Comparison of different types of polypyrimidine/CNTs/Pt hybrids in fuel cell catalysis

In this paper, we mainly studied the preparation of platinum-containing composite materials with carbon nanotubes wrapped by polypyrimidine-conjugated polymers and the performance of the composites. The polymer-based carbon nanotubes/Pt catalysts were prepared successfully and confirmed by infrared spectroscopy, XPS, XRD, and TEM images. The performance of polypyrimidine/multi-walled carbon nanotubes (MWCNTs)/Pt and polypyrimidine/double-walled carbon nanotubes (DWCNTs)/Pt was compared with the polypyrimidine/single-walled carbon nanotubes (SWCNTs)/Pt. The amount of the loaded Pt on the polypyrimidine/MWCNTs and polypyrimidine/DWCNTs was calculated to be 50.5 wt% and 52.7 wt% respectively. The effective specific surface area of the polypyrimidine/MWCNTs/Pt (45.7 m²/g) and polypyrimidine/DWCNTs/Pt (42.47 m²/g) was observed by electrochemical cyclic voltammetry. These studies strongly imply that the MWCNTs were better candidates than DWCNTs and SWCNTs in the application of polypyrimidine/CNT materials as catalyst for fuel cells.     

I–V curves of carbon nanotubes with copper contacts using non-equilibrium Green's function method

Using the non-equilibrium Green's function method together with the density-functional theory, the interfaces of carbon nanotubes (CNTs) with Cu electrodes are modeled and the associated I/V curves are evaluated. It is found that the geometry of the interface and electronic transport characteristics are dependent significantly on the diameter of the CNTs. In comparison with the pristine CNT electrode system, the conductance change for the Cu/CNT/Cu system is more sensitive for large diameter CNTs whether the CNT is metallic or semiconductive. The results indicate that the origin is the Cu contacts, which change the electronic structures and the hybridization type of the CNTs due to the C-2pπ and Cu-4s orbital overlaps.     

Fabrication of a carbon nanotube device using a patterned electrode and a local electric field

Suspensions of carbon nanotubes (CNTs) and organic solvent were dropped onto a substrate which had patterned electrodes while applying a DC voltage between the electrodes. Both multiwall and single-wall (SW) CNTs were purified from the mixture of CNTs and the undesirable particles of carbon when the solvent dichloromethane was used at high temperature. It is found that a SW CNT bridges the gap of the electrodes. This enables us to fabricate CNT devices at a controlled position.     

Electrochemical and impedance spectroscopy studies in H2/O2 and methanol/O2 proton exchange membrane fuel cells

This works report results of the structural and the electrochemical characterization of membrane electrode assemblies (MEA) for proton exchange membrane fuel cells (PEMFC) under various cell conditions using different MEA production processes. Electrochemical impedance spectroscopy (EIS) was applied “on-line” (in situ) as a tool for diagnosis concerning the cell performance. MEA with a 25-cm² surface area were prepared using Pt/C and Pt–Ru/C commercial electrocatalysts from E-TEK and Pt–Ru/C electrocatalysts produced by the alcohol reduction process. The catalytic ink was applied directly onto the carbon cloth or, alternatively, onto the Nafion® membrane. Two carbon cloth thicknesses were tested as diffusion layers in the MEA: 0.346 mm (common) and 0.424 mm (ELAT). An increase of the electrocatalytic activity can be obtained by pH control in the alcohol reduction process, possibly due to the better particle dispersion and the smaller particle sizes observed. In addition, a slower current decay in the ohmic region was observed using the thinner carbon cloth. This can be related to a lower resistance of the gas flow through the cloth to the catalytic active layer. Different types of methanol feed were employed in the experiments: by humidification and by evaporation. The results showed that the choice of suitable methods for catalyst preparation as well as for MEA production enhance PEMFC performance.     

Electronic structure,magnetic properties,and microstructural analysis of thiol-functionalized Au nanoparticles: role of chemical and structural parameters in the ferromagnetic behaviour

The present work describes the field emission characteristics of nanocrystalline metal clusters decorated multi walled carbon nanotubes (MWNT) field emitters fabricated over flexible graphitized carbon cloth. MWNT have been synthesized by catalytic chemical vapour decomposition (CCVD) of acetylene over Rare Earth (RE) based AB₂ (DyNi₂) alloy hydride catalyst. Fine powders of RE based AB₂ alloy hydride catalysts have been prepared by hydrogen decrepitation technique. The as-grown carbon nanotubes (CNTs) are purified by acid and heat treatments and characterized using XRD, SEM and TEM. Purified MWNT have been decorated with nanocrystalline Pd, Pt and Pt–Ru metal clusters using a simple chemical reduction method. The characterization of metal decorated CNTs were done by using XRD, SEM, TEM, HRTEM and EDX. Nanocrystalline Pd, Pt and Pt–Ru metal clusters decorated MWNT field emitters have been fabricated over graphitized carbon fabric using spin coating method. The field emission characteristics have been studied using an indigenously fabricated set up and the results are discussed. The samples show excellent emission properties with a fairly stable emission current over a period of 4 h. As the presence of the graphitic layer provides strong adhesion between the nanotubes and carbon cloth, the use of graphitized carbon cloth as substrate opens new possibilities for CNT field emitters.     

Comparative investigation on decorating carbon nanotubes with different transition metals

The diffusion dynamics and structure evolvement of the transition metal (TM=Ni, Cu, Au, and Pt) atoms decorating carbon nanotubes (CNTs) with differences have been systematically studied by Monte Carlo (MC) simulation. The studies show that TM atoms can be encapsulated inside, aggregated and even wrapped on the surface of the CNT, which depend on the interactions among TM–TM and TM–C during the spontaneous diffusion process. The decorating effect is greatly influenced by the diameters of CNTs, TM atoms tend to be encapsulated inside the tube in the relatively large CNTs, while they are inclined to stack on the surface for the small ones. More interestingly, Au and Pt atoms would wrap around the smaller CNT, whereas Ni and Cu atoms are still clustering outside of the CNTs with the increase of the number of TM atoms. Simulation results indicate that Pt and Au possess a better wetting effect with CNT than Ni and Cu.     

Rapid microwave-assisted synthesis and electrochemical characterization of gold/carbon nanotube composites

Hybrid nanostructures composed of gold nanoparticles (NPs) and carbon nanotubes (CNTs) have been prepared by a microwave-assisted method in the mixed solvents of oleylamine and oleic. The morphology, structure and composition of as-obtained Au/CNT composites are characterized by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD). The composites show characteristic plasmon absorption of Au NPs in the Ultraviolet–visual spectrum. Fourier transform infrared spectrum shows the successful introduction of functional groups on the surface of CNTs, which are crucial factors to assist the nucleation in situ of Au NPs on the surface of CNTs. Electrochemical measurements show the enhancement electrochemical response for the gold electrode modified with Au/CNT composites.     

Preparation of NiO decorated CNT/ZnO core-shell hybrid nanocomposites with the aid of ultrasonication for enhancing the performance of hybrid supercapacitors

Supercapacitor (SC) electrodes fabricated with the combination of carbon nanotubes (CNTs) and metal oxides are showing remarkable advancements in the electrochemical properties. Herein, NiO decorated CNT/ZnO core-shell hybrid nanocomposites (CNT/ZnO/NiO HNCs) are facilely synthesized by a two-step solution-based technique for the utilization in hybrid supercapacitors. Benefitting from the synergistic advantages of three materials, the CNT/ZnO/NiO HNCs based electrode has evinced superior areal capacity of ~67 µAh cm⁻² at a current density of 3 mA cm⁻² with an exceptional cycling stability of 112% even after 3000 cycles of continuous operation. Highly conductive CNTs and electrochemically active ZnO contribute to the performance enhancement. Moreover, the decoration of NiO on the surface of CNT/ZnO core-shell increases the electro active sites and stimulates the faster redox reactions which play a vital role in augmenting the electrochemical properties. Making the use of high areal capacity and ultra-long stability, a hybrid supercapacitor (HSC) was assembled with CNT/ZnO/NiO HNCs coated nickel foam (CNT/ZnO/NiO HNCs/NF) as positive electrode and CNTs coated NF as negative electrode. The fabricated HSC delivered an areal capacitance of 287 mF cm⁻² with high areal energy density (67 µWh cm⁻²) and power density (16.25 mW cm⁻²). The combination of battery type CNT/ZnO/NiO HNCs/NF and EDLC type CNT/NF helped in holding the capacity for a long period of time. Thus, the systematic assembly of CNTs and ZnO along with the NiO decoration enlarges the application window with its high rate electrochemical properties.     

Synchrotron radiation photoelectron spectroscopy study of metal-oxide thin film catalysts: Pt-CeO2 coated CNTs

The interaction of Pt with CeO₂ layers was investigated by using high resolution hard X-ray photoelectron spectroscopy. Pt doped CeO₂ layers were deposited simultaneously by rf-magnetron sputtering on a SiO₂/Si substrate and carbon nanotubes (CNTs) grown on a carbon diffusion layer of a polymer membrane fuel cell. In the case of the CNT support photoelectron spectra showed the formation of ionic platinum rich cerium oxide with Pt^2+,4+ species, and with the Pt²⁺/Pt⁴⁺ ratio strongly dependent on the amount of platinum. Ce reveals 4+/3+ mixed valent character with Ce³⁺ concentration increasing with Pt content. In the case of the SiO₂/Si substrate the film revealed Ce⁴⁺ and Pt⁴⁺ species only.     

The interaction between unique hyperbranched polyaniline and carbon nanotubes,and its influence on the dielectric behavior of hyperbranched polyaniline/carbon nanotube/epoxy resin composites

Novel hybridized multi-walled carbon nanotubes (CNTs), consisting of a unique hyperbranched polyaniline (HSiPA) and CNTs, were prepared. The interaction between HSiPA and CNTs was investigated by many techniques, and results show that there are strong π–π and electrostatic interactions between HSiPA and CNTs, so HSiPA can stack firmly onto the surface of CNTs to form a coating. Based on this, a new kind of ternary composites made up of hybridized CNTs and epoxy (EP) resin was prepared, the influence of the ratio of HSiPA to CNTs on the structure and properties of the HSiPA/CNT/EP composites was intensively studied. The percolation threshold of HSiPA/CNT/EP composites is very low (1.26 wt%); besides, with a suitable ratio of HSiPA to CNTs, the HSiPA/CNT/EP composite has much higher dielectric constant and lower dielectric loss than the CNT/EP composite with the same loading of CNTs. When the ratio of HSiPA to CNTs is 0.5:1, the dielectric constant and loss at 100 Hz of the resultant HSiPA/CNT0.5/EP composite are 711 and 1.53, about 7.1 and 4.3 × 10^?3 times the corresponding value of CNT0.5/EP composite, respectively. In addition, compared with traditional CNT/EP composites, the HSiPA/CNT0.5/EP composites have different equivalent circuit models. These attractive results are attributed to unique structure of hybridized CNTs, and thus leading to greatly different structures between the CNT0.5/EP and HSiPA/CNT0.5/EP composites. This investigation reported herein suggests a new approach to prepare new CNTs and related composites with controllable dielectric properties.     

Controllable synthesis and highly efficient electrocatalytic oxidation performance of SnO2/CNT core-shell structures

In this work, the nanocomposites, carbon nanotubes (CNTs) coated with nanosized uninterrupted SnO₂, were prepared controllably by a facile solvothermal method. The obtained nanocomposites have a thin overlayer which is made of nanoparticles with a diameter of ∼3 nm. The products were characterized by X-ray diffraction and transmission electron microscopy. The obtained SnO₂/CNTs have an excellent electrocatalytic oxidation performance for the X-3B, a kind of dye. The parameters affecting the electrocatalytic activity were investigated in details. The excellent catalytic property of the SnO₂/CNT electrodes can be explained as follows: (1) high specific surface area gives more active sites for X-3B oxidation; (2) the formation of thin, uniform, and uninterrupted coverage of SnO₂ nanoparticles on CNTs raises the potential of oxygen evolution and the current efficiency; and (3) the CNTs increase the conductivity of the electrodes, which results in the increase of the current efficiency.     

High-density attachment of FePt nanoparticles on carbon nanotubes by a facile microwave-assisted polyol method

High-density attachment and one-dimensional (1D) array of FePt nanoparticles (NPs) along carbon nanotubes (CNTs) surface to generate FePt/CNT nanocomposites were successfully obtained via a facile CNT-mediated microwave polyol method. The as-prepared 1D FePt/CNTs is about 10–20 nm in diameter and up to μm scale in length. By adjusting the solvents, the ratio of Fe/Pt and the attached density of FePt NPs on the surface of CNTs could be well controlled. The structures, composition, and magnetic properties of the FePt/CNTs were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and magnetic measurements. The possible growth mechanism has also been proposed.     

Effect of metal elements in catalytic growth of carbon nanotubes

Using first-principles calculations, we model the chemical vapor deposition (CVD) growth of carbon nanotubes (CNT) on nanoparticles of late-transition (Ni, Pd, Pt) and coinage (Cu, Ag, Au) metals. The process is analyzed in terms of the binding of mono- and diatomic carbon species, their diffusion pathways, and the stability of the growing CNT. We find that the diffusion pathways can be controlled by the choice of the catalyst and the carbon precursor. Binding of the CNT through armchair edges is more favorable than through zigzag ones, but the relative stability varies significantly among the metals. Coinage metals, in particular Cu, are found to favor CVD growth of CNTs at low temperatures and with narrow chirality distributions.     

Improved emission uniformity and stability of printed carbon nanotubes in electrolyte

In this paper, we studied the effect of NaCl electrolyte as a surface treatment on improving the uniformity and stability of field emission of screen-printed carbon nanotubes (CNTs). A short period of the electrolyte treatment of CNT films remarkably increase emission uniformity and stability. Furthermore, the field emission characteristics of screen-printed carbon nanotubes (CNTs) such as low turn-on field, high emission current density and strong adhesion of the CNT film on the substrate were also reinforced after post-treated. SEM, TEM and Raman spectrum study revealed that uniformity and stability of field emission is enhanced by two factors. Firstly, the electrolyte treatment appeared to render the CNT surfaces more actively by exposing more CNTs form the CNT paste, which dominates initial uniformity and stability of field emission. Secondly, the number of opened CNTs and defects CNTs of CNT film were increased by electrical current energy.     

Ultrasonic-assisted synthesis of Pd–Pt/carbon nanotubes nanocomposites for enhanced electro-oxidation of ethanol and methanol in alkaline medium

Herein, a facile ultrasonic-assisted strategy was proposed to fabricate the Pd–Pt alloy/multi-walled carbon nanotubes (Pd–Pt/CNTs) nanocomposites. A good number of Pd–Pt alloy nanoparticles with an average of 3.4 ± 0.5 nm were supported on sidewalls of CNTs with uniform distribution. The composition of the Pd–Pt/CNTs nanocomposites could also be easily controlled, which provided a possible approach for the preparation of other architectures with anticipated properties. The Pd–Pt/CNTs nanocomposites were extensively studied by electron microscopy, induced coupled plasma atomic emission spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, and applied for the ethanol and methanol electro-oxidation reaction in alkaline medium. The electrochemical results indicated that the nanocomposites had better electrocatalytic activities and stabilities, showing promising applications for fuel cells.     

Pyridine-thermal synthesis and high catalytic activity of CeO2/CuO/CNT nanocomposites

Carbon nanotubes (CNTs) were controllably coated with the uninterrupted CuO and CeO₂ composite nanoparticles by a facile pyridine-thermal method and the high catalytic performance for CO oxidation was also found. The obtained nanocomposites were characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction as well as X-ray photoelectron spectroscopy. It is found that the CuO/CeO₂ composite nanoparticles are distributed uniformly on the surface of CNTs and the shell of CeO₂/CuO/CNT nanocomposites is made of nanoparticles with a diameter of 30-60 nm. The possible formation mechanism is suggest as follows: the surface of CNTs is modified by the pyridine due to the π-π conjugate role so that the alkaline of pyridine attached on the CNT surface is more enhanced as compared to the one in the bulk solvent, and thus, these pyridines accept the proton from the water molecular preferentially, which result in the formation of the OH⁻ ions around the surface of CNTs. Subsequently, the metal ions such as Ce³⁺ and Cu²⁺ in situ react with the OH⁻ ions and the resultant nanoparticles deposit on the surface of CNTs, and finally the CeO₂/CuO/CNT nanocomposites are obtained. The T₅₀ depicting the catalytic activity for CO oxidation over CeO₂/CuO/CNT nanocomposites can reach ∼113 °C, which is much lower than that of CeO₂/CNT or CuO/CNT nanocomposites or CNTs.     

Systematic investigation on the properties of carbon nanotube electrodes with different chemical treatments

The functionalization of carbon nanotubes (CNTs) was carried out by using different chemical treatment methods. These functionalized CNTs were characterized by TEM image and FT-IR spectra. The CNT electrodes are measured by thermal resistivity and cyclic voltammetry experiments. The results showed that two important factors controlled the electrochemical properties of the CNT film electrode: one is the active functional group; another is activation energy of the CNT film. From our experiments, we have found the electrode of 10 min nitric acid treated CNTs have the optimal peaks in relation to carboxylic acids, the highest redox peak currents, the biggest value of k⁰ and well-defined quasi-reversible voltammograms for redox of iron couples, in which the two factors best match.     

High‐Performance UV Protective Waterborne Polymer Coatings Based on Hybrid Graphene/Carbon Nanotube Radicals Scavenging Filler

Ultraviolet (UV) degradation is one of the most important challenges of waterborne coatings in exterior applications. One of the ways to address this issue is addition of radical scavenging species within the polymer matrix. Herein, hybrids of graphene (G) and multiwall carbon nanotubes (CNTs) in different ratios are used as radical scavenging species. Evaluated by electron paramagnetic resonance spectroscopy, it is found that the hybrid made of G/CNTs in ratio of 10:1 efficiently captures and quenches the free radicals. The waterborne polymer composites containing 1 wt% of hybrid G/CNT are synthesized by in situ miniemulsion free radical polymerization using a water soluble initiator. However, due to excellent efficiency to capture free radicals, the polymerization performed using water soluble initiators in the presence of 10:1 G/CNT filler is hindered. This is resolved by physical separation of the free radicals and the scavenging materials within different phases by use of oil soluble initiator. The resulting polymer composites, beside having excellent mechanical resistance, present exceptional stability under accelerated aging conditions during 400 h, suppressing almost completely the UV photodegradation. This is attributed to the efficient radical scavenging of the G/CNTs hybrid filler distributed within polymer matrix, resulting in high‐performance UV protective waterborne composite coatings.     

Synthesis of multi-walled carbon nanotubes for NH3 gas detection

It has been recently demonstrated that carbon nanotubes (CNTs) represent a new type of chemical sensor capable of detecting a small concentration of molecules such as CO, NO₂, NH₃.In this work, CNTs were synthesized by chemical vapor deposition (CVD) on the SiO₂/Si substrate by decomposition of acetylene (C₂H₂) on sputtered Ni catalyst nanoparticles. Their structural properties are studied by atomic force microscopy, high-resolution scanning electron microscopy (HRSEM) and Raman spectroscopy. The CNTs grown at 700 °C exhibit a low dispersion in size, are about 1 μm long and their average diameter varies in the range 25–60 nm as a function of the deposition time. We have shown that their diameter can be reduced either by annealing in oxygen environment or by growing at lower temperature (less than 600 °C).We developed a test device with interdigital Pt electrodes on an Al₂O₃ substrate in order to evaluate the CNTs-based gas sensor capabilities. We performed room temperature current–voltage measurements for various gas concentrations. The CNT films are found to exhibit a fast response and a high sensitivity to NH₃ gas.     

STM/STS investigation of carbon nanotubes deposited on Bi2Te3 surface

This paper reports our scanning tunneling microscopy and spectroscopy (STM/STS) study of double-walled and multi-walled carbon nanotubes (CNTs) of different diameter deposited on Bi₂Te₃ (narrow gap semiconductor). The approximate diameter of the studied double-walled and multi-walled CNTs was 2 nm and 8 nm, respectively. Crystalline Bi2Te3 was used as a substrate to enhance the contrast between the CNTs and the substrate in the STS measurements performed to examine peculiarities of CNT morphology, such as junctions, ends or structural defects, in terms of their electronic structure.