis and properties of liquid crystalline polyurethanes

Liquid crystalline polyurethanes were prepared from 4,4′-bis(2-hydroxyethoxy)biphenyl (BHBP) and 2,4-tolylene diisocyanate (TDI). The effect of partial replacement of BHBP by 25–75 mol % poly(oxytetramethylene) diol (PTMO, M _n = 250) on the liquid crystalline properties was studied. The BHBP/TDI/PTMO polyurethanes were obtained by one- and two-step polyaddition. The polyurethanes were investigated by DSC, polarizing microscopy, x-ray, and IR spectroscopy. The molecular weight distribution was determined by GPC. The morphology of the polymers was investigated by the SALS method. Thermogravimetric investigations of the polyurethanes were also performed. All polyurethanes containing BHBP units have liquid crystalline properties. Partial replacement of BHBP by PTMO-250 considerably changes the phase transition temperatures and the range of mesophase occurrence. More homogeneous polyurethanes were obtained, if the two-step polyaddition method was applied. The polyaddition method affects the phase transition temperatures. © 1993 John Wiley & Sons, Inc.     

Clickable polyurethanes based on s‐triazine ring containing aromatic diisocyanate bearing pendent alkyne group: Synthesis and postmodification

A new s‐triazine ring containing aromatic diisocyanate bearing a pendent alkyne group, namely, 2,4‐bis(4‐isocyanatophenoxy)?6‐(prop‐2‐yn‐1‐yloxy)?1,3,5‐triazine was synthesized and reacted with various diols viz., 1,10‐decanediol, tetraethylene glycol and polyethylene glycols in the presence of dibutyltin dilaurate as the catalyst to obtain a series of linear polyurethanes. The selected polyurethanes possessing pendent alkyne groups were postmodified with chemically diverse azides viz., 1‐(azidomethyl)benzene, 1‐(azidomethyl)pyrene, and methoxy end‐caped poly(ethylene glycol) azide via copper‐catalysed azide‐alkyne Huisgen 1,3‐dipolar cycloaddition. FTIR and ¹H NMR spectra indicated quantitative click reaction. UV–vis and fluorescence spectroscopic analysis confirmed complete incorporation of pyrenyl groups indicating the formation of fluorescence active polyurethane by postmodification with 1‐(azidomethyl)pyrene. TG analysis of polyurethanes indicated two stage weight loss and their thermal stability, as judged by T ₁₀ values, was governed by weight percent of urethane linkages. The water contact angle measurements revealed improved wettability with increased content of PEG either in the backbone of polyurethanes or as grafted chains. DLS and TEM studies confirmed that certain polyurethanes possessing PEG segments displayed self‐assembly in aqueous solution, which was further supported by pyrene encapsulation studies using UV–vis spectroscopy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1008–1020     

Segmented polyurethanes with 4,4′-bis-(6-hydroxyhexoxy) biphenyl as chain extender. I. Synthesis and characterization of 2,4-tdi-polyurethanes

Polyurethanes composed of 2,4-toluene diisocyanate (TDI), poly (butylene adipate) diols (PBA) of different molecular weights, and 4,4′-bis-(6-hydroxyhexoxy) biphenyl (BHHBP) were prepared by a two-step solution polymerization process. The polyurethanes were char-acterized by elemental analysis, NMR, and SEC. The thermal properties were investigated by DSC, DMA, and optical polarizing microscopy. Dependent on the molecular weight of the PBA, a shift in the glass transition temperature T_g of the polyurethanes has been observed by DSC and DMA. Polyurethanes based on poly (butylene adipate)s of M_n ～ 2000 exhibited a T_g nearly independent on the hard-segment content up to 50% LC hard segments, indicating the existence of mainly phase separated soft and hard segments. By shortening the PBA chain length up to 1,000 and further to 600, the T_g of the polyester soft-segment phase increases with growing hard-segment content, a consequence of enhanced interaction between the hard and soft segments. This tendency is observed to the greatest extent at polyurethanes with the shortest, polyester diol and can be interpreted as a partial miscibility or compatibility of hard and soft segments. Although in polyurethanes with PBA 2000 the mesophase can be proven at a hard-segment content of ～ 40%, its appearance in polyure-thances prepared with PBA 1000 or PBA 600 requires a hard-segment content > 60%. © 1995 John Wiley & Sons, Inc.     

Polyurethanes containing sulfur. I. New thermoplastic polyurethanes with benzophenone unit in their structure

New thermoplastic nonsegmented thiopolyurethanes were obtained from the low-melting aliphatic–aromatic thiodiols 4,4′-bis(2-hydroxyethylthiomethyl)benzophenone (BHEB), 4,4′-bis(3-hydroxypropylthiomethyl)benzophenone (BHPB), and 4,4′-bis(6-hydroxyhexylthiomethyl)benzenophenone(BHHB) as well as hexamethylene diisocyanate (HDI), both by melt and solution polymerization with dibutyltin dilaurate as the catalyst. The effect of various solvents on molecular-weight values was examined. The polymers with the highest reduced viscosities (0.63–0.88 dL/g) were obtained when the polymerization was carried out in a solution of tetrachloroethane, N,N-dimethylacetamide, and N,N-dimethylacetamide or N,N-dimethylformamide for BHEB-, BHPB-, and BHHB-derived polyurethanes, respectively. These polymers with a partially crystalline structure showed glass-transition temperatures (T_g) in the range of −1 to 39 °C, melting temperatures (T_m) in the range of 107 to 124 °C, and thermal stabilities up to 230 to 240 °C. The BHEB-derived polyurethane is a low-elasticity material with high tensile strength (ca. 50 MPa), whereas the BHPB- and BHHB-derived polyurethanes are more elastic, showing yield stress at approximately 16 MPa. We also obtained segmented polyurethanes by using BHHB, HDI, and 20 to 80 mol % poly(oxytetramethylene) glycol (PTMG) of M̄_n = 1000 as the soft segment. These are high-molecular thermoplastic elastomers that show a partially crystalline structure. Thermal properties were investigated by thermogravimetric analysis and differential scanning calorimetry. The increase in PTMG content decreases the definite T_g and increases the solubility of the polymers. These segmented polyurethanes exhibit the definite T_g (−67 to −62 °C) nearly independent of the hard-segment content up to approximately 50 wt %, indicating the existence of mainly phase-separated soft and hard segments. Shore A/D hardness and tensile properties were also determined. As the PTMG content increases, the hardness, modulus of elasticity, and tensile strength decrease, whereas elongation at break increases. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4140–4150, 1999     

SYNTHESIS OF POLYURETHANES CONTAINING DIOXYBENZYLIDENECYANOACETATE AS AN NLO-CHROMOPHORE FOR ELECTRO-OPTIC APPLICATIONS

Methyl 2,4-di-(2'-hydroxyethoxy)benzylidenecyanoacetate (3) was prepared by hydrolysis of methyl 2,4-di-(2'-vinyloxyethoxy)benzylidenecyanoacetate (2). Diol 3 was condensed with 2,4-toluenediisocyanate and 3,3'-dimethoxy-4,4'-biphenylenediisocynate to yield polyurethanes 4 and 5 containing the NLO-chromophore 2,4-dioxybenzylidenecyanoacetate. The resulting polyurethanes were soluble in common organic solvents such as acetone and DMF. T _g values of the polymers obtained from DSC thermograms were in the range of 101–114°C and electro-optic coefficient (r ₃₃ ) of the poled polymer films was in the range of 12–15 pm/V at 633 nm. Polymers 4 and 5 showed a thermal stability up to 300°C in TGA thermograms, which is acceptable for NLO device applications.     

Functional polymers. IX. Polycarbonates and alternating copolycarbonates of bithionol

A number of polycarbonates, alternating copolycarbonates, polyurethanes, and terpolymers with carbonate and/or urethane linkages utilizing bithionol [2,2'-thiobis(4,6-dichlorophenol)] as the bisphenol component of the polymers have been synthesized. Bithionol has been demonstrated to give a polycarbonate with an inherent viscosity of about 0.5 dl/g. The polycarbonate is amorphous and has a glass transition temperature T_g of about 105°C. Alternating copolycarbonates and polyurethanes involving bithionol are most conveniently prepared from the bischloroformate of bithionol. An alternating copolycarbonate of bithionol and poly(ethylene glycol) of molecular weight 4000 has an inherent viscosity of more than 1.2 dl/g, is water soluble, and has characteristics similar to those of low-density polyethylene. Alternating copolymers of bithionol and other hindered bisphenols have been synthesized and can be visualized as having an antibacterial agent and an antioxidant in the same polymer chain. These polymers have the potential to act as very useful materials for the controlled release of drugs while only forming carbon dioxide as the additional small molecule fragment on hydrolysis.