二元稀土催化体系引发的异戊二烯定向聚合

最早用于共轭双烯烃定向聚合的二元稀土催化体系是LnCl_3-AIR_3,它能引发丁二烯定、向聚合,但催化活性不高。后来,报道了聚合活性较高的氯化稀土催化剂,主要是在二元稀土催化体系中添加适量的醇类试剂。最近,又有新型烷氧基氯化稀土催化     

聚合物载体—稀土金属络合物的研究：ⅩⅤ.聚（苯乙烯—丙烯酰胺）载体…

研究了聚载体－氯化姨络合物对异戊类聚合的催化行为．ＰＳＡＣ．ＮｄＣｌ３络合物保留了小分子稀土催化剂对双烯烃聚合的催化规律和高度的定向效应。络合物的催化活性随着Ｎｄ／Ｉｐ和Ａｌ／Ｎｄ比的增加而增加，所得聚异戊二烯的特性粘数「η」却随之下降。     

第二届稀土催化学术交流会在南京召开

中国稀土学会第二届稀土催化学术交流会于1984年10月25～30日在南京召开。参加会议的有高等院校、科研院所、工厂企业等31个单位的50名代表,宣读和交流了43篇论文。 本届会议论文内容广泛,包括有石油、化工、高分子聚合及催化燃烧等各个领域的研究成果,反映了我国稀土催化剂的研究水平和对生产所起的指导意义,其中进展较大的有:(1)自80年代开始在我国     

稀土催化双烯聚合研究的近期进展

稀土催化双烯聚合研究的近期进展杨继华，欧阳均（中国科学院长春应用化学研究所，长春１３００２２）自七十年代以来，有关稀土催化双烯配位聚合的研究，以其发展Ｚｉｅｇｌｅｒ－Ｎａｔｔａ定向聚合理论及开发合成橡胶新品种的重大科学意义，而成为国际上高分子化学及催...     

稀土络合催化炔烃和开环聚合新进展

本文综述了我国首创开拓的稀土络台催化聚合在炔烃和开环聚合方面的新进展.用稀土络合催化剂可以使乙炔、苯乙块在室温下聚合制备高顺式含量和抗氧化稳定性良好的聚炔烃膜;可以使环氧乙烷、环氧丙烷、环氧氯丙烷和环硫丙烷聚合制备高分子量聚合物;可以使丙交酯聚合制备可控分子量聚合物.     

In This Issue

封面:稀土是重要的稀有元素,资源有限,稀土催化材料是稀土资源尤其是高丰度轻稀土元素(镧、铈、镨等)重要的应用领域.为了反映稀土催化研究的新进展,推进稀土催化材料的发展,本期邀请了在稀土催化研究中比较活跃的课题组撰写了16篇文章组成稀土催化专刊,其中包括2篇综述、1篇快讯和13篇论文,内容主要涉及环境催化、石油化工和能源化工催化等过程.     

二（2,6—二叔丁基—4—甲基苯氧基）钐配合物催化丙烯腈聚合

首次报道用稀土有机配合物作为单组份催化剂催化丙烯腈聚合，研究了聚合条件对标题化合物的催化活性和所得聚丙烯腈的分子量及其结构的影响。     

含分子内配位Ln←O键的稀土有机化合物催化甲基丙烯酸甲酯聚合

 采用含有分子内配位Ln←O键、茂(茚)和环辛四烯(COT)混合配体的稀土有机化合物与三乙基铝体系催化甲基丙烯酸甲酯(MMA)的聚合,可以得到高分子量(Mη＞100×103),窄分子量分布(Mw/Mn＜3)的聚甲基丙烯酸甲酯(PMMA). 不同的配体及稀土元素可以影响这类稀土有机化合物的催化聚合活性. 化合物(η5-MeOCH2CH2C5H4)Nd(η8-C8H8)(THF)具有较高的活性(转化率91.0%,Mη=115.2×103). 考察了催化剂和助催化剂浓度,以及聚合温度和时间对(η5-cyclo-C4H7OCH2C9H6)Dy(η8-C8H8)/AlEt3体系催化聚合反应的影响. 结果表明,最佳聚合条件为: n(MMA)∶n(催化剂)∶n(助催化剂)=1?200∶1∶5,θ=60 ℃,t=32 h. 利用核磁共振和凝胶渗透色谱等技术对聚合物进行了表征.     

新型后过滤金属烯烃聚合催化剂——镍系烯烃聚合催化剂

镍系烯烃聚合催化剂是近年来受到广泛关注的一类新型催化剂，是配位催化研究的热点之一。这类催化剂具有高催化活性、单活性中心和良好的分子剪栽性，可以在分子层次上实现烯烃聚合的分子设计与组装。本文介绍了镍系烯烃聚合催化剂的发展和研究概况，并评述了聚合特性及最新研究进展。     

稀土Schiff碱配合物催化烷基异氰酸酯室温聚合

利用Schiff碱稀土配合物Ln（H2Salen）2Cl3·2C2H5OH与AI（i—Bu）3组成的催化体系催化烷基异氰酸酯室温聚合,详细考察了催化剂组成以及聚合条件等对烷基异氰酸酯聚合的影响,并研究了己基异氰酸酯的聚合动力学．以La、Nd、Sm和Gd四种稀土元素为代表,合成了相应的Schiff碱配合物,结果表明轻稀土体系比重稀土体系好,La的聚合活性最高．在-40℃-40℃很宽的聚合温度范围内,可以得到分子量分布窄（MWD=1．50～2．40）的高分子量聚异氰酸酯,20℃为最佳的聚合温度．己基异氰酸酯的最佳聚合条件为：[AI]／[La]=30（摩尔比）,[n-HexNCO]／[La]=100,[n—HexNCO]=3．43mol／L,甲苯溶液中20℃聚合12h,聚合物收率74．0％,聚合物黏均分子量高达73．5×10^4,数均分子量40．2×10^4,MWD=1．79．聚合动力学研究表明己基异氰酸酯聚合反应对单体浓度和催化剂浓度都是一级关系,聚合反应活化能为43．64kJ／mol．     

Synthetic rubbers prepared by lanthanide coordination catalysts

China is rich in rare earth resources. Rare earth elements, also named lanthanides, are number 58 to number 81 elements in the elemental periodic table. They have unique electronic structures and may form various coordination compounds. In the early 1960s, researchers at the Changchun Institute of Applied Chemistry, Chinese Academy of Sciences (CIAC) found the catalytic activities of lanthanide compounds in stereospecific polymerization of conjugated dienes, and published the first paper on this topic in 19...     

The characteristics of lanthanide coordination catalysts and the cis-polydienes prepared therewith

The stereoregularity of polydienes is almost the same in regard to the individual elements of the lanthanide series, whereas the activity of the Ln catalysts in diene polymerization varies from one to the other within the series. The latter may be attributed to the difference in the number of electrons that occupy the 4f orbitals. It has been proved that the polymerization of dienes with Ln catalysts under certain conditions proceeds by a “living polymer” mechanism. With regard to the polymerization of butadiene, the most active catalyst is a Nd³⁺species a new binary system of NdCl₃-3ROH + AlR₃ has been discovered. The cis- 1,4 content in polybutadiene is about 97% and the 1,2 content, less than 1%. For the polymerization of isoprene with a Nd³⁺ catalyst system, the effects of ligand and alkyl groups in AIR₃ on cis-1,4 content (ca. 95%) in polyisoprene can be neglected. For the copolymerization of butadiene and isoprene, the cis-1,4 contents of these two monomeric units in the copolymer are greater than 95% the reactivity ratios r₁ and r₂ are determined. and the T_g's of the copolymers of various compositions deviate slightly from the calculated values for random copolymers. A linear relationship exists between the yield strength from the stress-strain curve of Ln-polvbutadiene and its [n] This relationship is verified by Ln-polyisoprene and natural rubber but different slopes are obtained     

Recent advances in the field of diolefin polymerization with transition metal catalysts

Recent advances in the field of catalysis for 1,3-diene polymerization and in the interpretation of the polymerization mechanism are examined. Catalysts prepared from methylaluminoxanes and soluble transition metal compounds are in general more active than the analogous systems prepared from AlR₃. With some catalysts, however, (e.g. lanthanide systems) a high activity is obtained only when transition metal compounds containing preformed metal-carbon bonds are used. Methylaluminoxanes affect also the stereospecificity of the polymerization. Active and stereospecific systems are obtained from monocyclopentadienyl derivatives of Ti and aluminoxanes. Recent views on the factors that determine stereospecificity are examined. Schemes are presented for the formation of iso- or syndiotactic polymers, with 1,2, cis-1,4 or trans-1,4 structure, from various dienes.     

苯乙烯在顺1,4-聚丁二烯上的接枝共聚反应动力学的Monte Carlo模拟

用ＭｏｎｔｅＣａｒｌｏ模拟方法对苯乙烯在顺１，４－聚丁二烯上的接枝反应动力学进行了研究。模拟结果表明，对于不同的橡胶浓度，接枝的和均聚的聚苯乙烯的数均聚合度、接枝效率与苯乙烯在顺１，４－聚丁二烯上的接枝共聚反应的动力学的解析解十分吻合，证明本方法能够有效地应用于自由基型接枝共聚合反应体系。     

π-烯丙基稀土配合物的合成、结构及其催化烯烃聚合反应机理的研究——Ⅱ.LiY(π-C_3H_5)_4·2.5D催化异戊二烯聚合反应机理的研究

<正> 在稀土配位共轭双烯烃聚合反应机理的研究中,一般认为按π-烯丙基机理进行,但迄今为止尚缺乏足够的实验证据。我们曾用~1H-NMR、一维~(13)C-NMR和二维~(13)C-NMR系统地研究了(CF_3COO)_2LnCl·EtoH-(i-Bu)_2AIH-共轭双烯烃(Ln=La、Pr、Nd、Sm、Tb、Ho、Sc和Y)均相聚合体系的聚合机理,提出了η~4-共轭双烯(顺式-反式-)和η~3-烯丙基(同式-对式-)机理。但由于广烯丙基稀土配合物稳定性差,难于合成,加之聚合体系中很难直接分离出π-烯丙基稀土配合物活性体,为此,至今尚未能用模型π-烯丙基稀土配合物对上述机理进行研究。我们已合成一系列π-烯丙基稀土配合物LiLn     

RING-OPENING POLYMERIZATION OF ε-CAPROLACTONE USING LANTHANIDE TRIS（N-PHENYL-3,5-DI-T-BUTYLSALICYLALDIMINATO）S AS SINGLE COMPONENT CATALYST

Ring-opening polymerization ofε-caprolactone has been carried out by using rare earth Schiff base complexes: lanthanide tris(N-pheny1-3,5-di-t-butylsalicylaldiminato)s[Ln(OPBS)_3]as single component catalyst for the first time.The influences of different rare earth elements,monomer and catalyst concentration as well as reaction time on the polymerization were investigated.Mechanism studies showed that monomer inserts into the active site with the acyl-oxygen bond scission rather than the break of alkyl-oxygen bond.     

RING-OPENING POLYMERIZATION OF ε-CAPROLACTONE USING LANTHANIDE TRIS(N-PHENYL-3,5-DI-T-BUTYLSALICYLALDIMINATO)S AS SINGLE COMPONENT CATALYST

Ring-opening polymerization of ε-caprolactone has been carried out by using rare earth Schiff base complexes:lanthanide tris(N-phenyl-3,5-di-t-butyisalicylaldiminato)s [Ln(OPBS)3]as single component catalyst for the first time.The influences of different rare earth elements,monomer and catalyst concentration as well as reaction time on the polymerization were investigated.Mechanism studies showed that monomer inserts into the active site with the acyl-oxygen bond scission rather than the break of alkyl-oxygen bond.     

稀土催化材料的制备、结构及催化性能

稀土催化材料的研究和发展为La和Ce等高丰度轻稀土元素的高质、高效利用提供了有效的途径.稀土元素具有未充满电子的4f轨道和镧系收缩等特征,作为催化剂的活性组分或载体使用时表现出独特的催化性能.本文从稀土氧化物、稀土复合氧化物、稀土-贵金属催化剂、稀土改性多孔催化材料等稀土催化材料出发,重点介绍和讨论了稀土的添加对催化剂的结构、活性和稳定性等的影响,阐述了稀土与过渡金属及氧化物、稀土与贵金属之间的相互作用,及对催化剂催化性能的影响.并对稀土催化材料的研究和发展提出了思考和展望.     

Highly cis-1,4 selective polymerization of dienes with homogeneous Ziegler-Natta catalysts based on NCN-pincer rare earth metal dichloride precursors

The first aryldiimine NCN-pincer ligated rare earth metal dichlorides (2,6-(2,6-C6H3R2N=CH)2-C6H3)LnCl2(THF)2 (Ln = Y, R = Me (1), Et (2), iPr (3); R = Et, Ln = La (4), Nd (5), Gd (6), Sm (7), Eu (8), Tb (9), Dy (10), Ho (11), Yb (12), Lu (13)) were successfully synthesized via transmetalation between 2,6-(2,6-C6H3-R2N=CH)2-C6H3Li and LnCl3(THF)(1-3.5). These complexes are isostructural monomers with two coordinating THF molecules, where the pincer ligand coordinates to the central metal ion in a kappaC:kappaN:kappaN' tridentate mode, adopting a meridional geometry. Complexes 1-6, 9-11, and 13 combined with aluminum tris(alkyl)s and [Ph3C][B(C6F5)4] established a homogeneous Ziegler-Natta catalyst system, which exhibited high activities and excellent cis-1,4 selectivities for the polymerizations of butadiene (T(p) = 25 degrees C, 99.9%; 0 degrees C, 100%) and isoprene (T(p) = 25 degrees C, 98.8%). Remarkably, such high cis-1,4 selectivity almost remained at elevated polymerization temperatures up to 80 degrees C and did not vary with the type of the central lanthanide element, however, which was influenced obviously by the ortho substituent of the N-aryl ring of the ligands and the bulkiness of the aluminum alkyls. The Ln-Al bimetallic cations were considered as the active species. These results shed new light on improving the catalytic performance of the conventional Ziegler-Natta catalysts for the specific selective polymerization of dienes.     

异戊二烯稀土催化聚合过程中配合物结构及其转化的~(13)C-NMR研究

本文用~(13)C-NMR研究了异戊二烯(IP)在均相催化剂(CF_3CO_2)_2LnCl·EtOH—(i-Bu)AlH—o-C_6D_4Cl_2作用下的聚合过程。单体首先被活化同稀土配位生成η~4-IP稀土配合物(反式和顺式),然后η~4-IP的C-3和C-4插入Ln-H键生成η~3-烯丙基稀土配合物——η~3-(2-甲基)丁烯基稀土配合物(同式和对式)。二维~(13)C-NMR交换谱表明η~4-IP和0η~3-烯丙基的每对异构体在常温下分别进行慢交换反应(互变异构),这一过程使插入反应在常温下得以进行。