Synthesis, structure and ethylene polymerization behavior of titanium phosphinoamide complexes

(Phosphinoamide)(cyclopentadienyl)titanium(IV) complexes of the type Cp*TiCl₂(η²-Ph₂PNR) [Cp*=C₅Me₅; R = t-Bu (2a), R = n-Bu (2b), R = Ph (2c)] have been prepared by the reaction of Cp*TiCl₃ with the corresponding lithium phosphinoamides. The structure of Cp*TiCl₂(η²-Ph₂PN^tBu) (2a) and Cp*TiCl₂(η²-Ph₂PNPh) (2c) have been determined by X-ray crystallography. These complexes exhibited moderate catalytic activities for ethylene polymerization in the presence of modified methylaluminoxane (MMAO). Catalytic activity of up to 2.5 × 10⁶ g/(mol Ti h) was observed when activated by i-Bu₃Al/Ph₃CB(C₆F₅)₄.     

Synthesis,structural characterization,and ethylene polymerization behavior of (arylimido)vanadium(V) complexes bearing tridentate Schiff base ligands

A series of novel (arylimido)vanadium(V) complexes bearing tridentate salicylaldiminato chelating ligands, V(N‐2,6‐Me₂C₆H₃)Cl₂[(O‐2‐^tBu‐4‐R‐C₆H₃)CH?ND] (R = H, D = 2‐CH₃O? C₆H₄ ( 2a ); 2‐CH₃S? C₆H₄ ( 2b ); 2‐Ph₂P? C₆H₄ ( 2c ); 8‐C₉H₆N (quinoline) ( 2d ); CH₂C₅H₄N ( 2e ); R = ^tBu, D = 2‐Ph₂P? C₆H₄ ( 2f )), were prepared from V(NAr)Cl₃ by reacting with 1.0 equiv of the ligands in the presence of triethylamine in tetrahydrofuran. These complexes were characterized by ¹H, ¹³C, ³¹P, and ⁵¹V NMR spectra and elemental analysis. The structures of 2c and 2f were further confirmed by X‐ray crystallographic analysis. These (arylimido)vanadium(V) complexes are effective catalyst precursors for ethylene polymerization in the presence of Et₂AlCl as a cocatalyst and ethyl trichloroacetate as a reactivating agent. Complex 2c with a ? PPh₂ group in the sidearm was found to exhibit an exceptional activity up to 133800 kg polyethylene/mol_V h for ethylene polymerization at 75 °C, which is one of the highest activities displayed by homogeneous vanadium(V) catalysts at high temperature. Moreover, high molecular weight polymers with unimodal molecular weight distribution can be obtained, indicating the single site behavior of these catalysts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2633‐2642     

Titanium complexes with novel triaryl-substituted phosphinimide ligands: Synthesis, structure and ethylene polymerization behavior

A series of titanium phosphinimide complexes [Ph₂P(2-RO-C₆H₄)]₂TiCl₂ (7, R = CH₃; 8, R = CHMe₂) and [PhP(2-Me₂CHO-C₆H₄)][THF]TiCl₃ (9) have been prepared by reaction of TiCl₄ with the corresponding phosphinimines under dehalosilylation. The structure of complex 9 has been determined by X-ray crystallography, and a solvent molecule THF was found to be coordinated with the central metal and the Ti-O bond was consistent with the normal Ti-O (donor) bond length. The complexes 7 and 8 displayed inactive to ethylene polymerization, and the complex 9 displayed moderate activity in the presence of modified methylaluminoxane (MMAO) or i-Bu₃Al/Ph₃CB(C₆F₅)₄, and this should be partly attributed to coordination of THF with titanium and the steric effect of two iso-propoxyl. And catalytic activity up to 32.2 kg-PE/(mol-Ti h bar) was observed.     

[N,N]-二齿镍配合物催化烯烃聚合

烯烃聚合催化剂的设计是烯烃配位聚合领域的一个核心科学问题,通过设计合成精确结构的催化剂可以有效地调控催化聚合性能以及聚合产物的结构.后过渡金属催化剂由于其易调变性、对聚合产物支化结构的可控性及对极性单体的容忍性,在烯烃聚合领域引起了广泛的关注.本文介绍了近年来本课题组在[N,N]-二齿镍烯烃聚合催化剂设计方面的研究进展,包括四元环的中性脒基镍催化剂、五元环的-二亚胺镍催化剂、2-胺基吡啶和-胺基亚胺系列镍催化剂,以及六元环的-二亚胺和苯胺基亚胺镍催化剂在烯烃聚合的应用.通过优化后过渡金属镍催化剂结构,可成功实施烯烃活性聚合.     

不对称二亚胺异双核钴镍催化剂的合成及乙烯聚合研究

合成了不对称异双核钴镍催化剂MN5CoNi.该催化剂经AlEt3,MMAO,AlEt3/[PhMe2NH][B(C6F5)4](B)或MMAO/B活化后用于乙烯聚合.异双核催化剂与相应的等摩尔双组分混合单核催化剂相比,以TEA作助催化剂时,异双核催化剂的Co和Ni中心的活性都远低于双组分混合体系,且Ni中心生成的聚乙烯含量低于双组分混合体系,异双核催化剂中的Co和Ni中心同时被抑制.以MMAO作助催化剂时,异双核催化剂的活性虽低于双组分混合体系,但是异双核催化剂中的两种金属中心的活性都有了较大的提高,且Ni中心生成的聚乙烯含量高于后者.同时考察了活性随时间变化,发现异双核催化剂中活性衰减比双组分混合体系慢,说明异双核体系中Co和Ni中心在MMAO活化下比双组分混合体系的金属中心更稳定.当以TEA/B作助催化剂时,异双核催化剂中Co和Ni中心的活性有所提高,但仍远低于双组分混合体系,且Ni中心生成的聚乙烯含量低于后者,说明Ni被选择性抑制.当使用MMAO/B作助催化剂时,结果与MMAO类似.     

Synthesis,characterization and ethylene polymerization by metallasilsesquioxane

Soluble complexes of group (IV) metallocenes anchored on a substituted polyhedral oligomeric silsesquioxane trisilanol support were prepared and characterized. These catalyst precursors formulated as [M(O^O^O)X] are found to be active in polymerization of ethylene at high temperature in combination with ethylaluminum sesquichloride (Et₃Al₂Cl_3, EASC) as co‐catalyst. The polyethylene obtained by these catalysts is linear, crystalline and displays narrow dispersity. The unique low molecular weight PE formed in this reaction exhibits properties comparable to commercial micronized PE waxes that have potential industrial applications in surface coating and ink formulations. Copyright © 2013 John Wiley & Sons, Ltd.     

A study of polyethylene-gr-2-tert-butyl amino methacrylate-supported TiCl4 catalyst for ethylene polymerization

The use of a polyethylene-based copolymer with dual functional groups (polyethylene-gr-2-tert-butyl amino ethyl methacrylate) as the support for TiCl₄ catalyst in ethylene polymerization was studied. Different methods for treating the support were examined and treatment with BuMgCl was found to be the most effective. With the BuMgCl-modified support, a 12-run Plackett-Burman design was used to screen 11 factors in catalyst preparation. Statistical analysis of the results from this design identified significant factors with the amount of BuMgCl singled out to be the most important one for the four response variables of interest, Mg loading, Ti loading, catalyst activity per gram catalyst, and catalyst activity per gram Ti. © 1996 John Wiley & Sons, Inc.     

Syntheses, characterization and ethylene polymerization of half-sandwich group IV metal complexes with tridentate [O,N,S] ligands

A series of half-sandwich group IV metal complexes with tridentate monoanionic phenoxy-imine arylsulfide [O NS] ligand [2-Bu t 4-Me-6-((2-(SC 6 H 5)C 6 H 4 N = CHC 6 H 2 O)](La) and dianionic phenoxy-amine arylsulfide [O N S] ligand [2-Bu t 4-Me-6-((2-(SC 6 H 5)C 6 H 4 N-CH 2 C 6 H 2 O)] 2(Lb) have been synthesized and characterized.Lb was obtained easily in high yield by reduction of ligand La with excess LiAlH 4 in cool diethyl ether.Half-sandwich Group IV metal complexes CpTi[O NS]Cl 2(1a),CpZr[O NS]Cl 2(1b),CpTi[O N S]Cl(2a),CpZr[O N S]Cl(2b) and Cp * Zr[O N S]Cl(2c) were synthesized by the reactions of La and Lb with CpTiCl 3,CpZrCl 3 and Cp * ZrCl 3,and characterized by IR,1 H-NMR,13 C-NMR and elemental analysis.In addition,an X-ray structure analysis was performed on ligand Lb.The title Group IV half-sandwich bearing tridentate [O,N,S] ligands show good catalytic activities for ethylene polymerization in the presence of methylaluminoxane(MAO) as co-catalyst up to 1.58 × 10 7 g-PE.mol-Zr 1.h 1.The good catalytic activities can be maintained even at high temperatures such as 100 ℃ exhibiting the excellent thermal stability for these half-sandwich metal pre-catalysts.     

Synthesis, structure and ethylene polymerization behavior of zirconium complexes with chelating ketoiminate ligands

Mixed ketoiminate/ketoimine/pentamethylcyclopentadienyl (Cp*) complex of zirconium, [(η⁵-Cp*){CH₃C(O)CHC(NHR)CH₃}{CH₃C(O)CHC(NR)CH₃}ZrCl₂] (R=4-CF₃Ph) (3) has been prepared in high yield by the reaction of one equivalent of 4-CF₃-phenyl-β-ketoimine (1a) and one equivalent of lithium 4-CF₃-phenyl-β-ketoiminate (2a) with one equivalent of Cp*ZrCl₃ in Et₂O. Bis(ketoiminate)zirconium dichloride complexes, 4 and 6, have been also prepared in high yield by the reaction of amine elimination of ketoimine ligands, respectively 1a and 1b, with Zr(NMe₂)₄ and followed by chlorination reaction with TMSCl. The X-ray crystallography reveals that the compound 3 is based on distorted octahedral geometry containing a ketoimine and a ketoiminate. The ketoiminate ligand coordinates to the zirconium as a bidentate ligand, leaving the metal center coordinatively unsaturated and thus leading to an additional binding of a ketoimine ligand to the metal to stabilize the complex 3. The zirconium complexes 3, 4 and 6 provide the moderate activity for the polymerization of ethylene in the presence of MMAO cocatalyst. Low molecular weight and high density polyethylene was obtained.     

Group 4 complexes bearing bis(salphen) ligands: Synthesis,characterization, and polymerization studies

Six different complexes containing bis(salphen) [salphen = N,N'‐phenylenebis(salicylideneimine)] ligands were synthesized and characterized by various spectroscopic techniques and elemental analysis. In the presence of benzyl alcohol as an initiator, all the complexes catalyze the ring‐opening polymerization of lactide and ε‐caprolactone, generating high molecular weight (M_n) polymers in a controlled fashion. The linear relationship between the % conversion and M_n proved the control over the polymerization process. The presence of OBn group as an end group was confirmed by MALDI‐TOF and ¹H NMR spectral analysis of low M_n oligomers. The polymerization followed first‐order kinetics as revealed by kinetic experiments. All the complexes were good precatalysts for the polymerization of ethylene. The effect of temperature and time on the yield and activity toward the polymerization of ethylene were widely investigated. In addition, in the presence of tetrabutylammonium bromide as cocatalyst, the formation of degradable polycarbonate with moderate M_n value and narrow molecular weight distributions was observed by the copolymerization of cyclohexene oxide with CO₂. The effect of initiator structure, temperature, CO₂ pressure, catalyst/cocatalyst loading on the activity, and selectivity toward copolymerization were systematically examined. The thermal properties of the copolymer synthesized were explored using differential scanning calorimetric and thermogravimetric analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 809–824     

Dichlorovanadium (IV) complexes with salen‐type ligands for ethylene polymerization

Vanadium complexes with tetradentate salen‐type ligands were first time explored in ethylene polymerizations. The effects of the vanadium complex structure, the alkyl aluminum cocatalysts type (EtAlCl₂, Et₂AlCl, Et₃Al, and MAO), and the polymerization conditions (Al/V molar ratio, temperature) on polyethylene yield were explored. It was found that EtAlCl₂ in conjunction with investigated vanadium complexes produced the most efficient catalytic systems. It was shown, moreover, that the structural changes of the tetradentate salen ligand (type of bridge which bond donor nitrogen atoms and type of substituent on aryl rings) affected activity of the catalytic system. The complexes containing ligands with cyclohexylene bridges were more active than those with ethylene bridges. Furthermore, the presence of electron‐withdrawing groups at the para position and electron‐donating substituents at the ortho position on the aryl rings of the ligands resulted in improved activity in relation to the systems with no substituents (with the exception of bulky t‐Bu group). The results presented also revealed that all vanadium complexes activated by common organoaluminum compounds gave linear polyethylenes with high melting points (134.8–137.6 °C), high molecular weights, and broad molecular weight distribution. The polymer produced in the presence of MAO possesses clearly lower melting point (131.4 °C) and some side groups (around 9/1000 C). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6940–6949, 2008     

Chromium complexes bearing disubstituted organophosphate ligands and their use in ethylene polymerization

The crystal structures of three unusual chromium organophosphate complexes have been determined, namely, bis(μ‐butyl 2,6‐di‐tert‐butyl‐4‐methylphenyl hydrogen phosphato‐κO:κO′)di‐μ‐hydroxido‐bis[(butyl 2,6‐di‐tert‐butyl‐4‐methylphenyl hydrogen phosphato‐κO)(butyl 2,6‐di‐tert‐butyl‐4‐methylphenyl phosphato‐κO)chromium](Cr—Cr) heptane disolvate or {Cr₂(μ₂‐OH)₂[μ₂‐PO₂(OBu)(O‐2,6‐^tBu₂‐4‐MeC₆H₂)‐κO:κO′]₂[PO₂(OBu)(O‐2,6‐^tBu₂‐4‐MeC₆H₂)‐κO]₂[HOPO(OBu)(O‐2,6‐^tBu₂‐4‐MeC₆H₂)‐κO]₂}·2C₇H₁₆, [Cr₂(C₁₉H₃₂O₄P)₄(C₁₉H₃₃O₄P)₂(OH)₂]·2C₇H₁₆, denoted ( 1 )·2(heptane), [μ‐bis(2,6‐diisopropylphenyl) phosphato‐1κO:2κO′]bis[bis(2,6‐diisopropylphenyl) phosphato]‐1κO,2κO‐chlorido‐2κCl‐triethanol‐1κ²O,2κO‐di‐μ‐ethanolato‐1κ²O:2κ²O‐dichromium(Cr—Cr) ethanol monosolvate or {Cr₂(μ₂‐OEt)₂[μ₂‐PO₂(O‐2,6‐ⁱPr₂‐C₆H₃)₂‐κO:κO′][PO₂(O‐2,6‐ⁱPr₂‐C₆H₃)₂‐κO]₂Cl(EtOH)₃}·EtOH, [Cr₂(C₂H₅O)₂(C₂₄H₃₄O₄P)₃Cl(C₂H₆O)₃]·C₂H₆O, denoted ( 2 )·EtOH, and di‐μ‐ethanolato‐1κ²O:2κ²O‐bis{[bis(2,6‐diisopropylphenyl) hydrogen phosphato‐κO][bis(2,6‐diisopropylphenyl) phosphato‐κO]chlorido(ethanol‐κO)chromium}(Cr—Cr) benzene disolvate or {Cr₂(μ₂‐OEt)₂[PO₂(O‐2,6‐ⁱPr₂‐C₆H₃)₂‐κO]₂[HOPO(O‐2,6‐ⁱPr₂‐C₆H₃)₂‐κO]₂Cl₂(EtOH)₂}·2C₆H₆, [Cr₂(C₂H₅O)₂(C₂₄H₃₄O₄P)₂(C₂₄H₃₅O₄P)₂Cl₂(C₂H₆O)₂]·2C₆H₆, denoted ( 3 )·2C₆H₆. Complexes ( 1 )–( 3 ) have been synthesized by an exchange reaction between the in‐situ‐generated corresponding lithium or potassium disubstituted phosphates with CrCl₃(H₂O)₆ in ethanol. The subsequent crystallization of ( 1 ) from heptane, ( 2 ) from ethanol and ( 3 ) from an ethanol/benzene mixture allowed us to obtain crystals of ( 1 )·2(heptane), ( 2 )·EtOH and ( 3 )·2C₆H₆, whose structures have the monoclinic P2₁, orthorhombic P2₁2₁2₁ and triclinic P space groups, respectively. All three complexes have binuclear cores with a single Cr—Cr bond, i.e. Cr₂O₆P₂ in ( 1 ), Cr₂PO₄ in ( 2 ) and Cr₂O₂ in ( 3 ), where the Cr atoms are in distorted octahedral environments, formally having 16 ē per Cr atom. The complexes have bridging ligands μ₂‐OH in ( 1 ) or μ₂‐OEt in ( 2 ) and ( 3 ). The organophosphate ligands demonstrate terminal κO coordination modes in ( 1 )–( 3 ) and bridging μ₂‐κO:κO′ coordination modes in ( 1 ) and ( 2 ). All the complexes exhibit hydrogen bonding: two intramolecular O_phos…H—O_phos interactions in ( 1 ) and ( 3 ) form two {H[PO₂(OR)₂]₂} associates; two intramolecular Cl…H—O_Et hydrogen bonds additionally stabilize the Cr₂O₂ core in ( 3 ); two intramolecular O_phos…H—O_Et interactions and two O…H—O intermolecular hydrogen bonds with a noncoordinating ethanol molecule are observed in ( 2 )·EtOH. The presence of both basic ligands (OH^? or OEt^?) and acidic [H(phosphate)₂]^? associates at the same metal centres in ( 1 ) and ( 3 ) is rather unusual. Complexes may serve as precatalysts for ethylene polymerization under mild conditions, providing polyethylene with a small amount of short‐chain branching. The formation of a small amount of α‐olefins has been detected in this reaction.     

Novel titanium complexes bearing two chelating phenoxy‐imine ligands and their catalytic performance for ethylene polymerization

Three substituted salicylaldimine ligands ( 1a, 2a, 3a ) and their titanium complexes bis[N‐(5‐nitrosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 1 ), bis[N‐(5‐chlorosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 2 ) and bis[N‐(5‐bromosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 3 ) were synthesized and characterized by mass spectra, ¹H NMR and elemental analyses, as well as complex 1 by X‐ray structure analysis. In the presence of methylaluminoxane (MAO), 1, 2 and 3 are efficient catalysts for ethylene polymerization in toluene. Under the conditions of T = 60 °C, p = 0.2 MPa, and n(MAO)/n(cat) = 1500, the activities of 1–3 reached 4.55–8.80 × 10⁶ g of PE (mol of Ti h bar)^?1, which is much higher than that of the unsubstituted complex bis[N‐(salicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 4 ). The viscosity‐average molecular weight of polyethylene ranged from 24.8 × 10⁴ to 44.9 × 10⁴ g/mol for 1–3 and the molecular weight distribution M_w/M_n from 1.85 to 2.34. The effects of reaction conditions on the polymerization were examined in detail. The increase in ethylene pressure and rise in polymerization temperature are favorable for 1–3 /MAO to rise the catalytic activity and the molecular weight of polyethylene. Copyright © 2007 John Wiley & Sons, Ltd.     

Transition metal complexes bearing 2,6-bis(imino)pyridyl:Synthesis, structure, ethylene polymerization/oligomerization studies

A series of new complexes {2,6-bis[1-((2-methyl-4-methoxyphenyl)imino)ethyl]pyri-dine}MCI2 [M=Fe(Ⅱ) (2), Co(Ⅱ) (3), Ni(Ⅱ) (4), Cu(Ⅱ) (5), Zn(Ⅱ) (6)] have been synthesized. At 25℃, using 500 equiv of methylaluminoxane (MAO), the activities of Fe(Ⅱ), Co(Ⅱ) catalysts can reach 4.02×106 g/mol-Fehatm for ethylene polymerization and 3.98×105 g/mol-Cohatm for ethylene oligomerization. The effects of polymerization conditions such as reaction temperature, Al/M molar ratio and time on the activity of catalyst have been explored.     

Synthesis, electronic structure, and ethylene polymerization activity of bis(imino)pyridine cobalt alkyl cations

A new spin on polymers: the title cations comprise low-spin Co(II) centers with neutral bis(imino)pyridine chelating ligands. These complexes serve as single-component ethylene polymerization catalysts and offer insight into the mechanism of chain growth and catalyst deactivation, which occurs by forming inactive cationic bis(imino)pyridine cobalt complexes with a diethyl ether ligand.     

Preparation, structure, and ethylene (co)polymerization behavior of Group IV metal complexes with an [OSSO]-carborane ligand

The synthesis of Group IV metal complexes that contain a tetradentate dianionic [OSSO]-carborane ligand [(HOC(6)H(2)tBu(2)-4,6)(2)(CH(2))(2)S(2)C(2 (B(10)H(10))] (1a) is described. Reactions of TiCl(4) and Ti(OiPr)(4) with the [OSSO]-type ligand 1a afford six-coordinated titanium complex [Ti(OC(6)H(2)tBu(2)-4,6)(2)(CH(2))(2)S(2)C(2)(B(10)H(10))Cl(2)] (2a) and four-coordinated titanium complex [Ti(OC(6)H(2)tBu(2)-4,6)(2)(CH(2))(2)S(2)C(2)(B(10)H(10))(OiPr)(2)] (2b), respectively. ZrCl(4) and HfCl(4) were treated with 1a to give six-coordinated zirconium complex [Zr(OC(6)H(2)tBu(2)-4,6)(2)(CH(2))(2)S(2)C(2)(B(10)H(10))Cl(2) (thf)(2)] (2c) and six-coordinated hafnium complex [Hf(OC(6)H(2)tBu(2)-4,6)(2)(CH(2))(2)S(2)C(2)(B(10)H(10))Cl(2)] (2d). All the complexes were fully characterized by IR, NMR spectroscopy, and elemental analysis. In addition, X-ray structure analyses were performed on complexes 2a and 2b and reveal the expected different coordination geometry due to steric hindrance effects. Extended X-ray absorption fine structure (EXAFS) spectroscopy was performed on complexes 2c and 2d to describe the coordination chemistry of this ligand around Zr and Hf. Six-coordinated titanium complex 2a showed good activity toward ethylene polymerization as well as toward copolymerization of ethylene with 1-hexene in the presence of methylaluminoxane (MAO) as cocatalyst (up to 1060 kg[mol(Ti)](-1) h(-1) in the case of 10 atm of ethylene pressure).     

Synthesis and characterization of titanium complexes bearing sulfoxide groups and their catalytic behaviors in ethylene homo- and copolymerization

<正>1 Experimental section 1.1 General information All manipulations of air- and/or moisture-sensitive compounds were performed under nitrogen atmosphere using standard Schlenk techniques. 1H NMR and 13 C NMR spectra were recorded on a Varian XL-300 MHz spectrometer with TMS as the internal standard. Mass spectra were obtained using a HP5959 A spectrometer. IR spectra were recorded using a Nicolet AV-360 spectrometer. Elemental analysis was performed by the Analytical Laboratory of Shanghai Institute of Organic Chemistry(CAS). Mn, Mw, and Mw/Mn values of polymers were determined with a Waters Alliance GPC 2000 series at     

Ethylene polymerization with novel phenoxy-imine catalysts bearing 4-vinylphenyl group

This contribution reports ethylene polymerization behavior of titanium complexes incorporating bis(phenoxyimine) ligands. Six phenoxy-imine Ti(IV) complexes {6-R1-2-[CH=N(2,6-difluoro-3,5-diR2-4-R3Ph)]C6H3O}2TiCl2(1: R1 = H, R2 = H, R3 = H; 2: R1 = H, R2 = H, R3 = 4-vinylphenyl; 3: R1 = CH3, R2 = H, R3 = H; 4: R1 = CH3, R2 = H, R3 = 4-vinylphenyl; 5: R1 = CH3, R2 = F, R3 = H; 6: R1 = CH3, R2 = F, R3 = 4-vinylphenyl) have been synthesized and evaluated for ethylene polymerization using dried MAO(simplified as DMAO) as cocatalyst. An obvious catalytic heterogeneity of Cat 2(Complex 2/DMAO) towards ethylene polymerization was observed, which was illustrated by decreased activity, multimodal molecular weight distribution and partially improved particle morphology comparing with Cat 1. Moreover, Cat 3 exhibits "living" characteristics in the process under certain conditions(25 °C, less than 20 min). Otherwise, the moderate to high ethylene polymerization activity of ca. 105-106 g PE/(mol Ti·h) and high molecular weight(Mw = 105-106) of polyethylene can be obtained by changing the skeleton structure of these complexes.     

苯基取代的环戊二烯基锆化合物的合成及催化乙烯聚合

一系列苯基取代的环戊二烯配体在甲苯中相继与丁基锂及ZrCl4作用，生成相 应的苯基取代的茂金属化合物，通过^1H NMR，MS和元素分析表征了化合物的分子 结构，并研究了在MAO（甲基铝氧烷的助催化下，化合物对乙烯聚合的催化性能， 结果发现单苯基取代茂金属化合物的催化活性和产物聚乙聚的分子量都随聚合温度 的升高而增大。     

Synthesis,structure and olefin polymerization catalysis of nickel(II) complexes bearing N,O-chelate ligands

Four β-ketoimine ligands (two series) were prepared through traditional condensation reactions of β-diketones with 2,6-substituted anilines. Reaction took place only at the cyclohexanone carbonyl rather than at the acetyl or benzoyl carbonyl, even if more than two equivalents of the amines were added. Consequently, four new moisture- and air-stable bis(β-ketoamino)nickel(II) complexes, Ni[2–CH₃C(O)C₆H₈(=NAr)]₂ (Ar?=?2, 6-iPr₂C₆H₃, (1); Ar?=?2, 6-Me₂C₆H₃, (2) and Ni[2–PhC(O)C₆H₈(=NAr)]₂ (Ar?=?2, 6-iPr₂C₆H₃, (3); Ar?=?2, 6-Me₂C₆H₃, (4) were obtained and characterized. The solid-state structures of complex 1, 2 and 3 have been determined by single-crystal X-ray diffraction. Additionally, these complexes can be applied as highly active catalyst precursors for vinyl polymerization of norbornene (NBE) after activation with methylaluminoxane (MAO).