Dynamic pulsed-beam shaping using a TAG lens in the near UV

The ability to dynamically shape the spatial intensity profile of an incident laser beam enables new ways to modify and structure surfaces through pulsed laser processing. Here we describe a method to generate doughnut-shaped beams from an input Gaussian source using a tunable acoustic gradient index (TAG) lens. The TAG lens is capable of modulating between focused beams and annular rings of variable size, using sinusoidal driving frequencies. Laser micromachining is accomplished by synchronizing the TAG lens to a 355 nm pulsed nanosecond laser. Results in polyimide demonstrate the ability to generate adjacent surface features with different shapes and sizes.     

双焦透镜对Bessel光束传输的影响

研究非轴对称象散光学元件双焦透镜对无衍射Bemel光束的聚焦特性.基于空间域中的广义惠更斯.菲涅耳衍射理论衍射积分,用4×4阶矩阵来描述非轴对称光学系统,导出Bessel光通过双焦透镜更为普遍和广义的光强分布表达式,并对其光强进行数值模拟.分析双焦透镜在x,y面上的焦距取不同值时对Bessel光的影响.导出的广义光强分布表达式包括了普通透镜、双焦透镜和柱透镜的所有情况.研究发现,当象散越大,图形畸变程度越大,导致得到的光学bottle beam的光束质量下降,bottle壁变形,囚禁微观粒子的能力也随之下降.     

柱透镜聚焦高阶Bessel光束产生焦散光束

研究了高阶Bessel光束经过柱透镜后的光场分布特性.在广义惠更斯-菲涅尔衍射积分理论基础上,推导出高阶Bessel光束透过柱透镜后的衍射光场分布表达式;并利用MATLAB和MATHCAD模拟了不同传播距离处的光强分布.实验上,利用轴棱锥和螺旋相位板产生不同阶数的高阶Bessel光束,并使产生的高阶Bessel光束经过柱透镜,最后用CCD记录下不同距离处的衍射光场.研究结果表明,高阶Bessel光束经过柱透镜形成唇状的焦散光束.     

Quasi Bessel beam by Billet's N-split lens

This study utilizes the focal property of a classical Billet's split lens to create more focal points by splitting the lens. This approach distributes the focal points circularly on the focal plane. This study explores the characteristics of beam propagation and analytically derives the asymptotic characteristics of beam propagation based on the stationary phase approximation and the moment-free Filon-type method. Results show that the unique Billet's N-split lens can generate a quasi Bessel beam if the number of splitting N is large enough, e.g., N ≧ 24. This study also explores the diffraction efficiency of corresponding quasi Bessel beam and the influence of aperture size. The potential advantage of proposed split lens approach is that, unlike the classical means of annular aperture, this simple lens approach allows a much larger throughput in creating the Bessel beam and hence the Bessel beam could have more optical energy.     

The characteristics of laser micro drilling using a Bessel beam

A Bessel beam is suitable for laser micro-fabrication because it possesses both a micron-sized focal spot and a deep focal depth. As the influence of focusing aberrations is much smaller than that of a convex lens, the generation of a Bessel beam using an axicon is very practical. In the case of laser micro drilling of austenitic stainless steel with a Bessel beam, suitable processing conditions were investigated. The threshold fluence to make a through hole increased with an increase in the sample thickness. For samples with the same thickness, the threshold fluence increased with an increase in the crossing angle. A small crossing angle Bessel beam can drill a deep hole with a small threshold fluence. A through hole with a diameter smaller than 10 μm can be made on a stainless steel sheet 20 μm thick by using a Bessel beam with a large crossing angle. The taper of the hole drilled with the Bessel beam is smaller than that with the focused beam from the convex lens. PACS 52.38.Mf; 42.62.Cf; 42.79.Bh     

水下任意刚性散射体对Bessel波的散射特性分析

本文利用Bessel波的谐波展开式, 采用T矩阵方法的推导思路, 建立了水下任意刚性散射体在Bessel波照射下的声散射场计算公式. 以水下刚性椭球体和两端附连半球的刚性圆柱体为例, 计算了在不同波锥角β 下的反向散射形态函数, 同时, 依据镜反射波和绕行波的干涉物理模型, 给出了预报Bessel波照射下的反向散射形态函数峰峰间隔值的计算模型. 仿真结果表明本文提出的Bessel波照射下反向散射形态函数峰峰间隔值预报方法是准确有效的, 同时也说明, 本文建立的基于T矩阵法计算水下任意刚性散射体在Bessel波束下的声散射场方法是有效的, 这拓展了T矩阵法的应用领域.     

High-speed varifocal imaging with a tunable acoustic gradient index of refraction lens

Fluidic lenses allow for varifocal optical elements, but current approaches are limited by the speed at which focal length can be changed. Here we demonstrate the use of a tunable acoustic gradient (TAG) index of refraction lens as a fast varifocal element. The optical power of the TAG lens varies continuously, allowing for rapid selection and modification of the effective focal length at time scales of 1 mus and shorter. The wavefront curvature applied to the incident light is experimentally quantified as a function of time, and single-frame imaging is demonstrated. Results indicate that the TAG lens can successfully be employed to perform high-rate imaging at multiple locations.     

Acoustic radiation force on a sphere in standing and quasi-standing zero-order Bessel beam tweezers

Starting from the exact acoustic scattering from a sphere immersed in an ideal fluid and centered along the propagation axis of a standing or quasi-standing zero-order Bessel beam, explicit partial-wave representations for the radiation force are derived. A standing or a quasi-standing acoustic field is the result of propagating two equal or unequal amplitude zero-order Bessel beams, respectively, along the same axis but in opposite sense. The Bessel beam is characterized by the half-cone angle β of its plane wave components, such that β = 0 represents a plane wave. It is assumed here that the half-cone angle β for each of the counter-propagating acoustic Bessel beams is equal. Fluid, elastic and viscoelastic spheres immersed in water are treated as examples. Results indicate the capability of manipulating spherical targets based on their mechanical and acoustical properties. This condition provides an impetus for further designing acoustic tweezers operating with standing or quasi-standing Bessel acoustic waves. Potential applications include particle manipulation in micro-fluidic lab-on-chips as well as in reduced gravity environments.     

高阶贝塞尔脉冲光束通过色散光阑透镜的传输特性

研究了高阶贝塞尔脉冲光束通过色散光阑透镜的光谱和时间空间特性.结果表明:脉冲光束在几何焦面上会出现光谱开关,透镜色散使产生光谱开关的临界位置向z轴移动;透镜一阶色散使几何焦面上峰值光强减小,并使脉冲波形产生显著时间移动和展宽,而二阶和高阶色散的影响较小.此外,光束阶数n和空间参量α也会影响横向光强分布.     

产生多个高光强梯度局域空心光束的理论与实验

在实验中用贝塞尔光束与球面波叠加得到多个具有高强度梯度的局域空心光束(BB)。用衍射理论分析了贝塞尔光束与球面波叠加的光场,借助软件对两光场相干叠加的光强分布进行了模拟,结果表明在球面波的焦点附近能够形成多个高强度梯度的BB。实验中贝塞尔光束和球面波分别用轴棱锥和透镜对平行光聚焦获得,使两光场在同一传播轴上相干叠加,在球面波焦点附近观察到多个BB。通过对比可知,贝塞尔光束与球面波叠加所得BB比用两束贝塞尔光束干涉产生的BB在暗域处具有更大的光强梯度,更有利于稳定的粒子囚禁。     

球形粒子在Bessel波束照射下的轴向辐射力计算和分析

通过声散射理论,将水中粒子的Bessel波束声散射场的分波序列(PWS)表达公式加以推广,进而推导出声辐射力的表达公式,获得了液体球及弹性球在Bessel波束下声辐射力的变化规律。通过观察不同散射角形态函数,可发现声辐射力的产生与粒子背向散射抑制程度有关。对于液体球粒子,球壳厚度及材料介质对粒子声辐射力有着重要的影响,同时Bessel波束波锥角越大,产生负声辐射力的可能性越大。对于弹性球和弹性单层壳粒子,声辐射力的产生与其本身的共振特征存在很大的关系。同时,通过改变球壳内介质及壳层厚度的方法,可增加产生的负声辐射力的频率范围及幅值强度.     

Acoustic scattering of a high-order Bessel beam by an elastic sphere

The exact analytical solution for the scattering of a generalized (or “hollow”) acoustic Bessel beam in water by an elastic sphere centered on the beam is presented. The far-field acoustic scattering field is expressed as a partial wave series involving the scattering angle relative to the beam axis and the half-conical angle of the wave vector components of the generalized Bessel beam. The sphere is assumed to have isotropic elastic material properties so that the nth partial wave amplitude for plane wave scattering is proportional to a known partial-wave coefficient. The transverse acoustic scattering field is investigated versus the dimensionless parameter ka(k is the wave vector, a radius of the sphere) as well as the polar angle θ for a specific dimensionless frequency and half-cone angle β. For higher-order generalized beams, the acoustic scattering vanishes in the backward (θ = π) and forward (θ = 0) directions along the beam axis. Moreover it is possible to suppress the excitation of certain resonances of an elastic sphere by appropriate selection of the generalized Bessel beam parameters.     

高阶贝塞尔脉冲光束通过色散光阑透镜的传输特性*

研究了高阶贝塞尔脉冲光束通过色散光阑透镜的光谱和时间空间特性.结果表明:脉冲光束在几何焦面上会出现光谱开关,透镜色散使产生光谱开关的临界位置向z轴移动|透镜一阶色散使几何焦面上峰值光强减小,并使脉冲波形产生显著时间移动和展宽,而二阶和高阶色散的影响较小.此外,光束阶数n和空间参量α也会影响横向光强分布.     

Experimental Research on Focusing Property of Radially Polarized Beam Based on Solid Immersion Lens

Realization of a near-field optical virtual probe based on an evanescent Bessel beam is strongly dependent on a radially polarized beam; this makes it essential to study the focusing property of the beam. In this paper, two experimental setups based on a fiber device and a liquid crystal device, respectively, are built to generate a radially polarized beam. This beam and an annular radially polarized beam are focused by means of a high numerical aperture objective and a solid immersion lens (SIL). Near-field distribution of the focus spot, the evanescent Bessel field, is experimentally measured with a scanning near-field optical microscope (SNOM). The full width at half maximum (FWHM) of the central peak of the evanescent Bessel field is about 200 nm in the close vicinity of the bottom surface of SIL. This has potential for use as a near-field optical virtual probe.     

聚焦高阶Bessel-Gauss光束重建的理论和实验研究

提出利用薄透镜元件对聚焦后的高阶Bessel-Gauss光束进行重建. 基于衍射理论, 分析了高阶Bessel-Gauss光束聚焦后的重建行为, 数值模拟高阶Bessel-Gauss光束经薄透镜聚焦再通过另一薄透镜重建的三维光场分布和截面光强分布图. 结果表明, 高阶Bessel-Gauss光束经单个薄透镜后产生中空的局域空心光束, 在焦点位置处为圆环, 尔后迅速发散; 在焦点后合适位置处放入另一薄透镜可矫正焦点后发散的光束, 使得其后光场不变, 仍满足Bessel分布; 实验结果与理论分析相符合. 研究结果对光镊、粒子捕获与操控具有一定的指导意义. 关键词： 衍射理论 传输矩阵 高阶Bessel-Gauss光束 重建     

Sidelobe suppression in light-sheet fluorescence microscopy with Bessel beam plane illumination using subtractive imaging

The fluorescence from the out-of-focus region excited by the sidelobes of a Bessel beam is the major concern for light-sheet fluorescence microscopy(LSFM) with Bessel beam plane illumination. Here, we propose a method of applying the subtractive imaging to overcome the limitation of the conventional LSFM with Bessel beam plane illumination. In the proposed method, the sample is imaged twice by line scanning using the extended solid Bessel beam and the ring-like Bessel beam. By subtracting between the two images with similar out-of-focus blur, the improved image quality with the suppression of the Bessel beam sidelobes and enhanced sectioning ability with improved contrast are demonstrated.     

Generation of Nearly Diffraction-Free Beams Using a New Optical System

A new optical system which can efficiently generate the nearly diffraction-free beams is proposed and its characteristics are investigated by numerical analysis. This optical system consists of a new optical element called a DCC (double-concave-cone) lens and an objective lens with a large numerical aperture, and can generate the Bessel beam and also the Bessel-Gauss beam. The maximum propagation distance of nearly diffraction-free beams generated by the system agrees with its theoretical value for the Bessel beam.     

Application of Bessel beams to 2D microfabrication

Fs laser-based two-photon polymerisation (2PP) has been widely reported as a means of directly writing three-dimensional nanoscale structures. Usually the voxel of a high numerical aperture microscope objective is scanned through the resin to build up the required model. In the case of high aspect ratio two-dimensional structures, such as cell scaffolds, repeated scanning is required to build up the height.The voxel shape can be substantially elongated by the inclusion of an axicon lens in the laser beam line. In this report we describe the use of a Bessel beam produced in the region beyond the focus of an objective lens when the beam has been modified in this way.A Ti:sapphire laser was used to write a range of 2D square cell structures in a Zr-loaded sol-gel system. The process was characterised, in terms of the dimensions of the polymerised Bessel region, for different processing conditions. Examples of the structures are also described.     

衍射理论对局域空心光束及无衍射光束重建的描述

利用衍射理论导出了局域空心光束的传输表达式及光强分布,给出了局域空心光束的精细结构,详细分析了其演变过程。讨论了聚焦透镜的焦距f对径向暗域最大尺寸及轴上暗域长度的影响。结果表明,径向暗域最大尺寸及轴上暗域长度都随着f的增大而增大。通过轴棱锥-透镜系统获得局域空心光束,用体视显微镜和CCD照相机组成的系统拍摄光束强度分布。结果表明应用衍射理论可以较精确地描述局域空心光束的演变过程。找出了其应用中的不利因素,更清晰地展现无衍射光束的重建现象。这种描述方法弥补了几何理论和干涉理论的不足。     

光纤激光器直接输出的高功率贝塞尔超短脉冲

构建了一种能够直接输出高功率贝塞尔超短脉冲的光纤激光放大器. 该方案基于在光纤端面特殊设计和制备的微型负轴锥镜, 针对常规超短脉冲光纤激光放大系统所设计, 不需要引入其他分立整形器件, 避免了目前基于轴锥透镜产生贝塞尔光束的通用方法所带来的额外烦琐准直工作, 极大简化了产生贝塞尔光束的方法. 其中的微型负轴锥镜由聚焦粒子束刻蚀法在一段掺镱大模场光子晶体光纤的端面制备, 它和光纤激光系统中的固有准直透镜构成了集成化的光束整形器件. 基于数值模拟结果成功搭建的系统与理论设计一致, 直接输出了在米量级具有高度准直无衍射特性的啁啾皮秒贝塞尔超短脉冲波包, 平均功率高达10.1 W, 对应脉冲能量178 nJ, 经过光栅对压缩后脉冲宽度可达140 fs. 关键词： 衍射 超短脉冲产生 光纤器件 光纤激光器