Electroinitiated Polymerization of Acrolein by Direct and Indirect Electron Transfer Via Controlled Potential Electrolysis

Electroinitiated polymerization of acrolein has been achieved by controlled potential electrolysis at the reduction peak potential of the monomer for direct electron transfer. Kinetics and type of mechanism of the polymerization have been investigated. the structure of the polymer has also been examined by IR spectroscopy. in a separate experiment, a small amount of CCI₄ was added to a polymerization system. Since the reduction peak potential of CCI₄ appears at a more anodic region than that of acrolein on mercurized platinum, initiation proceeds via the electrolytic product of CCI₄. the direct and indirect initiation mechanisms are compared. It is found that electroinitiated polymerization of acrolein carried out by direct electron transfer from cathode to monomer (in the absence of CCI₄) proceeds simultaneously via radical and anionic mechanism.     

Polymerization of Bis(Pyridine)bis-(2,4,6-tribromophenoxo)copper(II) Complex (Py2Cu(TBrP)2) by Electrooxidation and Structural Characterization by 1H-NMR, 13C-NMR,and FTIR Spectroscopies

Abstract

Electroinitiated polymerization of bis(2,4,6-tribromophenoxo)- bis(pyridine)copper(II) complex was achieved in dimethylformamide-tetrabutylammonium tetrafluoroborate solvent-electrolyte couple under air or nitrogen at room temperature by constant potential electrolysis. Polymerization conditions were based on the peak potentials measured by cyclic voltammetry. The structural analyses of the polymers were done by ¹H-NMR, ¹³C-NMR, and FTIR spectral analyses along with molecular weight measurements by cryoscopy. The poly(dibromo phenylene oxide)s obtained only at oxidation potentials in either atmosphere were found to be highly linear, indicating mainly 1,4-catenation was taking place.     

Electroinitiated Polymerization of N-Vinylcarbazole by Direct Electron Transfer

Electroinitiated polymerization of N-vinylcarbazole has been accomplished by constant potential electrolysis. It was found that direct electron transfer from the monomer to the anode initiates the polymerization even at a potential as low as +0.95 V versus Ag^?/ Ag⁺. Dichloromethane was used as the solvent, and the electrolyte was tetrabutylammonium fluoroborate. Conversions as high as 86% were reached even when a microelectrode was used. Effects of electrode area, temperature, and electrode potential on polymerization were studied. Percent conversion was followed by cyclic voltammetry.     

Electroninitiated polymerization of bis(trichlorophenoxo)-tetramethylethylene diamine copper(II)

Electroninitiated polymerization of bis(trichlorophenoxo)-N,N,N′,N′-tetramethylethylene diamine copper(II) was achieved in acetonitrile at various peak potentials of the monomer. A constant potential approach was selected in polymerization reactions. Electrolyses were carried out under air, nitrogen, and oxygen atmospheres. Structural analyses of the polymers were done by ¹H-NMR and ¹³C-NMR FT–IR spectroscopy. Molecular weights of the polymers were determined by vapor pressure (isopiestic) method.     

Carbazole-substituted dehydroalanine main chain polymers. Synthesis and characterization of poly[methyl 2-(9-carbazolyl) acetylaminopropenoate] and poly[2-(9-carbazolyl) acetylaminopropenoic acid]

The preparation and radical-initiated polymerization of a carbazole-substituted N-acylated dehydroalanine, namely, 2-(9-carbazolyl)acetylaminopropenoic acid ( 7 ) and its methyl ester ( 6 ) is reported. The monomers 6 and 7 were prepared by dehydrochlorination of N-acylated β-chloroalanine derivatives. The monomer model compounds for the two polymers, namely, 2-(9-carbazolyl)acetylamino-2-methylpropanoic acid ( 11 ) and its methyl ester ( 10 ), were also prepared. The polymers and their monomer model compounds were characterized by elemental analysis, IR and ¹H-NMR spectra. The polymers 12 and 13 of different molecular weights could be obtained by changing the monomer-to-initiator ratios used in polymerization experiments.     

Electroinitiated polymerization of arylvinyl monomers

The electroinitiated polymerizations of styrene, 2-vinylnaphthalene, and 9-vinylanthracene were compared in sulfolane and acetone solvents in the presence of ZnCl₂. The relative orders of polymerization rates and polymerization efficiencies, in both solvents, were 9-vinylanthracene > 2-vinylnaphthalene > styrene, with faster rates and higher efficiencies occurring in sulfolane. Data obtained from viscosity and gel permeation chromatography (GPC) studies indicate that the molecular weights of the polymers produced in these systems are extremely low, <5000. Chemical composition and infrared (IR) spectral data suggest that abnormal transfer reactions (possibly from solvent) may be occurring in the electroinitiated 9-vinylanthracene polymerizations. The polymerization mechanism appears to be cationic in these monomer–solvent systems with ZnCl₂.     

Polymerization of ε-caprolactone initiated by stable salts. Initiation mechanism

The mechanism of initiation of ε-caprolactone polymerization by stable salts has been investigated. Gel permeation chromatography and ¹H-NMR spectroscopy were used for determining the compositions of the reaction mixtures and of the polymers. It was established that the initiation proceeds by addition of the initiator to the monomer.     

Syntheses of poly[N-(1-pyrenyl)acetyl ethylenimine] [pyrene-substituted linear poly(ethylenimine)] and poly[methyl 2-(1-pyrenyl)acetamidopropenoate] [pyrene-substituted poly(dehydroalanine methyl ester)]

The syntheses of two new pyrene-containing monomers—2-(1-pyrenyl)methyl-2-oxazoline ( 6 ) and methyl 2-(1-pyrenyl)acetamidopropenoate ( 12 )—and their polymerization are described. Cationic isomerization polymerization of 6 with ethylene glycol ditosylate initiator gave poly[N-(1-pyrenyl)acetyl ethylenimine] ( 7 ) and free-radical polymerization of 12 with AIBN initiator gave poly[methyl 2-(1-pyrenyl)acetamidopropenoate] ( 15 ). The monomer model compounds of the two polymers, namely, N,N-diethyl(1-pyrenyl)acetamide ( 9 ) and methyl 2-methyl-2-(1-pyrenyl)acetamidopropanoate ( 14 ), were also synthesized. The polymers were characterized by elemental analysis, IR spectroscopy, and a comparison of their ¹H-NMR spectra with those of the respective monomer model compounds.     

Use of samarium (III) acetate as initiator in ring-opening polymerization of trimethylene carbonate

Abstract

In this work was evaluated the activity of samarium acetate (III) (Sm(OAc)₃) as a possible initiator in the polymerization by ring opening of trimethylene carbonate (TMC). All polymerizations were carried out under solvent-free melt conditions in ampoules-like flasks, equipped with a magnetic stirrer. The effects of different parameters of reaction, such as molar ratio monomer to initiator, temperature and reaction time, on typical variables of polymers, e.g., conversion of TMC to poly(trimethylene carbonate) (PTMC), dispersity and molar mass, were analyzed. The molar ratio of monomer to initiator was varied between 0 and 1000?mol/mol and the temperature among 70 and 150?°C. Nuclear Magnetic Resonance (¹H-NMR and HMBC) and Size Exclusion Chromatography (SEC) were used to characterize the polymers. The results indicate that the Sm(OAc)₃ induces the polymerization of TMC to high conversion with number-average molecular weights of 3.11?×?10³ to 38.40?×?10³?Da. Based on the ¹H-NMR end-group analysis of low-molecular-weight PTMC, it was proposed a coordination–insertion mechanism for the polymerization, with a breakdown of the acyl-oxygen bond of the TMC. In according to the kinetic study carried out, the polymerization rate is first-order with respect to monomer concentration with apparent rate constants of k_ap?=?7.02?×?10^?4?mol?×?L^?1?×?h^?1.     

SYNTHESIS AND CHARACTERIZATION OF NOVEL REACTIVE POLYORGANOSILOXANE CONTAINING NITRO GROUPS*

 A novel reactive polyorganosiloxane containing nitro groups was first prepared by acid-catalyzed equilibration polymerization. The monomer, 3-(4-nitrophenoxy)propylmethyldichlorosilane (NPPMS), was synthesized by hydrosilylation reaction with dicyclopentadienylplatinum(II) chloride (Cp₂PtC1₂) catalyst in high yield. The synthesized polynitroorganosiloxane, which has potential application as a precursor for synthesizing advanced functional polymers, was characterized by FTIR, ¹H-NMR, ¹³C-NMR, ²⁹Si-NMR, vapor pressure osmometry (VPO) and gel permeation chromatography (GPC).     

Synthesis and polymerization of multiallyl monomer in matrix of poly(methacryloyl chloride)

By reacting poly(methacryloyl chloride) (PMKC) with allyl amine, a multiallyl monomer in PMKC matrix has been obtained. Free-radical polymerization of multiallyl monomer in diluted solutions at a concentration of 12 g/L multiallyl monomer occurs partly along ordered allyl units in the matrix and results in ladder-type branched polymers. The polymers obtained are soluble in alcohols, DMF, DMSO and have unreacted allyl double bonds. The structures of multiallyl monomer and homopolymer have been found on the basis of elemental analysis, IR and ¹H-NMR spectra and an examination of the products of hydrolysis. The effect of the reaction of degradative chain transfer on the structure of the polymer obtained has been discussed.     

Polymeric Nitrofuran Derivatives. I. Radical-Initiated Homo- and Copolymerization of 5-Nitrofurfuryl Methacrylate

The radical homopolymerization of 5-nitrofurfuryl methacrylate (NFMA) and the copolymerization of NFMA with methyl methacrylate and various vinyl monomers, respectively, have been studied in dimethylformamide at 65°C. NFMA and poly(NFMA) have been characterized by ¹H-NMR, IR, and UV spectroscopy. The influence of polymerization conditions on monomer conversion and on the molecular weight of the polymers obtained has been investigated. The thermal behavior of the polymers obtained has been studied by TGA and DSC analysis.     

Polymers and Copolymers of Vinyl Monomers with Blocked Isocyanate Groups: Synthesis and Characterization

Abstract

The polymerization of vinyl monomers containing blocked isocya-nate groups is reported. The blocking agents for the isocyanate groups of 2-isocyanato methacrylate were phenol, propanone oxime, benzophe-none oxime, and ecaprolactam. The ¹H-NMR and IR spectra of these polymers are discussed. Copolymerization reactivity ratios of the vinyl monomer blocked by phenol with styrene and methyl methacrylate have been determined. Glass transition temperatures of these polymers have been determined by differential scanning calorimetry. The homo– and copolymers were crosslinked in the presence of ethylene diamine, and the gels obtained were examined by IR spectra.     

Electroinitiated Polymerization of Styrene in a Mixed Two-Phase Medium

In extension of our earlier work on electroinitiated polymerization in biphasic media, the electroinitiated polymerization of styrene has been studied using a mixed two-phase system in which formamide together with some added electrolyte is used as the polar phase and the monomer in the bulk form as the nonpolar phase. Among a series of zinc and ferric salts used as the electrolyte, ZnBr₂ was found to be the most effective. The polymer obtained has a molecular weight of 44–47 ± 10³. The effects of various other parameters, such as the dependence of polymer yield on current, the concentration of the electrolyte, the temperature, and the stirring, have also been examined, and a plausible mechanism based on the electrochemical formation of radicals involving a CT complex has been suggested.     

Polymerization of 1-aryl-2-trimethylsilylacetylenes by transition metal catalysts(II)

Polymerization of 1-aryl-2-trimethylsilylacetylene (aryl = thienyl, furyl, and pyridyl) was carried out by transition metal catalysts. The polymer yield was generally low due to the steric hindrance. R₄Sn (R = Me, n-Bu, Ph) exhibits some cocatalytic activities with respect to polymer yield and molecular weight. On the other hand, the polymerization was decelerated when organoaluminum compounds were used as cocatalysts. The polymer yield increased in the following order: phenyl > thienyl > furyl > pyridyl, according to the aryl substituents. The NMR (¹H- and ¹³C-), IR, and UV-visible spectra indicated that the resulting polymers have a linear conjugated polyene structure each containing the aromatic substituent and trimethylsilyl group. From ¹H-NMR integration, it was found that the resulting polymers are partially desilylated depending on the substituents of monomer and the polymerization conditions. The solubility behavior, stability and fluoride-ion induced desilylation reaction of the polymers were also studied.     

Atom transfer radical polymerization of 1-phenoxycarbonyl ethyl methacrylate monomer

Atom transfer radical polymerization conditions with copper(I) bromide/2,2^′-bipyridine (Cu/2,2^′-bpy) as the catalyst system were employed for the homopolymerization and random copolymerization of 1-phenoxycarbonyl ethyl methacrylate (PCMA) with methyl methacrylate (MMA). Temperature studies indicated that the polymerizations occurred smoothly in bulk at 110 °C. Poly(PCMA)(polydispersity index=1.27) homopolymer was characterized and then used as macroinitiator for increasing its molecular weight. The homopolymerization of PCMA was also carried out under free radical conditions using 2,2^′-azobisisobutyronitrile as an initiator.The monomer and polymers were characterized by FT-IR and ¹H and ¹³C-NMR techniques. The glass transition temperatures, the solubility parameters and average-molecular weights of the polymers were determined. Thermal stabilities of the polymers were given as compared with each other by using TGA curves. Thermal degradation products of poly(PCMA)s obtained by ATRP and free radical polymerization were compared with each other by using ¹H-NMR technique.     

对苯二胺和均苯三酸及对氨基苯甲酸制备可溶性芳香聚酰胺共聚物的研究

分别通过一步加料和分步加料的方法,以对苯二胺(A2)、均苯三酸(B3)和对氨基苯甲酸(AB)为原料进行溶液缩聚反应,制备了具有良好溶解性的芳香聚酰胺共聚物.产物的结构通过IR、1H-NMR得到证实.采用IR和1H-NMR对一步加料共聚反应的共聚行为进行研究,并初步考察了3种不同单体对反应的影响.     

Benzo-12-crown-4 modified N-heterocyclic carbene for organocatalyst: Synthesis,characterization and degradation of block copolymers of ϵ-caprolactone with L-lactide

A set of poly(L-lactide)-poly(?-caprolactone) diblock copolymers (AB) and poly(L-lactide)-poly(?-caprolactone)-poly(L-lactide) triblock copolymers (ABA) with predictable molecular weights and relatively narrow distributions were synthesized by ring-opening polymerization of successively added ?-caprolactone (?-CL) and L-lactide (LLA) using 4-methyl benzo-12-crown-4 imidazol-2-ylidene as catalyst. The effects of polymerization conditions, such as reaction time, temperature, monomer/catalyst molar ratio and monomer concentration on the copolymerization have been discussed in detail. The resulting copolymers were characterized by ¹H-NMR, ¹³C-NMR, IR, GPC and DSC methods which confirmed the successful synthesis of block copolymers of LLA and ?-CL. Hydrolytic degradation of the polymers showed that the PLLA-PCL-PLLA copolymer exhibited faster degradation as compared with the PCL homopolymer in alkaline medium at 37°C.     

Electroinitiated polymerization of acrylonitrile in aqueous sulphuric acid

The electroinitiated polymerization of acrylonitrile in aqueous sulphuric acid has been investigated. The polymerization, which occurs at the anode through the formation of radicals from HSO₄^?, is heterogeneous in nature and shows the occurrence of occlusion phenomena. A remarkable after-effect, connected with the occlusion of free radicals, was observed. Chain transfer to monomer, solvent and polymer have sufficiently low values to allow the formation of a polymer with high molecular weight.     

Synthesis and characterization of graft copolymers based on polyepichlorohydrin via reversible addition-fragmentation chain transfer polymerization

In this study, synthesis of poly(epichlorohydrin-g-methyl methacrylate) graft copolymers by reversible addition-fragmentation chain transfer (RAFT) polymerization was reported. For this purpose, epichlorohydrin was polymerized by using HNO₃ via cationic ring-opening mechanism. A RAFT macroinitiator (macro-RAFT agent) was obtained by the reaction of potassium ethyl xanthogenate and polyepichlorohydrin. The graft copolymers were synthesized using macro-RAFT agent as initiator and methyl methacrylate as monomer. The synthesis of graft copolymers was conducted by changing the time of polymerization and the amount of monomer-initiator concentration that affect the RAFT polymerization. The effects of these parameters on polymerization were evaluated via various analyses. The characterization of the products was determined using ¹H-nuclear magnetic resonance (¹H-NMR), Fourier-transform infrared spectroscopy, gel-permeation chromatography, thermogravimetric analysis, elemental analysis, and fractional precipitation techniques. The block lengths of the graft copolymers were calculated by using ¹H-NMR spectrum. It was observed that the block length could be altered by varying the monomer and initiator concentrations.