Synthesis and spectral studies of diorganotin(IV) dialkyldithiophosphates

Two series of diorganotin(IV) dialkyldithiophosphates, [RR′Sn{SSP(OR″)₂}₂](R = Me or Et; R′= Ph; R″ = Et, Prⁿ, Prⁱ or Buⁿ) and [RR′Sn(Cl){SSP(OR″)₂}] (R = R′= Me, Et or Ph; R″ = Ph; R″ = Et, Prⁱ or Buⁿ) were prepared and characterised by i.r. and NMR (¹H, ¹³C, ³¹P, ¹⁹⁹Sn) spectroscopy. The NMR data indicate five and six coordinate geometries for [RR′Sn(Cl){SSP(OR″)₂}] and [RR′Sn{SSP(OR″)₂}₂] complexes, respectively. The chloro complexes showed ²J (PSn) whereas such couplings were not observed in the spectra of [RR′Sn{SSP(OR″)₂}₂].     

O-Alkyl Trithiophosphate Derivatives of Triorganotin(IV) and S-Alkyl Trithiophosphate Derivatives of Diorganotin(IV) Chloride

Reactions of triorganotin chlorides with potassium salt of O-alkyl trithiophosphate [ROP(S)(SK)₂; R = Me, Prⁱ, Ph] in 2:1 molar ratio in anhydrous benzene yield triorganotin O-alkyl trithiophosphate of the type ROP(S) [SSnR′₃]₂ R = Me, Prⁱ; Ph, R′ = Prⁿ, Buⁿ, Ph] which are found to be monomeric in nature. These complexes are soluble in common organic solvents. Similar reactions of diorganotin chloride with dipotassium salt of S-alkyl trithiophosphate yield diorganotin-S-alkyl trithiophosphate of the type [(RS)P(O)S₂]₂SnR′₂; R = Me, Prⁱ; R′ = Me, Et, Ph, which also are found to be monomeric in nature and are soluble in common organic solvents. The newly synthesized derivatives have been characterized by physicochemical and spectroscopic techniques, IR, NMR (¹H, ³¹P, and ¹¹⁹Sn).     

Synthesis,Spectroscopic Studies,and Antifungal Activity of Tris(O-Alkyl or O-Aryltrithiophosphato) Aluminum(III)

Abstract

Aluminum(III) derivatives of O-alkyl or O-aryl trithiophosphate of the type Al[S₂P(SH)OR]₃ (R = Me, Et, Prⁱ, Buⁱ, Ph, CH₂Ph) have been synthesized. The products were obtained as white powdery solids. The monomers are soluble in common organic solvents and were characterized by elemental analyses, molecular weight determinations, and IR and (¹H, ²⁷Al, and ³¹P) NMR spectroscopic studies, which are consistent with six coordinated aluminum and bidentate behavior of the trithiophosphate moiety. The products also exhibit antifungal effectiveness against powdery mildew disease.     

Two‐Coordinate Magnesium(I) Dimers Stabilized by Super Bulky Amido Ligands

A variety of very bulky amido magnesium iodide complexes, LMgI(solvent)_0/1 and [LMg(μ‐I)(solvent)_0/1]₂ (L=‐N(Ar)(SiR₃); Ar=C₆H₂{C(H)Ph₂}₂R′‐2,6,4; R=Me, Prⁱ, Ph, or OBu^t; R′=Prⁱ or Me) have been prepared by three synthetic routes. Structurally characterized examples of these materials include the first unsolvated amido magnesium halide complexes, such as [LMg(μ‐I)]₂ (R=Me, R′=Prⁱ). Reductions of several such complexes with KC₈ in the absence of coordinating solvents have afforded the first two‐coordinate magnesium(I) dimers, LMg?MgL (R=Me, Prⁱ or Ph; R′=Prⁱ, or Me), in low to good yields. Reductions of two of the precursor complexes in the presence of THF have given the related THF adduct complexes, L(THF)Mg?Mg(THF)L (R=Me; R′=Prⁱ) and LMg?Mg(THF)L (R=Prⁱ; R′=Me) in trace yields. The X‐ray crystal structures of all magnesium(I) complexes were obtained. DFT calculations on the unsolvated examples reveal their Mg?Mg bonds to be covalent and of high s‐character, while Ph???Mg bonding interactions in the compounds were found to be weak at best.     

Ein‐ und zweikernige Rhodiumkomplexe mit Arsino(phosphino)methanen in unterschiedlichen Koordinationsformen

Mono‐ and Dinuclear Rhodium Complexes with Arsino(phosphino)methanes in Different Coordination Modes The cyclooctadiene complex [Rh(η⁴‐C₈H₁₂)(κ²‐tBu₂AsCH₂PiPr₂)](PF₆) ( 1a ) reacts with CO and CNtBu to give the substitution products [Rh(L)₂(κ²‐tBu₂AsCH₂PiPr₂)](PF₆) ( 2 , 3 ). From 1a and Na(acac) in the presence of CO the neutral compound [Rh(κ²‐acac)(CO)(κ‐P‐tBu₂AsCH₂PiPr₂)] ( 4 ) is formed. The reactions of 1a , the corresponding B(Ar_F)₄‐salt 1b and [Rh(η⁴‐C₈H₁₂)(κ²‐iPr₂AsCH₂PiPr₂)](PF₆) ( 5 ) with acetonitrile under a H₂ atmosphere affords the complexes [Rh(CH₃CN)₂(κ²‐R₂AsCH₂PiPr₂)]X ( 6a , 6b , 7 ), of which 6a (R = tBu; X = PF₆) gives upon treatment with Na(acac‐f₆) the bis(chelate) compound [Rh(κ²‐acac‐f₆)(κ²‐tBu₂AsCH₂PiPr₂)] ( 8 ). From 8 and CH₃I a mixture of two stereoisomers of composition [Rh(CH₃)I(κ²‐acac‐f₆)(κ²‐tBu₂AsCH₂PiPr₂)] ( 9/10 ) is generated by oxidative addition, and the molecular structure of the racemate 9 has been determined. The reactions of 1a and 5 with CO in the presence of NaCl leads to the formation of the “A‐frame” complexes [Rh₂(CO)₂(μ‐Cl)(μ‐R₂AsCH₂PiPr₂)₂](PF₆) ( 11 , 12 ), which have been characterized crystallographically. From 11 and 12 the dinuclear substitution products [Rh₂(CO)₂(μ‐X)(μ‐R₂AsCH₂PiPr₂)₂](PF₆) ( 13 ‐ 16 ) are obtained by replacing the bridging chloride for bromide, hydride or hydroxide, respectively. While 12 (R = iPr) reacts with NaI to give the related “A‐frame” complex 18 , treatment of 11 (R = tBu) with NaI yields the mononuclear chelate compound [RhI(CO)(κ²‐tBu₂AsCH₂PiPr₂)] ( 20 ). The reaction of 20 with CH₃I affords the acetyl complex [RhI₂{C(O)CH₃}(κ²‐tBu₂AsCH₂PiPr₂)] ( 21 ) with five‐coordinate rhodium atom.     

The First Butyltin(IV) Homo- and Heterobimetallic Diethanolaminates

Equimolar reactions of BuSn(OPrⁱ)₃ with diethanolamines, RN(CH₂CH₂ OH) ₂ (abbreviated as RdeaH₂, where R = H or Me), afford dimeric isopropoxo-bridged six-coordinate butyltin(IV) complexes [{Bu(η³-Rdea)Sn(μ-OPrⁱ)}₂] (R = H ( 1 ), Me ( 2 )). Interactions between BuSn(OPrⁱ)₃ and diethanolamines (RdeaH₂) in a 1:2 molar ratio yield monomeric derivatives of the type [BuSn(Rdea)(RdeaH)] (R = H ( 3 ), R = Me ( 4 )). These homometallic complexes on 1:1 reactions with an appropriate metal alkoxide form monomeric heterobimetallic complexes of the type [BuSn (Rdea)₂ {M(OR′)_n}] (R = H, M = Al, R′ = Prⁱ, n = 2 ( 5 ); R = H, M = Ti, R = Prⁱ, n = 3 ( 6 ); R = H, M = Zr, R′ = Prⁱ, n = 3 ( 7 ); R = Me, M = Al, R′ = Prⁱ, n = 2 ( 8 ); R = Me, M = Ti, R′ = Prⁱ, n = 3 ( 9 ); R = Me, M = Ge, R′ = Et, n = 3 ( 10 )). The driving force behind this work was (i) to explore the utility of homometal complexes ( 1 ) –( 4 ) in assembling a metal alkoxide fragment via a condensation reaction and (ii) to gain insights into the structures of new compounds by NMR spectral data. All of these derivatives have been characterized by elemental analysis, spectroscopic (IR, NMR; ¹H, ²⁷Al, and ¹¹⁹Sn) studies, and molecular weight measurements. ¹¹⁹Sn NMR spectral studies indicate that both the homometallic ( 3 ) and ( 4 ) and heterobimetallic ( 5 ) – ( 9 ) complexes exist in a solution in an equilibrium of six- and five-coordinated tin(IV) species.     

Synthetic,spectroscopic, thermal,and structural studies of antimony(III) bis(pyrrolidinedithiocarbamato)alkyldithiocarbonates

An account of the synthesis, spectroscopic, thermal and structural behavior of antimony(III) bis(pyrrolidinedithiocarbamato)alkyldithiocarbonates is presented. The reaction of antimony(III) bis(pyrrolidinedithiocarbamate) chloride with potassium organodithiocarbonate in equimolar ratio yielded the corresponding mixed derivatives of the type [(CH₂)₄NCS₂]₂SbS₂COR [where R = Me, Et, Pr ⁿ , Pr ⁱ , Bu ⁿ , and Bu ⁱ ]. These newly synthesized complexes have been characterized by physicochemical [molecular weight determination, melting points, and elemental analysis], spectral [UV, IR, far-IR, NMR (¹H and ¹³C)], thermal [TG, DTA, and FAB⁺ mass], and structural [powder XRD and SEM] studies. Analytical studies leads to purity and structural properties of the synthesized complexes on the other hand powder X-ray diffraction and SEM studies show that multiphase, polycrystalline, and rod-shaped complexes have been formed having nanorange crystallite size and monoclinic crystal system.     

SYNTHESIS AND CHARACTERIzATION OF TRIPHENYLANTIMONY (V) (O-ALKYL,O-CYCLOALKYL AND O-ARYLTRITHIOPHOSPHATES)

Triphenylantimony (V) (O-alkyl,O-cycloalkyl and O-aryltrithiophosphates) of the type Ph ₃ Sb[S ₂ (S)P(OR)] (R = Me, Et, Pr ⁿ , Pr ⁱ , Bu ⁿ , Bu ^s , Bu ⁱ , Am ⁱ , Ph and C.h. = cyclohexyl) have been synthesized for the first time by the reaction of triphenylantimony (V) dibromide with potassium trithiophosphates in 1:1 molar ratio in methanol. These new compounds have been characterized by elemental analysis, molecular weight determinations, and spectroscopic (IR,¹³C and ³¹P NMR) studies. On the basis of these data trigonal bipyramidal geometry has been proposed for these compounds.     

Synthetic,spectral as well as in vitro antimicrobial studies on some bismuth(III) bis(N,N‐dialkyldithiocarbamato) alkylenedithiophosphates

Mixed sulfur donor ligand complexes of the type bismuth(III) bis(N,N‐dialkyldithiocarbamato) alkylenedithiophosphate, [R₂NCS₂]₂BiS₂POGO [where R = CH₃ and C₂H₅; G = ‐CH₂‐C(C₂H₅)₂‐CH₂‐, ‐CH₂‐C(CH₃)₂‐CH₂‐, ‐CH(CH₃)‐CH(CH₃)‐ and ‐C(CH₃)₂‐C(CH₃)₂‐] were synthesized in 1:1 molar ratio of bismuth(III) bis(N,N‐dialkyldithiocarbamate) chloride and ammonium alkylenedithiophosphate in refluxing benzene and characterized by melting point, molecular weight determinations, elemental analysis (C, H, N, Bi and S) and spectral [UV, IR,NMR (¹H,¹³C and ³¹P) and powder X ray diffraction] studies; all these studies were in good agreement with the synthesized complexes. These newly synthesized derivatives are yellow and brown colored solids and are soluble in common organic solvents like benzene, chloroform, dichloromethane and DMF. Based on the physicochemical and spectral studies, a tentative structure of these newly synthesized complexes was assigned and the average particle size of the synthesized complexes determined by powder XRD, showing that nano range polycrystalline particles were formed with a monoclinic crystal system. These complexes were also screened for their antimicrobial activities using the well diffusion method. The free ligands as well as their mixed metal complexes were tested in vitro against four bacterial strains: two Gram‐positive, Staphylococcus aureus (ATCC 9144) (G⁺) and Bacillus subtilis (ATCC 6051), (G⁺) and two Gram‐negative, Escherichia coli (ATCC 9637) (G^?) and Pseudomonas aeruginosa (ATCC 25619) (G^?) to assess their antimicrobial properties. The results were indeed positive and exhibited good antibacterial effects. Chloroamphenicol used as a standard for comparison and synthesized complexes showed good antibacterial effects over chloroamphenicol. On the basis of these studies, the synthesized complexes help to understand the different structural and biological properties of main group elements with sulfur donor ligands. Copyright © 2010 John Wiley & Sons, Ltd.     

Charge Effects in PCP Pincer Complexes of NiII bearing Phosphinite and Imidazol(i)ophosphine Coordinating Jaws: From Synthesis to Catalysis through Bonding Analysis

This contribution reports on a new family of Ni^II pincer complexes featuring phosphinite and functional imidazolyl arms. The proligands ^RPIMC^HOP^R′ react at room temperature with Ni^II precursors to give the corresponding complexes [(^RPIMCOP^R′)NiBr], where ^RPIMCOP^R=κ^P,κ^C,κ^P‐{2‐(R′₂PO),6‐(R₂PC₃H₂N₂)C₆H₃}, R=iPr, R′=iPr ( 3 b , 84 %) or Ph ( 3 c , 45 %). Selective N‐methylation of the imidazole imine moiety in 3 b by MeOTf (OTf=OSO₂CF₃) gave the corresponding imidazoliophosphine [(^iPrPIMIOCOP^iPr)NiBr][OTf], 4 b , in 89 % yield (^iPrPIMIOCOP^iPr=κ^P,κ^C,κ^P‐{2‐(iPr₂PO),6‐(iPr₂PC₄H₅N₂)C₆H₃}). Treating 4 b with NaOEt led to the NHC derivative [(NHCCOP^iPr)NiBr], 5 b , in 47 % yield (NHCCOP^iPr=κ^P,κ^C,κ^C‐{2‐(iPr₂PO),6‐(C₄H₅N₂)C₆H₃)}). The bromo derivatives 3–5 were then treated with AgOTf in acetonitrile to give the corresponding cationic species [(^RPIMCOP^R)Ni(MeCN)][OTf] [R=Ph, 6 a (89 %) or iPr, 6 b (90 %)], [(^RPIMIOCOP^R)Ni(MeCN)][OTf]₂ [R=Ph, 7 a (79 %) or iPr, 7 b (88 %)], and [(NHCCOP^R)Ni(MeCN)][OTf] [R=Ph, 8 a (85 %) or iPr, 8 b (84 %)]. All new complexes have been characterized by NMR and IR spectroscopy, whereas 3 b , 3 c , 5 b , 6 b , and 8 a were also subjected to X‐ray diffraction studies. The acetonitrile adducts 6 – 8 were further studied by using various theoretical analysis tools. In the presence of excess nitrile and amine, the cationic acetonitrile adducts 6 – 8 catalyze hydroamination of nitriles to give unsymmetrical amidines with catalytic turnover numbers of up to 95.     

First Copper(I) and Silver(I) Complexes Containing Phosphanylphosphido Ligands

Three new complexes with phosphanylphosphido ligands, [Cu₄{μ₂‐P(SiMe₃)‐PtBu}₄] ( 1 ), [Ag₄{μ₂‐P(SiMe₃)‐PtBu₂}₄] ( 2 ) and [Cu{η¹‐P(SiMe₃)‐PiPr₂}₂]^–[Li(Diglyme)₂]⁺ ( 3 ) were synthesized and structurally characterized by X‐ray diffraction, NMR spectroscopy, and elemental analysis. Complexes 1 and 2 were obtained in the reactions of lithium derivative of diphosphane tBu₂P‐P(SiMe₃)Li · 2.7THF with CuCl and [iBu₃PAgCl]₄, respectively. The X‐ray diffraction analysis revealed that the complexes 1 and 2 present macrocyclic, tetrameric form with Cu₄P₄ and Ag₄P₄ core. Complex 3 was prepared in the reaction of CuCl with a different derivative of lithiated diphosphane iPr₂P‐P(SiMe₃)Li · 2(Diglyme). Surprisingly, the X‐ray analysis of 3 revealed that in this reaction instead of the tetramer the monomeric form, ionic complex [Cu{η¹‐P(SiMe₃)‐PiPr₂}₂]^–[Li(Diglyme)₂]⁺ was formed.     

Uranyl(VI) and lanthanum(III) thio-diglycolamides complexes: Synthesis and structural studies involving nitrate complexation

New tri-functional ligands of the type R₂NCOCH₂SCH₂CONR₂ (where R = iso-propyl, n-butyl or iso-butyl) were prepared and characterized. The coordination chemistry of these ligands with uranyl and lanthanum(III) nitrates was studied by using the IR, ¹HNMR and elemental analysis methods. Structures for the compounds [UO₂(NO₃)₂(ⁱPr₂NCOCH₂SCH₂CONⁱPr₂)] [UO₂(NO₃)₂(ⁱBu₂NCOCH₂SCH₂CONⁱBu₂)], [La(NO₃)₃(ⁱPr₂NCOCH₂SCH₂CONⁱPr₂)₂] and [La(NO₃)₃(ⁱBu₂NCOCH₂SCH₂CONⁱBu₂)₂] were determined by single crystal X-ray diffraction. These structures show that the ligand acts as a bidentate chelating ligand and bonds through both the carbamoyl groups to the uranyl and lanthanum(III) nitrate groups. Solvent extraction studies show that the ligand can extract the uranyl ion from the nitric acid medium but does not show any ability to extract the americium (III) ion.     

Synthesis and Properties of Mixed Ligand Complexes of Diorganotin(IV): Part(VII) – Synthesis and Characterisation of Some Antibacterial Dibenzoylmethane Diorganotin(IV)‐O‐alkyl Trithiophosphates

A series of some new mixed ligand complexes have been synthesized with an objective for evaluation as antimicrobials. Reactions of diorganotin(IV) dichloride with dibenzoyl methane and O‐alkyl trithiophosphates in a 1:1:1 molar ratio in refluxing benzene yield products of the type [PhCOCHCOPh]R₂Sn‐[SSH(S)POR'] [where R = Me, Bu, Ph; R' = Me, Et, Prⁱ, Buⁱ, Ph]. The newly synthesized complexes are light yellow colored crystalline solids, non‐volatile, soluble in common organic solvents, monomeric in nature and highly sensitive towards atmospheric moisture. These complexes are characterized by elemental analysis, IR and multinuclear NMR (¹H, ³¹P and ¹¹⁹Sn) spectral studies. Spectral studies of these complexes indicate that dibenzoyl methane and O‐alkyl trithiophosphate moieties are bidentate and the central tin atom is hexacoordinated in nature. A few of these compounds were tested for their antibacterial activity using standard drugs.     

The antispermatogenic activity of some phenylbismuth(III) O,O′‐dialkyldithiophosphates

Ten dialkyldithiophosphate derivatives of phenylbismuth(III) of the type, Ph_(3–n)Bi[S(S)P(OR)₂]_n [where n = 1; R = Me( 1 ), Et( 2 ), Pri( 3 ), Prⁿ( 4 ) and Buⁿ( 5 ); n = 2; R = Me( 6 ), Et( 7 ), Prⁱ( 8 ), Prⁿ( 9 ) and Buⁿ( 10 )] have been synthesized by the reactions of triphenylbismuth(III) with corresponding dialkyldithiophosphoric acids in 1:1 and 1:2 stoichiometric ratios, respectively, in stirred benzene solution. The newly synthesized brown colored compounds, 1–10 have been characterized by elemental analyses, molecular weight measurements, IR and NMR (¹H, ¹³C and ³¹P) spectral studies. The ligand diethyldithiophosphoric acid, [(C₂H₅O)₂P(S)SH], and its organobismuth(III) derivatives, compounds 2 and 7 were administered to adult male rats by oral gavage at the dose of 25 mg per kg body weight per day, for 60 days, and their effects were evaluated and compared for changes in testicular morphology, circulatory concentrations of testosterone, FSH and LH, sperm dynamics, fertility index and testicular cell population dynamics. Copyright © 2007 John Wiley & Sons, Ltd.     

Nickel Tetracarbonyl as Starting Material for the Synthesis of NHC-stabilized Nickel(II) Allyl Complexes

A novel, useful in situ synthesis for NHC nickel allyl halide complexes [Ni(NHC)(η³-allyl)(X)] starting from [Ni(CO)₄], NHC and allyl halides is presented. The reaction of [Ni(CO)₄] with (i) one equivalent of the corresponding NHC and (ii) with an excess of the corresponding allyl chloride at room temperature leads with elimination of carbon monoxide to complexes of the type [Ni(NHC)(η³-allyl)(X)]. This approach was used to synthesize the complexes [Ni(tBu₂Im)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 2 ), [Ni(iPr₂Im^Me)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 3 ), [Ni(iPr₂Im)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 4 ), [Ni(iPr₂Im)(η³-H₂C -C (H)-C (Me)₂)(Br)] ( 5 ), [Ni(Me₂Im^Me)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 6 ), and [Ni(EtiPrIm^Me)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 7 ). The complexes 1 to 7 were characterized using NMR and IR spectroscopy and elemental analysis, and the molecular structures are provided for 2 and 7 . The allyl nickel complexes 1 – 7 are stereochemically non-rigid in solution due to (i) NHC rotation about the nickel-carbon bond, (ii) allyl rotation about the Ni–η³-allyl axis and (iii) π–σ–π allyl isomerization processes. The allyl halide complexes can be methylated as was demonstrated by the methylation of a number of the complexes [Ni(NHC)(η³-allyl)(X)] with methylmagnesium chloride or methyllithium, which led to isolation of the complexes [Ni(Me₂Im)(η³-H₂C -C (Me)-C H₂)(Me)] ( 8 ), [Ni(tBu₂Im)(η³-H₂C -C (Me)-C H₂)(Me)] ( 9 ), [Ni(iPr₂Im^Me)(η³-H₂C -C (Me)-C H₂)(Me)] ( 10 ), [Ni(iPr₂Im)(η³-H₂C -C (Me)-C H₂)(Me)] ( 11 ), [Ni(iPr₂Im)(η³-H₂C -C (H)-C (Me)₂)(Me)] ( 12 ), and [Ni(EtiPrIm^Me)(η³-H₂C -C (Me)-C H₂)(Me)] ( 13 ). These complexes were fully characterized including X-ray molecular structures for 10 and 11 .     

Effect of substituents on the catalytic properties of bis(cyclopentadienyl)zirconium dichloride complexes with polymethylaluminoxane and AlBu1 3/CPh3B(C6F5)4 cocatalysts in ethylene polymerization

The catalytic properties of the complexes (RCp)₂ZrCl₂ (R=H, Me, Prⁱ, Buⁿ, Buⁱ, Me₃Si,cyclo-C₆H₁₁), and Me₂SiCp^*NBuⁱZrCl₂ (Cp^*=C₅(CH₃)₄) combined with the AlBuⁱ ₃−CPh₃B(C₆F₅)₄ cocatalyst in ethylene polymerization were studied. The specific activity of the substituted bis-cyclopentadienyl complexes decreases in the sequence: Me>Prⁱ>Buⁿ>Buⁱ>Me₃Si>cyclo-C₆H₁₁, which corresponds to the activity sequence for these complexes activated by polymethylaluminoxane (MAO) but is 4–20 times lower in absolute value. Comparison of the polyethylene samples obtained in the presence of the same complexes with MAO and AlBuⁱ ₃−CPh₃B(C₆F₅)₄ cocatalysts showed that polyethylene with much higher molecular mass, melting point, and crystallinity is formed in the presence of the ternary catalytic systems, and this indicates a different nature of the active sites of the catalytic systems. The effective activation energy of polymerization (≈3.6 kcal mol⁻¹), first order with respect to monomer and ≈0.4 order with respect to organoaluminum component, was found for the (PrⁱCo)₂ZrCl₂−AlBuⁱ ₃−CPh₃B(C₆F₅)₄ catalytic system. It was proposed on the basis of the kinetic data that AlⁱBu₃ enters into the composition of the active site to form a bridged heteronuclear cationic complex. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp 301–307, February, 2000.     

Synthesis,Characterization, and Sol-Gel Behavior of Dichlorotitanium(IV) (O-Alkyl,O-Cycloalkyl,and O-Aryl Trithiophosphates)

Dichlorotitanium(IV) trithiophosphates of the type TiCl₂[(RO)P(S)S₂] (where R = Me, Et, Prⁿ, Prⁱ, Buⁿ, Bu^s, Buⁱ, Amⁱ, Ph and cyclohexyl) have been synthesized for the first time by the reaction of titanium tetrachloride with potassium trithiophosphates in a 1:1 molar ratio in anhydrous benzene. Sol-gel chemistry of these titanium(IV) compounds has been studied in dry benzene by treatment with hydrogen sulfide gas. These newly synthesized derivatives have been characterized by elemental analysis (C, H, S, Cl, and Ti), molecular weight measurement, and spectral [IR and multinuclear NMR (¹H, ¹³C, and ³¹P)] studies. The bonding mode of trithiophosphate ligands and tentative structure around titanium(IV) are discussed.     

Synthese,Struktur und Photochemie von Olefiniridium(I)‐Komplexen mit Acetylacetonatoliganden

Synthesis, Structure, and Photochemical Behavior of Olefine Iridium(I) Complexes with Acetylacetonato Ligands The bis(ethene) complex [Ir(κ²‐acac)(C₂H₄)₂] ( 1 ) reacts with tertiary phosphanes to give the monosubstitution products [Ir(κ²‐acac)(C₂H₄)(PR₃)] ( 2 – 5 ). While 2 (R = iPr) is inert toward PiPr₃, the reaction of 2 with diphenylacetylene affords the π‐alkyne complex [Ir(κ²‐acac)(C₂Ph₂)(PiPr₃)] ( 6 ). Treatment of [IrCl(C₂H₄)₄] with C‐functionalized acetylacetonates yields the compounds [Ir(κ²‐acacR^1,2)(C₂H₄)₂] ( 8 , 9 ), which react with PiPr₃ to give [Ir(κ²‐acacR^1,2)(C₂H₄)(PiPr₃)] ( 10 , 11 ) by displacement of one ethene ligand. UV irradiation of 5 (PR₃ = iPr₂PCH₂CO₂Me) and 11 (R² = (CH₂)₃CO₂Me) leads, after addition of PiPr₃, to the formation of the hydrido(vinyl)iridium(III) complexes 7 and 12 . The reaction of 2 with the ethene derivatives CH₂=CHR (R = CN, OC(O)Me, C(O)Me) affords the compounds [Ir(κ²‐acac)(CH₂=CHR)(PiPr₃)] ( 13 – 15 ), which on photolysis in the presence of PiPr₃ also undergo an intramolecular C–H activation. In contrast, the analogous complexes [Ir(κ²‐acac)(olefin)(PiPr₃)] (olefin = (E)‐C₂H₂(CO₂Me)₂ 16 , (Z)‐C₂H₂(CO₂Me)₂ 17 ) are photochemically inert.     

Synthesis and Structural Studies of New (Triphenylphosphine)(trialkoxysilanethiolato)gold(I) Complexes

Compounds of general formula Au{SSi(OR)₃}(PPh₃), R = Prⁱ ( 1 ), Bu^s ( 2 ) or Bu^t ( 3 ), have been obtained by reaction of AuCl(PPh₃) with triethylammonium salts of respective silanethiols, (RO)₃SiSH. Molecular and crystal structures of 1 , 2 , and 3 have been determined by the single crystal X‐ray structural analysis. Compounds 1 and 2 are the first structurally characterized metal derivatives of hydrolytically unstable trialkoxysilanethiols (PrⁱO)₃SiSH and (Bu^sO)₃SiSH.     

Synthesis,characterization and antimicrobial activities of transition metal complexes of N,N -dialkyl- N′ -(2-chlorobenzoyl)thiourea derivatives

N,N-di-n-propyl-N′-(2-chlorobenzoyl)thiourea (HL¹) (1), N,N-diphenyl-N′-(2-chlorobenzoyl)thiourea (HL²) (2), and their Ni^II, Co^II, Cu^II, Zn^II, Pt^II, Cd^II and Pd^II complexes have been synthesized and characterized. HL¹ and its copper complex were characterized by single-crystal X-ray diffraction methods. The ligands coordinate as bidentates yielding essentially neutral complexes of the type [ML₂]. The complexes were screened for their in vitro antibacterial, antifungal activities and toxicity. All compounds showed antimicrobial activity, but antibacterial efficacy is greater than antifungal activity.