Screening organophosphorus nerve agent degradation products in pesticide mixtures by GC-ICPMS

Gas chromatography inductively coupled plasma mass spectrometry (GC-ICPMS) was utilized for the analysis of four organophosphorus nerve agent degradation products in the presence of mixtures of common organophosphorus pesticides. The first degradation products of sarin (isopropyl methylphosphonic acid, GB acid), cyclosarin (cyclohexyl methylphosphonic acid, GF acid), and soman (pinacolyl methylphosphonic acid) as well as their common final hydrolysis product methyl phosphonic acid were utilized throughout these experiments. Due to the non-volatile nature of these alkyl phosphonic acid degradation products, derivatization was performed to generate the volatile tert-butyl dimethylsilyl species. Degraded organophosphorus pesticide standards were obtained for acephate, chlorpyrifos, dichlorvos, ethion, and parathion ethyl. Mixtures consisting of three pesticides in the presence of a single nerve agent degradation product were prepared. GC-ICPMS allowed for the separation and detection of all four degradation products in the presence of pesticide mixtures in just over 12 minutes. This is the first study analyzing pesticides as interfering species for analysis of nerve agent degradation products by GC-ICPMS.     

Certification of methylmercury in cod fish tissue certified reference material by species-specific isotope dilution mass spectrometric analysis

A new cod fish tissue certified reference material, NMIJ CRM 7402-a, for methylmercury analysis was certified by the National Metrological Institute of Japan in the National Institute of Advanced Industrial Science and Technology (NMIJ/AIST). Cod fish was collected from the sea close to Japan. The cod muscle was powdered by freeze-pulverization and was placed into 600 glass bottles (10 g each), which were sterilized with γ-ray irradiation. The certification was carried out using species-specific isotope dilution gas chromatography inductively coupled plasma mass spectrometry (SSID–GC–ICPMS), where ²⁰²Hg-enriched methylmercury (MeHg) was used as the spike compound. In order to avoid any possible analytical biases caused by nonquantitative extraction, degradation and/or formation of MeHg in sample preparations, two different extraction methods (KOH/methanol and HCl/methanol extractions) were performed, and one of these extraction methods utilized two different derivatization methods (ethylation and phenylation). A double ID method was adopted to minimize the uncertainty arising from the analyses. In order to ensure not only the reliability of the analytical results but also traceability to SI units, the standard solution of MeHg used for the reverse-ID was prepared from high-purity MeHg chloride and was carefully assayed as follows: the total mercury was determined by ID–ICPMS following aqua regia digestion, and the ratio of Hg as MeHg to the total Hg content was estimated by GC–ICPMS. The certified value given for MeHg is 0.58 ± 0.02 mg kg⁻¹ as Hg. Figure NMIJ CRM 7402-a: cod fish tissue for MeHg analysis     

Modified semi-rotating cryogenic modulator for comprehensive two-dimensional gas chromatography

A previously constructed semi-rotating cryogenic modulator was modified for comprehensive two-dimensional gas chromatography (GC×GC). The retention time repeatability was improved by replacing the modulator control program unit with a new system. Peak widths obtained with the modified modulator were comparable with those obtained with the previous modulator and other modulator types. The modulator was easy to construct and it can be installed in any commercial GC system. The constructed GC×GC–FID system and data obtained by gas chromatography–mass spectrometry (GC–MS) were used for identification of unknowns in forest aerosol samples. Figure A semi-rotating cryogenic modulator in which modulation is based on two-step cryogenic trapping with continuously flowing carbon dioxide has been developed for comprehensive two-dimensional gas chromatography     

Combining TXRF,FT-IR and GC–MS information for identification of inorganic and organic components in black pigments of rock art from Alero Hornillos 2 (Jujuy,Argentina)

Archaeological samples are complex in composition since they generally comprise a mixture of materials submitted to deterioration factors largely dependent on the environmental conditions. Therefore, the integration of analytical tools such as TXRF, FT-IR and GC–MS can maximize the amount of information provided by the sample. Recently, two black rock art samples of camelid figures at Alero Hornillos 2, an archaeological site located near the town of Susques (Jujuy Province, Argentina), were investigated. TXRF, selected for inorganic information, showed the presence of manganese and iron among other elements, consistent with an iron and manganese oxide as the black pigment. Aiming at the detection of any residual organic compounds, the samples were extracted with a chloroform–methanol mixture and the extracts were analyzed by FT-IR, showing the presence of bands attributable to lipids. Analysis by GC–MS of the carboxylic acid methyl esters prepared from the sample extracts, indicated that the main organic constituents were saturated (C_16:0 and C_18:0) fatty acids in relative abundance characteristic of degraded animal fat. The presence of minor C_15:0 and C_17:0 fatty acids and branched-chain iso-C_16:0 pointed to a ruminant animal source. Figure Rock art painting at Hornillos 2 Cave, Susques, Argentina     

Further research on the photo-SPME of triclosan

In this study the photoinduced degradation of triclosan has been investigated by photo-solid-phase microextraction (photo-SPME). In photo-SPME, photodegradation is carried out on the SPME fibre containing the target compound. Triclosan was extracted from aqueous solutions by use of polydimethylsiloxane SPME fibres and these were subsequently exposed to UV irradiation (power 8 W, wavelength 254 nm) for different times (from 2 to 60 min). The photodegradation kinetics of triclosan were investigated, the photoproducts generated were tentatively identified, and the photochemical behaviour of these products was studied by use of this on-fibre approach followed by gas chromatographic–mass spectrometric analysis. Eight photoproducts were tentatively identified, including chlorinated phenols, chlorohydroxydiphenyl ethers, 2,8-dichlorodibenzo-p-dioxin, and a possible dichlorodibenzodioxin isomer or dichlorohydroxydibenzofuran. The main photodegradation mechanisms were postulated and photodegradation pathways proposed. The effect of pH on triclosan degradation and on triclosan-to-dioxin conversion was also investigated. Triclosan degradation occurred, and generation of 2,8-dichlorodibenzo-p-dioxin was confirmed, throughout the pH range studied (from 3 to 9).      

Effects of sample pretreatment and storage conditions in the determination of pyrethroids in water samples by solid-phase microextraction and gas chromatography–mass spectrometry

The aqueous instability of pyrethroids and other compounds usually found in commercial pesticide formulations has been demonstrated in this work. Several types of sample treatment have been studied to avoid analyte losses during sample manipulation and storage. Analysis was performed by SPME–GC–MS. Addition of sodium thiosulfate to tap water prevented pyrethroid degradation as a result of oxidation by free chlorine. The amount added was optimized to minimize the effect of the salt on the analytical results. Analysis of samples that had been stored at 4 °C for several days revealed loss of some of the pyrethroids in the first period of storage. The effect of freezing the samples was studied and it was confirmed that samples could be stabilized for at least one week by freezing. Finally, addition of a miscible organic solvent, for example acetone, led to improvement of the analytical precision. The quality of the SPME–GC–MS method was studied. Linearity (R > 0.993), repeatability (RSD < 15%), and sensitivity (detection limits between 0.9 and 35 pg mL⁻¹) were good. When the procedure was applied to real samples including run off and waste water some of the target compounds were identified and quantified.      

Evaluation of solid-phase microextraction conditions for the determination of polycyclic aromatic hydrocarbons in aquatic species using gas chromatography

This paper describes a headspace solid-phase microextraction (HS-SPME) procedure coupled to gas chromatography with mass spectrometric detection (GC–MS) for the determination of eight PAHs in aquatic species. The influence of various parameters on the PAH extraction efficiency was carefully examined. At 75 °C and for an extraction time of 60 min, a polydimethylsiloxane–divinylbenzene (PDMS/DVB) fiber coating was found to be most suitable. Under the optimized conditions, detection limits ranged from 8 to 450 pg g⁻¹, depending on the compound and the sample matrix. The repeatability varied between 7 and 15% (RSD). Accuracy was tested using the NIST SRM 1974b reference material. The method was successfully applied to different samples, and the studied PAHs were detected in several of the samples. Figure Headspace SPME sampling followed by GC–MS facilitates routine monitoring of PAHs in aquatic species     

Monitoring the hydrolysis of toxic organophosphonate nerve agents in aqueous buffer and in bicontinuous microemulsions by use of diisopropyl fluorophosphatase (DFPase) with 1H–31P HSQC NMR spectroscopy

The enzyme diisopropyl fluorophosphatase (DFPase, EC 3.1.8.2) from the squid Loligo vulgaris effectively catalyzes the hydrolysis of diisopropyl fluorophosphate (DFP) and a number of organophosphorus nerve agents, including sarin, soman, cyclosarin, and tabun. Until now, determination of kinetic data has been achieved by use of techniques such as pH-stat titration, ion-selective electrodes, and a recently introduced method based on in situ Fourier-transform infrared (FTIR) spectroscopy. We report the use of 1D ¹H–³¹P HSQC NMR spectroscopy as a new method for real-time quantification of the hydrolysis of toxic organophosphonates by DFPase. The method is demonstrated for the agents sarin (GB), soman (GD), and cyclosarin (GD) but can also be used for V-type nerve agents, for example VX. Besides buffered aqueous solutions the method was used to determine enzymatic activities in a biodiesel-based bicontinuous microemulsion that serves as an example of complex decontamination media, for which other established techniques often fail. The method is non-invasive and requires only limited manual handling of small volumes of liquid (700 μL), which adds to work safety when handling highly toxic organophosphorus compounds. Limits of detection are slightly below 100 μmol L⁻¹ on a 400 MHz spectrometer with 16 FIDs added for a single time frame. The method is not restricted to DFPase but can be used with other phosphotriesterases, for example paraxonase (PON), and even reactive chemicals, for example oximes and other nucleophiles, as long as the reaction components are compatible with the NMR experiment.      

Chemometric tools for identification of volatile aroma-active compounds in oregano

One of the purposes of chemical analysis is to find quick and efficient methods to answer complex analytical questions in the life sciences. New analytical methods, in particular, produce a flood of data which are often very badly arranged. An effective way to overcome this problem is to apply chemometric methods. As part of the following investigations, three brands of oregano were analysed to identify their volatile aroma-active compounds. Two techniques were applied—gas chromatograpy–olfactometry (GC–O) and human sensory evaluation. Aroma-impact compounds could be identified in the main brands of oregano with the aid of chemometric methods (principal-components analysis, hierarchical cluster analysis, linear discriminant analysis, partial least-squares regression). Therefore, it is possible to reduce the analysis of sensory and olfactometry to relevant attributes. This makes classifying new species easier, much faster, and less expensive and is the premise for quick and more economic identification of new potential genotypes for oregano plant breeding. A comprehensive list of oregano key odourants, determined by GC–O and human sensory evaluation using different methods of supervised and unsupervised pattern cognition, has not previously been published.      

Iron fractionation for corrosion products from natural gas pipelines by continuous-flow sequential extraction

The forms and quantities of iron species in corrosion product samples from natural gas pipelines were examined, using a continuous-flow sequential extraction system. Sequential extraction consists of four steps that dissolve water soluble iron (FeSO₄), acid soluble iron (FeCO₃), reducible iron (Fe-(oxyhydr)oxides) and oxidisable iron (FeS₂) fractions, respectively. Selectivity of extracting reagents for particular iron species was evaluated by determination of co-extracted anions, using ion chromatography, and evolved CO₂, using indirect flame atomic absorption spectrometer (FAAS). Iron was found predominantly in the reducible fraction (61–99%), indicating that Fe-(oxyhydr)oxides are the major constituents of the corrosion products.      

A new vapor generation system for mercury species based on the UV irradiation of mercaptoethanol used in the determination of total and methyl mercury in environmental and biological samples by atomic fluorescence spectrometry

A new vapor generation system for mercury (Hg) species based on the irradiation of mercaptoethanol (ME) with UV was developed to provide an effective sample introduction unit for atomic fluorescence spectrometry (AFS). Preliminary investigations of the mechanism of this novel vapor generation system were based on GC–MS and FT–IR studies. Under optimum conditions, the limits of determination for inorganic divalence mercury and methyl mercury were 60 and 50 pg mL⁻¹, respectively. Certified reference materials (BCR 463 tuna fish and BCR 580 estuarine sediment) were used to validate this new method, and the results agreed well with certified values. This new system provides an attractive alternative method of chemical vapor generation (CVG) of mercury species compared to other developed CVG systems (for example, the traditional KBH₄/NaOH–acid system). To our knowledge, this is the first systematic report on UV/ME-based Hg species vapor generation and the determination of total and methyl Hg in environmental and biological samples using UV/ME–AFS. Figure A new vapor generation system for mercury species using mercaptoethanol under UV irradiation was developed as an effective sample introduction unit for atomic fluorescence spectrometry     

Molecularly imprinted sol–gel nanoparticles for mass-sensitive engine oil degradation sensing

Titanate sol–gel layers imprinted with midchain carbonic acids have proven highly useful for detecting engine oil degradation processes owing to selective incorporation of oxidised base oil components. Synthesising the material from TiCl₄ in CCl₄ and precipitating with water leads to imprinted TiO₂ nanoparticles with a diameter of 200–300 nm. Replacing the water by a 1 M ammonium hydroxide solution reduces the average particle size to 50–100 nm with retention of the interaction capabilities. Experiments with the latter solution revealed that the 100-nm particles take up substantially more analyte, indicating a size-dependent phenomenon. As the number of interaction sites within each material is the same, this cannot be a consequence of thermodynamics but must be one of accessibility. The sensor characteristic of water-precipitated particles towards engine oil degradation products shows substantially increased sensitivity and dynamic range compared with the corresponding thin films. Coating quartz crystal microbalances with such nanoparticle materials leads to engine oil degradation sensors owing to incorporation of acidic base oil oxidation products. Interaction studies over a large range of layer thicknesses revealed that both the absolute signal and the steepness of the correlation between the sensor signal and the layer height is 2 times higher for the particles. Figure Generation of molecularly imprinted sol–gel nanoparticles     

Characterization of volatile and semivolatile compounds in waste landfill leachates using stir bar sorptive extraction–GC/MS

Stir bar sorptive extraction in combination with thermal desorption coupled online to capillary gas chromatography–mass spectrometry was applied to investigate volatile and semivolatile fractions in two waste leachate samples: old and fresh ones. The present study helps to improve our knowledge of waste leachate organic composition. The aim is to then make use of this knowledge afterwards in order to generate more reliable and specific treatment processes for waste leachates and thus to respect the environmental statute law regarding their rejection. The volatile and semivolatile compounds appeared to be mainly anthropogenic in origin. Moreover, lactic acid and cyclic octaatomic sulfur could potentially be used as microbiological activity indicators, since they occur during organic matter degradation processes within waste leachates. Figure TDU-CGC-MS analytical equipment     

Analysis of captan, folpet, and captafol in apples by dispersive liquid–liquid microextraction combined with gas chromatography

A novel method was developed for the determination of captan, folpet, and captafol in apples by dispersive liquid–liquid microextraction (DLLME) coupled with gas chromatography–electron capture detection (GC–ECD). Some experimental parameters that influence the extraction efficiency, such as the type and volume of the disperser solvents and extraction solvents, extraction time, and addition of salt, were studied and optimized to obtain the best extraction results. Under the optimum conditions, high enrichment factors for the compounds were achieved ranging from 824 to 912. The recoveries of fungicides in apples at spiking levels of 20.0 μg kg⁻¹ and 70.0 μg kg⁻¹ were 93.0–109.5% and 95.4–107.7%, respectively. The relative standard deviations (RSDs) for the apple samples at 30.0 μg kg⁻¹ of each fungicide were in the range from 3.8 to 4.9%. The limits of detection were between 3.0 and 8.0 μg kg⁻¹. The linearity of the method ranged from 10 to 100 μg kg⁻¹ for the three fungicides, with correlation coefficients (r ²) varying from 0.9982 to 0.9997. The obtained results show that the DLLME combined with GC–ECD can satisfy the requirements for the determination of fungicides in apple samples. Figure Dispersive liquid–liquid microextraction (DLLME) coupled with gas chromatography–electron capture detection (GC–ECD) allows satisfactory determination of fungicides in apple samples     

Elucidation of n-butyl benzyl phthalate biodegradation using high-performance liquid chromatography and gas chromatography–mass spectrometry

n-Butyl benzyl phthalate (BBP) is an endocrine-disrupting chemical. A bacterium species capable of using BBP as the sole source of carbon and energy was isolated from mangrove sediment. Effects of BBP concentration, pH, temperature, and salinity on BBP biodegradation were studied. The optimum pH, temperature, and salinity for the BBP biodegradation were 7.0, 37°C, and 15 g L⁻¹, respectively. BBP was completely degraded within 6 days under optimum conditions, and the biodegradation of BBP could be fitted to a first-order kinetic model. The major metabolites of BBP biodegradation were identified as mono-butyl phthalate, mono-benzyl phthalate, phthalic acid, and benzoic acid by using high-performance liquid chromatography and gas chromatography–mass spectrometry. A preliminary metabolic pathway was proposed for the biodegradation of BBP.      

Analysis of large oxygenated and nitrated polycyclic aromatic hydrocarbons formed under simulated diesel engine exhaust conditions (by compound fingerprints with SPE/LC-API-MS)

The analysis of organic compounds in combustion exhaust particles and the chemical transformation of soot by nitrogen oxides are key aspects of assessment and mitigation of the climate and health effects of aerosol emissions from fossil fuel combustion and biomass burning. In this study we present experimental and analytical techniques for efficient investigation of oxygenated and nitrated derivatives of large polycyclic aromatic hydrocarbons (PAHs), which can be regarded as well-defined soot model substances. For coronene and hexabenzocoronene exposed to nitrogen dioxide under simulated diesel exhaust conditions, several reaction products with high molecular mass could be characterized by liquid chromatography-atmospheric pressure chemical (and photo) ionization-mass spectrometry (LC-APCI-MS and LC-APPI-MS). The main products of coronene contained odd numbers of nitrogen atoms (m/z 282, 256, 338), whereas one of the main products of hexabenzocoronene exhibited an even number of nitrogen atoms (m/z 391). Various reaction products containing carbonyl and nitro groups could be tentatively identified by combining chromatographic and mass spectrometric information, and changes of their relative abundance were observed to depend on the reaction conditions. This analytical strategy should highlight a relatively young technique for the characterization of various soot-contained, semi-volatile, and semi-polar reaction products of large PAHs. Figure LC-APCI-MS analysis of nitrated coronene (and HBC): Total-Ion-Chromatogram (TIC), Extracted Ion Chromatograms (EICs) and corresponding mass spectrum (top).     

Wax components of larval cocoon silk of the hornet Vespa analis Fabricius

Wax, 85% of which consists of orthorhombic crystals, has been found in the cocoon of the hornet Vespa analis Fabricius by means of high-resolution ¹³C solid-state nuclear magnetic resonance (NMR). GC–MS analysis revealed the major components of the wax in the cocoon were linear alkenes and alkanes with a total of 23 or 34 carbon atoms. At 40.7 °C a DSC absorption peak and a ¹³C NMR chemical shift change were observed and interpreted as the result of a crystal transition from the orthorhombic to rotator phase of the wax molecules. At 55.5 °C melting of the wax was observed. The amount of crystalline wax deposition varied with the part of the cocoon—crystalline wax was concentrated in the silk sleeve lining the inner wall of each comb cell but there was very little in the silk cap projecting from the end of each cell. Because the wax components of the larval cocoon were almost identical to those of the larval cuticle, despite a slight difference in the profiles, they might have come from the larval cuticle via direct body contact with the cocoon. Figure Cocoon of the hornet Vespa analis Fabricius     

Multiple endonucleases improve MALDI-MS signature digestion product detection of bacterial transfer RNAs

Individual transfer ribonucleic acids (tRNAs) in a complex mixture can be identified by the matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) detection of their signature digestion products. Signature digestion products are endonuclease digestion products whose mass-to-charge value is unique thus corresponding to only a single tRNA. To improve the effectiveness of this approach, we have expanded the applicable endonucleases and examined the use of multiple endonucleases for tRNA identification. The purine specific endonucleases RNase T1 and RNase TA generate the largest number of predicted signature digestion products. Experimentally, MALDI-MS analysis of endonuclease digests from Escherichia coli and Bacillus subtilis finds that any two endonucleases used in combination increases tRNA identification by about 25% over the number identified with a single endonuclease. Using three endonucleases, RNase T1, RNase A, and RNase TA, further improves the number of tRNAs identified by 10–15% over those found with two endonucleases. Limitations in the MALDI-MS approach for complex mixtures were revealed in this study, suggesting that the direct MALDI-MS analysis of signature digestion products is more effective for organisms having 30 or less unique tRNAs. Figure Signature digestion products for tRNA^Cys     

Towards biosensors based on conducting polymer nanowires

We report the electrochemical deposition of poly(pyrrolepropylic acid) nanowires, their covalent modification with antibodies and their conversion into potential functional sensor devices. The nanowires and the devices were characterised by optical microscopy, fluorescence microscopy, electron microscopy and electrical measurements. Fluorescence images, current–voltage (I–V) profiles and real-time sensing measurements demonstrated a rapid and highly sensitive and selective detection of human serum albumin (HSA), a substance that has been used to diagnose incipient renal disease. The detection is based on the selective binding of HSA onto anti-HSA that is covalently attached to the nanowires. The binding changes the electrical properties of the nanowires thus enabling the real-time detection. Whilst the utility of the research was demonstrated for protein binding/detection, the technology could easily be designed for the detection of other analytes by the modification of polymer nanowires with other analyte-specific molecules/biomolecules. Therefore, the technology has the potential to positively impact broad analytical applications in the biomedical, environmental and other sectors. Figure Real-time dynamic current response on sequential exposure of buffer, bovine serum albumin (BSA) and human serum albumin (HSA) onto anti-HSA modified poly (pyrrolepropylic acid) nanowires. Fluorescence images of poly(pyrrolepropylic acid) nanowire (top right) and polypyrrole nanowire control (bottom right) after sequential treatment with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC), anti HSA and fluorophore-labeled HSA.     

Enantioselective complexation of carbamoylated quinine and quinidine with <Emphasis Type="Italic">N</Emphasis>-blocked amino acids: vibrational and electronic circular dichroism study

Infrared absorption (IR) and vibrational and electronic circular dichroism (VCD and ECD, respectively) spectra of tert-butylcarbamoylquinine (t-BuCQN) and pseudoenantiomeric tert-butylcarbamoylquinidine (t-BuCQD), denoted as selectors (SO), complexed with chiral (S) and (R)-3,5-dinitrobenzoylleucine (DNB-Leu) and achiral 3,5-dinitrobenzoylglycine (DNB-Gly), denoted as selectands (SA), in methanol and acetonitrile, with the spectra of pure SA and SO are reported. H–D exchange of exchangeable hydrogen atoms of SA and SO in deuterated methanol which occurs in IR and VCD experiments is exploited to identify Amide II and Amide III vibrational modes. The formation of preferentially bound complexes composed of sterically compatible combinations of DNB-Leu and SO are manifested by increased intensity of VCD bands assigned to vibrations of amide, carbamate, quinoline, and dissociated carboxylate group and also by increased ECD signals. The VCD technique revealed similarities between the strongly bound diastereomeric complex of chiral DNB-Leu and SO and the complex of achiral DNB-Gly and SO, highlighting the leading role of SO in the formation of SA–SO complex. Figure Vibrational circular dichroism study: Interaction markers typical of the binding between the quinine selector and the derivatized amino acid selectand