Realization and properties of ramp-type YBa2Cu3O7−δ/Au/Nb junctions

All-thin-film ramp type Josephson junctions between YBa₂Cu₃O_7−δ and Nb have been fabricated. This procedure allows connections between high-T_c and low-T_c superconductors at different crystal sides of the high-T_c superconductor on one chip, which is of great interest for novel phase devices. A thin Au layer is incorporated as a chemical barrier to avoid oxygen transfer from the YBa₂Cu₃O_7−δ to the Nb. Critical current densities up to 600 A/cm² are obtained at T=4.2 K, with typical R_nA values of 0.8 μΩ cm². The variation of the magnetic field dependence of the critical current with the angle between the junction barrier and the YBa₂Cu₃O_7−δ crystal axes is explained by considering a predominant d_x²−y² order parameter symmetry of the YBa₂Cu₃O_7−δ. The successful fabrication of these junctions allows the implementation of novel superconducting electronics, such as complementary Josephson circuitry or proposed qubit concepts, using the unconventional order parameter symmetry of the high-T_c superconductor.     

Transient creep of YBa2Cu3O7−x superconductor

Rapid changes of oxygen partial pressure (P_O2) between 10³ and 2.1×10⁴ Pa have been carried out during steady-state plastic deformation of polycrystalline YBa₂Cu₃O_7−x (YBCO) at temperatures between 825 and 900°C. Transient creep was observed after such P_O2 changes. The analysis of these creep transients allowed the determination of the chemical diffusion coefficient for reequilibration, which is identical to that found from thermogravimetry and electrical conductivity experiments for oxygen vacancies.     

Oxygen overdoping in superconducting and non-superconducting Y1−xPrxBa2Cu3Oy

We present the evolution of magnetic and structural properties of Y_1−xPr_xBa₂Cu₃O_y (x0.5 and x=1) single crystals and polycrystalline materials when the oxygen concentration y is varied from under- to overdoping. We have found a monotonous evolution of the Pr Néel temperature for x=1 samples and a maximum of the superconducting critical temperature for the x0.5 samples. The structural properties as detected by X-ray diffraction and Raman spectroscopy show no instabilities when crossing the optimal doping region as was found in the x=0 material.     

Properties of YBa2Cu3O7−δ/YBa2CoxCu3−xOy/YBa2Cu3O7−δ Josephson edge junctions with 0.1 x 0.3 and the effect of flux flow on their normal resistance

YBa₂Cu₃O_7−δ (YBCO) based SNS edge junctions with cobalt doped YBCO barriers were prepared and characterized. At 77 K, good junctions had RSJ-like I–V curves with excess current, magnetic suppression of I_c of about 50% or more, and clear microwave steps. The conductance values 1/R_N at 77 K of junctions with different barrier thickness and composition, were proportional to the junction areas A, but show little correlation with the thickness of the barriers t_B in the range of 15t_B100nm. The corresponding I_cR_N products were observed to scale as J^0.66±0.09_c, similar to what was found by others. At the same time, the measured values of R_N are much smaller than what is expected based on the dimensions of the junction and the resistivity of the barrier material. To explain all of this, we propose a model in which at high supercurrent densities, flux flow of Josephson vortices in the junction leads to R_N values which are lower than expected. This model predicts

Full-size image (1K)

, which fits the observed results very well.     

Crystal structure of YBa2Cu3O7−x thin films prepared by pulsed laser deposition with substrate bias voltage

The crystal structure of YBa₂Cu₃O_7−x thin films has been investigated by cross-section transmission electron microscopy. The samples were deposited on MgO (100) substrates at 670°C with substrate bias voltages of ±300 V. For the unbiased case, c-axis, a-axis and (103) oriented domains normal to the substrate surface were observed. In this film, the c-axis oriented domains are dominant, but the crystal often exhibits a longer c-lattice constant than that of the YBa₂Cu₃O_7−x system, so extra cationic layers are inserted in the YBa₂Cu₃O_7−x intrinsic stacking sequence. For the case of −300 V, rotated domains were dominant in the entire film; however, c-axis oriented domains also grow from the substrate surface. Small-angle semicoherent grain boundaries between them were observed. In the case of +300 V, all the grains show c-axis oriented YBa₂Cu₃O_7−x. The degree of preferential orientation of the grains is reduced at negative bias voltage of −300 V and the structure defects are reduced by applying a positive bias of +300 V.     

Hole density and Tc behaviour in YBa2Cu3O7 − x

The behaviour of the hole number in YBCO systems as a function of the oxygen deficiency x is studied theoretically by calculating the density of electron states for several different superstructures formed by periodic arrangements of the oxygen vacancies. The characteristic features of the electronic properties for chain copper sites with different coordination are pointed out and their relevance in determining the number of carriers for oxygen planes is illustrated. It is shown that the curve of the hole number as a function of x shows plateaus and jumps similar to those found in the T_c versus x curves if the de-oxygenation process takes place by forming fragmented chains. Structures formed by filled and empty chains only give a smooth hole behaviour as a function of the composition. The results of the numerical calculations can be understood by a simple model giving the Fermi energy shift in terms of the concentrations of Cu(1) sites with different coordination.     

AC and DC magnetic studies of critical currents in ceramics of the Ho1−xPrxBa2Cu3O7−δ system

AC magnetic susceptibility measurements were performed for ceramics of the Ho_1−xPr_xBa₂Cu₃O_7−δ system as a function of temperature, frequency, field amplitude and static magnetic field. From the measurements, temperature dependences of intergranular critical currents and corresponding pinning energies at grain boundaries were determined for different Pr concentrations. These critical currents strongly decrease with Pr doping. They are limited by superconductor–insulator–superconductor or superconductor–normal metal–superconductor junctions and for higher Pr concentrations additionally suppressed by flux creep. Also intragranular critical current at 4.3 K was determined as a function of Pr concentration from magnetic hysteresis loops. It is a monotonically decreasing function of Pr doping.     

Phonon Raman scattering in Nd1+xBa2−xCu3O7−δ and Pr1+xBa2−xCu3O7−δ single crystals

The polarized Raman spectra of Nd_1+xBa_2−xCu₃O_7−δ (−0.023≤x≤0.107) and Pr_1+xBa_2−xCu₃O_7−δ (0.01≤x≤0.15) single crystals have been investigated. It was found that the Cu(2) A_g mode softens by 6 cm⁻¹ in Nd 1:2:3 and 4 cm⁻¹ in Pr 1:2:3 as x increases. These frequency shifts cannot be explained by the change in the relevant bond lengths due to Nd(Pr)-substitution for Ba. The variations with x of the two low frequency modes may be affected by change of their hybridization and/or change of their force constants. The linewidths of Ba mode in Pr 1:2:3 are broader than those in Y 1:2:3. This result suggests that the Pr substitution on Ba sites occurred even in a very small value of x. In x(yy) geometry the relative intensity of the Ba and O(4) modes in Nd 1:2:3 is greater than those in Pr 1:2:3. The difference between Nd 1:2:3 and Pr 1:2:3 in the relative intensity of the Ba and O(4) modes may be produced by the chains.     

Ramans study of Y1−xPrxBa2Cu3O7−δ and YB2Cu3−xZnxO7−δ single crystals

Single crystals with known T_c values of Y_1−xPr_xBa₂Cu₃O_7−δ (Y---Pr1:2:3) and YBa₂Cu_3−xZn_3−xZn_xO_7−δ (Y---Zn1:2:3) systems are studied by Raman measurements. The Raman spectra for (Y---Pr1:2:3) single crystals show that the frequencies of Ba and O_z modes increase as the Pr content increases. The results are consistent with the hole-localization scheme proposed for the suppression of superconductivity in the polycrystalline Y---Pr1:2:3 systems. On the other hand, in the Y---Zn1:2:3 system, all the Raman modes do not change in frequencies. However, the FWHM of the Cu(2) mode increases with the decrease of T_c, indicating strong scattering of charge carriers by the substituted Zn ions in the CuO₂ planes. The induced disorder in the CuO₂ planes may be related with suppression of T_c in the Y---Zn1:2:3 system. Thus, the suppression mechanism in the Y---Zn1:2:3 systems seems to be different from that in the Y---Pr1:2:3 systems.     

Field induced flux pinning in Nd1+xBa2−xCu3O7−δ single crystal

The flux pinning behavior of a Nd_1+xBa_2−xCu₃O_7−δ (Nd123) single crystal, which exhibited a peak effect, has been studied by monitoring the time decay of the magnetic moment. The apparent pinning energy (U₀^*) was deduced from flux creep data on the basis of the Anderson-Kim model. The magnetic field dependence of U₀^* showed maxima at peak fields which depended on the temperatures, in a similar manner to those of critical current densities. In addition, the temperature dependence of U₀^* showed several features. To explain the increase in U₀^* with the field as well as its temperature and field dependence, we made a numerical calculation by introducing an additional pinning energy which increased with increasing field. The results are in good agreement with the experimental data, especially at temperatures above 60 K, where the contribution of field induced pinning centers is believed to be dominant.     

Synthesis of YBa2Cu3O7−x superconducting thin films on LaAlO3 by means of PAMOCVD

High-T_c superconducting thin films have been deposited in situ by means of a plasma assisted metal-organic chemical vapour deposition (PAMOCVD) process on LaAlO₃. An EMCORE high-speed rotating disc reactor was used to deposit the films at a substrate temperature of 600°C to 800°C. The system is equipped with a (remote) 120 W microwave plasma generator. The oxidising plasma gas is N₂O and/or O₂ while Ar was used as the inert carrier gas for the different metal-organics. The influence of different process parameters (such as the temperatures of the metal-organics, substrate temperature, and plasma gas composition) on the superconductive properties and on the morphology of the films was investigated. Surface morphology and composition were studied by SEM/EDX or EPMA, and AC susceptibility measurements were used to investigate the superconductive properties (T_c and J_c). X-ray diffraction measurements indicated that single-phase YBa₂Cu₃O_7−x films were epitaxially grown with the 00l orientation perpendicular to the substrate surface. The critical temperature (T_c) of the films is about 90 K and the critical current density (J_c) is higher than 10⁶ A/cm² at 77 K and zero field.     

Commensurate and incommensurate spin fluctuations in YBa2Cu3O6+y

We present an interpretation of the recent neutron data on the commensurate and incommensurate spin fluctuations found in YBa₂Cu₃O_6+y based on a special configuration of the electronic dispersion and intervention from the d_x²−y²-wave superconducting phase. The observed switch-over between the commensurate and incommensurate fluctuation spectra at the change of frequency or temperature is naturally accounted within this scenario.     

SiO2 passivation film effects on microwave characteristics of YBa2Cu3O7−x-based resonators

SiO₂ film coated as a passivation layer for YBa₂Cu₃O_7−x (YBCO)-based microwave devices is investigated by measuring the microwave characteristics of microstrip line resonators. The SiO₂ film is deposited with its 0.3 to 0.4 μm thickness by a sputtering method using Ar + 30%O₂ plasma. These deposition conditions do not degrade the microwave characteristics and the critical temperature (T_c). Next, the SiO₂ film coated resonators are compared with the uncoated ones for two kinds of degradation conditions: a 200°C annealing in air, and an exposure to air at 85°C and 85% RH (relative humidity). We find that the SiO₂ passivation film prevents the YBCO thin film from the surface degradation and reacting with water.     

The influence of a zirconia environment on the melt processing of YBa2Cu3O7−x

In the self-flux growth of YBa₂Cu₃O_7−x single crystals in zirconia crucibles a large proportion of the boule consists of secondary phases, from which the YBa₂Cu₃O_7−x crystals are then mechanically separated. The same secondary phases also occur in thick films melt processed on zirconia substrates. The nature and relative proportions of the phases depend on the starting composition, the use of crucible or substrate and growth conditions. However, there are a number of common features, which are the subject of this paper. Scanning electron microscopy EDX analysis of crystal growth boules and thick films are reported. Considerable amounts of Zr are found in the flux phases, even at relatively large distances from the crucible or substrate interface. However, large Zr-doping of the 123 phases does not occur and the superconducting properties are not adversely affected by the presence of these small amounts of Zr.     

Plane-chain coupling in YBa2Cu3O7: temperature dependence of the penetration depth

We have studied the penetration depth for a model of YBa₂Cu₃O₇ involving pairing, both in the CuO₂ planes and in the CuO chains. In this model pairing in the planes is due to an attractive interaction, while Coulomb repulsion induces in the chains an order parameter with opposite sign. Due to the anti-crossing produced by hybridization between planes and chains, one obtains a d-wave like order parameter which changes sign on a single sheet of the Fermi surface and has nodes in the gap. We find that our model accounts quite well for the anisotropy of the penetration depth and for the absolute values. We reproduce fairly well the whole temperature dependence for both the a- and the b-directions, including the linear dependence at low temperature. We use a set of parameters which are all quite reasonable physically. Our results for the c-direction are also satisfactory, although the situation is less clear both experimentally and theoretically.     

Low field microwave absorption of YBa2Cu3O7−δ thin films

The modulated microwave absorption in YBa₂Cu₃O_7−δ thin films was studied as a function of temperature, modulation amplitude, and microwave power. The comparative nature of weak links in YBaCuO thin films, ceramics, and powders is discussed.     

Electrical and structural properties of epitaxially grown Y1Ba2Cu3O7 − x and Y2Ba4Cu8O16 − x thin films using the BaF2 method

Thin films of Cu, Y and BaF₂ are co-condensed in ultrahigh vacuum onto SrTiO₃ (1 0 0)-substrates at room temperature without any additional oxygen supply. It is found that the temperature of the ex situ fluorine-oxygen exchange reaction in flowing wet oxygen essentially determines whether the Y₁Ba₂Cu₃O_{7 − x}-phase (T_ex = 850°C) or the Y₂Ba₄Cu₈O_{16 − x}-phase (T_ex = 800°C) forms or any mixture of both phases in between. Small-angle X-ray diffraction verifies the strictly epitaxial growth of the superconducting phases. The variation of the composition around the ideal 1,2,3-stoichiometry affects only the superconducting and normal conducting properties which are measured using the four-probe Montgomery method. The values of the normal state resistivity and its temperature dependence are discussed in combination with a reduced cross section of the conduction paths in the films.     

Crystal growth of superconductive PrBa2Cu3O7−y

Superconductive PrBa₂Cu₃O_7−y (Pr123) crystals have been grown successfully by the travelling-solvent floating-zone (TSFZ) method using 3.7–5.8% PrO, 27–37% BaO, and 60–69% CuO composition solution with the 0.1–0.4% oxygen mixed argon gas atmosphere. The grown crystals have been identified to be Pr123 by a precession camera, X-ray powder diffractions and scanning electron microscopy–X-ray energy dispersion spectroscopy (SEM-EDS). Some portion of the grown TSFZ crystal boules show bulk superconductivity below about 80 K after annealing in oxygen.     

Enhanced diamagnetism in YBa2Cu3O7−δ by hydorgen-plasma treatment

We report that the diamagnetism of as-grown YBa₂Cu₃O_7−δ powders can be enhanced by treatment with RF-generated hydrogen plasma. The field-cooling susceptibility at 5 K is found to increase by up to 24%. The enhancement is reproducible for all five samples studied. The lattice parameter c decreases after hydrogenation. For a sample treated for the shortest period, its pinning potential,obtained from magnetic relaxation measurements, is reduced following H-treatment.     

Study of the superconducting transition in YBa2Cu3O7−δ single crystal by thermopower measurements

We have determined the superconducting transition in YBa₂Cu₃O_7−δ single crystal by measurements of thermopower. Two transitions were observed in both the ab-plane and the c-direction. The high temperature transition may have a close relation to the surface shell of the crystal.