The β‐silicon effect. 4: substituent effects on the solvolysis of 1‐alkyl‐2‐(aryldimethylsilyl)ethyl trifluoroacetates

Solvolysis rates of 2‐(aryldimethylsilyl)‐1‐methylethyl and 2‐(aryldimethylsilyl)‐1‐tert‐butylethyl trifluoroacetates were determined conductimetrically in 60% (v/v) aqueous ethanol. The effects of aryl substituents at the silicon atom on the solvolysis rates at 50 °C were correlated with parameters of r⁺ = 0.15 with the Yukawa–Tsuno equation, giving ρ values of ?1.5 for both secondary α‐Me and α‐tert‐Bu systems. The ρ values for those secondary systems are less negative than ?1.75 for the 2‐(aryldimethylsilyl)ethyl system that proceeds by the Eaborn (non‐vertical) mechanism, while they are distinctly more negative than ?0.99 for 2‐(aryldimethylsilyl)‐1‐phenylethyl system that should proceed by the Lambert (vertical) mechanism. There was a fairly linear relationship between the reaction constants (ρ) for the β‐silyl substituent effects and the solvolysis reactivities for a series of β‐silyl substrates. The solvolyses of the α‐Me and tert‐Bu substrates proceed through the transition state (TS) with an appreciable degree of the β‐silyl participation, close to the Eaborn (non‐vertical) TS rather than to the Lambert (vertical) TS. Copyright © 2010 John Wiley & Sons, Ltd.     

Study of the effects of unsupervised over‐the counter whitening products on dental enamel using μ‐Raman and μ‐EDXRF spectroscopies

The purpose of this in vitro study was to assess whether the mineralization degree and elemental content in tooth enamel are altered when bleaching the teeth with two different over‐the‐counter bleaching gels, exceeding the recommendations of the manufacturer. In order to perform this evaluation, 12 healthy teeth were used, six samples were treated with Teeth Whitening Home Kit, and the other six samples were treated with WHITE! (Bingo‐UK) bought in online shopping sites, for the period of 39 days. The pH of each product and the elemental content of each sample, before and after, were obtained by energy dispersive X‐ray spectrometry and phosphate (PO₄^3‐) profile was evaluated with Raman spectroscopy. Data was analyzed accordingly to a pre‐established plan with a mixed‐model ANOVA for repeated measures, significance was set at 5%. Both products were markedly acidic and below enamel critical level of 5.5. Moreover, seven days after treatment, demineralization was significant, wherein at the end of the study the degree of demineralization seems to be permanent. Copyright © 2015 John Wiley & Sons, Ltd.     

Thermal reaction of electron deficient 4‐oxo‐4H‐pyrazole 1,2‐dioxide with cycloheptatriene: the first examples of the formation of an endo‐[4π + 6π]‐cycloadduct and an intramolecular 1,3‐dipolar reaction leading to a heterocage

The reaction of 3,5‐bis(methoxycarbonyl)‐4‐oxo‐4H‐pyrazole 1,2‐dioxide (1a) with 1,3,5‐cycloheptatriene (2b) gave a mixture of the novel endo‐[4 + 6]‐cycloadduct (4ab), anti‐exo‐[4 + 2]‐cycloadduct (5ab), and the heterocage (6ab) derived from the intramolecular 1,3‐dipolar cycloaddition reaction of the syn‐endo‐[4 + 2]‐cycloadduct. Analogous endo‐[4 + 6] selectivity in 1,3‐dipolar cycloadditions has not been reported previously. The X‐ray analysis indicates that 6ab has a very long N_sp3–N_sp3 bond distance of 1.617(4) Å. The cycloaddition behaviour is discussed on the basis of transition‐state structures optimized at the B3LYP/6‐31G(d) level of theory, from which predictions of the peri‐, regio‐, and stereoselectivities agreed well with the experimental results. Copyright © 2012 John Wiley & Sons, Ltd.     

Mechanistic study on Mo(CO)6‐catalyzed intramolecular [2 + 2] or [2 + 2 + 1] cycloaddition reaction of 5‐allenyl‐1‐ynes

By means of density functional theory, the Mo(CO)₆‐catalyzed intramolecular [2 + 2] or [2 + 2 + 1] cycloaddition reaction of 5‐allenyl‐1‐ynes was investigated. All the intermediates and transition states were optimized completely at B3LYP/6‐311++G(d,p) level (LANL2DZ(f) for Mo). Calculations indicate that the complexation of 5‐allenyl‐1‐ynes with Mo(CO)₆ occurred preferentially at the triple bond to give the complex M1 and then the complexation with the distal double bond of the allenes generates the complex M5 . In this reaction, Mo(CO)₆‐catalyzed intramolecular [2 + 2] cycloaddition is more favorable than [2 + 2 + 1] cycloaddition. The reaction pathway Mo(CO)₆ + R → M5 → T7 → M12 → M13 → T11 → M18 → P4 is the most favorable one, and the most dominant product predicted theoretically is P4 . The solvation effect is remarkable, and it decreases the reaction energy barriers. Copyright © 2011 John Wiley & Sons, Ltd.     

Vibrational spectroscopy and DFT calculations of di‐amino acid peptides: α‐ and β‐N‐acetyl‐L‐Asp‐L‐Glu in the solid state

Experimental vibrational spectroscopic studies and density functional theory (DFT) calculations of the di‐amino acid peptide derivatives α‐ and β‐N‐acetyl‐L‐Asp‐L‐Glu have been undertaken. Raman and infrared spectra have been recorded for samples in the solid state. DFT simulations were conducted using the B3‐LYP correlation functional and the cc‐pVDZ basis set to determine energy minimized/geometry optimized structures (based on a single isolated molecule in the gaseous state). Normal coordinate calculations have provided vibrational assignments for fundamental modes, including their potential energy distributions. Significant differences are observed between α‐ and β‐N‐acetyl‐L‐Asp‐L‐Glu both in the computed structures and in the vibrational spectra. The combination of experimental and calculated spectra provide an insight into the structural and vibrational spectroscopic properties of di‐amino acid peptide derivatives. Copyright © 2009 John Wiley & Sons, Ltd.     

The excited state dynamics study of di‐2‐pyridylketone in the A‐band and B‐band absorptions by using resonance Raman spectroscopy,IR and UV–visible spectroscopy

Excitation wavelengths of 282.4, 273.9 (A band), 252.7, 239.5 and 228.7 nm (B band) resonance Raman spectra were acquired for di‐2‐pyridylketone, and density functional calculations were carried out to help in the elucidation of the photo relaxation dynamics of A‐band and B‐band electronic transitions. The resonance Raman spectra show that the intensity pattern of the A band presents great difference from that of the B band, which indicate that the short‐time A‐band (S₀→S₄) photo relaxation dynamics have substantial difference from that of B band (S₀→S₁₀) . The overall picture of short‐time dynamics and the vibronic coupling mechanisms are interpreted using Albrecht's theory. Copyright © 2012 John Wiley & Sons, Ltd.     

Kinetics and mechanisms of gas‐phase decarbonylation of α‐methyl‐trans‐cinamaldehyde and E‐2‐methyl‐2‐pentenal under homogeneous catalysis of hydrogen chloride

The kinetics of the gas‐phase elimination of α‐methyl‐trans‐cinamaldehyde catalyzed by HCl in the temperature range of 399.0–438.7 °C, and the pressure range of 38–165 Torr is a homogeneous, molecular, pseudo first‐order process and undergoing a parallel reaction to produce via (A) α‐methylstyrene and CO gas and via (B) β‐methylstyrene and CO gas. The decomposition of substrate E‐2‐methyl‐2‐pentenal was performed in the temperature range of 370.0–410.0 °C and the pressure range of 44–150 Torr also undergoing a molecular, pseudo first‐order reaction gives E‐2‐pentene and CO gas. These reactions were carried out in a static system seasoned reactions vessels and in the presence of toluene free radical inhibitor. The rate coefficients are given by the following Arrhenius expressions:

• Products formation from α‐methyl‐trans‐cinamaldehyde
• α‐methylstyrene :
• β‐methylstyrene :
• Products formation from E‐2‐methyl‐2‐pentenal
• E‐2‐pentene :

The kinetic and thermodynamic parameters for the thermal decomposition of α‐methyl‐trans‐cinamaldehyde suggest that via (A) proceeds through a bicyclic transition state type of mechanism to yield α‐methylstyrene and carbon monoxide, whereas via (B) through a five‐membered cyclic transition state to give β‐methylstyrene and carbon monoxide. However, the elimination of E‐2‐methyl‐2‐pentenal occurs by way of a concerted cyclic five‐membered transition state mechanism producing E‐2‐pentene and carbon monoxide. The present results support that uncatalyzed α‐β‐unsaturated aldehydes decarbonylate through a three‐membered cyclic transition state type of mechanism. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural and vibrational study of 2‐(2′‐ furyl)‐4,5‐1H‐dihydroimidazole

In this study 2‐(2′‐furyl)‐4,5‐1H‐dihydroimidazole (1) was prepared and then characterized by infrared, Raman, and multidimensional nuclear magnetic resonance (NMR) spectroscopies. The crystal and molecular structures of 1 were determined by X‐ray diffraction methods. The density functional theory (DFT) and second‐order Møller–Plesset theory (MP2) with Pople's basis set show that there are two conformers for the title molecule that have been theoretically determined in the gas phase, and that only one of them, conformer I, is present in the solid phase. NMR spectra observed for 1 were successfully compared with the calculated chemical shifts at the B3LYP/6‐311++G** level theorized for this conformer. The harmonic vibrational frequencies for the optimized geometry of the latter conformer were calculated at the B3LYP/6‐311++G** level in the approximation of the isolated molecule. For a complete assignment of the IR and Raman spectra in the solid phase of 1 , DFT calculations were combined with Pulay´s scaled quantum mechanics force field (SQMFF) methodology to fit the theoretical frequency values to the experimental ones. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and vibrational analysis of N‐(2′‐Furyl)‐Imidazole

The N‐(2′‐furyl)‐imidazole ( 1 ) has been prepared and characterized using infrared, Raman and multidimensional nuclear magnetic resonance spectroscopies. Theoretical calculations have been carried out by employing the Density Functional Theory (DFT) method, in order to optimize the geometry of their two conformers in the gas phase and to support the assignments of the vibrational bands of 1 to their normal modes. For a complete assignment of the compound, DFT calculations were combined with Scaled Quamtum Mecanic Force Field (SQMFF) methodology in order to fit the theoretical wavenumber values to the experimental one. Furthermore, Natural Bond Orbital (NBO) and topological properties by Atoms In Molecules (AIM) calculations were performed to analyze the nature and magnitude of the intramolecular interactions. The result reveals that two conformers are expected in liquid phase. Copyright © 2009 John Wiley & Sons, Ltd.     

Facile Synthesis of Gd(OH)3‐Doped Fe3O4 Nanoparticles for Dual‐Mode T1‐ and T2‐Weighted Magnetic Resonance Imaging Applications

The facile hydrothermal synthesis of polyethyleneimine (PEI)‐coated iron oxide (Fe₃O₄) nanoparticles (NPs) doped with Gd(OH)₃ (Fe₃O₄‐Gd(OH)₃‐PEI NPs) for dual mode T₁‐ and T₂‐weighted magnetic resonance (MR) imaging applications is reported. In this approach, Fe₃O₄‐Gd(OH)₃‐PEI NPs are synthesized via a hydrothermal method in the presence of branched PEI and Gd(III) ions. The PEI coating onto the particle surfaces enables further modification of poly(ethylene glycol) (PEG) in order to render the particles with good water dispersibility and improved biocompatibility. The formed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs have a Gd/Fe molar ratio of 0.25:1 and a mean particle size of 14.4 nm and display a relatively high r₂ (151.37 × 10^?3m ^?1 s^?1) and r₁ (5.63 × 10^?3m ^?1 s^?1) relaxivity, affording their uses as a unique contrast agent for T₁‐ and T₂‐weighted MR imaging of rat livers after mesenteric vein injection of the particles and the mouse liver after intravenous injection of the particles, respectively. The developed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs may hold great promise to be used as a contrast agent for dual mode T₁‐ and T₂‐weighted self‐confirmation MR imaging of different biological systems.     

Decay Dynamics of 3‐methyl‐3‐pentene‐2‐one from the light absorbing S2(ππ*) state ‐ Resonance Raman Spectroscopy and CASSCF Study

The photophysics of 3‐methyl‐3‐pentene‐2‐one (3M3P2O) after excitation to the S₂(ππ*) electronic state were studied using the resonance Raman spectroscopy and complete active space self‐consistent field (CASSCF) method calculations. The A‐band resonance Raman spectra were obtained in cyclohexane, acetonitrile, and methanol with excitation wavelengths in resonance with the first intense absorption band to probe the structural dynamics of 3M3P2O. The B3LYP‐TD/6‐31++G(d, p) computation was carried out to determine the relative A‐band resonance Raman intensities of the fundamental modes, and the result was used to reproduce the corresponding fundamental band intensities of the 223.1 nm resonance Raman spectrum and thus to examine whether the vibronic‐coupling existed in Franck‐Condon region or not. CASSCF calculations were carried out to determine the minimal singlet excitation energies of S_{1, FC}, S_1,min (nπ*), S_{2, FC}, S_2,min (ππ*), the transition energies of the conical intersection points S_n/S_π, S_n/S₀, and the optimized excited state geometries as well as the geometry structures of the conical intersection points. The A‐band short‐time structural dynamics and the corresponding decay dynamics of 3M3P2O were obtained by the analysis of the resonance Raman intensity pattern and CASSCF computations. It was revealed that the initial structural dynamics of 3M3P2O was towards the simultaneous C₃=C₄ and C₂=O₇ bond elongation, with the C₃=C₄ bond length lengthening greater at the very beginning, whereas the C₂=O₇ bond length changing greater at the later evolution time before reaching the CI(S₂/S₁) conical intersection point. The decay dynamics from S₂(ππ*) to S₁(nπ*) via S₂(ππ*)/S₁(nπ*) in singlet realm and from S₁(nπ*) to T₁(nπ*) via ISC[S₁(nπ*)/T₂(ππ*)/T₁(nπ*)] in triplet realm are proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

Tuning the absorption spectra and nonlinear optical properties of D‐π‐A azobenzene derivatives by changing the dipole moment and conjugation length: a theoretical study

The optical properties of several azobenzene derivatives were modulated by varying the dipole moments and conjugation lengths of the D‐π‐A systems. The relationship between the structure and absorption spectrum and polarizability was studied in the gas phase, THF and MeOH solutions, respectively, by using the density functional theory. The calculated absorption spectra and second‐order polarizabilities are in good agreement with the available experimental observations. In comparison with the D‐π‐A monomer, the H‐shaped D‐π‐A dimer almost doubles the dipole moments and hence increases the second‐order polarizabilities, without a significant shift in the maximum absorption bands. The addition of another azobenzol group between electron‐donating and ‐accepting groups increases the second‐order polarizabilities by 4–6 times, but leads to an evident red‐shift of about 65–80 nm in spectra. The relative second‐order polarizability of the halogen‐substituted derivatives is in the sequence of ? CF₃ > ? F > ? Cl > ? Br, without obvious substituent effects on the optical transparency. The D‐π‐A chromophores with the strong electron‐donating (amino) and ‐accepting (acetyl) substituent present the larger second‐order polarizabilities, at the cost of about 20 nm red‐shift of the maximum absorption lengths relative to the halogen‐substituted species. It is also demonstrated that both the linear and nonlinear optical properties augment with the increase in solvent polarity, accompanied by a red‐shift in the wavelengths of maximum absorption by about 18 and 23 nm, respectively, in THF and MeOH solutions. The changes in optical properties upon the structural modifications are further rationalized by the electronic structures of various H‐shaped dimers. Copyright © 2010 John Wiley & Sons, Ltd.     

Relative stabilities and molecular structures of the isomeric enol ethers and carboxylic esters derived from α‐acetyl‐γ‐butyrolactone and α‐acetyl‐δ‐valerolactone

Recently recorded ¹⁷O NMR spectra of compounds studied in a previous work (Taskinen E. Acta Chem. Scand. 1985; B39 : 489–494) dealing with the thermodynamics of isomerization of the enol ethers of α‐acetyl‐γ‐butyrolactone reveal an error in compound identification, caused by an unexpected isomerization reaction during the synthetic procedure. Thus, acid‐catalyzed treatment of the lactone with HC(OR)₃ in the respective alcohol ROH is shown to lead initially to the desired enol ethers which, however, are gradually isomerized to a mixture of the enol ethers and an ester of 2‐methyl‐4,5‐dihydrofuran‐3‐carboxylic acid. As a result, only one of the two isomeric compounds detected in the previous equilibration study was the expected enol ether (the thermodynamically more stable E isomer) of α‐acetyl‐γ‐butyrolactone, while the other, dominating species was the respective carboxylic ester. In the present work, the evidence provided by the ¹⁷O NMR spectra is presented, and the relative stabilities of the isomeric compounds are discussed on the basis of computational enthalpy data. The treatment is also extended to the respective isomeric compounds derived from α‐acetyl‐δ‐valerolactone. Copyright © 2007 John Wiley & Sons, Ltd.     

Isolation and characterization of conformational isomers of N,N′‐bis(3,5‐dichlorosalicylidene)‐2,2′‐ethylenedianiline: crystal structure,photoluminescence, and density functional theory calculation

We have isolated two isomeric solids 1 and 2 of N,N′‐bis(3,5‐dichlorosalicylidene)‐2,2′‐ethylenedianiline and characterized by IR, UV/Vis, X‐ray powder diffraction, thermogravimetric analysis/differential thermal analysis, and X‐ray crystallography. Although the solids are same formulas, each shows different colors and crystal structures. Orange solid ( 1 ) shows endo conformation while yellow solid ( 2 ) exhibits exo form depending on packing modes. UV/Vis spectra of 1 and 2 appear very similar patterns in the solid state; however, the bands of 1 are slightly red‐shifted compared with those of 2 . 1 displays a strong fluorescent emission band at ~582 nm while 2 shows an intense fluorescent signal at ~563 nm. The charge density populations of 1 and 2 have been studied by computational simulations using density functional theory at pbe1pbe/6‐311G** level. The calculated highest occupied molecular orbital and lowest unoccupied molecular orbital energies of 1 and 2 confirm that charge transfer occurs within the organic molecules. The energy difference of HOMO‐LUMO in 1 is smaller slightly than that of 2 about 0.05 eV (~17 nm). Copyright © 2014 John Wiley & Sons, Ltd.     

DFT study the interaction of β‐cyclodextrin with benzyl azide and phenyl acetylene in synthesis of 1,2,3‐triazoles

The phenyl acetylene and benzyl azide cycloaddition reaction in water in the presence of β‐cyclodextrin (β‐CD) as a phase transfer catalyst (PTC) can get a better yield in a shorter time. The interaction between β‐CD and phenyl acetylene or benzyl azide plays an important role in this reaction. This paper studies the complexes of β‐CD with phenyl acetylene and benzyl azide using density functional theory (DFT) method. In order to find out the orientations of guests in the cavity of β‐CD, binding energy and deformation energy are investigated, and the calculated results are confirmed by ¹H nuclear magnetic resonance (¹HNMR). The data from single point energy indicate that the inclusion complexes can improve the solubilities of phenyl acetylene and benzyl azide in water. The ¹³C and ¹⁵N spectra show that the most obvious variation concentrates on C₆ and C₈ of phenyl acetylene and N₁₅ of benzyl azide in complexes. Mulliken charge and frontier orbital are employed for revealing the charge distribution. The effect of β‐CD is discussed in terms of the calculated parameters. Copyright © 2014 John Wiley & Sons, Ltd.     

On the application of a single‐crystal κ‐diffractometer and a CCD area detector for studies of thin films

A multipurpose six‐axis κ‐diffractometer, together with the brilliance of the ESRF light source and a CCD area detector, has been explored for studying epitaxial relations and crystallinity in thin film systems. The geometrical flexibility of the six‐axis goniometer allows measurement of a large volume in reciprocal space, providing an in‐depth understanding of sample crystal relationships. By a set of examples of LaAlO₃ thin films deposited by the atomic layer deposition technique, the possibilities of the set‐up are presented. A fast panoramic scan provides determination of the crystal orientation matrices, prior to more thorough inspection of single Bragg nodes. Such information, in addition to a broadening analysis of families of single reflections, is shown to correlate well with the crystallinity, crystallite size, strain and epitaxial relationships in the thin films. The proposed set‐up offers fast and easy sample mounting and alignment, along with crucial information on key features of the thin film structures.     

Solvatochromism of 2‐(N,N‐dimethylamino)‐7‐nitrofluorene and the natural dye β‐carotene: application for the determination of solvent dipolarity and polarizability

The effects of solvents on chemical phenomena (rate and equilibrium constants, spectroscopic transitions, etc.) are conveniently described by solvation free‐energy relationships that take into account solvent acidity, basicity and dipolarity/polarizability. The latter can be separated into its components by manipulating the UV–vis spectra of two solvatochromic probes, 2‐(N,N‐dimethylamino)‐7‐nitrofluorene (DMANF) and a di‐(tert‐butyl)‐tetramethyl docosanonaen probe (ttbP9) whose synthesis is laborious and expensive. Recently, we have shown that the natural dye β‐carotene can be conveniently employed instead of ttbP9 for the determination of solvent polarizability (SP) of 76 molecular solvents and four ionic liquids. In the present work, we report the polarizabilities of further 24 solvents. Based on the solvatochromism of β‐carotene and DMANF, we have calculated solvent dipolarity (SD) for 103 protic and aprotic molecular solvents, and ionic liquids. The dependence of SD and SP on the number of carbon atoms in the acyl‐ or alkyl group of several homologous series (alcohols; 2‐alkoxyethanols; carboxylic acid‐ anhydrides, and esters, ionic liquids) is calculated and briefly discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

Kinetics and thermochemistry of the unusual [2π + 2σ + 2σ]‐cycloaddition of quadricyclane with some dienophiles

Kinetic parameters of the unusual [2π + 2σ + 2σ]‐cycloaddition reactions of quadricyclane ( 1 ) with tetracyanoethylene ( 2 ), 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione ( 3 ), N‐phenylmaleimide ( 4 ), and diethyl azodicarboxylate ( 5 ) are determined experimentally. Additionally, the enthalpies of 1  +  2 reaction in 1,4‐dioxane solution (?236.6 ± 1.0 kJ mol^?1) and 1  +  3 reaction in toluene (?255.0 ± 2.8 kJ mol^?1) are determined calorimetrically and shown to be the largest in absolute magnitude among all known cycloaddition reactions involving these dienophiles. Solvent effect on the rate of 1 + 3 reaction in 11 solvents is studied and found to be moderate and similar to that of the conventional Diels‐Alder and ene reactions. The difference in the reaction rate constants of 1 with different dienophiles can be up to 9 orders of magnitude and is mainly caused by the difference in activation enthalpies. This difference is not correlated with the standard enthalpies of reactions and is likely the result of high sensitivity of the [2π + 2σ + 2σ] reaction rates to the energy of donor‐acceptor interactions between the reactants.