Conformational isomerism of 1-butene secondary ozonide as studied by means of matrix isolation infrared absorption spectroscopy

Theoretical calculations of structures, stability and vibrational spectra of 1-butene secondary ozonide (SOZ) conformers were performed using DFT method B3LYP with a 6-311++G(3df, 3pd) basis set. The calculations predict six staggered structures of 1-butene SOZ. The FTIR spectra of 1-butene SOZ isolated in Ar, N₂ and Xe matrices were recorded. It was found that nitrogen is the best suited for the matrix isolation of 1-butene SOZ. The bandwidth of the spectral bands of the ozonide isolated in nitrogen was as narrow as 2 cm⁻¹. For the first time the existence of five conformers of 1-butene SOZ were confirmed experimentally by means of matrix isolation infrared absorption spectroscopy. The equatorial gauche (∠OCCC=−66.1°) conformer was proved theoretically and experimentally to be the most stable. It was found that due to high potential barriers of the conformational transitions annealing of the matrix is useless for the assignment of spectral bands to various conformers of 1-butene SOZ. Using the hot nozzle technique the van’t Hoff experimental plots were made for three additional conformers of 1-butene SOZ and experimental ΔH values for these additional conformers were established. The crystallization problems of 1-butene SOZ are discussed which accounts for the rich conformational diversity of the ozonide as well as high conformational barriers for axial-equatorial transitions.      

Alkylation of ambident indole anion in ionic liquids

Alkylation of indole salts in different ionic liquids is reported. Ionic liquids increase the alkylation reaction rate of ambident indole anion and reduce the effects of counter ions and/or additives, the alkylation reaction rates being independent of the presence of small amounts of protic solvents or water.      

Aminophosphine complex as a catalyst precursor in Suzuki coupling reactions

A palladium complex with an aminophosphine ligand has been prepared and investigated as a catalyst precursor in Suzuki coupling reactions in toluene. Nanoparticles composed of elemental palladium have been isolated from the reaction media and analyzed using transmission electroscopic microscope (TEM), which shows the essential catalysts palladium nanoparticles to have a size of ca. 3.0 nm. dedicate to the 60th birthday of Prof. Dr. Yuan Kou     

Ugi products containing boronate esters

The Ugi reaction with formylphenylboronic acid derivatives as the carbonyl component proceeds to give the corresponding boron-containing dipeptide derivatives (Ugi products) in good yields.      

Palladium-catalyzed amination of quinaldine-5-triflate

Palladium-catalyzed amination reactions of quinoline triflate and the effect of a Pd catalyst, its ligands, solvents, bases, and temperature were studied. This method facilitated an easier pathway for the preparation of aminoquinoline derivatives as potential precursors of new serotoninerg agents.      

Low temperature synthesis and characterization of Mn3O4 nanoparticles

Heating hydrous manganese (II) hydroxide gel at 85 °C for 12 hours produces Mn₃O₄ nanoparticles. They were characterized by X-ray powder diffraction (XRD) and infrared spectroscopy (FTIR). The particle size estimated from the SEM and X-ray peak broadening is approximately 32 nm, showing them to be nanocrystalline. EPR measurements confirm a typical Mn²⁺signal with a highly resolved hyperfine structure.      

Polyaniline-polypyrrole coating for solid phase microextraction

A procedure for direct electrochemical deposition of polyaniline-polypyrrole blend coating on the surface of stainless steel wire was suggested. Incorporation of polyaniline and polypyrrole into the blend coating was confirmed by infrared spectroscopy. Key parameters (pyrrole, aniline, dopant and sulphuric acid concentrations and deposition potential) influencing the coating’s mechanical stability and surface homogeneity were optimised and thermostability of the coating was investigated. A possibility to apply the coating as a new fibre for solid phase microextraction was demonstrated. The coating showed better selectivity toward aromatic, hydrophobic compounds.      

Analysis of vibratinal spectra of 8-hydroxyquinoline and its 5,7-dichloro, 5,7-dibromo, 5,7-diiodo and 5,7-dinitro derivatives based on density functional theory calculations

The geometry, frequency and intensity of the vibrational bands of 8-hydroxyquinoline and its 5,7-dichloro, 5,7-dibromo, 5,7-diiodo and 5,7-dinitro derivatives were obtained by the density functional theory (DFT) calculations with Becke3-Lee-Parr (B3LYP) functional and 6-31G* basis set. The effects of chloride, bromide, iodide and nitro substituent on the vibrational frequencies of 8-hydroxyquinoline have been investigated. The assignments have been proposed with aid of the results of normal coordinate analysis. The observed and calculated spectra are found to be in good agreement.      

Esterification of palmitic acid with epichlorohydrin on anion exchange resin catalyst

The esterification reaction of palmitic acid with epichlorohydrin catalyzed by an anionic macroporous resin was studied. Purolite A-500 resin proved to be a very effective catalyst in the synthesis of 3-chloro-2-hydroxypropyl palmitate. The effects of certain parameters such as speed of agitation, catalyst particle size, catalyst loading, temperature, initial molar ratio between reactants on the rate of reaction were studied. It was found that the overall rate is intrinsically kinetically controlled. The structure of synthesized ester was confirmed by FTIR and ¹H NMR analyses.      

Influence of surfactants on the fading of malachite green

The kinetics of the reaction between malachite green (MG) and sodium hydroxide (MG fading) was studied using a spectrophotometric method in the presence of two cationic surfactants, cetyl-benzyl-dimethyl-ammonium chloride (CBDAC) and hexadecyl-trimethylammonium bromide (HTAB) and one anionic surfactant, sodium dodecyl sulphate (SDS) at concentrations below and above critical micellar concentrations. The cationic surfactants have a catalytic effect, while the anionic surfactant has an inhibitory effect on the reaction. A kinetic model describing the influence of surfactant on reaction rate was developed. The results are discussed on the basis of electrostatic and hydrophobic interactions between the kinetic micelles and malachite green.      

Surface analysis of the size-fractioned urban aerosols by secondary ion mass spectrometry (ToF-SIMS)

The secondary ion mass spectrometry method (ToF-SIMS) has been applied to the analysis of some mineral and organic species on the surface layers of airborne urban particulates. Particulate matter was collected on aluminum sheets of the 8-stage Anderson type cascade impactor from three different sampling sites in the city of Lodz, Poland, which were different in terms of aerosol source apportionment. The obtained results show that vehicle combustion products occur mainly in fine fraction with aerodynamic diameters below 1μm. The main contribution to the mineral components comes from direct and traffic related soil resuspension.      

Ionic liquid-functionalized SBA-15 mesoporous material: efficient heterogeneous catalyst in versatile organic reactions

Ionic liquid-functionalized mesoporous materials exhibited high catalytic activity in versatile organic reactions, such as cycloaddition of carbon dioxide (CO₂) with epoxide, aza-Michael addition of amines to α, β-unsaturated carbonyl compounds, and the Biginelli reaction of aldehyde, ethyl acetoacetate and urea. Recycling of the catalyst in these reactions could be carried out and the catalyst used at least five times without significant loss in activity.      

Review of analytical methods for the determination of chlorine dioxide

The present study reviews more than twenty years (1985-present) of published research on the development and application of analytical procedures for the determination of chlorine dioxide, a widely used disinfectant and bleaching agent. The review covers a variety of techniques including batch and automated spectrophotometry and fluorimetry, electroanalysis and chromatography. The analytical figures of merit to the methods are presented, while critical discussion regarding their advantages and disadvantages is addressed.      

Sub-millivolt amplitude potential oscillations observed in the noise of hydrogen evolution on Ag and Cu microelectrodes

A strange effect was observed while using the method of quasi-simultaneous determination of electrochemical voltage noise and impedance to obtain information on the kinetics of the hydrogen evolution reaction on Ag and Cu microelectrodes. Beyond a certain polarizing current density we found microvolt-amplitude potential oscillations on both electrodes with a frequency in the 5 Hz–5 kHz range. The oscillations were observed in every single experiment with Ag and Cu, while no oscillatory behavior was observed during the control experiments with the Pt microelectrode. The presence of the oscillations indicates that the mechanism of hydrogen evolution is more complex compared to the original assumption.      

Synthesis and pharmacological properties of 3-(2-methyl-furan-3-yl)-4-substituted-Δ<Superscript>2</Superscript>-1,2,4-triazoline-5-thiones

By the reaction of 2-methyl-furan-3-carboxylic acid hydrazide with isothiocyanates, 1-[(2-methyl-furan-3-yl)carbonyl]-4-substituted thiosemicarbazides 1 were obtained. Further cyclization with 2% NaOH led to the formation of 3-(2-methyl-furan-3-yl)-4-substituted-Δ²-1,2,4-triazoline-5-thiones 2. The pharmacological effects of 2 on the central nervous system in mice were investigated. Strong antinociceptive properties of the investigated derivatives were observed in a wide range of doses.      

Indirect determination of lutetium by differential pulse anodic stripping voltammetry at a hanging mercury drop electrode

Lutetium has been determined by differential pulse anodic stripping voltammetry in an acidic solution containing Zn-EDTA. Lutetium (III) ions liberated zinc (II), which was preconcentrated on a hanging mercury drop electrode and stripped anodically, resulting in peak current linearly dependent on lutetium (III) concentration. Less than 0.4 ng mL⁻¹ lutetium could be detected after a 2 min deposition.      

Thermal synthesis and characterization of Al χ La1-χ P3O9

New binary lanthanum-aluminum triphosphates were synthesized by thermal-condensation method from H₃PO₄, La₂O₃ and Al(OH)₃. These pigments could be potentially used as special inorganic pigments; their corrosion-inhibition properties were widely studied. Synthesis conditions were determined on the basis of DTA and TG measurements. The products were also characterized by X-ray diffraction analysis. Physical properties — density by pycnometric method, particle size distribution, oil number and critical pigment volume concentration (CPVC), pH and specific conductivity of their aqueous extracts were also determined.      

Simple method for calculating time dependence of individual radionuclide activities in decay series

A rapid method for calculating the time dependence of activities of individual radionuclides in genetically coupled decay series has been proposed. The method is based on the mathematical procedure, in which the matrix method is used for calculating a set of decay equations given in the vector form. The developed method is computerized and uses the modern Scilab software. This simple method eliminates certain drawbacks of older methods used previously for this purpose and is applicable to even solve calculations which are not easily treatable with the older methods. Some practical examples of such calculations are presented. Moreover, the new method is universal and it also enables a more general approach to the problem of the calculation of decay series in nuclear chemistry.      

Metathesis transformations of unsaturated derivatives of β-diketones

Selected β-diketones bearing unsaturated derivatives have been demonstrated to undergo homo-metathesis and cross-metathesis with selected olefins in the presence of Grubbs catalysts. The reactions led to respective homo- and cross-metathesis products mainly with good yields and selectivities.