Application of capillary electrophoresis- electrospray-mass spectrometry to the separation and characterization of isomeric lipopolysaccharides of Neisseria meningitidis

A capillary electrophoresis-electrospray-mass spectrometry technique for the characterization of lipopolysaccharides (LPSs) was developed, permitting the separation of trace-level O-deacylated LPS isoforms for subsequent structural characterization using tandem mass spectrometry (MS/MS). The separation buffer and electrospray interface were optimized first using O-deacylated LPS samples from large-scale preparations. It was found that with microelectrospray or sheath-solution interface, we could separate LPS in anionic forms and detect them using either negative or positive ion mode MS. For negative ion detection mode MS, 30 mM morpholine with addition of 5% v/v methanol was employed as separation buffer. When positive ion detection mode MS was required, 10 mM ammonium acetate with addition of 5% methanol was used as separation buffer. The structural assignments obtained from MS/MS and capillary zone electrophoresis-electrospray-MS (CZE-ESMS) analyses enabled the identification of isomeric glycoforms. Application of this technique to the analysis of LPS from the galE mutants of Neisseria meningitidis strain BZ157 B5+ revealed the presence of isomeric glycoforms, in which the location of a functional group phosphoethanolamine was found to be in either inner core or lipid A-OH regions. The described technique was also applied to the analysis of LPS samples from the galE mutant of N. meningitidis strains F1576 A4+ and A4-. The occurrence of isomeric LPS glycoforms differing by the location or presence of neutral sugar residues, such as hexoses, can also be characterized using MS/MS.     

New conditions for matrix-assisted laser desorption/ionization mass spectrometry of native bacterial R-type lipopolysaccharides

A new sample preparation method for matrix-assisted laser desorption/ionization (MALDI) analysis of native rough-type lipopolysaccharides (R-type LPSs) is presented. In our MALDI mass spectra, besides the [M--H](-) ions, abundant ions originating from the cleavage between the 3-deoxy-D-manno-oct-2-ulosonic acid (Kdo) unit and the lipid A moiety are always present, giving important pieces of information about the structure of the molecules analyzed. Remarkably, in most cases, the comparison of the MALDI mass spectra of the intact R-type LPS with the O-deacylated one allowed us to obtain the structure of the lipid A moiety.     

Capillary electrophoretic and mass spectrometric analysis of a polydisperse fluorosurfactant

A fluorosurfactant has been studied using capillary electrophoresis and mass spectrometry. The fluorosurfactant, FC134, can be used as a buffer additive in capillary electrophoresis in order to decrease wall adsorption of proteins and in micellar electrokinetic chromatography. However, it has been discovered that this fluorosurfactant is polydisperse, thus containing substances with different lengths and structures. In this work, the fluorosurfactant sample components were separated by capillary electrophoresis. An uncoated as well as a poly(vinyl alcohol)-coated capillary were used with running electrolytes containing methanol and acetic acid. Following the capillary electrophoretic separation, fractions were collected for further analysis by MALDI-MS. Non-fractionated samples were also analyzed both by MALDI-MS and by ESI-MS.     

离线二维液相色谱-串联质谱法检测姜黄中姜黄素类和倍半萜类化合物

采用二维高效液相色谱-电喷雾质谱法,以新型色谱填料ClickCD为第一维分离材料,WatersXTerraMSC18柱作为第二维,以乙腈和0.2%甲酸-水为梯度洗脱流动相,对姜黄中的姜黄素类和倍半萜类化合物进行分离鉴定.结果表明,基于不同分离机理的ClickCD和C18二维色谱系统具有分离度高、正交性好的优点,使待测化合物得到了有效分离.特别是与高灵敏度的质谱联用,可以大大提高化合物的鉴定能力.通过与对照品的色谱保留时间和质谱数据对比,并结合文献报道,共鉴定了20个姜黄素类化合物和19个倍半萜类化合物,其中27个为对照品的同分异构体.为中药化合物的表征和活性化合物的制备提供了有效方法.     

Non-aqueous capillary electrophoresis with red light emitting diode absorbance detection for the analysis of basic dyes

Non-aqueous capillary electrophoresis was evaluated for the separation of five hydrophobic basic blue dyes for application in forensic dye analysis. The use of a red light emitting diode as a high intensity, low-noise light source provided sensitive detection of the blue dyes while also allowing the evaluation of solvents that absorb strongly in the UV region. Excellent peak shapes and separation selectivity were obtained in methanol, ethanol, acetonitrile and dimethylsulfoxide, however water, tetrahydrofuran, dimethylformamide and acetone were unsuitable as solvents due to poor peak shapes and a lack of sensitivity, most likely due to adsorption onto the capillary wall. Due to the known compatibility of methanol with capillary electrophoresis–mass spectrometry, this solvent was examined further with the relative acidity/basicity of the electrolyte being optimised with an artificial neural network. The optimised method was examined for the separation of ink samples from 6 fibre tip and 2 ball point blue or black pens and showed that a unique migration time for the main dye component in seven of the eight pens could be obtained.     

Using a nanoelectrospray-differential mobility spectrometer-mass spectrometer system for the analysis of oligosaccharides with solvent selected control over ESI aggregate ion formation

Differential mobility spectrometry (DMS), also commonly referred to as high field asymmetric waveform ion mobility spectrometry (FAIMS) is a rapidly advancing technology for gas-phase ion separation. The interfacing of DMS with mass spectrometry (MS) offers potential advantages over the use of mass spectrometry alone. Such advantages include improvements to mass spectral signal/noise, orthogonal/complementary ion separation to mass spectrometry, enhanced ion and complexation structural analysis, and the potential for rapid analyte quantitation. In this report, we demonstrate the successful use of our nanoESI-DMS-MS system, with a methanol drift gas modifier, for the separation of oligosaccharides. The tendency for ESI to form oligosaccharide aggregate ions and the negative impact this has on nanoESI-DMS-MS oligosaccharide analysis is described. In addition, we demonstrate the importance of sample solvent selection for controlling nanoESI oligosaccharide aggregate ion formation and its effect on glycan ionization and DMS separation. The successful use of a tetrachloroethane/methanol solvent solution to reduce ESI oligosaccharide aggregate ion formation while efficiently forming a dominant MH(+) molecular ion is presented. By reducing aggregate ion formation in favor of a dominant MH(+) ion, DMS selectivity and specificity is improved. In addition to DMS, we would expect the reduction in aggregate ion complexity to be beneficial to the analysis of oligosaccharides for other post-ESI separation techniques such as mass spectrometry and ion mobility. The solvent selected control over MH(+) molecular ion formation, offered by the use of the tetrachloroethane/methanol solvent, also holds promise for enhancing MS/MS structural characterization analysis of glycans.     

Analysis for metallothioneins using coupled techniques

Analytical chemistry of metallothioneins based on the coupling of a high resolution separation technique with an element or species selective detection technique is discussed. The role of size-exclusion chromatography (SEC) with on-line atomic spectrometric detection for the quantification of metallothionein fraction in cell cytosols is evaluated. Particular attention is given to the conditions for the separation of metallated metallothionein isoforms (MT-1, MT-2, MT-3) and sub-isoforms within these classes by anion-exchange and reversed-phase HPLC. Techniques for interfacing chromatography with atomic absorption spectrometry (AAS), inductively coupled plasma atomic emission spectrometry (ICP AES) and ICP mass spectrometry (MS) are assessed. The potential of electrospray (tandem) mass spectrometry for the characterization of metallothionein isoforms with respect to molecular mass and aminoacid sequence is highlighted. Perspectives for capillary zone electrophoresis (CZE), microbore and capillary HPLC with ICP MS and electrospray MS(/MS) detection for the probing of metallothioneins are discussed. Applications of hyphenated techniques to the analysis of real-world samples are reviewed.     

Matrix-assisted laser desorption/ionization-time of flight-mass spectrometry of lipopolysaccharide species separated by slab-polyacrylamide gel electrophoresis: high-resolution separation and molecular weight determination of lipooligosaccharides from Vibrio fischeri strain HMK

We recently demonstrated that the combined use of lipopolysaccharide (LPS) reverse staining and high-efficiency passive elution techniques can be successfully used as a suitable interface between LPS slab-gel separation and electrospray ionization-mass spectrometry (ESI-MS) of LPS-derived oligosaccharides. Here, we extend our micropurification strategy for the analysis of O-deacylated LPS forms from Vibrio fischeri HMK after recovery from single reverse-stained LPS bands using matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS). The quantities (30-40 microg) obtained from the two gel-resolved LPS bands were sufficient to allow MALDI-TOF-MS detection of O-deacylated LPS glycoforms at m/z 3767.1, 3890.1 for the high-molecular-weight or at m/z 2522.5, 2645.4, 2725.7, and 2848.7 for the low-molecular-weight LPS band. These LPS band heterogeneities resulted not only from variations in the oligosaccharide region of the LPS but also from two phosphorylation states of the lipid A (diphosphoryl and diphosphoryl plus a single phosphoethanolamine substitution). On the other hand, MALDI-TOF mass spectra of the separated LPS bands displayed reduced heterogeneity and increased signal-to-noise ratios as compared to spectra of the unpurified LPS. Furthermore, micropurification of LPS bands prior MALDI-TOF-MS led to a higher sensitivity of detection of less abundant low-molecular-weight LPS glycoforms. Taken together, this and our previous study on gel-micropurified LPS using ESI definitively show how one can unambiguously determine the different molecular species contained within each gel-separated LPS band, their relative abundance and oligosaccharide sequences.     

Analysis of phospholipase A2 glycosylation patterns from venom of individual bees by capillary electrophoresis/electrospray ionization mass spectrometry using an ion trap mass spectrometer

A method based on tryptic digestion, ultrafiltration and capillary electrophoresis/mass spectrometry (CE/MS) has been developed for the analysis of the glycosylation pattern in the phospholipase A2 (PLA) of individual honeybees. Without reducing the disulfide bonds, PLA was digested with trypsin and filtered with a 3 kDa molecular weight (MW) cut-off membrane. With this procedure, the glycopeptides could be isolated from the nonglycosylated peptides. After tryptic digestion and ultrafiltration, the disulfide bonds were reduced before analysis by CE. To reduce the adsorption, CE separation was performed on successive multiple ionic-polymer (SMIL) polybrene (PB) coated capillary columns. The SMIL-PB columns allowed partial separation of the glycopeptides and eight glycopeptides were identified by on-line coupling of CE with electrospray ionization (ESI) mass spectrometry. The analysis of phospholipase A2 from the venom of individual bees indicated that the variation and relative abundances of different glycopeptides were similar between the younger and the older bees.     

Use of a parallel path nebulizer for capillary-based microseparation techniques coupled with an inductively coupled plasma mass spectrometer for speciation measurements

A low flow, parallel path Mira Mist CE nebulizer designed for capillary electrophoresis (CE) was evaluated as a function of make-up solution flow rate, composition, and concentration, as well as the nebulizer gas flow rate. This research was conducted in support of a project related to the separation and quantification of cobalamin (vitamin B-12) species using microseparation techniques combined with inductively coupled plasma mass spectrometry (ICP-MS) detection. As such, Co signals were monitored during the nebulizer characterization process. Transient effects in the ICP were studied to evaluate the suitability of using gradients for microseparations and the benefit of using methanol for the make-up solution was demonstrated. Co signal response changed significantly as a function of changing methanol concentrations of the make-up solution and maximum signal enhancement was seen at 20% methanol with a 15 μl/min flow rate. Evaluation of the effect of changing the nebulizer gas flow rates showed that argon flows from 0.8 to 1.2 l/min were equally effective. The Mira Mist CE parallel path nebulizer was then evaluated for interfacing capillary microseparation techniques including capillary electrophoresis (CE) and micro high performance liquid chromatography (μHPLC) to inductively coupled plasma mass spectrometry (ICP-MS). A mixture of four cobalamin species standards (cyanocobalamin, hydroxocobalamin, methylcobalamin, and 5′ deoxyadenosylcobalamin) and the corrinoid analogue cobinamide dicyanide were successfully separated using both CE-ICP-MS and μHPLC-ICP-MS using the parallel path nebulizer with a make-up solution containing 20% methanol with a flow rate of 15 μl/min.     

Open-tubular capillary electrochromatography-mass spectrometry with sheathless nanoflow electrospray ionization for analysis of amino acids and peptides

A novel, rugged sheathless capillary electrochromatography-electrospray ionization (CEC-ESI) device, in which an open-tubular separation capillary and an electrospray tip are integrated with a Nafion tubing junction, is coupled to mass spectrometry (MS) for the analysis of amino acids and peptides. A stable electrospray was generated at nanoflow rates by applying a positive electrical potential at the Nafion membrane junction. To sustain the stable spray, an electroosmotic flow (EOF) to the spray was supported by coating the fused silica capillary with Lupamin, a high-molecular-weight linear positively charged polyvinylamine (PVAm) polymer, which also minimizes analyte adsorption. Electrochromatographic separation of amino acids and peptides was further enhanced by the chromatographic selectivity of Lupamin stationary phase for these molecules. The device was very reliable and reproducible for CEC-ESI-MS analyses of amino acids and peptides for over a hundred injections. The separation and detection behaviors of amino acids and peptides under different conditions including pH, concentration, and composition of mobile phases on Lupamin-coated and uncoated capillaries have been investigated. The relationship between nano electrospray stability and EOF is discussed.     

Reflectron MALDI TOF and MALDI TOF/TOF mass spectrometry reveal novel structural details of native lipooligosaccharides

Lipooligosaccharides (LOS) are powerful Gram-negative glycolipids that evade the immune system and invade host animal and vegetal cells. The structural elucidation of LOS is pivotal to understanding the mechanisms of infection at the molecular level. The amphiphilic nature of LOS has been the main obstacle for structural analysis by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS). Our approach has resolved this important issue and has permitted us to obtain reflectron MALDI mass spectra of LOS to reveal the fine chemical structure with minimal structural variations. The high-quality MALDI mass spectra show LOS species characteristic of molecular ions and defined fragments due to decay in the ion source. The in-source decay yields B-type ions, which correspond to core oligosaccharide(s), and Y-type ions, which are related to lipid A unit(s). MALDI tandem time-of-flight (TOF/TOF) MS of lipid A allowed for the elucidation of its structure directly from purified intact LOS without the need for any chemical manipulations. These findings constitute a significant advancement in the analysis of such an important biomolecule by MALDI MS.     

Hyphenated techniques for the characterization and quantification of metallothionein isoforms

Recent developments in the coupling of highly selective separation techniques such as capillary electrophoresis (CE) and high-performance liquid chromatography (HPLC) to element-specific and molecule-specific detectors, such as inductively-coupled plasma mass spectrometry (ICP-MS) and electrospray ionization-tandem mass spectrometry (ESI-MS/MS) for the characterization and quantification of metallothioneins (MTs) are critically reviewed and discussed. This review gives an update based on the literature over the last five years. The coupling of CE to ICP-MS is especially highlighted. As a result of progress in new interface technologies for CE-ICP-MS, research topics presented in the literature are changing from "the characterization of interfaces by metallothioneins" to the "characterization of metallothioneins by CE-ICP-MS". New applications of CE-ICP-MS to the analysis of MTs in real samples are summarized. The potential of the on-line isotope dilution technique for the quantification of MTs and for the determination of the stoichiometric composition of metalloprotein complexes is discussed. Furthermore, a selection of relevant papers dealing with HPLC-ICP-MS for MT analysis are summarized and compared to those dealing with CE-ICP-MS. In particular, the use of size-exclusion (SE)-HPLC as a preliminary separation step for metallothioneins in real samples prior to further chromatographic or electrophoretic separations is considered. Additionally, the application of electrospray ionisation-tandem mass spectrometry (ESI-MS/MS) for the identification of metallothionein isoforms following electrophoretic or chromatographic separation is discussed.     

On-Line HPLC-UV-mass spectrometry and tandem mass spectrometry for the rapid delineation and characterization of differences in complex mixtures: a case study using toxic oil variants

An integrated differential approach to the characterization of complex mixtures is presented which includes the targeting of liquid chromatography (LC) peaks for identification using characteristic UV adsorption of the LC peak, subsequent molecular weight and formula determination using accurate mass LC mass spectrometry (MS), and structure characterization using accurate mass LC-tandem mass spectrometry. The use of differential UV adsorption aids in narrowing the scope of the study to only specific peaks of interest. Accurate mass measurement of the molecular ion species provides molecular weight information as well as atomic composition information. The tandem MS (MS/MS) spectra provide fragmentation information which allows for structural characterization of each component. Accurate mass assignment of each of the fragment ions in the MS/MS spectrum provides atomic composition for each of the fragment ions and thus further aids in the structural characterization. These experiments are facilitated through the use of on-line LC-MS and LC-MS/MS with in-line UV detection. A synthetic toxic oil (STO) related to Toxic Oil Syndrome is studied with a focus on possible contaminants resulting from the interaction of aniline, used as a denaturant, with the normal components of the oil. A differential analysis between the STO and a control oil is performed. LC peaks were targeted using UV absorbance to indicate the possible presence of the aniline moiety. Further differential analysis was performed through the determination of the MS signals associated with each component separated on the LC. Finally, the MS/MS data was also used to determine if the fragmentation of the targeted components indicated the presence of aniline. The MS/MS and accurate mass data were used to assign the structures for the targeted components.     

Recent developments in the characterization of nucleic acids by liquid chromatography,capillary electrophoresis,ion mobility,and mass spectrometry (2010–2020)

The development of new strategies for the analysis of nucleic acids has gained momentum due to the increased interest in using these biomolecules as drugs or drug targets. The application of new mass spectrometry ion activation techniques and the optimization of separation methods including liquid chromatography, capillary electrophoresis, and ion mobility have allowed more detailed characterization of nucleic acids and oligonucleotide therapeutics including confirmation of sequence, localization of modifications and interaction sites, and structural analysis as well as identification of failed sequences and degradation products. This review will cover tandem mass spectrometry methods as well as the recent developments in liquid chromatography, capillary electrophoresis, and ion mobility coupled to mass spectrometry for the analysis of nucleic acids and oligonucleotides.     

Current applications of capillary electrophoresis-mass spectrometry for the analysis of biologically important analytes in urine (2017 to mid-2021): A review

Capillary electrophoresis coupled online with mass detection is a modern tool for analyzing wide ranges of compounds in complex samples, including urine. Capillary electrophoresis with mass spectrometry allows the separation and identification of various analytes spanning from small ions to high molecular weight protein complexes. Similarly to the much more common liquid chromatography-mass spectrometry techniques, the capillary electrophoresis separation reduces the complexity of the mixture of analytes entering the mass spectrometer resulting in reduced ion suppression and a more straightforward interpretation of the mass spectrometry data. This review summarizes capillary electrophoresis with mass spectrometry studies published between the years 2017 and 2021, aiming at the determination of various compounds excreted in urine. The properties of the urine, including its diagnostical and analytical features and chemical composition, are also discussed including general protocols for the urine sample preparation. The mechanism of the electrophoretic separation and the instrumentation for capillary electrophoresis with mass spectrometry coupling is also included. This review shows the potential of the capillary electrophoresis with mass spectrometry technique for the analyses of different kinds of analytes in a complex biological matrix. The discussed applications are divided into two main groups (capillary electrophoresis with mass spectrometry for the determination of drugs and drugs of abuse in urine and capillary electrophoresis with mass spectrometry for the studies of urinary metabolome).     

Atmospheric Pressure Photoionization as a Powerful Tool for Large-Scale Lipidomic Studies

Lipidomic studies often use liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS) for separation, identification, and quantification. However, due to the wide structural diversity of lipids, the most apolar part of the lipidome is often detected with low sensitivity in ESI. Atmospheric pressure (APPI) can be an alternative ionization source since normal-phase solvents are known to enhance photoionization of these classes. In this paper, we intend to show the efficiency of APPI to identify different lipid classes, with a special interest on sphingolipids. In-source APPI fragmentation appears to be an added value for the structural analysis of lipids. It provides a detailed characterization of both the polar head and the non polar moiety of most lipid classes, and it makes possible the detection of all lipids in both polarities, which is not always possible with ESI.     

Complementary middle‐down and intact monoclonal antibody proteoform characterization by capillary zone electrophoresis – mass spectrometry

High‐resolution capillary zone electrophoresis – mass spectrometry (CZE‐MS) has been of increasing interest for the analysis of biopharmaceuticals. In this work, a combination of middle‐down and intact CZE‐MS analyses has been implemented for the characterization of a biotherapeutic monoclonal antibody (mAb) with a variety of post‐translational modifications (PTMs) and glycosylation structures. Middle‐down and intact CZE separations were performed in an acidified methanol‐water background electrolyte on a capillary with a positively charged coating (M7C4I) coupled to an Orbitrap mass spectrometer using a commercial sheathless interface (CESI). Middle‐down analysis of the IdeS‐digested mAb provided characterization of PTMs of digestion fragments. High resolution CZE enabled separation of charge variants corresponding to 2X‐deamidated, 1X‐deamidated, and non‐deamidated forms at baseline resolution. In the course of the middle‐down CZE‐MS analysis, separation of glycoforms of the F_C/2 fragment was accomplished due to hydrodynamic volume differences. Several identified PTMs were confirmed by CZE‐MS². Incorporation of TCEP‐HCl reducing agent in the sample solvent resulted in successful analysis of reduced forms without the need for alkylation. CZE‐MS studies on the intact mAb under denaturing conditions enabled baseline separation of the 2X‐glycosylated, 1X‐glycosylated, and aglycosylated populations as a result of hydrodynamic volume differences. The presence of a trace quantity of dissociated light chain was also detected in the intact protein analysis. Characterization of the mAb under native conditions verified identifications achieved via intact analysis and allowed for quantitative confirmation of proteoforms. Analysis of mAbs using CZE‐MS represents a complementary approach to the more conventional liquid‐chromatography – mass spectrometry‐based approaches.     

Mass spectrometric strategy for the characterization of lipooligosaccharides from Neisseria gonorrhoeae 302 using FTICR

The lipooligosaccharides (LOS) of Neisseria gonorrhoeae 302 were profiled using Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). Using techniques developed in this laboratory, the topology and some of the linkages of the LOS were determined. Mass spectrometric analysis in the negative ion mode yielded a glycoform of the composition: Hex3 Hep2 Hxn1 PEA1 KDO2 DPLA. The composition was confirmed through exact mass measurements, which showed only a 2 ppm error between the exact mass and theoretical mass. Although the core structure has been postulated previously, the positioning of the three hexose moieties were in question for this particular strain of N. gonorrhoeae. Topology assignment was performed through collision-induced dissociation analysis of the O-deacylated glycoform in the negative ion mode followed by submission to the saccharide topology analysis tool (STAT) computer program, which confirmed the topology assignment. It was found that the three hexoses were added to the Hep[I] of the conserved core of N. gonorrhoeae in a linear fashion, while Hep[II] remains unbranched. Linkage position analysis was performed through application of a mild acid hydrolysis technique followed by collision-induced dissociation of the sodiated precursor ions, yielding a 1 --> 4 linkage between the terminating and penultimate hexoses.