A study of oleic acid-based hydrothermal preparation of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles

Nearly monodisperse, well crystalline, superparamagnetic CoFe₂O₄ nanoparticles with diameter of 6 nm were synthesized in oleic acid–water–pentanol system at 180 °C. Hydrothermal procedure, as an efficient and environment friendly alternative to organic decomposition methods, was investigated by variation of reaction conditions, and the particle formation mechanism was finally proposed (i.e., hydrolysis of metal oleates in organic phase, with size of the particles (5–8 nm) controlled by polarity-driven precipitation into water phase). As-prepared particles were hydrophobic due to coating by oleic acid. Further modification with dimercaptosuccinic acid led to water-dispersible particles with hydrodynamic diameter of 20 nm. Prepared particles were investigated by TEM, XRD, ICP-AES, light scattering, SQUID magnetometry, and Mössbauer spectroscopy.     

Infrared spectroscopy of solid mixed ammonia–water and acetylene–water aerosol particles

Mixed water aerosols are important components of planetary and lunar atmospheres. In this work, we use rapid-scan Fourier transform infrared (IR) spectroscopy to study solid ammonia–water and acetylene–water aerosol particles formed in a bath gas cooling cell at 78 K. With this set-up, we record time-dependent extinction spectra of particle ensembles in the mid-IR to monitor changes to the internal structure of the aerosol particles. Both ammonia–water and acetylene–water were found to form molecularly mixed structures. The mixing is observed by monitoring the profile for the ammonia ν₂ band and the acetylene ν₅ band, both of which are sensitive to particle properties. Depending on the injection conditions, the mixed particles form either immediately after sample injection or after a short mixing period of several tens of minutes. We confirm the formation of mixed particles by comparing the experimental spectra with spectra calculated with the vibrational exciton model.     

Removal of chromium(VI) and dye Alizarin Red S (ARS) using polymer-coated iron oxide (Fe3O4) magnetic nanoparticles by co-precipitation method

The present research was conducted with an aim to develop such adsorbent system: polymer-coated magnetic nanoparticles which can remove heavy metal and dye from water of different concentration. Synthesis of magnetic iron oxide nanoparticles for contaminated water purification has been one of the outcomes of application of rapidly growing field of Nanotechnology in Environmental Science. In the present study, the efficiency of magnetic nanoparticles for removal of Cr(VI) and dye (alizarin) from water solutions of known concentrations were evaluated. The nanoparticles were prepared by co-precipitation method and characterized by X-ray photoelectron spectroscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy. Polymer-coated magnetic iron oxide nanoparticles carrying functional groups on their surface were synthesized by different methods for permanent magnet-assisted removal of heavy metal (chromium) and dye (Alizarin Red S) from water. The characterization showed that synthesized nanoparticles were in the size range of 10–50 nm. The adsorption capacities of the Fe₃O₄ using polyMETAC-coated particles for dye (Alizarin Red S) removal were 80–96 % and chromium 62–91 %. The chromium concentration was determined after magnetic separation using atomic absorption spectrophotometer and dye concentration was estimated with UV–visible spectrophotometer. Nanoparticles of polymer coated showed the highest removal capacity from water for metal and dye. The developed adsorbents had higher capacity for removal of heavy metal ions and dye.     

Controlled synthesis of photoluminescent Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> nanoparticles from metal-organic polymeric precursor

Bi₄Ti₃O₁₂ (BIT) nanoparticles with a narrow average particle size distribution in the range of 11–46 nm was synthesized via a metal-organic polymeric precursor process. The crystallite size and lattice parameter of BIT were determined by XRD analysis. At annealing temperatures >550 °C, the orthorhombic BIT compound with lattice parameters a = 5.4489 Å, b = 5.4147 Å, and c = 32.8362 Å was formed while at lower annealing temperatures orthorhombicity was absent. Reaction proceeded via the formation of an intermediate phase at 500 °C with a stoichiometry close to Bi₂Ti₂O₇. The particle size and the agglomerates of the primary particles have been confirmed by FESEM and TEM. The decomposition of the polymeric gel was ascertained in order to evaluate the crystallization process from TG-DSC analysis. Raman spectroscopy was used to investigate the lattice dynamics in BIT nanoparticles. In addition, investigation of the dependence of the visible emission band around the blue–green color emission on annealing temperatures and grain sizes showed that the effect of grain size plays important roles, and that oxygen vacancies may act as the radiative centers responsible for the observed visible emission band.     

Aerosol characterization and lung deposition of synthesized TiO2 nanoparticles for murine inhalation studies

This study presents a novel exposure protocol for synthesized nanoparticles (NPs). NPs were synthesized in gas phase by thermal decomposition of metal alkoxide vapors in a laminar flow reactor. The exposure protocol was used to estimate the deposition fraction of titanium dioxide (TiO₂) NPs to mice lung. The experiments were conducted at aerosol mass concentrations of 0.8, 7.2, 10.0, and 28.5 mg m^?3. The means of aerosol geometric mobility diameter and aerodynamic diameter were 80 and 124 nm, and the geometric standard deviations were 1.8 and 1.7, respectively. The effective density of the particles was approximately from 1.5 to 1.7 g cm^?3. Particle concentration varied from 4 × 10⁵ cm^?3 at mass concentrations of 0.8 mg m^?3 to 12 × 10⁶ cm^?3 at 28.5 mg m^?3. Particle phase structures were 74% of anatase and 26% of brookite with respective crystallite sized of 41 and 6 nm. The brookite crystallites were approximately 100 times the size of the anatase crystallites. The TiO₂ particles were porous and highly agglomerated, with a mean primary particle size of 21 nm. The specific surface area of TiO₂ powder was 61 m² g^?1. We defined mice respiratory minute volume (RMV) value during exposure to TiO₂ aerosol. Both TiO₂ particulate matter and gaseous by-products affected respiratory parameters. The RMV values were used to quantify the deposition fraction of TiO₂ matter by using two different methods. According to individual samples, the deposition fraction was 8% on an average, and when defined from aerosol mass concentration series, it was 7%. These results show that the exposure protocol can be used to study toxicological effects of synthesized NPs.     

The interactive effect of agitation condition and titania particle size in hydrothermal synthesis of titanate nanostructures

The nucleation and growth mechanisms of hydrothermal synthesized nanotitanates are proposed based on the interaction effect between agitation condition and pristine titania particle size. TEM examination and N₂ adsorption measurements revealed distinct morphology and textural properties depending on TiO₂ particle size in constant agitation condition. Regarding to the supersaturation degree, heterogeneous nucleation dominates for nanotubes formation from large particle size of raw material. On the other hand, homogeneous nucleation determines nanospheres formation from small particle size of raw material. The nanotubes have an outer diameter ranging from 8 to 10 nm and inner diameter of 2 to 3 nm. The nanospheres have diameters ranging from 50 to 100 nm.     

Synthesis of core–shell nanoparticles with a Pt nanoparticle core and a silica shell

A method to prepare a core–shell structure consisting of a Pt metal core coated with a silica shell (Pt(in)SiO₂) is described herein. A silica shell was grown on poly(vinylpyrrolidone) (PVP)-stabilized Pt nanoparticles 2–3 nm in size through hydrolysis and condensation reactions of tetraethyl orthosilicate (TEOS) in a water/ethanol mixture with ammonia as a catalyst. This process requires precise control of the reaction conditions to avoid the formation of silica particles containing multiple Pt cores and core-free silica. The length of PVP molecules, water content, concentration of ammonia and Pt nanoparticles in solution were found to significantly influence the core–shell structure. By optimizing these parameters, it was possible to prepare core–shell particles each containing a single Pt nanoparticle with a silica layer coating approximately 10 nm thick.     

Effect of particle size on the photochromic response of PWA/SiO2 nanocomposite

A series of photochromic phosphotungstic acid (PWA)/SiO₂ composites were synthesized using the sol-gel method. Depending on the feeding schedule of PWA during synthesis, the size of the formed PWA/SiO₂ particles varied considerably from as small as 1.2 nm to ca. 10 nm. With decreasing silica particle size, the total contact area/interaction between SiO₂ and PWA increases, as revealed by FT-IR and solid-state ²⁹Si-NMR analyses. Particularly, when the size of PWA/SiO₂ is ~1 nm, crystallization of PWA is inhibited, and PWA presents as amorphous molecular entities distributing uniformly in the SiO₂ host, which is in evidence in the XRD spectroscopy and HR-TEM imaging. In contrast, substantial crystallization of PWA takes place when PWA/SiO₂ particles are as large as 10 nm, in which case less amount of surface free Si-OH is available for PWA to make bonds with. Photochromism occurs activated by ultraviolet light irradiation. The rate of coloration/bleaching is found to depend strongly on the particle size of PWA/SiO₂; specifically, the rate increases twice when the particle size is reduced from 10 nm to 1.2 nm.     

Workplace air measurements and likelihood of exposure to manufactured nano-objects,agglomerates, and aggregates

Workplace exposure to nanoparticles from gas metal arc welding (GMAW) process in an automobile manufacturing factory was investigated using a combination of multiple metrics and a comparison with background particles. The number concentration (NC), lung-deposited surface area concentration (SAC), estimated SAC and mass concentration (MC) of nanoparticles produced from the GMAW process were significantly higher than those of background particles before welding (P < 0.01). A bimodal size distribution by mass for welding particles with two peak values (i.e., 10,000–18,000 and 560–320 nm) and a unimodal size distribution by number with 190.7-nm mode size or 154.9-nm geometric size were observed. Nanoparticles by number comprised 60.7 % of particles, whereas nanoparticles by mass only accounted for 18.2 % of the total particles. The morphology of welding particles was dominated by the formation of chain-like agglomerates of primary particles. The metal composition of these welding particles consisted primarily of Fe, Mn, and Zn. The size distribution, morphology, and elemental compositions of welding particles were significantly different from background particles. Working activities, sampling distances from the source, air velocity, engineering control measures, and background particles in working places had significant influences on concentrations of airborne nanoparticle. In addition, SAC showed a high correlation with NC and a relatively low correlation with MC. These findings indicate that the GMAW process is able to generate significant levels of nanoparticles. It is recommended that a combination of multiple metrics is measured as part of a well-designed sampling strategy for airborne nanoparticles. Key exposure factors, such as particle agglomeration/aggregation, background particles, working activities, temporal and spatial distributions of the particles, air velocity, engineering control measures, should be investigated when measuring workplace exposure to nanoparticles.     

Plasmonics properties of trimetallic Al@Al2O3@Ag@Au and Al@Al2O3@AuAg nanostructures

Bimetallic and trimetallic nanoparticles have attracted significant attention in recent times due to their enhanced electrochemical and catalytic properties compared to monometallic nanoparticles. The numerical calculations using Mie theory has been carried out for three-layered metal nanoshell dielectric–metal–metal (DMM) system consisting of a particle with a dielectric core (Al@Al₂O₃), a middle metal Ag (Au) layer and an outer metal Au (Ag) shell. The results have been interpreted using plasmon hybridization theory. We have also prepared Al@Al₂O₃@Ag@Au and Al@Al₂O₃@AgAu triple-layered core–shell or alloy nanostructure by two-step laser ablation method and compared with calculated results. The synthesis involves temporal separations of Al, Ag, and Au deposition for step-by-step formation of triple-layered core–shell structure. To form Al@Ag nanoparticles, we ablated silver for 40 min in aluminium nanoparticle colloidal solution. As aluminium oxidizes easily in water to form alumina, the resulting structure is core–shell Al@Al₂O₃. The Al@Al₂O₃ particle acts as a seed for the incoming energetic silver particles for multilayered Al@Al₂O₃@Ag nanoparticles is formed. The silver target was then replaced by gold target and ablation was carried out for different ablation time using different laser energy for generation of Al@Al₂O₃@Ag@Au core–shell or Al@Al₂O₃@AgAu alloy. The formation of core–shell and alloy nanostructure was confirmed by UV–visible spectroscopy. The absorption spectra show shift in plasmon resonance peak of silver to gold in the range 400–520 nm with increasing ablation time suggesting formation of Ag–Au alloy in the presence of alumina particles in the solution.     

Controllable synthesis of spherical silicon and its performance as an anode for lithium-ion batteries

Spherical silicon is controllably synthesized by the hydrolysis of tetraethylorthosilicate (TEOS) with the addition of different contents of ammonia to form SiO₂, then reduced by magnesium powder in argon atmosphere at 900 °C for 3 h. The experimental results show that the electrochemical performance of the as-prepared silicon anode is much affected by the morphology of silicon, and the spherical silicon with a particle size of 250–300 nm shows a reversible capacity of 1,345.8 mAh g^?1 with the capacity retention of 83.2 % after 20 cycles. The relationship between the electrochemical performance of the spherical silicon and the diameters of silicon sphere makes it possible to control the performance of the silicon anode by adjusting the hydrolysis conditions of TEOS.     

Synthesis and magnetic characterization of nickel ferrite nanoparticles prepared by co-precipitation route

Magnetic nanoparticles of nickel ferrite (NiFe₂O₄) have been synthesized by co-precipitation route using stable ferric and nickel salts with sodium hydroxide as the precipitating agent and oleic acid as the surfactant. X-ray diffraction (XRD) and transmission electron microscope (TEM) analyses confirmed the formation of single-phase nickel ferrite nanoparticles in the range 8-28 nm depending upon the annealing temperature of the samples during the synthesis. The size of the particles (d) was observed to be increasing linearly with annealing temperature of the sample while the coercivity with particle size goes through a maximum, peaking at ∼11 nm and then decreases for larger particles. Typical blocking effects were observed below ∼225 K for all the prepared samples. The superparamagnetic blocking temperature (T_B) was found to be increasing with increasing particle size that has been attributed to the increased effective anisotropy energy of the nanoparticles. The saturation moment of all the samples was found much below the bulk value of nickel ferrite that has been attributed to the disordered surface spins or dead/inert layer in these nanoparticles.     

Mössbauer and magnetic studies of MFe2O4(M = Co, Ni) nanoparticles

Nanocrystalline MFe₂O₄ (M?=?Co, Ni) particles are synthesized by citrate precursor technique. Mössbauer and magnetic studies are carried out with the CoFe₂O₄ samples having particle sizes of 9, 14 and 30 nm and the NiFe₂O₄ samples having particle sizes of 9, 21 and 30 nm. The intrinsic magnetic parameters are found to vary with the particle size. The magnetic interactions and cation distribution present in these systems influence the room temperature Mössbauer parameters. Ferrimagnetic sextets are observed for all the different particle sizes. The observed reduction of the magnetic hyperfine field values with the decrease in the size of MFe₂O₄ particles are attributed to the intrinsic size effect and the canted spin structure at the surface of the nanoparticles.     

Thermodynamic-Controlled Gas Phase Process for the Synthesis of Nickel Nanoparticles of Adjustable Size and Morphology

Gas phase processes are a successful route for the synthesis of nano materials. Nickel particles are used in applications ranging from catalysis to nano electronics and energy storage. The application field defines the required particle size, morphology, crystallinity and purity. Nickel tetracarbonyl is the most promising precursor for the synthesis of high purity nickel particles. Due to the toxicity of this precursor and to obtain an optimal process control we developed a two-step flow type process. Nickel carbonyl and nickel particles are synthesized in a sequence of reactions. The particles are formed in a hot wall reactor at temperatures below 400°C in different gas compositions. Varying the process conditions enables the adjustment of the particle size in a range from 3 to 140 nm. The controllable crystalline habits are polycrystalline, single crystals or multiple twinned particles (MTP). Spectroscopic investigations show an excellent purity. We report about the process and first investigations of the properties of the synthesized nickel nanomaterial.     

Synthesis and structural,magnetic and electrochemical characterization of PtCo nanoparticles prepared by water-in-oil microemulsion

PtCo nanoparticles with homogeneous size (around 3–4 nm) have been synthesized in a water-in-oil microemulsion of water/polyethylenglycol–dodecylether (BRIJ^®30)/n-heptane. X-ray diffraction study revealed the formation of a cubic phase with a gradual decrease of the cell parameter with increasing cobalt incorporation in the crystalline lattice of platinum. In relation to their magnetic properties, the PtCo nanoparticles present a superparamagnetic behaviour even after annealing, although higher permeability was induced by the thermal treatment. Finally, the electrocatalytic activity of the particles towards oxalic acid oxidation in H₂SO₄ was evaluated. The Pt74Co26 nanoparticles showed the highest reactivity for this reaction.     

Structure and lithium storage performances of nickel hydroxides synthesized with different nickel salts

Nickel hydroxides with hierarchical micro-nano structures are prepared by a facile homogeneous precipitation method with different nickel salts (Ni(NO₃)₂·6H₂O, NiCl₂·6H₂O, and NiSO₄·6H₂O) as raw materials. The effect of nickel sources on the microstructure and lithium storage performance of the nickel hydroxides is studied. It is found that all the three prepared samples are α-nickel hydroxide. The nickel hydroxides synthesized with Ni(NO₃)₂·6H₂ or NiCl₂·6H₂O show a similar particle size of 20–30 μm and are composed of very thin nano-sheets, while the nickel hydroxide synthesized with Ni(SO₄)₂·6H₂O shows a larger particle size (30–50 μm) and consists of very thin nano-walls. When applied as anode materials for lithium-ion batteries (LIBs), the nickel hydroxide synthesized with NiSO₄·6H₂O exhibits the highest discharge capacity, but its cyclic stability is very poor. The nickel hydroxides synthesized with NiCl₂·6H₂O exhibit higher discharge capacity than the nickel hydroxides synthesized with Ni(NO₃)₂·6H₂O, and both of them show much improved cyclic stability and rate capability as compared to the nickel hydroxide synthesized with Ni(SO₄)₂·6H₂O. Moreover, pseudocapacitive behavior makes a great contribution to the electrochemical energy storage of the three samples. The discrepancies of lithium storage performance of the three samples are analyzed by ex-situ XRD, FT-IR, electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) tests.     

Spectroscopy of Nickel-Doped Zinc Sulfide Nanoparticles

ABSTRACT

In the present study, Zn_1?xNi_xS (x = 0.0–0.8 mol%) nanoparticles were prepared through the chemical route and the synthesis involved the mixing and drying of zinc acetate and sodium sulphide in an appropriate ratio with the addition of Ni²⁺ at a proper concentration. The structural and spectroscopic studies are investigated by X-ray diffraction (XRD), absorption spectra, emission and excitation spectra, and Raman spectra. Compared with that of the pristine materials, the absorption band-edge demonstrates an apparently blue shift, which is attributed to the quantum size effect. The average particle size of ZnS nanoparticles is in the range of 2–4 nm deduced from the XRD line broadening. Excited at about 330 nm, a blue emission band at 425 nm can be observed, which corresponds to Ni²⁺ luminescent center; this result is consistent with the postulation that Ni²⁺ replaced the Zn²⁺ ions in the lattice of ZnS nanocrystals. Excitation spectra also confirm the above postulation. The effect of different concentrations of nickel is also studied by Raman spectra.     

Thermoexfoliated graphite as support for production of metal–graphite nanocomposites

The method of chemical deposition of metal salts from water–salt solutions with the subsequent thermal decomposition of salt to metal or metal oxide has been developed for thermoexfoliated graphite (TEG). The type of graphite support and character of metal salt thermal decomposition was shown to influence essentially the dispersity and morphology of metal particles being formed on graphite surface. Preliminary treatment of the initial dispersed graphite by H₂SO₄ leads to the formation of oxygen-containing groups on its surface, which are the exchange centres fixing the metal cations in graphite–metal (or graphite–metal oxide) composites. Thermal exfoliation of graphite, which is accompanied by the refinement of graphite structure, occurs as a result of oxidized graphite heat treatment. High porosity, defectiveness and chemical activity of TEG surface favour the effective impregnation of TEG by aqueous salt solution. Thermal treatment of the salt-impregnated graphite leads to formation of Co particles on graphite surface. These particles are 70–150 nm in size for TEG–Co at a relatively high metal content (up to 30 wt%) and 200 nm in size for oxidized dispersed graphite–Co at Co content ∼10 wt%.     

Synthesis, structural and conductivity characterization of alginic acid–Fe3O4 nanocomposite

Alginic acid–Fe₃O₄ nanocomposite is synthesized by the precipitation of Fe₃O₄ in the presence of alginic acid (AA). Structural, surface, morphological, thermal and electrical transport properties of the nanocomposite were performed by XRD, FT-IR, TEM-SEM, TGA and conductivity measurements respectively. FT-IR analysis revealed that Fe₃O₄ NPs are strongly capped with AA and TGA analysis showed that nanocomposite have 80% of Fe₃O₄ content. TEM analysis of Fe₃O₄ NPs show an average particle size of 9.5 nm, and upon nanocomposite formation with AA these particles are observed to form aggregates of ~150 nm. The frequency-dependency of the AC conductivity show electrode polarization effect. Analysis of electrical modulus and dielectric permittivity functions suggest that ionic and polymer segmental motions are strongly coupled. DC electrical conductivity is strongly temperature dependent, and is classified into three regions over a limited temperature range of up to 100 °C.     

Stability of polyvinyl alcohol-coated biochar nanoparticles in brine

This paper reports on the dispersion stability of 150 nm polyvinyl alcohol coated biochar nanoparticles in brine water. Biochar is a renewable, carbon based material that is of significant interest for enhanced oil recovery operations primarily due to its wide ranging surface properties, low cost of synthesis, and low environmental toxicity. Nanoparticles used as stabilizing agents for foams (and emulsions) or in nanofluids have emerged as potential alternatives to surfactants for subsurface applications due to their improved stability at reservoir conditions. If, however, the particles are not properly designed, they are susceptible to aggregation because of the high salinity brines typical of oil and gas reservoirs. Attachment of polymers to the nanoparticle surface, through covalent bonds, provides steric stabilization, and is a necessary step. Our results show that as the graft density of polyvinyl alcohol increases, so too does the stability of nanoparticles in brine solutions. A maximum of 34 wt% of 50,000 Da polyvinyl alcohol was grafted to the particle surface, and the size of the particles was reduced from ~3500 nm (no coating) to 350 nm in brine. After 24 h, the particles had a size of ~500 nm, and after 48 h completely aggregated. 100,000 Da PVA coated at 24 wt% on the biochar particles were stable in brine for over 1 month with no change in mean particle size of ~330 nm.