How does column packing microstructure affect column efficiency in liquid chromatography?

Full three-dimensional computer simulations of the fluid flow and dispersion characteristics of model nonporous chromatographic packings are reported. Interstitial porosity and packing defects are varied in an attempt to understand the chromatographic consequences of the packing microstructure. The tracer zone dispersion is calculated in the form of plate height as a function of fluid velocity for seven model particle packs where particles are selectively removed from the packs in clusters of varying size and topology. In an attempt to examine the consequences of loose but random packs, the velocities and zone dispersion of seven defect-free packs are simulated over the range 0.36< or =epsilon< or =0.50, where epsilon is the interstitial porosity. The results indicate that defect-free loose packings can give good chromatographic efficiency but the efficiency can vary depending on subtle details of the pack. When the defect population increases, the zone dispersion increases accordingly. For a particle pack where 6% of the particles are removed from an epsilon=0.36 pack, approximately 33% of the column efficiency is lost. These results show that it is far more important in column packing to prevent defect sites leading to inhomogeneous packing rather than obtaining the highest density pack with the smallest interstitial void volume.     

Zeolitic imidazolate framework-67–modified open-tubular column with cyclodextrin for enantioseparation in capillary electrochromatography

The histidine-modified zeolitic imidazolate framework [His-ZIF-67] was prepared with the histidine, 2-methylimidazole, and Co²⁺ under ambient temperature. His-ZIF-67 was bonded via a glycidyl methacrylate copolymer to the internal surface of capillary and then functionalized with the NH₂-β-cyclodextrin (NH₂-β-CD). The materials were characterized by field emission scanning electron microscopy, high-resolution transmission electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, N₂ adsorption–desorption isotherm, X-ray diffraction, and X-ray photoelectron spectroscopy. In comparison with the NH₂-β-CD@capillary, the NH₂-β-CD@His-ZIF-67@capillary-coated column shows significantly enhanced resolution for chiral molecules. The NH₂-β-CD@His-ZIF-67@capillary column achieved the baseline separation of amlodipine and metoprolol (the resolution of amlodipine: 1.70; metoprolol: 1.50) and the partial separation of atenolol and propranolol (the resolution of atenolol: 1.03; propranolol: 0.60). These were attributed to the histidine modification and the features of ZIF-67, including an excellent surface area and the abundant porosity. The pH and proportion of organic modifier in the buffer were crucial for enantioseparation performance and were evaluated in detail. The fabricated NH₂-β-CD@His-ZIF-67@capillary-coated column showed good stability and repeatability (relative standard deviation <6.3%). The molecular modeling with AutoDock and grand canonical ensemble was carried out to evaluate the interactions between chiral stationary phase and racemic drugs.     

How to generate peak capacity in column liquid chromatography. The Halász nomograms revised

For the separation of complex samples it is necessary to run the analyses on a chromatographic set-up with high peak capacity. The concept of peak capacity is broader than the one of the theoretical plate numbers because it covers both the column characteristics and the run time of the separation. Therefore, a desired peak capacity can be obtained with many combinations of particle diameter, column length, pressure, and analysis time: either with a short column, small-diameter packing, short analysis time, and high pressure; or with less pressure at the expense of a longer column, larger-diameter packing, and longer analysis time. These combinations can be presented in the form of nomograms with the analysis time as x-axis and the peak capacity as y-axis and including particle diameter, column length, and pressure as parameters. The practical limits of the peak capacity are given by the maximum pressure delivered by the pump in use. These considerations are valid for isocratic and gradient separations as well. They are based on a 1982 paper by Halász and G?rlitz and apply the concept of HPLC columns used at their Van Deemter optimum.     

Development of novel fiber-packed needle interface for off-line reversed-phase liquid chromatography–capillary gas chromatography

For two-dimensional reversed-phase liquid chromatography–gas chromatography (2D RPLC–GC), a specially-designed needle packed with a polymer-coated fibrous stationary phase was introduced as a novel interface. The bundle of synthetic fibers coated with polydimethylsiloxane (PDMS) was packed into the head section of the needle, and served as the extraction medium. Using the post-column dilution of the LC eluent by water and subsequent extraction with the needle interface, the analyte was successfully concentrated to the PDMS phase on the fibrous support in the needle. The concentrated analytes were directly injected to GC system by inserting the needle to a heated GC injector. 2D separations of aliphatic and aromatic hydrocarbons, and also kerosene-extract were performed with the off-line RPLC–GC system interfaced by the needle extractor. The results suggested that the fiber-packed needle interface could be one of the simple and effective approaches to develop an on-line coupled LC–GC system.     

Trace determination of 10 β-lactam antibiotics in environmental and food samples by capillary liquid chromatography

A sensitive and reliable method using capillary HPLC with UV-diode array detection (DAD) has been developed and validated for the trace determination of residues of 10 β-lactam antibiotics of human and veterinary use, in milk, chicken meat and environmental water samples. The analytes included ampicillin, amoxicillin, penicillin V, penicillin G, cloxacillin, oxacillin, dicloxacillin, nafcillin, piperacillin and clavulanic acid. Legal levels are regulated by the EU Council regulation 2377/90 in animal edible tissues for these compounds. For food analysis, a solid-phase extraction (SPE) procedure consisting in a tandem of Oasis HLB and Alumina N cartridges was applied for off-line preconcentration and cleanup. For water analysis, the first step was only necessary. The limits of detection for the studied compounds were between 0.04–0.06 μg l⁻¹ for water samples and 0.80–1.40 μg l⁻¹ (or μg kg⁻¹) in the case of foods derived from animals. Average recoveries for fortified samples at different concentration levels ranged between 82.9% and 98.2%, with relative standard deviations (RSDs) lower than 9%. The method showed the advantages of capillary HPLC for the detection of these widely applied antibiotics in different samples at very low concentration levels.     

Preparation of a butyl–silica hybrid monolithic column with a “one-pot” process for bioseparation by capillary liquid chromatography

A butyl–silica hybrid monolithic column for bioseparation by capillary liquid chromatography (cLC) was prepared with butyl methacrylate and alkoxysilanes through a “one-pot” process. The effects of polycondensation temperature, volume percentage of N,N′-dimethylformamide, and content of cetyltrimethylammonium bromide and butyl methacrylate on the morphologies of the hybrid monolithic columns prepared were investigated in detail. Baseline separations of proteins and small peptides on the hybrid monolithic column were achieved by cLC with gradient elution. In addition, the resulting hybrid column was also applied for analysis of tryptic digests of bovine serum albumin by cLC coupled with tandem mass spectrometry. The results demonstrate its potential application in separation of complex biological samples.     

Immobilization of chitosan in sol–gel phases for chiral open-tubular capillary electrochromatography

Three different approaches for immobilizing cross-linked chitosan molecules (CS-s) in sol–gel phases to form chiral OT-CEC capillaries were comparatively investigated in this study. To synthesize column I, a bare capillary was first silanized with triethoxysilane (TEOS) and then reacted with the reaction product of 3-glycidyloxypropyltrimethoxysilane (GTS) and CS-s. Column II was prepared by the silanization of a bare capillary with a mixture of TEOS and GTS silanes followed by reaction with CS-s. To obtain column III, all the reagents, including TEOS, GTS, and CS-s were reacted together in a bare capillary. The SEM images showed that the column I phase consisted of two distinct layers, GTS and TEOS sol–gel films, while column II and III phases were homogeneous phases. By elemental analysis, the chitosan contents of the columns were found to decrease in the order column I > II > III, which corresponded to the order of the electroosmotic mobility values obtained from the measurements of the electroosmotic flow in the columns. The retention factor and the selectivity for the chiral separation of phenylglycine enantiomers in the optimized Tris running buffer (100 mM, pH 7.5) also followed this decreasing order. Besides the strength of the interaction with the immobilized functional chitosan, the hydrophobicity of the column affected the resolution of enantiomeric samples. The hydrophilic alanine sample could only be resolved by column III, but the hydrophobic tryptophan and catechin enantiomers were better separated by columns I and II. A reverse-phase mechanism has been found in the separations. Furthermore, the resolution and analysis time of column I and II phases were superior to the phase simply bonded with molecular chitosan.     

Determination of triazines in honey by dispersive liquid–liquid microextraction high-performance liquid chromatography

Dispersive liquid–liquid microextraction (DLLME) high-performance liquid chromatography (HPLC) was developed for extraction and determination of triazines from honey. A room temperature ionic liquid, 1-hexyl-3-methylimidazolium hexafluorophosphate [C₆MIM][PF_6.], was used as extraction solvent and Triton X 114 was used as dispersant. A mixture of 175 μL [C₆MIM][PF₆] and 50 μL 10% Triton X 114 was rapidly injected into the 20 mL honey sample by syringe. After extraction, phase separation was performed by centrifugation and the sedimented phase was analyzed by HPLC. Some experimental parameters, such as type and volume of extraction solvent, concentration of dispersant, pH value of sample solution, salt concentration and extraction time were investigated and optimized. The detection limits for chlortoluron, prometon, propazine, linuron and prebane are 6.92, 5.84, 8.55, 8.59 and 5.31 μg kg⁻¹, respectively. The main advantages of the proposed method are simplicity of operation, low cost, high enrichment factor and extraction solvent volume at microliter level. Honey samples were analyzed by the proposed method and obtained results indicated that the proposed method provides acceptable recoveries and precisions.     

On-line trace enrichment — column liquid chromatography of polar pollutants in surface water using bifunctional membrane-based extraction-disk cartridges

Summary An on-line trace-enrichment system, using a bifunctional membrane extraction-disk cartridge, has been combined with a column liquid chromatography separation for the simultaneous determination of basic, neutral and acidic pollutants in surface water. The enrichment device consisted of a specially constructed holder containing both C-18 and cation-exchange disks. The holder can contain up to 25 disks of 0.5 mm thickness and 4.6 mm diameter. Before trace enrichment of 20 ml of surface water (pH 3.0), calcium ions were removed from the sample by means of an oxalic acid precipitation. Desorption of the cartridge was at elevated temperature using reversed-phase gradient elution; detection was performed with a diode-array UV absorbance detector. The detection limits for the test compounds in surface water are typically 0.5–2 g/l; the calibration graphs are linear from the lower limit of determination up to 50 g/l.     

Identification of sildenafil,tadalafil and vardenafil by gas chromatography–mass spectrometry on short capillary column

Sildenafil and its analogues (tadalafil and vardenafil) are phosphodiesterase type 5 inhibitors used in the treatment of male erectile dysfunction. Some dietary supplements, herbal preparations and food products which claim to enhance male sexual function have been found to be adulterated with these drugs. In this study, a gas chromatograph–mass spectrometer (GC–MS) assay was developed for identification of the drugs. In addition to good and short chromatographic separation that can be achieved within 6 min by using a short 10 m capillary column, no prior sample clean-up before GC–MS analysis was required, thus making this assay a cost saving and rapid method. Furthermore, the assay is specific as the identification of sildenafil, tadalafil and vardenafil were done by detection of molecular ions; m/z 474, 389 and 448, respectively, and several other characteristic ions resulted from the mass fragmentation of individual molecules. Using our currently developed assay, sildenafil and its analogues were successfully identified in food and herbal matrices.     

Identification of allergenic milk proteins markers in fined white wines by capillary liquid chromatography–electrospray ionization-tandem mass spectrometry

A method based on capillary liquid chromatography combined with electrospray ionization-tandem mass spectrometry (CapLC–ESI-MS–MS) for the detection and identification of casein deriving peptides in fined white wine is described. This is the first step towards the development of a liquid chromatography mass spectrometric method for the detection/identification of markers of potentially allergenic milk proteins used as wine fining agents. The method demonstrated to be capable of detecting some peptides arising from α and β casein (with the relative aminoacidic sequences elucidated) in extracts of white wine fined with casein at 100 and 1000 μg/mL. This MS based approach appears to be a useful tool for screening purposes as well as a confirmatory tool for the unequivocal identification of caseins in ELISA positive samples.     

Characterization of adsorption processes in analytical liquid–solid chromatography

This review discusses nonlinear chromatographic methods of importance for proper characterization of the adsorption processes in analytical chromatographic systems, with focus on reversed-phase liquid chromatography. Linear methods such as the linear solvation energy relationship (LSER) method and the Snyder–Dolan hydrophobic-subtraction model will also be reviewed briefly. The nonlinear methods for adsorption isotherm determination and the tools for further treatment of the nonlinear adsorption data will be extensively treated in a way suitable for the general chromatographer. Applications of the various methods will be given and the outcome and conclusions will be discussed. Special emphasis will be placed on discussing the possibilities of combining linear and nonlinear methods in order to obtain a deeper and more complete investigation of the interactions in the actual phase system.     

Determination of tetramethrin in water by liquid microextraction–capillary electrophoresis

1. Download : Download full-size image

     

The meaning of ‘concentration’

Terminology within a small laboratory community can be informal without danger of misunderstanding, but communication with a wider audience and not least in publications, needs unequivocal terms for defined concepts. As an example, the many meanings of “concentration” are explored to present a systematic nomenclature, including a concept diagram.

Computer-assisted optimization of temperature programming and flow rate in capillary gas chromatography

A computer-assisted method is presented for simultaneous optimization of three-factor of temperature programming (initial temperature, temperature rising rate and carrier gas flow rate) for the separation of eleven compounds in capillary gas chromatography. The optimization of the separation over the experimental region is based on a special polynomial from fifteen preliminary experiments using the resolution as the selection criterion. Computer scanning technique was used for optimum selection on three dimensions. Excellent agreement was found between the predicted data and the experimental results.     

Optimization separation of five phosphoamidothioate enantiomers using a series of silica and chiral column by high-performance liquid chromatography

A computer-assisted method is described for optimization of multi-component,mobile phase selection for separation of five phosphoamidothioate enantiomers with a series of silica and chiral columns in normal phase HPLC.The method is based on the triangular solvent selection concept using a statistical scanning method.The optimization of the separation over the experimental region is based on a special polynomial estimation from seven experimental runs,and resolution (Rs) is used as the selection criterion.Excellent agreement was obtained between predicted and experimental data.     

High-temperature solvent stability of sol–gel germania triblock polymer coatings in capillary microextraction on-line coupled to high-performance liquid chromatography

Germania-based sol–gel organic–inorganic hybrid coatings were prepared for on-line coupling of capillary microextraction with high-performance liquid chromatography. For this, a germania-based sol–gel precursor, tetra-n-butoxygermane and a hydroxy-terminated triblock copolymer, poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) were used. These sol–gel germania triblock polymer coatings were chemically anchored to the inner walls of a fused silica capillary (0.25 mm I.D.) in course of its evolution from the sol solution. Scanning electron microscopy images of the sol–gel germania triblock polymer coating were obtained to estimate the coating thickness. For the first time, the analyte distribution constants between a sol–gel germania organic–inorganic hybrid coating and the samples (K_cs) were determined. For a variety of analytes from different chemical classes, including polycyclic aromatic hydrocarbons (PAHs), ketones, alcohols, phenols and amines, the K_cs values ranged from 8.1 × 10¹ to 5.6 × 10⁴. Also, for the first time, the stability of the sol–gel germania-based coating in high-temperature reversed-phase solvent environment was evaluated. The sol–gel germania triblock polymer coatings were capable of surviving exposure to high-temperature solvent conditions (200 °C) with little change in extraction capabilities. This demonstrates that sol–gel germania triblock polymer hybrid materials might be suitable for further applications in high-temperature HPLC. The reproducibility of the method for preparation of the sol–gel germania triblock polymer coatings was also evaluated, and the capillary-to-capillary RSD values ranged from 5.3 to 6.5%. The use of higher flow rates in extraction was found to significantly reduce the time required (from 30–40 to 10–15 min) to reach equilibrium between the sol–gel germania triblock polymer coating and the analytes in the sample solution.