Nanostructured Au/Si substrate for organic molecule SERS detection

Nanoparticles of noble metals, such as gold and silver, exhibit unique and tunable optical properties on account of their surface plasmon resonance. In particular, gold nanoparticles on silicon substrates are attractive for future nanoscale sensors and optical devices due to their resistance to oxidation and due to their electrical and optical properties. In this study, we developed a nanostructured gold/macroporous silicon (Au/PS) substrate capped with 11-mercaptoundecanoic acid (11-MUA) with ultra-sensitive detection properties achieved in characterization, an approach based on surface-enhanced Raman scattering (SERS). Surface-enhanced Raman scattering allows us to detect substances at a low concentration level and to observe structural details of a thiol molecule bonded to small film thicknesses. Raman measurements were carried out at 514 nm and 785 nm. In order to emphasize the effect of the Si microstructuration on the efficiency of this new substrate (Au/PS) proposed for SERS experiments, the same molecule (11-MUA) was adsorbed on it as well as on gold/atomically flat silicon (Au/Si) and on commercial Klarite (Mesophotonics) substrates. Systematic studies realized by Raman spectroscopy, electron microscopy, and X-ray spectroscopy show the influence of silicon substrate texturing and metallic deposition conditions, including time and temperature on the optical phenomena.     

Gold nanoparticle-coated silicon cone array for surface-enhanced Raman spectroscopy

ABSTRACT

We demonstrate a silicon cone array substrate coated with gold nanoparticles and which was highly sensitive, homogeneous, and provided a large area for surface-enhanced Raman spectroscopy (SERS). A deep reactive ion-etching process was used to fabricate the high-density silicon cone array, and gold nanoparticles were formed on the silicon cone surface by magnetron sputtering. The substrate was tested with 10^?6 M rhodamine 6 G solution. Enhancement of the substrate was about 60-fold greater than that of flat substrate. Moreover, SERS signals obtained from 24 random areas on the substrate showed good homogeneity with an average standard deviation of 3.9%.     

锂离子电池相关材料的Raman光谱学研究

锂离子电池是目前综合性能最好的可充电池。本文总结我们实验室用Raman光谱学研究锂离子电池相关材料的一些结果 ,包括聚合物电解质的微结构和离子输运机制 ,低温热解碳负极材料的结构表征和锂离子在其中的嵌入 /脱出机理 ,元素替代引起正极材料LiMn2 O4的结构变化以及在充放电过程中电极 /电解质界面形成的钝化层的性质及其对电池性能的影响     

Novel method to determine the actual surface area of a laser-nanotextured sensor

The actual surface area of a gold-coated conductive layer over the laser nano-textured surface of sapphire is determined using an electrochemical cyclic voltammetry. The method is down scaled to measure the sensing surface area of 200 × 200 μm² on a laser-ablated ripple sensor used for surface-enhanced Raman spectroscopy/scattering (SERS). Ripple SERS sensors made on different substrates of high refractive index materials such as GaP, diamond, SiC, and Al₂O₃ make a versatile sensing platform with the detection of analyte (here a thiophenol) down to 10 nM concentrations. Direct measurement of the surface area provides a powerful tool to investigate roughness, porosity, and morphology of coatings used for SERS or other light harvesting surfaces such as solar cells. Novelty of the proposed method is in the use of cathodic peak of surface passivation–activation cycle for calculation of surface charge. The method enables high-accuracy surface area measurements from as small as 0.01 mm² pads up to functional solar cells.     

Characterization of polycyclic aromatic hydrocarbons using Raman and surface‐enhanced Raman spectroscopy

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous atmospheric pollutants and food contaminants, which exhibit potent carcinogenicity, mutagenicity, and teratogenicity. Vibrational spectroscopy techniques, especially Raman spectroscopy and surface‐enhanced Raman spectroscopy (SERS), can be potentially used as an alternative technique to liquid and gas chromatography in PAH analysis. However, there is limited information on the intrinsic Raman and SERS fingerprints of PAHs. In this study, we have acquired the Raman and SERS spectra of seven PAH compounds and compared their experimental spectra with theoretical Raman spectra calculated by density function theory (DFT). The vibrational modes corresponding to the Raman peaks have also been assigned using DFT. Characteristic Raman and SERS peaks have been identified for five PAH compounds, and the limits of detection were estimated. Such information could be useful for developing SERS assays for simple and rapid PAH identification. Copyright © 2014 John Wiley & Sons, Ltd.     

SERS detection of red organic dyes in Ag‐agar gel

Micro‐Raman spectroscopy has been widely employed in the last few years for the study of artworks, allowing for the characterization of a high class of pictorial materials. However, the detection of organic dyes by conventional Raman spectroscopy is quite difficult, due to the high fluorescence provided by these compounds. Recently, remarkable improvements have been achieved by the introduction of the surface enhanced Raman spectroscopy (SERS) technique for the analysis of organic dyes. In the present work, a new method is presented, based on the use of a SERS probe made of agar‐agar coupled with silver nanoparticles, for a non‐destructive and minimally invasive micro‐extraction of dyes from textiles. Ag‐agar gel has been tested first on textile mock‐ups dyed with alizarin, purpurin and carminic acid. SERS measurements have been performed adopting laser light excitations at 514.5 and 785 nm of a micro‐Raman setup. Highly structured SERS band intensities have been obtained. After having verified the safety of the method by colorimetric, X‐ray fluorescence and attenuated total reflectance Fourier transform infrared techniques, a real case, a pre‐Columbian piece of textile, have been investigated by Ag‐agar gel. This cutting‐edge method offers new possibilities for a sensitive and non‐destructive analysis of fluorescent materials. Copyright © 2012 John Wiley & Sons, Ltd.     

Detection of biologically active diterpenoic acids by Raman Spectroscopy

Three poorly detectable, biologically active diterpenoic acids, kaurenoic, abietic, and gibberellic acid, were studied by using different modes of Raman spectroscopy. Because of their structural similarities, in the absence of strongly polarizable groups, conventional Raman spectroscopy is not suitable for their unambiguous identification, especially not in solution. We attempted to increase the sensitivity by applying UV‐resonance Raman spectroscopy and surface‐enhanced Raman spectroscopy (SERS) techniques. The UV‐Raman spectra of the three compounds in ethanol/water 50:50 showed only very few enhanced Raman lines. SERS spectra with 514‐nm excitation with Ag colloids were also relatively weak. The best SERS spectra were obtained with 785‐nm excitation on a novel nanostructured substrate, ‘black silicon’ coated with a 400‐nm gold layer. The spectra showed clear differences, and these ‘fingerprints’ would be suitable for the unambiguous identification of these diterpenoic acids. Copyright © 2009 John Wiley & Sons, Ltd.     

SERS active Ag nanoparticles in mesoporous silicon: detection of organic molecules and peptide–antibody assays

Ag nanoparticles synthesized on porous silicon samples were studied and applied as substrates for surface‐enhanced Raman scattering (SERS). The metallic nanostructures prepared by immersion plating were characterized by UV–Vis reflectance spectroscopy and scanning electron microscopy. SERS activity of the substrates was tested using Cyanine dye 1,3,3,1′,3′,3′‐esamethyl‐5,5′‐dimethoxyindodicarbocyanine iodide (Cy5‐OCH₃) as a probe molecule. The Raman spectra obtained for different excitation wavelengths indicate amplifications ascribed to plasmonic resonances with an enhancement factor up to 10⁷. CGIYRLRS peptides were chemisorbed on the Ag nanoparticles with the plasmonic resonance tuned at the excitation energy. Such oligopeptides were used as baits for a specific polyclonal antibody. The overall Raman enhancement allowed to evidence a good selectivity to the target analyte as required by most of the SERS applications on biological assays. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman spectroscopy of dipyrrins: nonresonant,resonant and surface‐enhanced cross‐sections and enhancement factors

Detailed studies of the mechanism of surface‐enhanced (resonance) Raman spectroscopy (SE(R)RS), and its applications, place a number of demands on the properties of SERS scatterers. With large Raman cross‐sections, versatile synthetic chemistry and complete lack of fluorescence, free dipyrrins meet these demands but the Raman and SE(R)RS spectroscopy of free dipyrrins is largely unknown. The first study of the Raman spectroscopy of free dipyrrins is therefore presented in this work. The nonresonant Raman, resonant Raman and surface‐enhanced Raman spectra of a typical meso aryl‐substituted‐dipyrrin are reported. Absolute differential cross‐sections are obtained for excitation wavelengths in the near infrared and visible region, in solution phase and for dipyrrin adsorbed on the surface of silver nanoparticles. Raman enhancement factors for SERRS and resonance Raman are calculated from the observed differential cross‐sections. The magnitudes of the resonantly enhanced cross‐sections are similar to those recently reported for strong SERS dyes such as Rhodamine 6G and Crystal Violet. Free dipyrrins offer the advantages of existing SERS dyes but without the drawback of strong fluorescence. Free dipyrrins should therefore find applications in all areas of Raman spectroscopy including fundamental studies of the mechanisms of SERS and bioanalytical and environmental applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Application of surface‐enhanced Raman scattering in cell analysis

In surface‐enhanced Raman scattering (SERS), the scattered intensity is drastically increased due to a resonant interaction with surface plasmons of coin metals. SERS is a nondestructive spectroscopic method applied also to biomedical samples. It inherits the advantages of normal Raman spectroscopy and at the same time overcomes the inherent low sensitivity problem. These properties endow SERS with exciting opportunities to be a successful analytical tool for cell analysis. SERS can be used to detect only molecules located on or close to the metallic nanostructures which can support surface plasmon resonances for the enhancement of the Raman signals. Therefore, these metallic nanostructures play a key role in the application of SERS in cell analysis. By incorporating the SERS substrates into the biosamples, molecular structural probing and cellular imaging become possible. In the past decade, analysts worldwide have developed many schemes to study the chemical changes and component distribution in cells by using SERS. In this paper, the application of SERS in cell analysis is reviewed. Copyright © 2011 John Wiley & Sons, Ltd.     

Strategy for improved analysis of peptides by surface‐enhanced Raman spectroscopy (SERS) involving positively charged nanoparticles

A strategy for improved surface‐enhanced Raman spectroscopy (SERS) measurements that extends the variety of analytes accessible to SERS analysis is developed. The strategy involves inducing aggregation by mixing positively charged nanoparticles which form SERS‐active clusters when mixed with negatively charged silver nanoparticles fabricated using the Lee–Meisel process. To make positively charged nanoparticles, silver nanoparticles using the traditional Lee–Meisel process are fabricated and coated with a thin layer of silica and the silica modified with silane chemistry. Analytes with a significant amount of negative charge exhibit strong Raman bands when the strategy using these fabricated, positively charged nanoparticles for inducing cluster formation is used, enabling their detection and analysis. We envision the use of positively charged nanoparticles in cluster formation for expanding the range of analytes that can be detected using SERS and hence the range of applications SERS can play a role in. Copyright © 2008 John Wiley & Sons, Ltd.     

Silver-coated Si nanograss as highly sensitive surface-enhanced Raman spectroscopy substrates

We created novel surface-enhanced Raman spectroscopy (SERS) substrates by metalization (Ag) of Si nanograss prepared by a Bosch process which involves deep reactive ion etching of single crystalline silicon. No template or lithography was needed for making the Si nanograss, thus providing a simple and inexpensive method to achieve highly sensitive large-area SERS substrates. The dependence of the SERS effect on the thickness of the metal deposition and on the surface morphology and topology of the substrate prior to metal deposition was studied in order to optimize the SERS signals. We observed that the Ag-coated Si nanograss can achieve uniform SERS enhancement over large area (∼1 cm ×1 cm) with an average EF (enhancement factor) of 4.2×10⁸ for 4-mercaptophenol probe molecules. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Surface‐enhanced Raman scattering of protoberberine alkaloids

Quaternary protoberberine alkaloids are a class of natural dyes characterized by bright colors ranging from yellow to orange. As they present a strong fluorescence emission, their analysis by Raman spectroscopy is limited to specific techniques such as Fourier transform (FT)‐Raman and spectral shift Raman techniques such as shifted subtracted Raman difference spectroscopy (SSRDS) and shifted excitation Raman difference spectroscopy (SERDS). In a previous article, we successfully used surface‐enhanced Raman scattering (SERS) in the analysis of the alkaloid dye berberine in an ancient textile. The examination of the Raman and SERS spectra of berberine in combination with density functional theory (DFT) calculations indicated a flat adsorption geometry of the molecule on the Ag surface. In this article we extend that work to the study of related protoberberine alkaloids, palmatine, jatrorrhizine, and coptisine. The same adsorption geometry as in berberine was deduced. We found that the four alkaloids, although minimally different in their chemical structures, could be differentiated by the position of marker bands. Those bands are the most enhanced ones in the SERS spectra, which appear in the 700–800 cm⁻¹ region. Copyright © 2008 John Wiley & Sons, Ltd.     

Stamping plasmonic nanoarrays on SERS‐supporting platforms

The dielectric property of a nanoparticle‐supporting film has recently garnered attention in the fabrication of plasmonic surfaces. A few studies have shown that the localized surface plasmon resonance (LSPR), and hence surface‐enhanced Raman scattering (SERS), strongly depends on the substrate refractive index. In order to create higher efficiency SERS‐active surfaces, it is therefore necessary to consider the substrate property along with nanoparticle morphology. However, due to certain limitations of conventional lithography, it is often not feasible to create well‐defined plasmonic nanoarrays on a substrate of interest. Here, an additive nanofabrication technique, i.e., nanotransfer printing (nTP), is implemented to integrate electron beam lithography (EBL) defined high‐aspect‐ratio nanofeatures on a variety of SERS‐supporting surfaces. With the aid of suitable surface chemistries, a wide range of plasmonic particles were successfully integrated on surfaces of three physically and chemically distinct dielectric materials, namely, polydimethyl siloxane (PDMS), SU‐8 photoresist, and glass surfaces, using silicon‐based relief pillars. These nTP‐created metal nanoparticles strongly amplify the Raman signal and complement the selection of suitable substrates for better SERS enhancement. Our experimental observations are also supported by theoretical calculations. The implementation of nTP to stamp out metal nanoparticles on a multitude conventional/unconventional substrates has novel applications in designing in‐built plasmonic microanalytical devices for SERS sensing and other related photonic studies. Copyright © 2011 John Wiley & Sons, Ltd.     

Examining metal nanoparticle surface chemistry using hollow-core, photonic-crystal, fiber-assisted SERS

In this Letter, we demonstrate the efficacy of hollow core photonic crystal fibers (HCPCFs) as a surface-enhanced Raman spectroscopy (SERS) platform for investigating the ligand exchange process on the surface of gold nanoparticles. Raman measurements carried out using this platform show the capability to monitor minute amounts of surface ligands on gold nanoparticles used as an SERS substrate. The SERS signal from an HCPCF exhibits a tenfold enhancement compared to that in a direct sampling scheme using a cuvette. Using exchange of cytotoxic cetyltrimethylammonium bromide with α-methoxy-ω-mercaptopoly(ethylene glycol) on the surface of gold nanorods as an exemplary system, we show the feasibility of using HCPCF SERS to monitor the change in surface chemistry of nanoparticles.     

Single-site surface-enhanced Raman scattering beyond spectroscopy

Recent progress in the observation of surface-enhanced Raman scattering (SERS) is reviewed to examine the possibility of finding a novel route for the effective photoexcitation of materials. The importance of well-controlled SERS experiments on a single molecule at a single site is discussed based on the difference in the information obtained from ensemble SERS measurements using multiple active sites with an uncontrolled number of molecules. A single-molecule SERS observation performed at a mechanically controllable breaking junction with a simultaneous conductivity measurement provides clear evidence of the drastic changes both in the intensity and in the Raman mode selectivity of the electromagnetic field generated by localized surface plasmon resonance. Careful control of the field at a few-nanometer-wide gap of a metal nanodimer results in the modification of the selection rule of electronic excitation of an isolated single-walled carbon nanotube. The examples shown in this review suggest that a single-site SERS observation could be used as a novel tool to find, develop, and implement applications of plasmon-induced photoexcitation of materials.     

Application of monitoring methodology in carbon complex contained solution using surface-enhanced Raman spectroscopy (SERS)

Raman spectroscopy is employed to obtain information that cannot be obtained using other technologies, using inelastic scattering. The development of laser technology enables Raman spectroscopy to overcome its limits and succeed in various fields. For example, compared with other analysis methods that use light, it does not require a sample preparation or long measuring time—thus, it is a great breakthrough for in situ process applications. Also, it is difficult to analyze functional groups that are combined and the influence on the reaction is analyzed during the reaction in chemical solutions. Therefore, Raman spectroscopy provides an analytic method and assists in every step to increase the accuracy of the chemical process. Lately, developed surface-enhanced Raman spectroscopy (SERS) are used in precise analyzing methods. High-resolution SERS needs a specific substrate to satisfy each purpose. Raman spectroscopy is now advanced to be more a powerful analytic tool, combined with surface-enhancing technology, atomic force microscopy (AFM), and other technology.     

Microbiological identification by surface-enhanced Raman spectroscopy

New methods for pathogens identification are of growing interest in clinical and food sectors. The challenge remains to develop rapid methods that are more simple, reliable, and specific. Surface-enhanced Raman spectroscopy (SERS) appears to be a promising tool to compete with current untargeted identification methods. This article presents the intensive research devoted to the use of SERS for bacterial identification, from the first to the very recent published results. Compared to normal Raman spectroscopy, the introduction of nanoparticles for SERS acquisition introduces a new degree of complexity. Bacterial Raman fingerprints, which are already subject to high spectral variability for a given strain, become then very dependent on numerous experimental parameters. To overcome these limitations, several approaches have been proposed to prepare the sample, from the microbiological culture conditions to the analysis of the spectrum including the coupling of nanoparticles on the bacterial membrane. Main strategies proposed over the last 20 years are examined here and discussed in the perspective of a protocol transfer towards industry.     

Sensitive Raman spectroscopy of lipids based on drop deposition using DCDR and SERS

Raman spectroscopy is widely used for study of lipids and membrane models. A severe limitation of this technique lies in the low Raman cross section requiring high sample concentrations. We report sensitive detection of synthetic 1,2‐dimyristoyl‐3‐trimethylammonium‐propane (DMTAP) lipid employing two Raman techniques with improved sensitivity: drop coating deposition Raman (DCDR) and surface‐enhanced Raman scattering (SERS) spectroscopies. DCDR provided well‐reproducible DMTAP spectra without considerable loss of its solution properties if measured from the ‘coffee ring’ pattern of a drop dried on a SpectRIM^TM plate. DMTAP was detected at ~10 μM initial solution concentration, which is about three orders of magnitude lower than that for conventional Raman spectroscopy. Moreover, SERS spectra from dried ring of Ag hydrosol/DMTAP system were obtained down to ~0.3 μM DMTAP concentration, which means that sensitivity of SERS is about five orders of magnitude higher than that of conventional Raman spectroscopy. In contrast to the DCDR technique, good SERS spectra of DMTAP were obtained only from some spots of the ring containing big nanoparticle aggregates, and the structural properties of DMTAP were significantly perturbed by adsorption on the Ag nanoparticles. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface enhanced Raman spectroscopy of aromatic compounds on silver nanoclusters

Surface enhanced Raman spectroscopy (SERS) has been used to characterize multilayers of three different aromatic compounds in the proximity of silver nanoclusters. SERS of mercapto benzoic acid (MBA), which adsorbs onto the silver nanoclusters through the sulfur moiety, exhibits frequency shifts in comparison to the Raman spectrum of crystalline MBA. Conversely, benzoic acid and benzophenone that adsorb through the oxygen species lack these frequency shifts, and show only a typical SERS enhancement. We employed X-ray photoelectron spectroscopy (XPS), to probe the nature of the binding between the silver and the three different aromatic compounds. Thereafter, we assigned the major Raman peaks of all three molecules to specific molecular vibrations. Overall, this enables us to determine the origin of the observed shifts in the SERS spectrum of MBA and similar molecules.