Synthesis and characterization of CdS/PVA nanocomposite films

A series CdS/PVA nanocomposite films with different amount of Cd salt have been prepared by means of the in situ synthesis method via the reaction of Cd²⁺-dispersed poly vinyl-alcohol (PVA) with H₂S. The as-prepared films were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) absorption, photoluminescence (PL) spectra, Fourier transform infrared spectroscope (FTIR) and thermogravimetric analysis (TGA). The XRD results indicated the formation of CdS nanoparticles with hexagonal phase in the PVA matrix. The primary FTIR spectra of CdS/PVA nanocomposite in different processing stages have been discussed. The vibrational absorption peak of CdS bond at 405 cm⁻¹ was observed, which further testified the generation of CdS nanoparticles. The TGA results showed incorporation of CdS nanoparticles significantly altered the thermal properties of PVA matrix. The photoluminescence and UV-vis spectroscopy revealed that the CdS/PVA films showed quantum confinement effect.     

Re-dispersible Li<Superscript>+</Superscript> and Eu<Superscript>3+</Superscript> co-doped CdS nanoparticles: Luminescence studies

Re-dispersible CdS, 5 at.% Eu³⁺-doped CdS, 2 at.% Li⁺ and 5 at.% Eu³⁺ co-doped CdS nanoparticles in organic solvent are prepared by urea hydrolysis in ethylene glycol medium at a low temperature of 170°C. CdS nanoparticles have spherical shape with a diameter of ∼80 nm. The asymmetric ratio (A ₂₁) of the integrated intensities of the electrical dipole transition to the magnetic dipole transition for 5 at.% Eu³⁺-doped CdS is found to be 3.8 and this ratio is significantly decreased for 2 at.% Li⁺ and 5 at.% Eu³⁺ co-doped CdS (A ₂₁ = 2.6). It establishes that the symmetry environment of Eu³⁺ ion is more favored by Li-doping. Extra peak at 550 nm (green emission) could be seen for 2 and 5 at.% Eu³⁺ co-doped CdS. Also, the significant energy transfer from host CdS to Eu³⁺ is found for 5 at.% Eu³⁺-doped CdS compared to that for 2 at.% Li⁺ and 5 at.% Eu³⁺ co-doped CdS.      

Identification of tyrosine in the presence of tryptophan using Cd-enriched colloidal CdS nanoparticles: A fluorescence spectroscopic study

A simpler identification method of tyrosine in the presence of tryptophan using CdS nanoparticles by conventional spectroscopic technique is proposed. Effect of both sulfide-enriched CdS as well as Cd²⁺-enriched CdS on tryptophan is investigated through absorption and emission spectroscopy. Quenching of tryptophan emission obeyed Stern-Volmer relation and was found to be independent of temperature, indicating a possible static quenching. The time-resolved fluorescence decay of tryptophan was minimally affected by sulfide-enriched CdS as well as Cd²⁺-enriched CdS nanoparticles, suggesting quenching to be static. In the presence of Cd²⁺-enriched CdS nanoparticles, the emission of tryptophan in phosphate buffer shows a typical spectral broadening along with a long wavelength increase in fluorescence emission. Additionally, spectra followed a typical isoemissive point at 440 nm when tryptophan alone was there. Similarly, isoemissive point at 340 nm was observed in the case of tyrosine. However, a further red shift of isoemissive point (470 nm) in the mixture of both tyrosine and tryptophan was observed. This observation might make Cd²⁺-enriched CdS nanoparticles useful for using as marker for tyrosine in the presence of tyrptophan.     

Phase transition of CdS in the presence of ethylenediamine and formation of hollow CdS submicron particles with needle-like structure

Solid submicron particles, composed of amorphous, hexagonal and cubic phase CdS, were synthesized in water–ethylenediamine solution by precipitating Cd²⁺ ions with S^2? ions, which were generated from the radiolytic reduction of Na₂S₂O₃. In addition, the effects of the absorbed dose on the crystallization process of CdS were investigated in detail. Moreover, hollow CdS submicron particles with needle-like structure could be obtained from the solid CdS submicron particles probably through a hollowing process based on Ostwald ripening and the phase transition of CdS from amorphous to crystalline. In the above processes, ethylenediamine played an important role.     

Room temperature magnetism of Fe doped CdS nanocrystals

Undoped and Fe doped CdS nanocrystals with Fe content of 2–5 at% of average crystallite size 1.2–2 nm have been obtained using chemical co-precipitation method with 2-mercaptoethonal as capping agent at 80 °C. X-ray diffraction (XRD) results showed that the undoped CdS nanocrystals were in mixed phase of cubic and hexagonal, where as the doped CdS nanocrystals were in hexagonal phase. Room-temperature ferromagnetism has been observed in Fe-doped CdS nanocrystals. Magnetic studies indicated diamagnetism in undoped, ferromagnetism in lightly doped (2 and 3 at%) and paramagnetism in samples of higher Fe content (4 and 5 at%). The substitutional incorporation of Fe³⁺ ion in Cd²⁺ sites was reflected in structural and electron paramagnetic resonance (EPR) measurements. Isolated as well as interacting Fe³⁺ ions are observed in EPR.     

Non-injection and one-pot approach to CdSe: Eu<Superscript>3+</Superscript> hybrid nanocrystals with tunable photoluminescence from green to red

Europium ion-doped CdSe hybrid nanocrystals (CdSe:Eu³⁺ NCs) as a class of new luminescent materials have drawn increasing attention in recent years owing to their remarkable optical properties. In this paper, we report a facile method to prepare CdSe:Eu³⁺ NCs using oleic acid (OA) as the capping agent. With this non-injection and one-pot synthesized approach, the formation and surface passivation of CdSe:Eu³⁺ NCs are performed simultaneously and result in intrinsic luminescence. The as-prepared CdSe:Eu³⁺ NCs are characterized by transmission electron microscopy, X-ray diffraction, and energy-dispersive X-ray spectroscopy (EDX). Their optical properties are also studied by UV–vis and photoluminescence spectra. Moreover, the effects of feed ratios and reaction temperatures on the optical properties are further investigated. The results show that the luminescent spectra of CdSe:Eu³⁺ NCs are tunable from green (490 nm) to red (630 nm) and gradually redshift with the increase of the nanoparticle size from 2.5 to 4.4 nm. Upon decoration with 2-thenoyltrifluoroacetone (TTA), the luminescence of europium ion drastically increases and efficient energy transfer from CdSe host to the europium ion is proposed. In addition, an MTT and apoptosis assay show CdSe:Eu³⁺ NCs have low cellular toxicity and could be used as fluorescence imaging for human epithelial type 2 (Hep-2) cells. These properties make CdSe:Eu³⁺ NCs a potential candidate for biological labeling, immunoassays, and optical sensing.

Open image in new window

Graphical abstract Stable and luminescent CdSe:Eu³⁺ hybrid nanocrystals were synthesized, and the luminescence is tunable from green to red by the variation of reaction temperatures and feed ratios. Moreover, CdSe:Eu³⁺ NCs show low cellular toxicity and could be used as fluorescence probes for Hep-2 cells.

     

A Dual-Target Fluorescent Probe with Response-Time Dependent Selectivity for Cd<Superscript>2+</Superscript> and Cu<Superscript>2+</Superscript>

A novel fluorescent probe (NT) was developed by merging 2-hydrazinylbenzothiazole with 2-hydroxy-1-naphthaldehyde for the detection of Cd²⁺ and Cu²⁺. The probe alone is almost nonfluorescent due to the isomerization of C=N in the excited state. The addition of Cd²⁺ can cause an immediate strong green fluorescence owing to the suppression of C=N isomerization by Cd²⁺-coordination. Furthermore, NT gives a delayed turn-on fluorescence response to Cu²⁺ although it is a vigorous fluorescence quencher, which was thanks to the inhibition of the electron transfer between excited fluorophore and paramagnetic Cu²⁺ by sulfur donor. Based on fluorescence spectra and ESI-MS analysis, the binding modes between NT and Cd²⁺/Cu²⁺ were proposed.     

Luminescent Properties of Hybrid Nanostructures Based on Quantum Dots of CdS,Europium 1,3-Diketonate,and Methylene Blue Molecules

The luminescent properties of hybrid nanostructures constructed from colloidal quantum dots (QDs) of CdS passivated with thioglycolic acid, europium(III) tris(tenoyltrifluoroacetonate), and methylene blue dye molecules are studied. Spectral features typical for the formation of core/shell QDs of the CdS/CdS:Eu³⁺ type are found. It is noted that the adsorption of the europium complex at the QD interfaces and the formation of QDs of the CdS/TGA/Eu³⁺ are probable. Spectral patterns that reveal nonradiative energy transfer from the recombination luminescence centers of CdS QDs to the Eu³⁺ ions in the CdS/CdS:Eu³⁺ and CdS/TGA/Eu³⁺ structures are obtained. This is manifested in quenching the recombination luminescence of QDs and in the ignition of the intracentric luminescence of Eu³⁺, which enhance with an increase in the concentration of the europium complex. When such structures are combined with methylene blue molecules, the half-width of the absorption spectra is found to increase by 10–15% with an unchanged position of the absorption band maximum. With an increase in the concentration of methylene blue molecules, decreases in the intensity of the recombination luminescence band of CdS QDs at a wavelength of 530 nm and in the luminescence intensity of Eu³⁺ ions and simultaneously the rise up of the fluorescence of methylene blue at a wavelength of about 675 nm are observed. At the same time, a decrease in the luminescence lifetime of the bands of QDs and europium ions are observed. It is concluded that the nonradiative excitation energy transfer from both the recombination luminescence centers and Eu³⁺ ions to methylene blue molecules takes place.     

Procedures for Controlling the Size, Structure and Optical Properties of CdS Quantum Dots during Synthesis in Aqueous Solution

We report an easy approach for the synthesis of CdS Quantum Dots (CdS QDs) with high luminescence and temporal stability through the reaction of Cd²⁺ and S^2- in the presence of mercaptoacetic acid (MAA) as a capping reagent in aqueous medium, under normal pressure and room temperature. The influence of several experimental variables, including temperature, pH, the Cd/S ratio and the Cd/MAA ratio, on the optical properties of the QDs obtained was studied systematically. The experimental results indicate that these variables play an important role in determining the size and state of the surface of the nanoparticles, and hence their luminescent properties and temporal stability. The general aspects of nanocrystal nucleation and growth in the synthesis of nanocrystals were studied. The best conditions for the synthesis of nanoparticles of high quality are also reported. The CdS nanocrystals obtained exhibited a narrow PL band, with reproducible room-temperature quantum yields.     

Synthesis and Characterization of CdS Nanoparticles with Strong Electrolyte Behavior

The CdS nanoparticles whose structure is similar to a strong electrolyte were synthesized by the colloidal chemical method. The CdS nanoparticles with Cd²⁺-rich surface are capped by the electrically neutral ligand of 2,2-bipyridine (bpy), and the counterion, BPh₄ ^-, is adsorbed around the particle as balance charge. The donation from 2,2-bipyridine at 2-position to the Cd²⁺-rich surface of the CdS nanoparticles was characterized by X-ray photoelectron spectroscopy (XPS). These CdS nanoparticles can redisperse in pyridine (py) or DMF, and have high stability. The determination of electroconductivity and the electrophoresis deposition in dilute solution containing the CdS nanoparticles further prove the rationality of the above electrolyte structure of the CdS nanoparticles.     

Log-pile photonic crystal of CdS–polymer nanocomposites fabricated by combination of two-photon polymerization and in situ synthesis

A log-pile photonic crystal of CdS nanoparticles–polymer nanocomposites was successfully fabricated by a novel method combining the two-photon polymerization technique and in situ synthesis of CdS nanoparticles in a polymer matrix. The photonic band gap of the three-dimensional (3D) log-pile photonic crystal is confirmed and becomes more effective for CdS nanoparticles–polymer nanocomposites than polymer doped with Cd²⁺ ions, because the nanocomposites possess a higher refractive index than the polymer. The proposed concept in the new fabrication method for a 3D microstructure of polymer nanocomposites should be of critical importance in providing a general methodology for functionalization of materials via functional nanocomposites used in the field of laser microstructure fabrication. PACS 42.70.Qs; 78.66.Sq; 81.40.Tv; 82.35.Np; 82.50.Pt     

Ultrasound-assisted microwave preparation of Ag-doped CdS nanoparticles

Ag-doped CdS nanoparticles were synthesized by an ultrasound-assisted microwave synthesis method. The X-ray diffraction patterns reveal a structural evolution from cubic to hexagonal with increasing molar ratios of Ag⁺/Cd²⁺ from 0% to 5%. It shows that the Ag-doped hexagonal CdS nanoparticles are polycrystal. The X-ray photoelectron spectroscopy of the CdS nanoparticles doping with 5% Ag⁺ shows that the doped Ag in CdS is metallic. Simultaneously, the characteristic Raman peaks of the CdS nanoparticles enhance with increasing Ag⁺ concentrations. The photocatalytic activity of different Ag-doped samples show a reasonable change due to different ratios of Ag which doped into CdS.     

Effect of CdS nanoparticles on fluorescence from Sm doped SiO2 glass

Sm³⁺ doped CdS nanoparticles have been prepared by sol-gel method. The effect of annealing temperatures and doping concentrations of CdS on the photoluminescence spectra of Sm³⁺ were studied. From the measurement of its optical absorption, three phenomenological Judd-Ofelt intensity parameters (Ω₂, Ω₄, and Ω₆) have been computed and used to parameterize the radiative properties. The influences of CdS on Sm³⁺ ions were studied by fluorescence spectroscopy. The fluorescence spectra revealed that the emission intensity of samarium increased considerably in the presence of CdS nanoparticles. The evaluation of radiative properties of Sm³⁺ containing CdS showed that the ⁴G_5/2→⁶H_7/2 transition in silica matrix had the potential to be a laser transition.     

Luminescence of CdS:Ag Quantum Dots in a Polymethacrylate Matrix

Semiconductor quantum dots (QDs) exhibit intense luminescence and reproduce optical characteristics. Doping with metal ions has a positive effect on their properties. Introduction of QDs into polymer matrices leads to the formation of a required morphology of composites. There is a problem in synthesis of optically transparent polymer composites containing QDs of the А²В⁶ group that consists in the extremely low solubility of metal chalcogenides and most of their precursors in monomers. To solve this problem, we used colloidal synthesis. CdS QDs were synthesized by the method of appearing reagents in situ in methylmethacrylate (MMA). Doping with Ag⁺ ions was performed by adding a silver salt into the reaction mixture during the synthesis of CdS QDs. The PMMA/CdS:Ag luminescent polymer glasses were synthesized by radical block polymerization of MMA. The transparency of the composites at wavelengths exceeding 500 nm reaches 92% (5 mm). The luminescence excitation is related to the interband electron transitions in CdS crystals. Luminescence in the range of 500–600 nm is observed due to electron relaxation via a system of levels in the band gap of doped CdS crystals. The positions and intensities of the spectral bands depend on the Ag⁺ concentration, particle size, excitation wavelength, and other factors. The formation of Cd(Ag)S/Ag₂S structures at Ag⁺ concentrations higher than 5.0 × 10^–3 mol/L quenches the luminescence.     

Growth defect W<Superscript>3+</Superscript>-W<Superscript>2+</Superscript> of CdWO<Subscript>4</Subscript> crystals

CdWO₄ crystals grown by the Czochralski method at the low-temperature gradient were investigated with electron spin resonance (ESR) spectroscopy. ESR spectra did not contain the spectra of impurity ions typical for the CdWO₄ structure, i.e., Fe³⁺, Mn²⁺, and Cr³⁺. At the same time, in the studied crystals a complex ESR spectrum having the hyperfine structure due to two nonequivalent tungsten atoms was observed (W¹⁸³;I=1/2; natural abundance, 14.28%). Angular dependence analysis and simulation of ESR spectra have shown that this novel spectrum is described by a spin-Hamiltonian with the following parameters:D=839 G,E=80 G,g _xx=2.01,g _yy=1.97,g _zz=1.987 and electron spinS=7/2. There is one magnetically nonequivalent position of the center in the crystal structure and the direction ofD _zz andg _zz corresponds to the direction of W_n-W_n+2 (or Cd_n-Cd_n+2) in the crystal structure. Because of the fact that it is in principle impossible to achieve the electron stateS=7/2 for the d-shell of one transition metal ion and taking into account the fact that such electron state is realized for two nonequivalent tungsten atoms, we suppose the defect structure to be the chain W²⁺-M⁺-W³⁺. In the structure of this defect the ion M⁺ is diamagnetic, the ions W²⁺ and W³⁺ have electron spinS=2 andS=3/2, respectively. The necessary condition for such defect to exist is to place this chain of ions in cadmium positions for the charge compensation. the reason for such defects to form is supposed to be the incorporation of M⁺ ions into the CdWO₄ lattice. The presence of W²⁺ and W³⁺ in Cd positions in the defect structure provides the charge compensation and the lowering of the lattice stress.     

A New Fluorescent Chemosensor Detecting Co<Superscript>2+</Superscript> and K<Superscript>+</Superscript> in DMF Buffered Solution

A new fluorescent chemosensor 2-(2-thiophene)imidazo [4,5,f]-1,10-phenanthroline (L) was prepared and characterized. By adding univalent or divalent metal ions such as Na⁺, K⁺, Mg²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Zn²⁺, Cd²⁺ and Hg²⁺ ions into the solution of L in DMF under buffered conditions with the working pH ranging from 7.0 to 8.0, we found that L could be used to detect K⁺ ratiometricly and it could also be applied to sense Co²⁺ with the phenomenon of fluorescence quenching of L. While the response behavior of L was not discernibly affected by other examined metal ions.     

Functionalized CdS nanospheres and nanorods

Functionalized nanoparticles are discussed. Surfaces of CdS:Mn/ZnS core/shell nanospheres (Qdots) were converted from hydrophobic to hydrophilic by growth of a SiO₂ shell. The colloidal dispersion was stabilize by adding a surfactant with a negative surface charge, and a cell-penetrating-peptide, TAT, was attached through a primary amine group. The TAT functionalized Qdots were shown to pass the blood-brain-barrier and luminescence in the infused half of the brain.In addition, nanorods of S²⁻ rich CdS were synthesized by reaction of excess S with Cd precursors in the presence of ethylene diamine. The photoluminescence (PL) peak from the S²⁻ rich CdS nanorods was broad with a maximum at ∼710 nm, which was 40 nm longer in wavelength than the PL peak from Cd²⁺ rich CdS (∼670 nm) nanorods. The influence of surface electron or hole trap states on the luminescent pathway of CdS nanorods were used to explain these shifts in wavelength. Nanocrystals of Au with ∼2 nm diameters were grown on S²⁻ rich surfaces of CdS nanorods. Significant quenching of photoluminescence was observed from Au nanocrystals on CdS nanorods due to interfacial charge separation. Charge separation by Au nanocrystals on CdS resulted in enhanced UV photocatalytic degradation of Procion red mix-5B (PRB) dye in aqueous solution.     

In situ synthesis of mesoporous CdS nanoparticles in ternary cubic phase lyotropic liquid crystal

An in situ technique for the synthesis of CdS nanoparticles in a ternary lyotropic cubic phase liquid crystal has been carried out. The extremely viscous cubic phase liquid-crystal system consists of poly(oxyethylene)₁₀ nonyl phenol ether as non-ionic surfactant, octane as oil phase and an aqueous phase containing reactant ions (Cd²⁺ and S^2-). Thioacetamide (TAA) has been utilized as a source for slow release of sulfur in the in situ synthesis of CdS. Rheological results show that CdS nanoparticle growth did not disrupt the structure of the cubic phase liquid-crystal system. This indicates that homogenous synthesis of CdS in the liquid crystal had been achieved. The final products were characterized using X-ray photoelectron spectroscopy, thermal gravimetric analysis, transmission electron microscopy and UV-visible spectroscopy. It was found that the CdS nanoparticles formed have a mesoporous structure with a size dependent on the TAA decomposition aging time. Received: 29 March 2002 / Accepted: 4 September 2002 / Published online: 17 December 2002 RID="*" ID="*"Corresponding author. Fax: +603-8921/3257, E-mail: shahidan@pkrisc.cc.ukm.my     

Spectral red shift in the Ag2+ doped CdS quantum dots

Photoluminescence spectrum of pure and Silver (Ag²⁺) doped cadmium sulfide (CdS) quantum dots with different doping concentrations and pure Cd concentrations were carried out. A systematic red shift in the band gap energy, ranging from 2.48 eV to 2 eV was noticed with the increasing Ag²⁺ concentration, however, no shift in the band gap energy was observed for varying pure Cd concentration. The red shift of the band gap energy was consistent in both photoluminescence and absorption spectra and the observed energy shifts are equal to the fundamental and overtone energies of the longitudinal optical phonon of Cd²⁺S.