The behavior of water entrapped in reverse micelles (RMs) formed by two catanionic ionic liquid‐like surfactants, benzyl‐n‐hexadecyldimethylammonium 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT‐BHD) and cetyltrimethylammonium 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT‐CTA), was investigated by using dynamic (DLS) and static (SLS) light scattering, FTIR, and 1H NMR spectroscopy techniques. To the best of our knowledge, this is the first report in which AOT‐CTA has been used to create RMs and encapsulate water. DLS and SLS results revealed the formation of RMs in benzene and the interaction of water with the RM interface. From FTIR and 1H NMR spectroscopy data, a difference in the magnitude of the water–catanionic surfactant interaction at the interface is observed. For the AOT‐BHD RMs, a strong water–surfactant interaction can be invoked whereas for AOT‐CTA this interaction seems to be weaker. Consequently, more water molecules interact with the interface in AOT‐BHD RMs with a completely disrupted hydrogen‐bond network, than in AOT‐CTA RMs in which the water structure is partially preserved. We suggest that the benzyl group present in the BHD+ moiety in AOT‐BHD is responsible for the behavior of the catanionic interface in comparison with the interface created in AOT‐CTA. These results show that a simple change in the cationic component in the catanionic surfactant promotes remarkable changes in the RMs interface with interesting consequences, in particular when using the systems as nanoreactors. 相似文献
Three novel ionic liquid (IL)-type polysiloxane bola surfactants (ATPS-MA, ATPS-EA, and ATPS-PA) were designed and synthesized using a two-step method. Their chemical structures were characterized by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (1H NMR) spectroscopy. Their surface activity and aggregation behavior in aqueous solution were systematically investigated by surface tension measurements, transmission electron microscopy (TEM), and dynamic light scattering (DLS). Surface activity measurement results indicated that the γCMC of the three IL-type polysiloxane surfactants are under 25 mN m?1, and much lower than those of conventional IL hydrocarbon bola surfactants due to the introduction of siloxane group at the end of the hydrophobic chains. TEM and DLS analyses results indicated that the three surfactants can self-assemble into spherical micelles with a range from 50 to 300?nm, indicating potential uses as model systems for biomembranes and vehicles for drug delivery. 相似文献
Employing bis(p‐sulfonatocalix[4]arenes) (bisSC4A) and N′,N′′hexamethylenebis(1‐methyl‐4,4′‐bipyridinium) (HBV4+) as monomer building blocks, the assembly morphologies can be modulated by cucurbit[n]uril (CB[n]) (n=7, 8), achieving the interesting topological conversion from cyclic oligomers to linear polymers. The binary supramolecular assembly fabricated by HBV4+ and bisSC4A units, forms an oligomeric structure, which was characterized by NMR spectroscopy, atomic force microscopy (AFM), transmission electron microscopy (TEM), dynamic light scattering (DLS), isothermal titration calorimetry (ITC), and gel permeation chromatography (GPC) experiments. The ternary supramolecular polymer participated by CB[8] is constructed on the basis of host–guest interactions by bisSC4A and the [2]pseudorotaxane HBV4+@CB[8], which is characterized by means of AFM, DLS, NMR spectroscopy, thermogravimetric analysis (TGA), UV/Vis spectroscopy, and elemental analysis. CB[n] plays vital roles in rigidifying the conformation of HBV4+, and reinforcing the host–guest inclusion of bisSC4A with HBV4+, which prompts the formation of a linear polymer. Moreover, the CB[8]‐participated ternary assembly could disassemble into the molecular loop HBV2+@CB[8] and free bisSC4A after reduction of HBV4+ to HBV2+, whereas the CB[7]‐based assembly remained unchanged after the reduction. CB[8] not only controlled the topological conversion of the supramolecular assemblies, but also improved the redox‐responsive assembly/disassembly property practically. 相似文献
Influence of the initiator and additional hydrophobic copolymer on the morphology of thermosensitive poly(N-isopropylacrylamide) (pNIPAM) microspheres, and their presumed application for the stabilization of biologically active molecules
were evaluated in this study. Three different types of pNIPAM were synthesized, applying various components: PN1 is a polymer
with terminal anionic groups resulting from potassium persulfate initiator; PN2 was synthesized with a 2,2′-azobis(2-methylpropionamidine)
dihydrochloride initiator introducing cationic amidine terminal groups; in the PN3 polymer, anionic terminals were implemented,
however, increased hydrophobicity was maintained using N-tert-butyl functional groups. Turbidity measurements of the obtained dispersions confirmed specific thermosensitivity of synthesized
microspheres in the range of 32–33°C. The polymerization course was proved by infrared spectroscopy and 1H NMR assessments, whereas the size of the synthesized microspheres, expressed as planar area, was evaluated by dynamic light
scattering (DLS), scanning electron microscopy (SEM) and optical microscopy (OM). The respective surface patterns of the freeze-dried
microspheres were evaluated by SEM. Planar area of the synthesized macromolecules was in the range between 0.41–3.22 μm, depending
on the substrates composition and the method applied for the measurements. The assessments performed in the dry stage gave
higher values of the diameter and planar area of the observed microspheres. The measured diameter and planar area increased
in the following order for the PN3 microspheres: DLS, OM, SEM. In the case of PN1 and PN2, the observed diameters were positioned
as: DLS, SEM, OM. These differences were assigned both to varied intramolecular hydrophobic-hydrophilic interactions of the
polymer chains and to the environment, i.e. low pressure in the SEM conditions and aqueous solvent in the DLS measurements.
The observed gaps in the freeze-dried PN2 polymer resulted in an attempt to evaluate the application of this polymer for mechanical
stabilization of certain macromolecules or nanocrystals in the size range between 10 nm and 20 nm. 相似文献
Herein, we report the effect of gold nanoparticles (GNPs) in enhancing lipase activity in reverse micelles of cetyltrimethylammonium bromide (CTAB)/water/isooctane/n‐hexanol. The size and concentration of the nanoparticles were varied and their specific roles were assessed in detail. An overall enhancement of activity was observed in the GNP‐doped CTAB reverse micelles. The improvement in activity becomes more prominent with increasing concentration and size of the GNPs (0–52 μM and ca. 3–30 nm, respectively). The observed highest lipase activity (k2=1070±12 cm3 g?1 s?1) in GNP‐doped CTAB reverse micelles ([GNP]: 52 μm, ca. 20 nm) is 2.5‐fold higher than in CTAB reverse micelles without GNPs. Improvement in the lipase activity is only specific to the GNP‐doped reverse micellar media, whereas GNP deactivates and structurally deforms the enzyme in aqueous media. The reason for this activation is probably due to the formation of larger‐sized reverse micelles in which the GNP acts as a polar core and the surfactants aggregate around the nanoparticle (‘GNP pool’) instead of only water. Lipase at the augmented interface of the GNP‐doped reverse micelle showed improved activity because of enhancement in both the substrate and enzyme concentrations and increased flexibility in the lipase conformation. The extent of the activation is greater in the case of the larger‐sized GNPs. A correlation has been established between the activity of lipase and its secondary structure by using circular dichroism and FTIR spectroscopic analysis. The generalized influence of GNP is verified in the reverse micelles of another surfactant, namely, cetyltripropylammonium bromide (CTPAB). TEM, dynamic light scattering (DLS), and UV/Vis spectroscopic analysis were utilized to characterize the GNPs and the organized aggregates. For the first time, CTAB‐based reverse micelles have been found to be an excellent host for lipase simply by doping with appropriately sized GNPs. 相似文献
A water-soluble monomer N1-(4-vinylbenzyl)-pentane-1,5-diamine dihydrochloride (VBPDA) with cadaverine (1,5-pentanediamine) group was synthesized. pH-responsive polymer with cadaverine group was obtained by free radical polymerization of VBPDA using 4,4-azobis(4-cyanovaleric acid) (ACVA) as the initiator. The structure and molecular weight of the polymer were characterized by FTIR, 1H-NMR and GPC-MALLS. Aggregation behavior of the polymer in aqueous solution was investigated by dynamic light scattering (DLS), UV-Vis and fluorescence measurements. The experimental results show that the fluorescence intensity of the aggregates decreases and the size of the aggregates increases with increasing pH due to the continuous dehydration of the cadaverine side groups. 相似文献
Soluble emeraldine-base (PANI-EB) was prepared and its structure was characterized using 1H, 13C and 2D (COSY, HMQC and HMBC) NMR. The solubility of the polymer in two solvents (N-methylpyrrolidone (NMP) and dimethyl sulfoxide (DMSO), the structure of the solution (aggregation) and the behavior of polyaniline were studied by viscometry and by dynamic light scattering (DLS) in dilute solution. Viscometric behavior in NMP and Huggins constant determination confirm supramolecular interactions also evidenced by DLS; at end, the molecular weight of the soluble fraction of PANI-EB is determined. 相似文献
Nanoscaled coordination polymers based on biologically prevalent ions have potential applications in drug delivery and biomedical imaging. Herein, coordination polymer nanoparticles of anionic porphyrins, including meso‐tetra(4‐carboxyphenyl)‐porphyrin (H2TCPP4?) and meso‐tetra(4‐sulfonatophenyl)‐porphyrin (H2TPPS4?), and alkaline or alkaline earth metal cations, such as K+ and Ca2+, were constructed in aqueous solution in the presence of cucurbit[7]uril (CB7) or cucurbit[8]uril (CB8). UV/Vis absorption and fluorescence spectroscopy, dynamic light scattering (DLS), scanning electron spectroscopy (SEM), and atomic force microscopy (AFM) were applied to explore the assembly and particle formation of porphyrin anions and metal cations mediated by CBn. The particle size depends on the kinds of CBn and metal cations and their concentrations. The uptake of H2TPPS4? particles by tumor cells (A549 cells) was found to be more efficient than H2TPPS4? at 37 °C, showing the application potential of such assembled particles in biology and medicine. 相似文献
We prepared core–shell polymer–silsesquioxane hybrid microcapsules from cage‐like methacryloxypropyl silsesquioxanes (CMSQs) and styrene (St). The presence of CMSQ can moderately reduce the interfacial tension between St and water and help to emulsify the monomer prior to polymerization. Dynamic light scattering (DLS) and TEM analysis demonstrated that uniform core–shell latex particles were achieved. The polymer latex particles were subsequently transformed into well‐defined hollow nanospheres by removing the polystyrene (PS) core with 1:1 ethanol/cyclohexane. High‐resolution TEM and nitrogen adsorption–desorption analysis showed that the final nanospheres possessed hollow cavities and had porous shells; the pore size was approximately 2–3 nm. The nanospheres exhibited large surface areas (up to 486 m2 g?1) and preferential adsorption, and they demonstrated the highest reported methylene blue adsorption capacity (95.1 mg g?1). Moreover, the uniform distribution of the methacryloyl moiety on the hollow nanospheres endowed them with more potential properties. These results could provide a new benchmark for preparing hollow microspheres by a facile one‐step template‐free method for various applications. 相似文献
The pharmaceutically important polymer P(MAA–r–MMA)1:2 (EUDRAGIT ® S100) was investigated concerning its behavior to form nanoparticles via nanoprecipitation. The particles obtained were characterized regarding their size, shape, and characteristics using DLS, SEM, and AUC. Furthermore, the P(MAA–r–MMA)1:2 copolymer was modified with different markers in order to achieve polymer‐based nanocarrier systems, which are detectable and may be useful for controlled drug delivery devices to monitor the drug pathways. The particles were labeled by physical entrapment as well as by covalent attachment of various markers, e.g., radicals, fluorescent‐, and near‐infrared dyes, to the polymer. Physical entrapment of radicals into the polymeric units was performed by co‐nanoprecipitation of P(MAA–r–MMA)1:2 and a radical marker. By means of covalent binding of the markers to the polymer, a stable and more defined labeling of the particles was also performed, leading only to a low degree of modification of the pharmaceutical polymer. After nanoprecipitation, the resulting labeled particles were characterized by SEM and DLS, whereas their biocompatibility was proven by in vitro studies. In order to ensure the possibility of detection of the particles inside the body for drug delivery‐, sensor‐, and imaging applications, the polymeric carriers were also investigated by electron spin resonance, fluorescence, as well as near‐infrared spectroscopy.