相移法在光栅投影测量中的应用

利用双目CCD相机记录的光栅投影测量技术是一种新型的光学测量方法。为了获得高精度测量相位值，提出一种优化相位测量精度的相移方法。该方法通过投影相传递函数和投影光的光强函数计算相位值，并考虑了测量投影光非正弦、非周期性的影响，提高了投影光栅的条纹精度和相位精度，相位精度为像素级，通过插值可达到亚像素级。     

郎奇法检测大口径光学非球面镜

提出了一种用朗奇法定量检测大口径非球面的新技术。主要以大口径非球面镜的加工表面为研究对象,设计了大口径非球面检测系统,该系统由CCD摄像机、He-Ne激光器、郎奇光栅、微型计算机等组成。并利用大口径非球面检测系统对一个顶点曲率半径为1638．69mm,被测曲面半通光口径为315mm的光学元件的面形进行了实际测量,给出了光学元件标准偏差和峰谷值测量结果。最后对测量结果进行了讨论。研究结果表明：基于郎奇法的几何原理,利用CCD摄像系统定量检测大口径非球面的方法具有较高的精度。     

高效高分辨率大面积透射光栅谱仪特性的理论分析

为提高透射光栅谱仪对激光等离子体Ｘ光源的收集效率的光谱分辨同铲高分辨率大面积航向光栅光谱仪。该谱仪由轮胎镜、无支撑高线密度光栅和软Ｘ光ＣＣＤ相机组成。应用部分相干光衍射理论,研究了该谱仪成偈面上的光强分布和光谱分辩率,在１．４～１２ｎｍ的摄谱范围内光 人发辨率为０．０５ｎｍ,与实验符合得很好。由于其高效率,该谱仪尤其适用于超短飞秒脉冲激光产生等离子体的实验研究。     

彩色组合编码条纹光栅轮廓术

研究了一种新的编码光栅投影三维轮廓术。其中投影光栅利用彩色空间红、绿、蓝三基色相互独立的特性,用彩色条纹对光栅进行编码,以白色条纹为起始位,后接红、绿、蓝（R、G、B）三种颜色的条纺组成一组。改变红、绿、蓝的排列顺序可使各组有不同的编码。根据排列组合原理,红、绿、蓝三色可有6种不同的排列方式。经过编码处理的光栅在保证测量精度不变的前提下,加大了高度测量的范围。由于每条纹只采用0和255两个状态,因此具有较强的抗干扰能力。测量的精度主要取决于图像的分辨率。     

高速动光弹系统及其应用

高速动光弹仪是动态光弹性研究的有效诊断工具,主要用于记录各种结构在动载荷作用下,不同瞬间的应力条纹图像。研究应力波的传播规律,裂纹扩展过程,固体高速变形等。通常的动光弹仪为多火花式动光弹仪。国外也有采用静态光弹仪与转镜式高速分幅相机结合的系统。我们研究调试的动光弹系统,是在高速纹影系统中加入偏振光场,即静态光弹系统、纹影系统与转镜式高速分幅相机结合。在雷管动载荷作用下,应用高压脉冲氙灯光源,单色圆偏振光亮场,获得了不同光弹模型的清晰应力条纹图像。给出应力波的传播过程和孔附近产生的应力集中现象。该系统具有摄影频率高、曝光时间短、测试灵敏度高、适于强载荷、远距离研究大尺寸光弹模型,同时具有透射式和反射式光学系统等特点。从而为动态光。弹性研究提供了有效的测试技术和诊断系统。     

基于InP的全光高速相机的理论和实验研究

为了评估基于瞬态光栅的全光高速相机系统中激发光强与图像信号之间的对应关系,验证基于磷化铟（InP）建立该相机的可行性。针对InP材料从理论上分析了从光子入射激发载流子,到载流子影响折射率,再到折射率影响衍射效率过程中各物理量值之间的关系;并建立了基于衍射光收集的图像探测系统获取InP内部的瞬态光栅分布图像。理论结果给出了针对InP材料的激发光强与载流子浓度的关系,探针激光为 1064 nm时载流子浓度与折射率之间的关系,以及瞬态光栅为矩形光栅时折射率与衍射效率之间的关系,特别指出在基于InP和1064 nm探针激光的高速相机系统中,若时间分辨为1 ps量级,对于532 nm激发光,系统的灵敏度为1.3105 Wcm-2量级。实验结果证明了基于InP和1064 nm探针光可以建立全光高速相机系统,并根据所获得图像得出系统的空间分辨好于5.04 lp/mm。     

基于衍射光栅的CCD相机标定方法

提出一种基于1维线衍射光栅的CCD相机光电响应特性标定方法,该方法利用衍射光栅对入射光束的分束特性,在远场焦平面内形成一系列衍射子光斑,采取有效的方法对多组衍射子光斑峰值测量数据进行融合,得到测量灰度值及通过理论计算得到的理论灰度值,拟合两组数据从而完成对CCD光电响应特性的标定.根据实验室现有的激光源与聚焦光学系统的...     

基于最优化线性波数光谱仪的谱域光学相干层析成像系统

相比传统光谱仪,基于线性波数光谱仪的谱域光学相干层析(OCT)无需对非线性波数干涉光谱数据进行重采样和插值,可大大减少数据计算量并提高成像灵敏度.通过模拟计算干涉光谱信号和点扩散函数,以点扩散函数半峰全宽值的倒数作为评价准则,可以优化包括色散棱镜材料的折射率、顶角角度以及衍射光栅和色散棱镜之间旋转角角度的线性波数光谱仪的结构参数.根据优化结果,实验中选用F2玻璃等边色散棱镜,以光栅-棱镜间旋转角角度为21.8°搭建了最优化线性波数光谱仪,并引入谱域OCT成像系统.实验测得成像系统的轴向分辨率达到8.52μm,灵敏度达到91 dB,6 dB成像深度达到1.2 mm.结合具有通用并行计算能力的图形处理卡,在无需重采样和插值的情况下可实时处理和显示人手指指甲皮肤接缝处的横断面OCT图像,验证了基于最优化线性波数光谱仪的谱域OCT系统的成像性能.     

Polarization and Color Separator Using Binary Phase Grating with Subwavelength Period

A data projector using three liquid crystal display panels has a complex optical system. The illuminating optics separate the beam from a light source into three primary colors and separate those into opposite polarizations using multi-layer films and prisms. A reflection grating with the period of subwavelength has high diffraction efficiency for p polarized light and high regularly reflectance for s polarized light. The diffraction angle of a grating largely depends on the wavelength, because a diffractive optical element (DOE) has large chromatic dispersion. The grating with the period of subwavelength can separate the unpolarized light into polarization components effectively using its polarization dependency and can separate white light into color components using its chromatic dispersion simultaneously. The grating makes the optical system simpler and smaller than those with conventional devices. In this paper the efficiency of polarization separation for the grating is calculated by a rigorous analytical method. Next, the condition for color separation is calculated by Snell#x0027;s law, and an optical system using a grating that performs polarization and color separation is proposed. Experimental results of the DOE fabricated are well matched with those of this simulation.     

小型掠入射式近边X射线吸收谱仪的设计

近边X射线吸收精细结构(NEXAFS)谱包含了吸收原子的局域结构信息,由于其适用范围广,灵敏度高,已经成为研究物质结构的重要手段之一。为了研究有机物的碳1s NEXAFS谱,本文基于气体激光等离子体X射线光源,采用具有平场特性的凹面变线距光栅作为分光元件,面阵CCD作为光谱探测器,设计了一台小型掠入射式近边X射线吸收谱仪。通过优化光栅和CCD的装配方案,得到了入射角88.6°的装配参数。利用光线追迹法分析了谱仪的分辨率,该谱仪工作波段2~5 nm,在4.4 nm处分辨率可达666。通过分析各结构参量误差对谱线半高宽的影响发现,半高宽对入射角的误差最为敏感,优化的装配方案可以实现入射角的高精度调节。利用氮气等离子体光谱测试了光谱仪的性能,结果显示分辨率达到设计指标。     

含缺陷光子晶体传光特性的实验研究

选择MgF2和ZnSe两种材料设计制作了一维缺陷光子晶体,从理论和实验上对带有缺陷的一维光子晶体的传光特性进行了研究.在实验中,一般用光谱仪来测量通过光子晶体的透射光谱,由于光谱仪价格较贵,这种方法不利于制作实用的光子晶体传感器.我们用CCD和光栅代替光谱仪,利用白光光源代替激光器,建立自动测量实验系统进行了实验研究.实验中利用压电陶瓷来改变缺陷层厚度,模拟缺陷层的变化,通过CCD测量衍射光位置来测量透过的光频.实验结果表明,缺陷层厚度的变化和透射光频率之间呈线性关系,通过测量透射光频的变化,可以测量引起缺陷层变化的物理量,这与理论分析一致,说明本实验方法可行.本实验方法研制实用的光子晶体传感器具有一定意义.     

大视场空间相机轻型遮光罩的研制

空间相机遮光罩既能遮挡杂光进入相机镜头,又可利用遮光罩长度和遮光罩内的光栅及表面材料特性,吸收已进入遮光罩的杂散光,能够保证相机获得较高的信噪比。具有优良性能指标的碳纤维复合材料应用于空间相机中能够满足空间相机的结构设计指标,并能大大降低相机的重量。针对某空间相机进行了遮光罩的设计,通过利用有限元模拟仿真分析与试验验证相结合的方法,验证了碳纤维作为遮光罩材料的可行性和是否能够提高光学系统的信噪比。结果表明,碳纤维复合材料应用于空间相机遮光罩的设计是完全可行的。     

Crystal diffraction grating in LiNbO3:Fe derived from interferometric volume holography

A 90° two-beam coupling configuration was used to store an image of an extended object in a 0.032 %wt iron-doped LiNbO₃ crystal. A volume hologram was thus generated, via the photorefractive effect, within the microstructure of the crystal. The time evolution of partial spatial erasure of the hologram under illumination was studied by capturing its reconstructed image on a digital camera and performing a two-dimensional inverse Fourier transform. This produced the refractive index grating created through interference of object and reference beams. The nature, intensity distribution and dimensions of the diffraction grating were derived in order to throw light upon the movement and mechanisms of charges, which create the index grating.     

黑体辐射定律研究及验证

利用微机扫描光栅光谱仪和溴钨灯进行黑体辐射实验研究,分析了黑体的辐射、传递、接收等的误差修正。验证了黑体辐射的基本规律。     

TDI imaging and scanning moiré for online defect detection

This paper explains the application of scanning moiré in association with TDI (Time Delay and Integration) imaging for complete peripheral inspection of cylindrical objects. Based on the structured light technique, a grating pattern modulated by deformations, such as dents on the surface of a rotating cylindrical object, is recorded using a TDI camera. The illumination system consists of an intensity modulated, line generating laser diode aligned at an angle to the camera axis. By using the TDI option for recording every nth line, an online scanning moiré pattern is generated. After providing a simple explanation of the scanning moiré, the effects of object rotation speed and TDI scan speed on the fringe pattern are discussed and demonstrated. The techniques presented here offer low cost solutions to industrial machine vision tasks related to peripheral imaging and inspection of cylindrical objects.     

连续振动悬臂梁的瞬时三维形貌测量

提出一种连续振动悬臂梁瞬时三维形貌的测量方法。利用影栅云纹法在连续振动悬臂梁表面产生包含有三维形貌信息的云纹,采用准直双光源提高亮度,通过高速摄相机获取随时间变化的一系列变形条纹,利用傅里叶变换方法对序列图像进行处理,采用补零延拓法对数据进行处理,以减小频谱泄漏所引起的相位计算误差。将相位解包裹方法用于动态过程瞬时三维相位场的相位展开中,重建了悬臂梁的瞬时三维形貌,再现了悬臂梁的连续振动过程。     

微机扫描黑体辐射实验研究

利用微机扫描光栅光谱仪和溴钨灯进行黑体辐射实验研究，验证了黑体辐射的基本规律；论证了黑体辐射实验方法的可行性，分析了黑体的辐射、传递和接收以及正弦机构等器件的性能和误差修正问题．     

利用双光栅的多普勒频移测速度

衍射光的多普勒频移是与光栅运动速度有关的量.激光束依次通过动光栅、静光栅衍射,然后使1对光频不同、彼此平行又能部分重叠的衍射光束通过硅光电池进行光电转换,得到的信号电流的频率等于多普勒频移.信号电流经I/V转换、f/V转换和A/D转换后,由单片机测出电压,由此就可以确定动光栅的运动速度.最后对利用双光栅的多普勒频移测气垫导轨上滑块的速度进行分析和讨论.     

Application of moiré technique to the measurement of the atmospheric turbulence parameters related to the angle of arrival fluctuations

There are several methods for measuring ground-level atmospheric turbulence parameters, such as the refractive index profile and its fluctuations, correlations of the fluctuations in space and time, and the atmospheric refractive-index structure constant. These methods are based mainly on the measurement of fluctuations in intensity and location of an image formed by light propagating in the turbulent atmosphere or the fluctuations in impinging points of narrow light beams traversing the ground-level atmosphere. Exploiting the moiré technique, we suggest a high-precision approach for determining fluctuaions in the angle of arrival. When a low-frequency grating (carrier grating) is installed at a suitable distance from a telescope, its image, practically, forms on the focal plane of the telescope objective. Superimposing a physical grating (probe grating) of the same pitch as the image grating on the image forms the moiré pattern. The atmospheric turbulence distorts the image grating. Processing the fluctuations of successive moiré fringes can yield the mentioned parameters across a rather large cross section of the atmosphere with high accuracy, because of the moiré technique's magnifying character and access to a large volume of data, and does so in a comparatively simple and reliable manner.     

Design of high-efficiency diffraction gratings based on total internal reflection for pulse compressor

We present designs of high-efficiency compression grating based on total internal reflection (TIR) for picosecond pulse laser at 1053 nm. The setup is devised by directly etching gratings into the bottom side of a prism so that light can successfully enter (or exit) the compression grating. Dependence of the −1 order diffraction efficiencies on the constructive parameters is analyzed for TE- and TM-polarized incident light at Littrow angle by using Fourier modal method in order to obtain optimal grating structure. The electric field enhancement within the high-efficiency TIR gratings is regarded as another criterion to optimize the structure of the TIR gratings. With the criterion of high diffraction efficiency, low electric field enhancement and sufficient manufacturing latitude, TIR compression gratings with optimized constructive parameters are obtained for TE- and TM-polarized incident light, respectively. The grating for TE-polarized light exhibits diffraction efficiencies higher than 0.95 within 23 nm bandwidth and relatively low square of electric field enhancement ratio of 5.7. Regardless of the internal electric field enhancement, the grating for TM-polarized light provides diffraction efficiencies higher than 0.95 within 42 nm bandwidth. With compact structure, such TIR compression gratings made solely of fused silica should be of great interest for application to chirped pulse amplification (CPA) systems.