Compounds of the [PMo12O40]3− anion with surfactant cations forming nanoperiodic structures

Phosphomolybdic acid forms compounds with surfactant cations in acid aqueous media (pH 1.0–2.5) to give compounds A₃[PMo₁₂O₄₀] or Etn₃[PMo₁₂O₄₀]₂·nEtnCl₂ (n=0−3) with various nanoperiodicity depending on the surfactant and synthesis conditions. L. V. Pisarzhevskii Institute of Physical Chemistry, National Academy of Sciences of Ukraine, 31 Prospekt Nauki, Kiev 252039, Ukraine. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 34, No. 3, 184–190, May–June, 1998.     

Thermal Study of the Ceramic Pigments CoxZn(7−x)Sb2O12

Using the Pechini method, pigments with spinel structure (Zn₇Sb₂O₁₂)were synthesized by substitution of the cation Zn²⁺ by Co²⁺, in compounds with different concentrations of Sb₂O₃. The doping resulted in Co_xZn_(7–x)Sb₂O₁₂ phases(x=1–7) that were isomorphs to spinel, denominated as samples A and B. After thermal treatment at 400°C for 1 h, the powders were characterized by thermogravimetry(TG) and differential thermal analysis (DTA). The results indicate a different behavior whena higher amount of Sb₂O₃ is used, due to the presence of a secondary phase (ilmenite). This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis, characterization and studies on the third-order optical non-linearities of novel charge-transfer heteropoly complexes (C8H12N2)5H7PMo12O40 and (C8H12N2)3H3PMo12O40·5H2O

Summary Two novel charge-transfer (CT) heteropoly complexes, (C₈H₁₂N₂)₅H₇PMo₁₂O₄₀ (1) and (C₈H₁₂N₂)₃H₃-PMo₁₂O₄₀·5H₂O (2), prepared by reacting p-Me₂NC₆H₄NH₂ with the four-electron heteropoly blue H₇PMo₁₂O₄₀·12H₂O and heteropoly acid H₃PMo₁₂O₄₀· xH₂O, respectively, were characterized by elemental analysis, and u.v., i.r., XPS and e.s.r. spectroscopies. A sizable electron-transfer interaction occurs within the product molecules and the heteropoly anions retain their Keggin structure. Their third-order optical non-linearity coefficients were measured using the Z-scan technique at a concentration of 4.68 × 10⁻⁶ mol dm⁻³ for (1) and 2.79 × 10⁻⁶ mol dm⁻³ for (2), with I ₀ = 2.38 × 10¹³ w m⁻² and λ = 532nm. The |χ⁽³⁾| for (1) is 2.61 × 10⁻¹⁰ esu and |χ⁽³⁾| for (2) is 1.05 × 10⁻¹⁰ esu.     

Synthesis and Characterization of a [Mn12O12(O2CR)16(H2O)4] Complex Bearing Paramagnetic Carboxylate Ligands. Use of a Modified Acid Replacement Synthetic Approach

Summary.  A new modified approach for the synthesis of Mn₁₂ clusters, based on the use of complex [Mn₁₂O₁₂(O₂C ^t Bu)₁₆(H₂O)₄] (2) as starting material to promote the acidic ligand replacement, is presented here. This new synthetic approach allowed us to obtain complex [Mn₁₂O₁₂(O₂CC₆H₄N(O^•) ^t Bu)₁₆(H₂O)₄] (3), whose preparation remained elusive by direct replacement of the acetate groups of Mn₁₂Ac (1). Complex 3 bearing open-shell radical units, was prepared to increase the total spin number of its ground state, and consequently, to increase T _B , with the expectation that the radical ligands may couple ferromagnetically with the Mn₁₂ core. Unfortunately, magnetic measurements of complex 3 revealed that the sixteen radical carboxylate ligands interact antiferromagnetically with the Mn₁₂ core to yield a S = 2 magnetic ground state. Corresponding author. E-mail: vecianaj@icmab.es Received March 27, 2002; accepted May 2, 2002     

Complexing of Pd(II) and Pt(II) by dithiooxamide immobilized on SiO2

It is shown that dithiooxamide immobilized on SiO₂ can bind Pd(II) and Pt(II) from aqueous chloride solutions by complexing. Values have been derived for the effective Pd(II) and Pt(II) sorption constants for dithiooxamide immobilized on SiO₂, which represent stronger binding of Pd(II) than Pt(II). L. V. Pisarzhevskii Institute of Physical Chemistry, National Academy of Sciences of Ukraine, 31 Prospekt Nauki, Kiev 252039, Ukraine. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 34, No. 6, pp. 366–370, November–December, 1998.     

Synthesis,characterization, and electrochemical properties of new water-soluble Mn12O12(O2CR)16(H2O)4 clusters

Abstract

We report our attempts to produce water-soluble Mn clusters of the type [Mn₁₂O₁₂(O₂CR)₁₆(H₂O)₄] and the synthesis, spectroscopic, structural, and electrochemical characterization of the three new compounds that were obtained. Clusters 2, 3, and 4 were prepared via substitution of the acetate ligands in [Mn₁₂O₁₂(O₂CMe)₁₆(H₂O)₄] (1) with either 3,4-diaminobenzoic acid, L-proline or L-ascorbic acid, respectively, which are all inexpensive and readily available. Clusters 2, 3, and 4 were characterized by elemental analysis, UV-Vis, and FTIR spectroscopies, XPS, MS, and XRD analysis, suggesting that the clusters retain their structure during the substitution reaction, albeit 4 was obtained partially substituted and reduced. Electrochemical measurements in acetate buffer at pH 6, including continuous cyclic voltammetry scans of the free ligands and of the clusters, imply that 4 is stable to the oxidation process, while in 2 the primary amine ligands are oxidized rapidly, leading to precipitation of the cluster. Overall, the voltammetric measurements support the spectroscopic-based proposed structures.     

[Mn12O12(O2CMe)12(NO3)4(H2O)4]: facile synthesis of a new type of Mn12 complex

The title dodecanuclear Mn complex, namely dodeca‐μ₂‐acetato‐κ²⁴O:O′‐tetraaquatetra‐μ₂‐nitrato‐κ⁸O:O′‐tetra‐μ₄‐oxido‐octa‐μ₃‐oxido‐tetramanganese(IV)octamanganese(III) nitromethane tetrasolvate, [Mn₁₂(CH₃COO)₁₂(NO₃)₄O₁₂(H₂O)₄]·4CH₃NO₂, was synthesized by the reaction of Mn²⁺ and Ce⁴⁺ sources in nitromethane with an excess of acetic acid. This compound is distinct from the previously known single‐molecule magnet [Mn₁₂O₁₂(O₂CMe)₁₆(H₂O)₄], synthesized by Lis [Acta Cryst. (1980), B 36 , 2042–2044]. It is the first Mn₁₂‐type molecule containing nitrate ligands to be directly synthesized without the use of a preformed cluster. Additionally, this molecule is distinct from all other known Mn₁₂ complexes due to intermolecular hydrogen bonds between the nitrate and water ligands, which give rise to a three‐dimensional network. The complex is compared to other known Mn₁₂ molecules in terms of its structural parameters and symmetry.     

Identification of Saturating Solid Phases in the System Ce2(SO4)3-H2O from the Solubility Data

Saturating solid phases, Ce₂(SO₄)₃·hH₂O, with hydrate numbers h equal to 12, 9, 8, 5, 4 and 2, have been identified by critical evaluation of the solubility data in the system Ce₂(SO₄)₃—H₂O over the temperature range 273–373 K. The results are compared with the respective TG—DTA—DSC and X-ray data. The solubility smoothing equations, transition points and solution enthalpy estimators of the identified hydrates are given. The stable equilibrium solid phases are concluded to be only Ce₂(SO₄)₃·9H₂O at 273–310 K, Ce₂(SO₄)₃·4H₂O at 310–367 K and Ce₂(SO₄)₃·2H₂O at 367–373 K. Divergencies of up to 185% in the reported solubility data are mainly due to a variety of metastable equilibria involved in the close crystallization fields, and incorrect assignments of the saturating solid phases. Since a similar variety of the hydrate numbers exists for the analogous La(III) system, it most probably also occurs for the corresponding Pu(III), Np(III) and U(III) systems. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal Study of A2O–(MoO3)2–P2O5 (A=Li, Na) Glasses

Alkali phosphomolybdate glasses have been prepared by quenching melted mixtures of P₂O₅, MoO₃ and A₂O(A=Li, Na). The composition dependence of the transition temperature of glasses belonging to ternary A₂O–(MoO₃)₂–P₂O₅ (A=Li, Na) systems is studied for several series of glasses corresponding to either a fixed A₂O rate or a constant Mo/P ratio. The interpretation of the results is based on the presence of different types of molybdenum and phosphorous structural groups and P–O–M (M=P, Mo) linkages in glasses. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis,Spectra and Electrochemistry of Dinitro-bis-{1-alkyl-2-(arylazo) imidazole} Ruthenium(II). Nitro-nitroso Derivatives and Reactivity of the Electrophilic {Ru-NO}<Superscript>6</Superscript>System

Ag⁺ assisted aquation of blue cis-trans-cis-RuCl₂(RaaiR′)₂ (4–6) leads to the synthesis of solvento species, blue-violet cis-trans-cis-[Ru(OH₂)₂(RaaiR′)₂](ClO₄)₂ [Raai R′=p-R-C₆H₄ N=N–C₃H₂–NN–1–R′, (1–3), abbreviated as N,N′-chelator, where N(imidazole) and N(azo) represent N and N′, respectively; R = H (a), OMe (b), NO₂ (c) and R′ = Me (1/4/7/10), CH₂CH₃ (2/5/8/11), CH₂Ph (3/6/9/12)] that have been reacted with NO₂⁻in warm EtOH resulting in violet dinitro complexes of the type, Ru(NO₂)₂(RaaiR′)₂ (7–9). The nitrite complexes are useful synthons of electrophilic nitrosyls, and on triturating the compounds, (7b–9b) with conc. HClO₄ nitro-nitrosyl derivatives, [Ru(NO₂)(NO)(OMeaaiR′)₂](ClO₄)₂ (10b–12b) are isolated. The solution structure and stereoretentive transformation in each step have been established from ¹H n.m.r. results. All the complexes exhibit strong MLCT transitions in the visible region. They are redox active and display one metal-centred oxidation and successive ligand-based reductions. The redox potentials of Ru(III)/Ru(II) (E_1/2^M) of (10b–12b) are anodically shifted by ∼ ∼0.2 V as compared to those of dinitro precursors, (7b–9b). The ν(NO) >1900 cm⁻¹ strongly suggests the presence of linear Ru–NO bonding. The electrophilic behaviour of metal bound nitrosyl has been proved in one case (12b) by reacting with a bicyclic ketone, camphor, containing an active methylene group and an arylhydrazone with an active methine group, and the heteroleptic tris chelates thus formed have been characterised.     

Thermochemistry of rare earth complexes [Ln(Ala)2(Im)(H2O)](ClO4)3 (Ln=Pr, Gd)

The two complexes, [Ln(Ala)₂(Im)(H₂O)](ClO₄)₃ (Ln=Pr, Gd), were synthesized and characterized. Using a solution-reaction isoperibol calorimeter, standard enthalpies of reaction of two reactions: LnCl₃⋅6H₂O(s)+2Ala(s)+Im(s)+3NaClO₄(s)=[Ln(Ala)₂(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l) (Ln=Pr, Gd), at T=298.15 K, were determined to be (39.26±0.10) and (5.33±0.12) kJ mol^–1 , respectively. Standard enthalpies of formation of the two complexes at T=298.15 K, Δ_fH^Θ_m {[Ln(Ala)₂(Im)(H₂O)](ClO₄)₃(s)} (Ln=Pr, Gd), were calculated as –(2424.2±3.3) and –(2443.4±3.3) kJ mol^–1 , respectively.     

Different orientations of C=O versus P=O in P(O)NHC(O) skeleton: the first study on an aliphatic diazaphosphorinane with a gauche orientation

Different orientations of P(O) versus C(O) in P(O)NHC(O) skeleton have been discussed in two new phosphorus(V)-nitrogen compounds with formula XP(O)Y and XP(O)Z₂ where X = NHC(O)C₆H₄(4-F) and Y = NHCH₂C(CH₃)₂CH₂NH (1), Z = NHC₆H₄(4-CH₃) (2). Compound 1 is the first example of an aliphatic diazaphosphorinane with a gauche orientation which has been studied by X-ray crystallography; the P=O bond is in the equatorial position of the ring. Both compounds show ⁿ J(F,C) and ^m J(F,H) coupling constants (n = 1, 2, 3 and 4; m = 3 and 4) and ³ J(P,C) > ² J(P,C). Quantum chemical calculations were performed with HF and Density Functional Theory (DFT) methods using 6−31+G(d,p) basis set. A tentative assignment of the observed vibrational bands for these molecules is discussed. Compound 1 shows a deshielded C atom of the carbonyl moiety (in ¹³C NMR spectrum) relative to that of 2, which is supported by IR spectroscopy in which the considerably lower C=O frequency is observed for 1. Comparing the X-ray crystallography and IR spectra of 1 and 2 shows that the acyclic compound 2, containing P=O and C=O bonds in an anti position, are involving in a stronger N–H···O=P hydrogen bond in crystal network. This leads to a weaker P=O and N_C(O)NHP(O)–H bonds and stronger N···O interaction. The N_amide–H is involved in an intramolecular N–H···O hydrogen bond.     

Synthesis of O,O Ethane Bridged Bis-copper(II) Macrocycles. Selective Enzyme Model for Catecholase Activity

New mononuclear and dinuclear complexes [3-hydroxyethyl-1,3,5,8,11pentaazacyclotridecane]copper(II) (1)/nickel(II) (2) perchlorate and O,O ethane bridged bis-copper(II) (3)/nickel(II) (4) macrocycles have been synthesized and characterized by various spectroscopic techniques, viz. i.r., n.m.r., e.p.r., u.v.–vis. and conductance measurements. Spectral data and conductance measurements reveal that all the complexes are consistent with square-planar geometry and are ionic in nature. The catalytic activity of the dinuclear Cu(II) complex (3) in the presence of pyrocatechol was determined spectrometrically by monitoring the increase of the o-benzoquinone characteristic absorption band at 25,000 cm⁻¹ with respect to time in DMF saturated with molecular oxygen. The kinetic parameters V_max (2.8×10⁻³ M s⁻¹) and K_M (1.4×10⁻³ mm) have been determined by Michaelis–Menten method. Electrochemistry of the dinuclear Cu(II) complex has been studied in the presence of molecular oxygen with pyrocatechol and without pyrocatechol at a scan rate of 0.1 V s⁻¹ by cyclic voltammetry. On addition of pyrocatechol, complex shows a shift in E_pc, E_pa and E_1/2 values indicating the oxidation of substrate (pyrocatechol).     

Bond covalency and electronic structure of CaB2O4(III) crystal

The electronic structure of CaB₂O₄(III) crystal obtained by using SIESTA program is reported in this article. It is observed that the band gap values are, respectively, 5.39 and 5.89 eV from our LDA and GGA calculations. The bond covalency and bond valence are calculated with a simplified method. For both Ca–O and B–O types of bond, the bond covalency has a decreasing trend with the increasing bond length. The result of bond covalency in explaining the interaction between atoms has been shown in good agreement with that of Mulliken population analysis. The ionic configuration for CaB₂O₄(III) in the fundamental state is estimated to be Ca^+1.808B^−0.68O^−0.112. A summary of B–O distances for the four phases of CaB₂O₄ crystal from several works is also presented.     

Molecular structure of tris(acetylacetonato)scandium Sc(C5H7O2)3

Molecular structure of tris(acetylacetonato)scandium, Sc(C₅H₇O₂)₃, is investigated by gas-phase electron diffractometry. The main structural parameters of the molecule are evaluated. The average internuclear distances and angles correspond to C₃ symmetry. The chief structural motif is trigonal antiprisms of six oxygen, carbon, and hydrogen atoms with a scandium atom at the center. It is found that r_g(Sc-O) = 204.1(8) pm and r_g(C-O) = 124.7(4) pm. Translated fromZhumal Strukturnoi Khimii, Vol. 39, No. 4, pp. 633–639, July–August, 1998.     

Thermochemistry of europium and dithiocarbamate complex Eu(C5H8NS2)3(C12H8N2)

A solid complex Eu(C₅H₈NS₂)₃(C₁₂H₈N₂) has been obtained from reaction of hydrous europium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen⋅H₂O) in absolute ethanol. IR spectrum of the complex indicated that Eu³⁺ in the complex coordinated with sulfur atoms from the APDC and nitrogen atoms from the o-phen. TG-DTG investigation provided the evidence that the title complex was decomposed into EuS. The enthalpy change of the reaction of formation of the complex in ethanol, Δ_r H _m ^θ(l), as –22.214±0.081 kJ mol^–1, and the molar heat capacity of the complex, c _m, as 61.676±0.651 J mol^–1 K^–1, at 298.15 K were determined by an RD-496 III type microcalorimeter. The enthalpy change of the reaction of formation of the complex in solid, Δ_r H _m ^θ(s), was calculated as 54.527±0.314 kJ mol^–1 through a thermochemistry cycle. Based on the thermodynamics and kinetics on the reaction of formation of the complex in ethanol at different temperatures, fundamental parameters, including the activation enthalpy (ΔH _≠ ^θ), the activation entropy (ΔS _≠ ^θ), the activation free energy (ΔG _≠ ^θ), the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A) and the reaction order (n), were obtained. The constant-volume combustion energy of the complex, Δ_c U, was determined as –16937.88±9.79 kJ mol^–1 by an RBC-II type rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_c H _m ^θ, and standard enthalpy of formation, Δ_f H _m ^θ, were calculated to be –16953.37±9.79 and –1708.23±10.69 kJ mol^–1, respectively.     

[CoII4MoV12O28(OH)12(H2O)12]·12H2O: facilitating single‐crystal growth by deuteration

The structure of the neutral heterometal oxide cluster dodecaaqua‐di‐μ₃‐hydroxido‐deca‐μ₂‐hydroxido‐octacosaoxidotetracobalt(II)dodecamolybdenum(V) dodecahydrate, [Mo₁₂O₂₈(μ₂‐OH)₁₀(μ₃‐OH)₂{Co(H₂O)₃}₄], is virtually identical to the previously reported Ni^II analogue [Mo₁₂O₂₈(μ₂‐OH)₁₀(μ₃‐OH)₂{Ni^II(H₂O)₃}₄] [Müller, Beugholt, Kögerler, Bögge, Budko & Luban (2000). Inorg. Chem. 39 , 5176–5177], the first molecular magnet to exhibit signs of magnetostriction. The formation kinetics of the neutral cluster species, which is insoluble in water, can be significantly slowed by the use of deuterated reactants in order to grow single crystals of sufficient size for single‐crystal X‐ray diffraction studies using standard diffractometers. One half of the main cluster and six solvent water molecules constitute the asymmetric unit. The main cluster is located on a mirror plane.     

Reaction of 2-methyl-3-morpholino-1-phenylprop-2-en-1-one with Ru3(CO)12

The reaction of Ru₃(CO)₁₂ with 2-methyl-3-morpholino-1-phenylprop-2-en-1-one (1) produced the Ru₆(CO)₁₆(μ₄-η¹:η¹:η²:η²-PhC(O)-C(Me)=C)₂ (2), Ru₂O₂(CO)₄(η³-OC(Ph)C(Me)C(H)C(Me)₂C(Ph))₂ (3), and [Ru(CO)₂(PhCO₂)(O(CH₂-CH₂)₂NH]₂ (4) complexes, which were characterized by IR and NMR spectroscopy. The structures of the complexes were established by X-ray diffraction. The formation of the complexes is accompanied by deamination of ligand 1. Complexes 2 and 3 bearing the vinyl ketone groups contain five-membered oxaruthenacycles and dihydropyran rings. Morpholine is not removed from the reaction mixture and leads to the formation of complex 4. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2063–2068, December, 2006.     

Addition of CCl4 to unsaturated compounds catalyzed by M3(CO)12 (M=Fe, Ru, Os)

The addition of CCl₄ to hex-1-ene and to the methyl ester ofN-(trans-cinnamoyl)-l-proline (2) catalyzed by M₃(CO)₁₂ or by the M₃(CO)₁₂+DMF system (M=Fe, Ru, Os) was studied. The use of ruthenium and osmium dodecacarbonyls in combination with DMF increases the yields of adducts CCl₃CH₂CHClC₄H₉ (4) and PhCHClCH(CCl₃)C(O)R′ (3) over those obtained in reactions catalyzed by the same carbonyls without DMF. In addition to adduct3, salts [M(CO₃)Cl₃]⁻[Me₂NH₂]⁺ were isolated from the products of the reaction between CCl₄ and1 in the presence of M₃(CO)₁₂+DMF (M=Ru, Os). These salts do not catalyze this reaction and apparently result from chain termination. Experimental results in favor of a coordination mechanism of the addition of CCl₄ to olefins in the presence of Ru₃(CO)₁₂ and Os₃(CO)₁₂ were obtained. Translated fromIzvestiya Akademii Nauk Seriya Khimicheskaya, No. 6, pp. 1174–1179, June, 1997.     

Synthesis,structures and magnetic properties of three metal-organic frameworks containing manganese(II)

Two new Mn(II) coordination polymers formed with molecular formula [Mn(H₂O)₂(HBTC)·(H₂O)] 1 and [Mn(H₂O)₂(4,4′bipy)(HBTC)₂]·(H4,4′bipy)₂ 2, where BTC = 1,2,4-benzenetricarboxylate and 4,4′bipy = 4,4′bipydine, have been synthesized via hydrothermal approach and characterized by single crystal X-ray diffraction techniques. 1 is composed of Mn–H₂O–Mn 1D chains and further the chains are linked by HBTC ligands to form a 2D network in the ab plane; 2 is constructed by Mn–4,4′bipy–Mn 1D chains along the b direction with Mn²⁺ ions coordinated to H₂BTC and water as terminal ligands to form a 2D network. We also prepared a third compound with the molecular formula of [Mn(H₂O)(HBTC)·(H₂O)] which has been recently structurally reported elsewhere. The magnetic properties of the three compounds have been studied in detail under variable temperatures.