Atomic Force Microscopy of bulk tendon samples: affect of location and fixation on tissue ultrastructure

Atomic Force Microscopy (AFM) is a surface characterisation technique which analyses topology. To date, AFM studies of tissue ultrastructure have focussed on single collagen fibrils extracted from different tissues prior to analysis. Using sample preparation techniques used in electron microscopy studies, this work uses AFM to analyse the collagen ultrastructure of bulk samples from bovine deep digital flexor tendons (DDFTs). DDFT ultrastructure in regions of the tendon which experience different loading conditions are compared. Samples are analysed post-freezing and post-aldehyde fixation with either 10% formalin or 4% glutaraldehyde in order to investigate the affect of tissue preservation on tissue ultrastructure. The results demonstrate that both fibril diameter and repeat unit of the tendon vary between different regions in the dorsoventral plane, with regions subjected to both tensile and compressive forces exhibiting smaller fibril diameter and repeat unit compared to regions subjected to tensile forces alone. These differences are detectable regardless of the tissue preservation technique used. However these measured differences do vary with preservation techniques with aldehyde-fixed samples exhibiting smaller fibril diameters and larger repeat units compared to frozen samples. These results demonstrate that AFM is a highly suitable technique for the characterisation of different ultrastructures in bulk samples but that it is important to be consistent in the choice of preservation technique.     

Comparative ultrastructural analysis of different regions of two digital flexor tendons of pigs

Tendons are parallel arrays of collagenous fibers which are specialized in resisting and transmitting tensile forces. In this work we examined the structure of the superficial digital flexor tendon (SDFT) and the deep digital flexor tendon (DDFT) of pigs, which are considered "wrap around" tendons and so receive compression and tension forces. In both tendons, fibrocartilaginous areas were observed in the regions subjected to compression plus frictional loading. Histological and ultrastructural analyses of the tensional region showed an extracellular matrix (ECM) rich in collagen bundles, that were all arranged in the same direction. Fibroblasts were seen closely associated with the collagen bundles. Chondrocyte-like cells and high levels of glycosaminoglycans (GAGs) were observed in the compressional regions. The collagen bundles in the compressional region were arranged in several directions and were associated with proteoglycans (PGs). The crimp pattern detected in the tensional region showed that the collagen fibrils were ordered aggregates which formed helical superstructures.     

The interplay between surface micro-topography and -mechanics of type I collagen fibrils in air and aqueous media: An atomic force microscopy study

Calf skin type I collagen fibrils were regenerated from acidic solution and imaged with contact mode atomic force microscopy in air, water, and buffer solution. When imaged in air at a contact force of 20-150 nN, collagen fibrils exhibited a distinct transverse banding pattern with a period of 65 nm, consisting of high ridges and shallow grooves. The force dependence of the images suggests that such banding pattern is attributed to the transverse contraction of the fibril upon dehydration during sample preparation, which reflects the tangential mass density across the fibril. Imaging in water and phosphate buffer solution at a contact force of 15-80 nN revealed hydrated collagen fibrils with smooth surfaces. The rigidity of the collagen fibrils decreased considerably upon hydration. Scanning the cantilever tip in an aqueous medium at a contact force of 90-280 nN enabled us to probe subunit arrangement in the bulk region of the collagen fibril. The results indicate that the molecular assembly in the hydrated fibril is akin to that in the intact form. The image resolution was improved by stabilizing the collagen molecules through crosslinking with glutaraldehyde, which served to resolve microfibril-like structure on the fibril surface. Received 28 March 2000 and Received in final form 15 June 2001     

Synchrotron diffraction study of deformation mechanisms in mineralized tendon

The high stiffness and toughness of biomineralized tissues are related to the material deformation mechanisms at different levels of organization, from trabeculae and osteons at the micrometer level to the mineralized collagen fibrils at the nanometer length scale. Quantitatively little is known about the sub-micrometer deformation mechanisms under applied load. Using a parallel-fibred mineralized tissue from the turkey leg tendon as a model for the mineralized collagen fibrils, we used in situ tensile testing with synchrotron x-ray diffraction to measure the average fibril deformation with applied external strain. Diffraction peak splitting occurred at large strains, implying an inhomogeneous elongation of collagen fibrils. Scanning electron microscopy measurements lead us to conclude that the inhomogeneous mineralization in mineralized tendon is at the origin of the high fracture strain.     

Atomic force microscopy on human trabecular bone from an old woman with osteoporotic fractures

AFM images were taken of the exterior surface of a single trabecula, extracted from a human femoral head removed during surgery for a hip fracture in an old women with former fractures. The images showed a dense structure of bundled collagen fibrils banded with 67 nm periodicity. Bundles were seen to run in parallel in layers confirming the collagen structure seen by other techniques. Single collagen fibrils were seen to cross the bundles, thus forming cross-links between neighboring bundles of collagen fibrils. Some of these crossing fibrils did not have the 67 nm band pattern and their dimensions were about half compared to the neighboring collagen fibrils. Very little mineral was found on the surface of the trabecula. An AFM image of a fracture plane was also displayed. The trabecula was extracted from a region close to the hip fracture. However, there were in this case no obvious features in the images that could be linked directly to osteoporosis, but altered collagen banding and collagen protrusions may alter mechanical competence. A path to extensive studies of the nanometer scale structure of bone was demonstrated.     

Development of Stereocomplex Crystal of Polylactide in High-Speed Melt Spinning and Subsequent Drawing and Annealing Processes

High-speed melt spinning of racemate polylactide (r-PLA), which is a blend of equal amounts of poly(l-lactide) and poly(d-lactide) molecules, was performed up to the take-up velocity of 7.5 km/min. In the fiber structure analysis, particular attention was paid to the formation of stereocomplex crystals, because this crystal form has a melting temperature about 60° higher than the homocrystals. It was found that highly oriented and highly crystallized fibers containing the α-form and stereocomplex crystals were obtained when the take-up velocity exceeded about 4 km/min. The amount of stereocomplex crystal was higher under the spinning conditions of higher take-up velocity, lower throughput rate, and lower extrusion temperature. Under these conditions, higher tensile stress can be applied to the spinning line, and therefore, the orientation-induced crystallization is promoted. Annealing of the fibers obtained at high-take-up velocities, such as 6 km/min, which already have the crystalline structure with a certain amount of stereocomplex crystal, at a temperature between the melting temperatures of α-form and stereocomplex crystals, yielded the fiber structure mainly consisting of highly oriented stereocomplex crystal. The annealed fibers showed fairly high mechanical properties and good thermal stability.     

Mechanical heterogeneity of dentin at different length scales as determined by AFM phase contrast

In this study we sought to gain insights of the structural and mechanical heterogeneity of dentin at different length scales. We compared four distinct demineralization protocols with respect to their ability to expose the periodic pattern of dentin collagen. Additionally, we analyzed the phase contrast resulting from AFM images obtained in tapping mode to interrogate the viscoelastic behavior and surface adhesion properties of peritubular and intertubular dentin, and partially demineralized dentin collagen fibrils, particularly with respect to their gap and overlap regions. Results demonstrated that all demineralization protocols exposed the gap and overlap zones of dentin collagen fibrils. Phase contrast analyses suggested that the intertubular dentin, where the organic matrix is concentrated, generated a higher phase contrast due a higher contribution of energy dissipation (damping) than the highly mineralized peritubular region. At increasing amplitudes, viscoelasticity appeared to play a more significant contribution to the phase contrast of the images of collagen fibrils. The overlap region yielded a greater phase contrast than the more elastic gap zones. In summary, our results contribute to the perspective that, at different length scales, dentin is constituted of structural features that retain heterogeneous mechanical properties contributing to overall mechanical performance of the tissue. Furthermore, the interpretation of phase contrast from images generated with AFM tapping mode appears to be an effective tool to gain an improved understanding of the structure and property relationship of biological tissues and biomaterials at the micro- and nano-scale.     

Atomic force microscopy investigation of chemically stabilized pericardium tissue

Native and chemically stabilized porcine pericardium tissue was imaged by the contact mode atomic force microscopy (AFM), in air. Chemically stabilized pericardium is used as a tissue-derived biomaterial in various fields of the reconstructive and replacement surgery. Collagen type I is the main component of the fibrous layer of the pericardium tissue. In this study, the surface topography of collagen fibrils in their native state in tissue and after chemical stabilization with different cross-linking reagents: glutaraldehyde (GA), dimethyl suberimidate (DMS) and tannic acid (TA) was investigated. It has been found that chemical stabilization causes considerable changes in the surface topography of collagen fibrils as well as in the spatial organization of the fibrils within the tissue. The observed changes in the D-spacing pattern of the collagen fibril correspond to the formation of intrafibrilar cross-links, whereas formation of interfibrilar cross-links is mainly responsible for the observed tangled spatial arrangement of fibrils and crimp structure of the tissue surface. The crimp structure was distinctly seen for the GA cross-linked tissue. Surface heterogeneity of the cross-linking process was observed for the DMS-stabilized tissue. SDS-PAGE electrophoresis was performed in order to evaluate the stabilization effect of the tissues treated with the cross-linking reagents. It has been found that stabilization with DMS, GA or TA enhances significantly the tissue resistance to SDS/NaCl extraction. The relation between the tissue stability and changes in the topography of the tissue surface was interpreted in terms of different nature of cross-links formed by DMS, GA and TA with collagen.     

Collagen fibril organisation in mammalian vitreous by freeze etch/rotary shadowing electron microscopy

Mammalian vitreous gel contains two major network-forming polymeric systems: long, thin fibrils comprising predominantly type II collagen and a meshwork of hyaluronan. The gel structure is maintained primarily by the collagen component, but little is known about the mechanisms of spacing of the collagen fibrils and of interactions between fibrils to form a stable network. In this study we have applied the technique of freeze etching/rotary shadowing electron microscopy in order to reveal the fibrillar network in central, cortical and basal vitreous and to understand the structural relationship between the collagen fibrils. The fibrils were arranged side by side in narrow bundles that frequently branched to link one bundle to another. Only a minor part of the fibrillar network consisted of segments that had a diameter of a single fibril (16.4nm mean diameter). In addition, three morphologically distinct filamentous structures were observed that appeared to form links within the collagen fibrillar network: short, single interlinking filaments of 7.0nm mean diameter, network-forming filaments of 6.7nm mean diameter, and longer filaments of 8.2nm mean diameter. All three types of filamentous structure were removed by digestion of the vitreous gels with Streptomyces hyaluronan lyase prior to freeze etching, indicating that these structures contain or are stabilised by hyaluronan. These filamentous structures may contribute to the structural stability of the vitreous gel.     

Bone matrix like assemblies of collagen: from liquid crystals to gels and biomimetic materials

Skeletal tissues associate in close interaction, a dense organic matrix and a mineral network. In bone, the major structural protein is type I collagen, associated with inorganic crystals of hydroxyapatite. The three-dimensional arrangement of collagen fibrils in compact bone forms regularly ordered networks and a parallel was evidenced between these structures and molecular assemblies described in liquid crystals. Similar structures are now obtained in vitro. Indeed, when purified type I collagen is highly concentrated in an acid soluble state, the protein spontaneously assembles into ordered liquid crystalline phases. After a sol/gel transition triggered by pH increase, biomimetic materials are formed which resemble the exact compact bone matrix architecture over distances reaching centimetres and more. The properties of these highly ordered materials will be reviewed recalling their supramolecular arrangement and the corresponding patterns when visualised in polarised light microscopy (birefringence) and transmission electron microscopy (TEM). The association of inorganic phases (amorphous silica) to form chiral hybrid materials will also be described so as the behaviour of cells (fibroblast adhesion and migration) when seeded on these dense biomimetic matrices.     

A model of the early mineralization process of mantle dentin

The aim of this study was to investigate the relationship between proteoglycans (PGs) and collagen fibrils at the early mineralization process of mantle dentin. Ten first molar dental germs of rats were removed and fixed in glutaraldehyde/formaldehyde in cacodylate buffer and post-fixed in osmium tetroxide. The samples were dehydrated and embedded in epoxy resin. Ultrathin sections were contrasted and analyzed in TEM before and after treatment with EDTA, chondroitinases AC and ABC. After EDTA treatment, a electrondense substance associated with collagen fibril was removed, and did not stain again. A high magnification of these areas showed globular structures with 15 nm diameter surrounding collagen fibrils. In advanced mineralization areas, collagen fibrils showed a banded pattern and at high magnification the fibrils presented a light 10 nm ring inside and a dark 10 nm ring outside. After chondroitinase treatment, the electrondense substance associated with collagen fibrils was removed, showing a banded pattern of clear and dark areas along them. From morphological data, the authors proposed a model of interaction between PGs and collagen fibrils, where glicosaminoglycans chains are inside the fibrils, while the protein core remains outside. That stereochemical arrangement would start the crystal nucleation.     

Unexpected ultrastructral changes in bone osteiod collagens in osteogenesis imperfecta

Osteogenesis Imperfecta (OI) is a heterogeneous, inherited bone disorder usually resulting from a defect in collagen synthesis or function. The Sillence classification recognises four OI subtypes of which type III is the severe, progressively deforming form. Here, we report distinctive ultrastructural abnormalities of bone osteoid collagen fibrils from three patients with OI type III and compared with normal controls. Collagen biochemistry of these patients showed normal alpha1(I) and alpha2(I) chains, despite the structurally abnormal collagen fibrils.

The expected lamellar organisation of normal osteoid was absent in the bone biopsies of these patients. In addition their collagen fibrils had frayed edges and no periodicity was observed in most of these fibrils. These collagen fibrils were also flower like, twisted, spiralled and sparsely distributed throughout a very thick osteoid with patchy mineralisation.

These structurally abnormal collagens may not be able to provide the nucleating and scaffolding sites for normal mineralisation and may lead to the bone fragility observed in OI.     

Porous monoliths consisting of aluminum oxyhydroxide nanofibrils: 3D structure,chemical composition,and phase transformations in the temperature range 25–1700 °C

We present a study on the chemical and structural transformations in highly porous monolitic materials consisting of the nanofibrils of aluminum oxyhydroxides (NOA, Al₂O₃·nH₂O) in the temperature range 20–1700 °C. A remarkable property of the NOA material is the preservation of the monolithic state during annealing over the entire temperature range, although the density of the monolith increases from ~0.02 up to ~3 g/cm³, the total porosity decreases from 99.3 to 25% and remains open up to 4 h annealing at the temperature ~1300 °C. The physical parameters of NOA monoliths such as density, porosity, specific area were studied and a simple physical model describing these parameters as the function of the average size of NOA fibrils—the basic element of 3D structure—was proposed. The observed thermally induced changes in composition and structure of NOA were successfully described and two mechanisms of mass transport in NOA materials were revealed. (i) At moderate temperatures (T?≤?800 °C), the mass transport occurs along a surface of amorphous single fibril, which results in a weak decrease of the length-to-diameter aspect ratio from the initial value ~24 till ~20; the corresponding NOA porosity change is also small: from initial ~99.5 to 98.5%. (ii) At high temperatures (T >?800 °C), the mass transport occurs in the volume of fibrils, that results in changes of fibrils shape to elliptical and strong decrease of the aspect ratio down to ≤?2; the porosity of NOA decreases to 25%. These two regimes are characterized by activation energies of 28 and 61 kJ/mol respectively, and the transition temperature corresponds to the beginning of γ-phase crystallization at 870 °C.

Open image in new window

Graphical abstract

     

Collagen immobilization on 316L stainless steel surface with cathodic deposition of calcium phosphate

Collagen fibril/(calcium phosphate and carbonate) composite coatings on 316L stainless steel were developed with a cathodic deposition technique. The response of SaOS-2 osteoblast-like cells to the collagen/calcium salt-coated 316L steel was investigated. The collagen fibrils were self-assembled on the 316L steel surface and immobilized by their partial incorporation into a calcium salt layer electrodeposited cathodically in Hanks’ solution. The amount of calcium salt depended on the applied cathodic potential. The mineralization of collagen fibrils was observed. The collagen coverage localized and the composition of calcium salts varied on the same specimen. Such non-uniform surfaces affected the cell response. The observed outlines of cell bodies and nuclei on the thin collagen coating were clearer than those on the thick collagen coating in most cases. The collagen coating did not significantly influence the mean viability of cells on the whole specimen surface. Interestingly, the alkaline phosphatase activity per cell on the collagen/calcium salt-coated specimens was higher than that on the as-received specimen. It was revealed that cathodic deposition is an effective technique to immobilize collagen fibrils on a 316L steel surface.     

Imaging sclera with hard X-ray microscopy

In this study, the organization of collagen fibrils within the sclera of the eye was investigated using the 7 keV hard X-ray microscope of the Pohang light source and compared to images from electron and atomic force microscopy. From the captured X-ray images, individual collagen fibrils were observed clearly in a spatial resolution much better than 100 nm, both in longitudinal sections and in transverse sections. Some of the collagen fibrils showed evidence of axial periodicity. In some regions of the samples, we could see cross-bridge like structures between adjacent collagen fibrils. The X-ray microscope also allowed the observation of keratocytes and the lamella structure of the scleral stroma. The X-ray microscope has some unique advantages in the nano-scale imaging of bio-samples relative to other established imaging techniques.     

A new method of detecting changes in corneal health in response to toxic insults

The size and arrangement of stromal collagen fibrils (CFs) influence the optical properties of the cornea and hence its function. The spatial arrangement of the collagen is still questionable in relation to the diameter of collagen fibril. In the present study, we introduce a new parameter, edge-fibrillar distance (EFD) to measure how two collagen fibrils are spaced with respect to their closest edges and their spatial distribution through normalized standard deviation of EFD (NSDEFD) accessed through the application of two commercially available multipurpose solutions (MPS): ReNu and Hippia. The corneal buttons were soaked separately in ReNu and Hippia MPS for five hours, fixed overnight in 2.5% glutaraldehyde containing cuprolinic blue and processed for transmission electron microscopy. The electron micrographs were processed using ImageJ user-coded plugin. Statistical analysis was performed to compare the image processed equivalent diameter (ED), inter-fibrillar distance (IFD), and EFD of the CFs of treated versus normal corneas. The ReNu-soaked cornea resulted in partly degenerated epithelium with loose hemidesmosomes and Bowman's collagen. In contrast, the epithelium of the cornea soaked in Hippia was degenerated or lost but showed closely packed Bowman's collagen. Soaking the corneas in both MPS caused a statistically significant decrease in the anterior collagen fibril, ED and a significant change in IFD, and EFD than those of the untreated corneas (p < 0.05, for all comparisons). The introduction of EFD measurement in the study directly provided a sense of gap between periphery of the collagen bundles, their spatial distribution; and in combination with ED, they showed how the corneal collagen bundles are spaced in relation to their diameters. The spatial distribution parameter NSDEFD indicated that ReNu treated cornea fibrils were uniformly distributed spatially, followed by normal and Hippia. The EFD measurement with relatively lower standard deviation and NSDEFD, a characteristic of uniform CFs distribution, can be an additional parameter used in evaluating collagen organization and accessing the effects of various treatments on corneal health and transparency.     

STEM/TEM studies of collagen fibril assembly

Quantitative scanning transmission electron microscopy (STEM), implemented on a conventional transmission electron microscope with STEM-attachment, has been a primary tool in our laboratory for the quantitative analysis of collagen fibril assembly in vivo and in vitro. Using this technique, a precise measurement of mass per unit length can be made at regular intervals along a fibril to generate an axial mass distribution (AMD). This in turn allows the number of collagen molecules to be calculated for every transverse section of the fibril along its entire length. All fibrils show a near-linear AMD in their tip regions. Only fibrils formed in tissue environments, however, show a characteristic abrupt change in mass slope along their tips. It appears that this tip growth characteristic is common to fibrils from evolutionarily diverse systems including vertebrate tendon and the mutable tissues of the echinoderms. Computer models of collagen fibril assembly have now been developed based on interpretation of the STEM data. Two alternative models have so far been generated for fibril growth by accretion; one is based on diffusion limited aggregation (DLA) and the other based on an interface-limited growth mechanism. Inter-fibrillar fusion can also contribute to the growth of fibrils in vertebrate tissues and STEM data indicates the presence of a tight regulation in this process. These models are fundamental for the hypotheses regarding how cells synthesise and spatially organise an extracellular matrix (ECM), rich in collagen fibrils.     

Measurement of the axial periodicity of collagen fibrils using an image processing method

In this paper, a method is described based on a computer-aided analysis of electron-optical images of collagen fibrils from various tissues, in order to determine the axial periodicity of such fibrils. The method gives information at a level of 2-3nm.     

A study of fibrous long spacing collagen ultrastructure and assembly by atomic force microscopy

Fibrous long spacing collagen (FLS) fibrils are collagen fibrils that display a banding with periodicity greater than the 67nm periodicity of native collagen. FLS fibrils can be formed in vitro by addition of alpha(1)-acid glycoprotein to an acidified solution of monomeric collagen, followed by dialysis of the resulting mixture. We have investigated the ultrastructure of FLS fibrils formed in vitro using the atomic force microscope (AFM). The majority of the fibrils imaged showed typical diameters of approximately 150nm and had a distinct banding pattern with a approximately 250nm periodicity. However, we have also observed an additional type of FLS fibril, which is characterized by a secondary banding pattern surrounding the primary bands. These results are compared with those obtained in past investigations of FLS ultrastructure carried out using the transmission electron microscope (TEM). The importance of the fibril's surface topography in TEM staining patterns is discussed. Images of FLS fibrils in various stages of assembly have also been collected, and the implications of these images in determining the mechanism of assembly and the formation of the characteristic banding pattern of the fibrils is discussed.