Vinyl polymerization of norbornene by nickel(II) complexes bearing β‐diketiminate ligands

Norbornene polymerizations were carried out using nickel(II) bromide complexes CH{C(R)NAr}₂NiBr ( 1 , R = CH₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 2 , R = CH₃, Ar = 2, 6‐Me₂C₆H₃; 3 , R = CF₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 4 , R = CF₃, Ar = 2, 6‐Me₂C₆H₃) in the presence of methylaluminoxane. Compound 3 is the most active norbornene polymerization catalyst of all the nickel complexes tested. The activity of theses catalysts increases with increases in steric bulk of the substituents on the aryl rings. The electronic nature of the ligand backbone also affects the activity. The resulting polynorbornenes are vinyl type by IR and NMR analyses. Copyright © 2007 John Wiley & Sons, Ltd.     

Novel nickel (II) complexes chelating β‐diketiminate ligands: synthesis and simultaneous polymerization and oligomerization of ethylene

Two novel nickel (II) complexes, CH{C(CF₃)NAr}₂NiBr ( 1 , Ar = 2,6‐ⁱPr₂C₆H₃ and 2 , 2,6‐Me₂C₆H₃), were synthesized by the reaction of the lithium salt of fluorinated β‐diketiminate backbone ligands with (1,2‐dimethoxyethane) nickel (II) bromide [(DME)NiBr₂]. The solid‐state structure of nickel (II) complex 2 as a dimer reveals four‐coordination and a tetrahedral geometry with bromide bridged by single crystal X‐ray measurement. Both complexes catalyze simultaneous polymerization and oligomerization of ethylene when activated by methylaluminoxane (MAO). It was found that the reaction temperature has a pronounced effect on the activity of ethylene polymerization and the molecular weight of obtained polyethylene. In addition, the nickel catalytic systems predominantly produce linear polyethylene with unsaturated end groups. Copyright © 2006 John Wiley & Sons, Ltd.     

Nickel and cobalt complexes bearing β‐ketoamine ligands: syntheses,structures and catalytic behavior for norbornene polymerization

Late transition metal (nickel, cobalt) complexes (1, 2) with β‐ketoamine ligand (L) based on the pyrazolone derivative are synthesized by condensing 1‐phenyl‐3‐methyl‐4‐benzoyl‐5‐pyrazolone with p‐fluoroaniline, and then treating the β‐ketoamine (L) produced with the respective metal halide. The bis(β‐ketoamine)metal complexes can act as catalyst precursors for norbornene polymerization with activation by methylaluminoxane. The effects of the central metal variation in the complex on catalyst activities and polymer microstructure are described. Copyright © 2005 John Wiley & Sons, Ltd.     

Tetrylenes chelated by bifunctional β‐diketiminate ligand: structure and possible applications

The synthesis and structure of heteroleptic tetrylenes containing bifunctional β‐diketiminate ligand are reported. Compounds were prepared via a protolytic reaction of free β‐diketimine {N‐[(2‐MeO)C₆H₅]}N═C(Me)CH═C(Me)N(H){N′‐[(2‐MeO)C₆H₅]} (L^COH) and {N‐[(2‐MeO)C₆H₅]}N?CHCH?CHN(H){N′‐[(2‐MeO)C₆H₅]} (L^HOH), respectively, with corresponding bis(amide) – M[N(SiMe₃)₂]₂ (M = Ge, Sn, Pb) – in equimolar ratio or via the salt elimination route from lithium precursors generated from L^HOH/L^COH species and slight excess of SnCl₂ or GeCl₂.dioxane complex. Only heteroleptic complexes were obtained by the mentioned methods. Products were characterized by multinuclear NMR spectroscopy techniques and structures of four of them have been determined by X‐ray diffraction methods. Complexes L^HOGeCl and L^COSnN(SiMe₃)₂ crystallize as monomers with the three‐coordinated metal centres by one chloro or amido ligand and one bidentate β‐diketiminato unit, in contrast to the structure of L^COSnCl, which reveals a dimeric character and compound L^COPbN(SiMe₃)₂, where the central atom of lead is five‐coordinated by methoxy groups of the ligand. Complex L^COSnN(SiMe₃)₂ was tested as a catalyst for polymerization of various epoxides_. Copyright © 2014 John Wiley & Sons, Ltd.     

Nickel(II) complexes bearing pyrazolylimine ligand: synthesis,structure, and catalytic properties for vinyl‐type polymerization of norbornene

Two nickel(II) complexes of {2‐[C₃HN₂(R₁)₂‐3,5]}[C(R₂)?N(C₆H₃ⁱPr₂‐2,6)]NiBr₂ (complex 1 : R₁ = CH₃, R₂ = 2,4,6‐trimethylphenyl; complex 2 : R₁ = R₂ = Ph) were synthesized and characterized. The solid‐state structure of complex 1 has been confirmed by X‐ray single‐crystal analysis. Activated by methylaluminoxane (MAO), complexes 1 and 2 are capable of catalyzing the polymerization of norbornene with moderate activities [up to 10.56 × 10⁵ gPNBE (mol Ni h)^?1] with high molecular weights (M_w?13.56 × 10⁵ g mol^?1) and molecular weight distributions were around 2. The influences of polymerization parameters such as reaction temperature and Al–Ni molar ratio on catalytic activity and molecular weight of the polynorbornene were investigated in detail. The obtained polynorbornenes were characterized by means of ¹H‐NMR and FTIR techniques. The analytical results of polymer structures indicated that the norbornene polymerization is vinyl‐type polymerization rather than ROMP. Copyright © 2009 John Wiley & Sons, Ltd.     

Vinyl polymerization of norbornene catalyzed by a new bis(β‐ketoamino)nickel(II) complex–methylaluminoxane system

A new β‐ketoimine ligand was prepared through traditional condensation of 2‐acetylcyclohexanone with 1‐naphthylamine. Consequently, the new moisture‐ and air‐stable bis(β‐ketoamino)nickel(II) complex Ni[2‐CH₃C(O)C₆H₈(NAr)]₂ (Ar = naphthyl) was synthesized and characterized. The solid‐state structures of the ligand and complex have been determined by single‐crystal X‐ray diffraction. Additionally, the new complex is a highly active catalyst precursor for polymerization of norbornene in combination with methylaluminoxane. Copyright © 2005 John Wiley & Sons, Ltd.     

Vinylic and ring‐opening metathesis polymerization of norbornene with bis(β‐ketoamine) cobalt complexes

Cobalt complexes 1 – 4 bearing N,O‐chelate ligands based on condensation products of 1‐phenyl‐3‐methyl‐4‐benzoyl‐5‐pyrazolone with aniline, o‐methylaniline, α‐naphthylamine, and p‐nitroaniline, respectively, were synthesized, and the structures of 1 and 4 were characterized by single‐crystal X‐ray diffraction analyses. The bis(β‐ketoamine) cobalt complexes could act as moderately active catalyst precursors for norbornene polymerization with the activation of methylaluminoxane. This catalytic reaction proceeded mainly through a vinyl‐type polymerization mechanism. ¹H NMR and IR showed that in all cases, a small amount of double bonds raised from ring‐opening metathesis polymerization (ROMP) was present in the polymerization products. The variation of the polymerization conditions affected the ROMP unit ratio in the polynorbornenes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5535–5544, 2005     

Pd(II) complexes bearing di‐ and monochelate fluorinated β‐ketonaphthyliminato ligand and their catalytic properties towards vinyl‐addition polymerization and copolymerization of norbornene and ester‐functionalized norbornene derivative

Fluorinated β‐ketonaphthyliminate ligand CF₃C(O)CHC[HN(naphthyl)]CH₃ ( L1 ) and Pd(II) complexes with dichelate fluorinated β‐ketonaphthyliminato ligand, {CF₃C(O)CHC[N(naphthyl)]CH₃}₂Pd ( C1 ), as well as with monochelate fluorinated β‐ketonaphthyliminato ligand, {CF₃C(O)CHC[N(naphthyl)]CH₃}Pd(CH₃)(PPh₃) ( C2 ), were synthesized and their solid‐state structures were confirmed using X‐ray crystallographic analysis. The Pd(II) complexes were employed as precursors to catalyze norbornene (NB) homo‐ and copolymerization with ester‐functionalized NB derivative using B(C₆F₅)₃ as a co‐catalyst. High activity up to 2.3 × 10⁵ g_polymer mol_Pd^?1 h^?1 for the C1 /B(C₆F₅)₃ system and 3.4 × 10⁶ g_polymer mol_Pd^?1 h^?1 for the C2 /B(C₆F₅)₃ system was exhibited in NB homopolymerization. Moreover, the Pd(II) complexes exhibited a high level of tolerance towards the ester‐functionalized MB monomer. In comparison with the C1 /B(C₆F₅)₃ system, the C2 /B(C₆F₅)₃ system exhibited better catalytic property towards the copolymerization of NB with 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃), and soluble vinyl‐addition‐type copolymers were obtained with relatively high molecular weights (3.6 × 10⁴–7.5 × 10⁴ g mol^?1) as well as narrow molecular weight distributions (1.49–2.15) depending on the variation of monomer feed ratios. The NB‐COOCH₃ insertion ratio in all copolymers could be controlled in the range 2.8–21.0 mol% by tuning a content of 10–50 mol% NB‐COOCH₃ in the monomer feed ratios. Copolymerization kinetics were expressed by the NB and NB‐COOCH₃ monomer reactivity ratios: r_NB‐COOCH3 = 0.18, r_NB = 1.28 were determined for the C1 /B(C₆F₅)₃ system and r_NB‐COOCH3 = 0.19, r_NB = 3.57 for the C2 /B(C₆F₅)₃ system using the Kelen–Tüdõs method. Copyright © 2014 John Wiley & Sons, Ltd.     

Copolymerization of styrene and norbornene with β‐diketiminato nickel/methylaluminoxane catalytic system

Styrene–norbornene (S‐N) copolymerizations were carried out using β‐diketiminato nickel complexes CH{C(CF₃)NAr}₂NiBr (Ar = 2,6‐ⁱPr₂C₆H₃, 1 ; Ar = 2,6‐Me₂C₆H₃, 2 ) in the presence of methylaluminoxane. The influence of the comonomer feed content and polymerization temperature on the conversion and composition of the copolymers with the catalytic system was investigated. An increase in the feed ratio of S/N led to an increase in the incorporated styrene content of the resulting copolymer. NMR characterization of the copolymers generated with the catalytic systems showed that the random S‐N copolymers are produced. Differential scanning calorimetric determination of the copolymers shows higher T_g values than polystyrene, and gel permeation chromatographic measurements have shown that the copolymers possess rather narrow molecular weight distributions, suggesting that the copolymerization take place at a single active site. Copyright © 2012 John Wiley & Sons, Ltd.     

Ring‐opening polymerization of lactide, ε‐caprolactone and their copolymerization catalyzed by β‐diketiminate zinc complexes

A series of zinc silylamido complexes bearing non‐symmetric β ‐diketiminate ligands were synthesized and structurally characterized. Ring‐opening polymerization (ROP) of rac ‐lactide catalyzed by these zinc complexes afforded heterotactic polylactides at room temperature (P _r = 0.79 ~ 0.83 in THF). The steric and electronic characteristics of the ancillary ligands showed significant influence on the polymerization performance of the corresponding zinc complexes. All these zinc complexes also showed moderate activities toward the polymerization of ε ‐caprolactone at ambient temperature in toluene, producing polycaprolactones (PCLs) with high molecular weights and moderate polydispersities. PCL‐b ‐PLLA copolymers could be obtained via three different copolymerization strategies (one‐pot polymerization, and sequential addition of the two monomers in either order) by adopting complex 6 as the initiator through the adjustment of reaction temperatures. The diblock nature of the copolymers was confirmed by ¹³C NMR spectroscopy and DSC analysis.     

Addition polymerization of norbornene using bis(β‐ketoamino)nickel(II)/tris(pentafluorophenyl)borane catalytic systems

Norbornene polymerizations proceeded in toluene with bis(β‐ketoamino)nickel(II) {Ni[CH₃C(O)CHC(NR)CH₃]₂ [R = phenyl ( 1 ) or naphthyl ( 2 )]} complexes as the catalyst precursors and the organo‐Lewis compound tris(pentafluorophenyl)borane [B(C₆F₅)₃] as a unique cocatalyst. The polymerization conditions, such as the cocatalyst/catalyst ratio (B/Ni), catalyst concentration, monomer/catalyst ratio (norbornene/Ni), polymerization temperature, and polymerization time, were studied in detail. Both bis(β‐ketoamino)nickel(II)/B(C₆F₅)₃ catalytic systems showed noticeably high conversions and activities. The polymerization activities were up to 3.64 × 10⁷ g of polymer/mol of Ni h for complex 1 /(B(C₆F₅)₃ and 3.80 × 10⁷ g of polymer/mol of Ni h for complex 2 /B(C₆F₅)₃, and very high conversions of 90–95% were maintained; both polymerizations provided high‐molecular‐weight polynorbornenes with molecular weight distributions (weight‐average molecular weight/number‐average molecular weight) of 2.5–3.0. The achieved polynorbornenes were confirmed to be vinyl‐addition and atactic polymers through the analysis of Fourier transform infrared, ¹H NMR, and ¹³C NMR spectra, and the thermogravimetric analysis results showed that the polynorbornenes exhibited good thermal stability (decomposition temperature > 410 °C). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4733–4743, 2007     

Vinyl‐type polymerization of norbornene by nickel(II) bisbenzimidazole catalysts

Novel nickel(II) bisbenzimidazole complexes were prepared via a three‐step synthetic procedure consisting of aniline/diacid condensation, ligand N‐alkylation, and metal complexation. The complexes were characterized by X‐ray crystallography and found to possess a pseudotetrahedral geometry. Upon activation with methylaluminoxane, these nickel bisbenzimidazoles did not polymerize simple olefins (e.g., ethylene, propylene, and 1‐butene) but were found to carry out the rapid and efficient polymerization of norbornene. The polynorbornene products were characterized by gel permeation chromatography/light scattering, ¹³C NMR, and IR, and their Mark–Houwink and dn/dc parameters were determined. The molecular weights of the polynorbornenes were very high (weight‐average molecular weight = 587,000–797,000 g/mol). ¹³C NMR suggested that the polymerization occurred via vinyl addition (i.e., a 2,3‐linked polymer); no ring‐opened product was observed. Thermogravimetric analysis indicated that the polynorbornenes were stable up to 400 °C under nitrogen. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2095–2106, 2003     

Ni(II) and Pd(II) complexes bearing novel bis(β‐ketoamino) ligand and their catalytic activity toward copolymerization of norbornene and 5‐norbornene‐2‐yl acetate combined with B(C6F5)3

Two complexes Mt{C₁₀H₈(O)C[N(C₆H₅)]CH₃}₂ [Mt = Ni(II); Mt = Pd(II)] were synthesized, and the solid‐state structures of the complexes have been determined by single‐crystal X‐ray diffractions. Homopolymerization of norbornene (NB) and copolymerization of NB and 5‐norbornene‐2‐yl acetate (NB‐OCOCH₃) were carried out in toluene with both the two complexes mentioned above in combination with B(C₆F₅)₃. Both the catalytic systems exhibited high activity toward the homopolymerization of NB (as high as 2.7 × 10⁵ g_polymer/mol_Ni h, for Ni(II)/B(C₆F₅)₃ and 2.1 × 10⁵ g_polymer/mol_Pd h for Pd(II)/B(C₆F₅)₃, respectively.). Although the Pd(II)/B(C₆F₅)₃ shows very lower activity toward the copolymerization of NB with NB‐OCOCH₃, Ni(II)/B(C₆F₅)₃ shows a high activity and produces the addition‐type copolymer with relatively high molecular weights (MWs; 1.80–2.79 × 10⁵ g/mol) as well as narrow MW distribution (1.89–2.30). The NB‐OCOCH₃ content in the copolymers can be controlled up to 5.8–12.0% by varying the comonomer feed ratios from 10 to 50%. The copolymers exhibited high transparency, high glass transition temperature (T_g > 263.9 °C), better solubility, and mechanical properties compared with the homopolymer of NB. The reactivity ratios of the two monomers were determined to be r_NB‐OCOMe = 0.08, r_NB = 7.94 for Ni(II)/B(C₆F₅)₃ system, and r_NB‐OCOMe = 0.07, r_NB = 6.49, for Pd(II)/B(C₆F₅)₃ system by the Kelen‐Tüdõs method. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Controlled vinyl‐type polymerization of norbornene with a Nickel(II) diphosphinoamine/methylaluminoxane catalytic system

A novel nickel‐based complex coordinated with an asymmetric diphosphinoamine ligand was synthesized and fully characterized. Single crystals of good quality were also obtained, and the solid‐state structure of the complex was studied via X‐rays diffraction. The catalytic activity of this Ni(II) complex in the vinyl‐type polymerization of norbornene was studied with methylaluminoxane (MAO) as the cocatalyst/activator. The influence of the reaction time, the equivalents of MAO used, and the concentration of the monomer on: (i) the activity of the catalytic system; (ii) the isolated yield of the polymer; and (iii) the molecular weight and molecular weight distribution of the polymer were investigated. The isolated polynorbornene (PNB) yields are significantly higher compared with those reported for other similar nickel‐based systems. The as‐obtained PNBs are characterized by high molecular weights and relatively narrow and monomodal molecular weight distributions (amongst the narrowest reported in the literature). The linear dependence of the molecular weight of the obtained PNB on the concentration of norbornene points toward a controlled polymerization reaction. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5241–5250, 2009     

Synthesis of ferrocene‐containing N‐aryloxo β‐ketoiminate lanthanide complexes and polymerization of ε‐caprolactone

The synthesis, characterization and ε‐caprolactone polymerization behavior of lanthanide amido complexes stabilized by ferrocene‐containing N‐aryloxo functionalized β‐ketoiminate ligand FcCOCH₂C(Me)N(2‐HO‐5‐Bu^t‐C₆H₃) (LH₂, Fc = ferrocenyl) are described. The lanthanide amido complexes [LLnN(SiMe₃)₂(THF)]₂ [Ln = Nd ( 1 ), Sm ( 2 ), Yb ( 3 ), Y ( 4 )] were synthesized in good yields by the amine elimination reactions of LH₂ with Ln[N(SiMe₃)₂]₃(µ‐Cl)Li(THF)₃ in a 1:1 molar ratio in THF. These complexes were characterized by IR spectroscopy and elemental analysis, and ¹H NMR spectroscopy was added for the analysis of complex 4 . The definitive molecular structures of complexes 1 and 3 were determined by X‐ray diffraction studies. Complexes 1 – 4 can initiate the ring‐opening polymerization of ε‐caprolactone with moderate activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Homo‐ and copolymerization of ethylene and norbornene with bis(β‐diketiminato) titanium complexes activated with methylaluminoxane

Homo‐ and copolymerization of ethylene and norbornene were investigated with bis(β‐diketiminato) titanium complexes [ArNC(CR₃)CHC(CR₃)NAr]₂TiCl₂ (R = F, Ar = 2,6‐diisopropylphenyl 2a; R = F, Ar = 2,6‐dimethylphenyl 2b ; R = H, Ar = 2,6‐diisopropylphenyl 2c ; R = H, Ar = 2,6‐dimethylphenyl 2d) in the presence of methylaluminoxane (MAO). The influence of steric and electric effects of complexes on catalytic activity was evaluated. With MAO as cocatalyst, complexes 2a–d are moderately active catalysts for ethylene polymerization producing high‐molecular weight polyethylenes bearing linear structures, but low active catalysts for norbornene polymerization. Moreover, 2a – d are also active ethylene–norbornene (E–N) copolymerization catalysts. The incorporation of norbornene in the E–N copolymer could be controlled by varying the charged norbornene. ¹³C NMR analyses showed the microstructures of the E–N copolymers were predominantly alternated and isolated norbornene units in copolymer, dyad, and triad sequences of norbornene were detected in the E–N copolymers with high incorporated content of norbornene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 93–101, 2008     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

The structure–activity relationship of some hexacoordinated dimethyltin(IV) complexes of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones

The study was focused on the structure–activity relationship of some newly synthesized hexacoordinated dimethyltin(IV) complexes of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones. These complexes were screened for their antibacterial activity against a Gram‐negative bacterium (Pseudomonas aeruginosa) and Gram‐positive bacteria (Streptomyces griseus, Staphylococcus aureus, Bacillus subtilis) and the results were compared with those of a standard antibacterial drug. Some of the complexes were also screened for their antifungal activity against various fungi (Aspergillus niger, A. flavus, Trichoderma viride, Fusarium oxysporum) and were found to be active. These new hexacoordinated complexes of dimethyltin(IV) were generated by reactions of dimethyltin(IV) dichloride and sodium salts of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones in 1:1:1 molar ratio in refluxing dry benzene. Plausible structures of these complexes were suggested with the aid of physicochemical and spectroscopic studies. ¹¹⁹Sn NMR spectral data revealed the presence of a hexacoordinated tin centre in these dimethyltin(IV) complexes. Copyright © 2015 John Wiley & Sons, Ltd.