Impedance spectroscopy of vanadium modified BaBi<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript> ceramics

In recent years a wide range of Aurivillius layered materials have been introduced. These novel materials are produced in many various forms such as fibers, thin films as well as bulk by using a number of processing routes. As advanced materials they are they have many interesting properties which include a number of useful electrical properties related to separated grain and grain boundary conductivity, impedance, activation energies, etc. In this paper these properties are described and discussed in detail. The electrical properties of the vanadium doped BaBi₂Nb₂O₉ ceramic was measured over a wide range of temperatures by impedance spectroscopy (IS). The separated grain activation energy, calculated from Arrhenius characteristics at temperatures between room temperature and 600 °C, was 1 eV for 0 at.% of vanadium dopant and 1.2 eV for 10 at.%, whereas the activation energies in the grain boundary region were 0.97 and 1.15 eV, respectively. The obtained results suggest the significant role of vanadium dopant, causing ordering the crystalline structure.     

Conductivity and spectroscopic studies of Li<Subscript>2</Subscript>O-V<Subscript>2</Subscript>O<Subscript>5</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

Lithium vanadium-borate glasses with the composition of 0.3Li₂O–(0.7-x)B₂O₃–xV₂O₅ (x?=?0.3, 0.325, 0.35, 0.375, 0.4, 0.425, 0.45, and 0.475) were prepared by melt-quenching method. According to differential scanning calorimetry data, vanadium oxide acts as both glass former and glass modifier, since the thermal stability of glasses decreases with an increase in V₂O₅ concentration. Fourier transform infrared spectroscopy data show that the vibrations of [VO₄] structural units occur at V₂O₅ concentration of 45 mol%. It is established that the concentration of V⁴⁺ ions increases exponentially with the growth of vanadium oxide concentration. Direct and alternative current measurements are carried out to estimate the contribution both electronic and ionic conductivities to the value of total conductivity. It is shown that the electronic conductivity is predominant in the total one. The glass having the composition of 0.3Li₂O-0.275B₂O₃-0.475V₂O₅ shows the highest electrical conductivity that has the value of 7.4?×?10^?5 S cm^?1 at room temperature.     

Disintegration of a coarse-grained vanadium monoxide VO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> powder

A coarse-grained powder of nonstoichiometric cubic vanadium monoxide VO _y is disintegrated in a Retch PM 200 planetary ball mill. Milling of the coarse-grained vanadium monoxide powder VO _y at a rate of rotation of 500 rpm for 2 h significantly broadens diffraction lines, and the crystal structure of vanadium monoxide VO_1.00 after milling remains the same. High-resolution scanning electron microscopy and X-ray diffraction studies of the microstructure of vanadium monoxide demonstrate that high-energy milling can produce vanadium monoxide powders with an average crystallite size of 23 ± 10 nm. The vanadium monoxide produced by milling has a crystallite size that is half the crystallite size in the titanium monoxide produced by severe plastic deformation.     

Improved electrochemical performance of Li<Subscript>1.2</Subscript>Ni<Subscript>0.2</Subscript>Mn<Subscript>0.6</Subscript>O<Subscript>2</Subscript> cathode material with fast ionic conductor Li<Subscript>3</Subscript>VO<Subscript>4</Subscript> coating

Layered lithium-enriched nickel manganese oxides Li_1.2Ni_0.2Mn_0.6O₂ have been synthesized and coated by fast ionic conductor Li₃VO₄ with varying amounts (1, 3, and 5 wt%) in this paper. The effect of Li₃VO₄ on the physical and electrochemical properties of Li_1.2Ni_0.2Mn_0.6O₂ has been discussed through the characterizations of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), discharge, cyclic performance, rate capability, and electrochemical impedance spectroscopy (EIS). The discharge capacity and coulomb efficiency of Li_1.2Ni_0.2Mn_0.6O₂ in the first cycle have been improved after Li₃VO₄ coating. And, the 3 wt% Li₃VO₄-coated Li_1.2Ni_0.2Mn_0.6O₂ shows the best discharge capacity (246.8 mAh g^?1), capacity retention (97.3 % for 50 cycles), and rate capability (90.4 mAh g^?1 at 10 C). Electrochemical impedance spectroscopy (EIS) results show that the R _ct of Li_1.2Ni_0.2Mn_0.6O₂ electrode decreases after Li₃VO₄ coating, which is due to high lithium ion diffusion coefficient of Li₃VO₄, is responsible for superior rate capability.     

Hierarchical Mn<Subscript>1.5</Subscript>Co<Subscript>1.5</Subscript>O<Subscript>4</Subscript> microspheres constructed from one-dimensional nanorods as high-performance anode material for lithium-ion battery

Mn_1.5Co_1.5O₄ hierarchical microspheres have been successfully synthesized via a solvothermal method and an annealing procedure. Mn_1.5Co_1.5O₄ exhibits advanced cycling performance, and it retains a reversible capacity of 633 mA h g^?1 at a current density of 400 mA g^?1 with a coulombic efficiency of 99.0% after 220 cycles. Its remarkable performance is attributed to the hierarchical structure assembled with nanorods, which increases the contact area between each nanorod and electrolyte. More significantly, the open space between neighboring nanorods and the pores on the surface of nanorods can improve Li⁺ ion diffusion rate. Furthermore, the nanorods have rapid one-dimensional Li⁺ diffusion channels, which not only possess a large specific surface area for high activity but accommodate the volume change during lithiation–delithiation processes. Therefore, Mn_1.5Co_1.5O₄ hierarchical microspheres can act as a promising alternative anode material for lithium-ion battery.     

Laser-pulse-induced Bragg diffraction spectrum rearrangement in opal-VO<Subscript>2</Subscript> composites

The Bragg diffraction spectrum of a synthetic opal with pores filled by the vanadium dioxide semiconductor (VO₂) was found to be strongly affected by 0.1-µs-long YAG:Nd laser first-harmonic pulses (1.06 µm). This effect is associated with a structural phase transition in the opal-VO₂ composite, which is accompanied by a strong change in the VO₂ permittivity.     

Concentration phase transition near the stoichiometric composition of vanadium monoxide VO<Subscript>1.00</Subscript>

The concentration dependences of the magnetic susceptibility and lattice parameter of cubic vanadium monoxide have been measured in the composition range from VO_0.81 to VO_1.07. Near the stoichiometric composition VO_1.00, the concentration dependences exhibit a stepwise increase in the specific magnetic susceptibility (by approximately 0.7 × 10^?6 cm³/g) and lattice constant (by about 0.002 nm). These effects can be related to the concentration phase transition, which occurs in vanadium monoxide with a change from a substoichiometric composition to superstoichiometric. At such a transition, along with a decrease in the concentration of oxygen vacancies, tetrahedrally coordinated vanadium interstitials are formed, as a result of which the B1 structure changes to a more complex cubic phase structure with the same space group Fm-3m.     

Ordered monoclinic vanadium suboxide V<Subscript>14</Subscript>O<Subscript>6</Subscript>

The monoclinic (space group C2/m) superstructure of the suboxide V₁₄O₆, which is formed as a result of the atomic and vacancy ordering of the tetragonal solid solution of oxygen in vanadium, is investigated using X-ray diffraction and symmetry analysis. The monoclinic suboxide V₁₄O₆ is observed in the vanadium oxide samples VO_0.57, VO_0.81, and VO_0.86 synthesized at 1770 K and the samples VO _y (0.87 ≤ y ≤ 0.98) additionally annealed at 1470 K after the synthesis. It is established that the channel of the disorder-order phase transition associated with the formation of the monoclinic suboxide V₁₄O₆ includes six superstructure vectors belonging to three non-Lifshitz stars of one type {k ₁}. The distribution function of the oxygen atoms in the monoclinic superstructure of the suboxide V₁₄O₆ is calculated. It is demonstrated that the displacements of vanadium atoms distort the body-centered tetragonal metal sublattice, thus preparing the formation of the facecentered cubic sublattice and the transition from the suboxide V₁₄O₆ to the cubic vanadium monoxide with the B1 structure.     

V<Subscript>2</Subscript>O<Subscript>5</Subscript>-SiO<Subscript>2</Subscript> hybrid as anode material for aqueous rechargeable lithium batteries

V₂O₅-SiO₂ hybrid material was fabricated by heat-treating a mixture of H₂SiO₃ and V₂O₅. SEM, TEM, XRD, and N₂ isotherm analyses were performed to characterize the morphology and structure details of the as-prepared V₂O₅-SiO₂. The possibility of using the as-prepared V₂O₅-SiO₂ as anode material for aqueous lithium-ion batteries was investigated. Potentiostatic and galvanostatic results indicated that the intercalation/de-intercalation of Li⁺ in this material in aqueous electrolyte was quasi-reversible. It was also found that a discharge capacity of up to 199.1 mAh g^?1 was obtained at a current density of 50 mA g^?1 in aqueous solution of 1 M Li₂SO₄, a value which is much higher than the available reported capacities of vanadium (+5) oxides in aqueous electrolytes.     

Temperature dependent surface and spectral modifications of nano V<Subscript>2</Subscript>O<Subscript>5</Subscript> films

Nanocrystalline V₂O₅ films have been deposited on glass substrates at 300°C substrate temperature using thermal evaporation technique and were subjected to thermal annealing at different temperatures 350, 400, and 550°C. X-ray diffraction (XRD) spectra exhibit sharper and broader characteristic peaks respectively indicating the rearrangement of nanocrystallite phases with annealing temperatures. Other phases of vanadium oxides started emerging with the rise in annealing temperature and the sample converted completely to VO₂ (B) phase at 550°C annealing. FESEM images showed an increase in crystallite size with 350 and 400°C annealing temperatures followed by a decrease in crystallite size for the sample annealed at 550°C. Transmission spectra showed an initial redshift of the fundamental band edge with 350 and 400°C while a blue shift for the sample annealed at 550°C, which was in agreement with XRD and SEM results. The films exhibited smart window properties as well as nanorod growth at specific annealing temperatures. Apart from showing the PL and defect related peaks, PL studies also supported the observations made in the transmission spectra.     

Hydrothermal synthesis and electrochemical characterization of VO2 (B) with controlled crystal structures

Three different VO₂ (B) nanostructures, including urchin-like VO₂ (B), VO₂ (B) honeycombs and VO₂ (B) nanorods have been successfully fabricated through hydrothermal process by adjusting the concentrations of the oxalic acid. The microstructure and morphology of the VO₂ nanostructures were evaluated by using X-ray diffraction and scanning and transmission electron microscopies. Electrochemical properties measurements of urchin-like VO₂ (B) and VO₂ (B) honeycombs showed excellent cycling performance, especially the urchin-like VO₂ (B) exhibited higher discharge capacity and better capacity retention.     

Study of the electrochemical performance of VO2+/VO2 + redox couple in sulfamic acid for vanadium redox flow battery

The present work was performed in order to evaluate sulfamic acid as the supporting electrolyte for VO²⁺/VO₂ ⁺ redox couple in vanadium redox flow battery. The oxidation process of VO²⁺ has similar electrochemical kinetics compared with the reduction process of VO₂ ⁺. The exchange current density and standard rate constant of VO²⁺/VO₂ ⁺ redox reaction on a graphite electrode in sulfamic acid are determined as 7.6?×?10^?4 A cm^?2 and 7.9?×?10^?5 cm s^?1, respectively. The energy efficiency of the cell employing sulfamic acid as supporting electrolyte in the positive side can reach 75.87 %, which is adequate for redox flow battery applied in energy storage. The addition of NH₄ ⁺ to the positive electrolyte can enhance the electrochemical performance of the cell, with larger discharge capacity and energy efficiency. The preliminary exploration shows that the vanadium sulfamate electrolyte is promising for vanadium redox flow battery and is worthy of further study.     

Enhanced electrochemical performance of lithium ion battery cathode Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C

Li-ion battery cathode material lithium-vanadium-phosphate Li₃V₂(PO₄)₃ was synthesized by a carbon-thermal reduction method, using stearic acid, LiH₂PO₄, and V₂O₅ as raw materials. And stearic acid acted as reductant, carbon source, and surface active agent. The effect of its content on the crystal structure and electrochemical performance of Li₃V₂(PO₄)₃/C were characterized by XRD and electrochemical performance testing, respectively. The results showed that the content of carbon source has no significant effect on the crystal structure of lithium vanadium phosphate. Lihtium vanadium phosphate obtained with 12.3% stearic acid demonstrated the best electrochemical properties with a typical discharge capacity of 119.4 mAh/g at 0.1 C and capacity retention behavior of 98.5% after 50 cycles. And it has high reversible discharge capacity of 83 mAh/g at 5 C with the voltage window of 3 to 4.3 V.     

Elevated electrochemical property of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> originated from nano-sized Mn<Subscript>3</Subscript>O<Subscript>4</Subscript>

By employment of nano-sized pre-prepared Mn₃O₄ as precursor, LiMn₂O₄ particles have been successfully prepared by facile solid state method and sol-gel route, respectively. And the reaction mechanism of the used precursors of Mn₃O₄ is studied. The structure, morphology, and element distribution of the as-synthesized LiMn₂O₄ samples are characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). Compared with LiMn₂O₄ synthesized by facile solid state method (SS-LMO), LiMn₂O₄ synthesized by modified sol-gel route (SG-LMO) possesses higher crystallinity, smaller average particle size (~175 nm), higher lithium chemical diffusion coefficient (1.17 × 10^?11 cm² s^?1), as well as superior electrochemical performance. For example, the cell based on SG-LMO can deliver a capacity of 85.5 mAh g^?1 at a high rate of 5 °C, and manifests 88.3% capacity retention after 100 cycles at 0.5 °C when cycling at 45 °C. The good electrochemical performance of the cell based on SG-LMO is ascribed mainly to its small particle size, high degree of dispersion, and uniform element distribution in bulk material. In addition, the lower polarization potential accelerates Li⁺ ion migration, and the lower atom location confused degree maintains integrity of crystal structure, both of which can effectively improve the rate capability and cyclability of SG-LMO.     

Large-scale synthesis of Ag<Subscript>1.8</Subscript>Mn<Subscript>8</Subscript>O<Subscript>16</Subscript> nanorods and their electrochemical lithium-storage properties

Ag_1.8Mn₈O₁₆ nanorods have been synthesized on a large scale by a facile hydrothermal route. The effects of experimental conditions including reaction time and reactant concentration on the phase and morphology of the final products were investigated systematically. The products were characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray (EDX) spectroscopy. Electrochemical lithium-storage capabilities of the as-formed nanostructured Ag_1.8Mn₈O₁₆ were also evaluated. Interestingly, the as-formed Ag_1.8Mn₈O₁₆ nanorods possess the unique one-dimensional structure and in situ silver loading, which are beneficial features for electrochemical lithium-storage applications. The results suggest their potential use as cathode materials for lithium-ion batteries.     

Fabrication and electrochemical investigation of Li<Subscript>0.5</Subscript>TiO<Subscript>2</Subscript> as anode materials for lithium ion batteries

Hexagonal and cubic Li_0.5TiO₂ particles have been fabricated through magnesiothermic reduction of Li₂TiO₃ particles in a temperature range of 600 to 640 °C. The prolonged reduction time results in lattice transition from hexagonal to cubic structure of Li_0.5TiO₂. Their microstructures, valance state, chemical composition, as well as electrochemical performance as anode candidates for lithium ion batteries have been characterized and evaluated. The hexagonal Li_0.5TiO₂ exhibits better electrochemical activity compared with the cubic one. Further, the carbon-coated hexagonal Li_0.5TiO₂ displays improved electrochemical performance with initial reversible capacity of 176.6 mAh g^?1 and excellent cyclic behavior except capacity fading in the initial 10 cycles, which demonstrate a novel anode candidate for long lifetime lithium ion batteries.     

Improved structural stability and electrochemical performance of Na<Subscript>3</Subscript>V<Subscript>2</Subscript> (PO<Subscript>4</Subscript>)<Subscript>3</Subscript> cathode material by Cr doping

Cr-doped sodium vanadium phosphate (NVP) in the form of Na₃V_2-xCr_x(PO₄)₃ (x = 0, 0.02, 0.04, 0.08, 0.10) is synthesized via a facile sol-gel route as cathode materials for sodium ion batteries. The structure and morphology of these materials are systematically characterized by x-ray diffraction (XRD), Fourier-infrared spectra (FT-IR), and scanning electron microscope (SEM). XRD analysis reveals that with the increasing amount of Cr, the crystallographic parameters show a descending trend. Electrochemical tests show that the cycle stability and the specific capacity of the sodium ion batteries can be significantly improved by doping Cr into NVP. Among all the Cr-doped cathode materials, Na₃V_1.92Cr_0.08(PO₄)₃ achieves the highest capacity of 112.2 mAh g^?1 and the capacity retention is 97.2 % after 50 cycles. Electrochemical impedance spectroscopy measurements demonstrate that Cr doping is an effective method to reduce the contact resistance of interparticles by suppressing irreversible phase transformation at low sodium contents.     

Solid state synthesis of nonstoichiometric Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> composites as visible-light photocatalyst

Nonstoichiometric Bi₂WO₆ photocatalyst with the composition of Bi_2?+?x WO_6?+?1.5x (?0.25 ≤ x ≤ 1) wa synthesized by a facile solid state reaction method. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV-vis absorption spectrum. The Bi_2.5WO_6.75 photocatalyst showed excellent visible-light-driven photocatalytic performance; nearly 100 % of RhB (10 ppm, pH?=?3?~?4) was decomposed within 25 min, which demonstrated that nonstoichiometric semiconductors could be an efficient visible-light-driven photocatalyst.     

Hexagonal-like NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> nanostructure based high-performance supercapacitor electrodes

A novel approach of double hydroxide-mediated synthesis of nickel cobaltite (NiCo₂O₄) electro-active material by the hydrothermal method is reported. The obtained NiCo₂O₄ electro-active material displays the spinel cubic phase and hexagonal-like morphology. Thermogravimetry analysis confirms the thermal stability of the electrode material. The functional groups and phase formation of NiCo₂O₄ have been confirmed by FT-IR and Raman spectral analysis. The modified NiCo₂O₄ electrode exhibits the highest specific capacitance of 767.5 F g^?1 at a current density of 0.5 A g^?1 in 3 M KOH electrolyte and excellent cyclic stability (94 % capacitance retention after 1000 cycles at a high current density of 5 A g^?1). The excellent electrochemical performance of the electrode is attributed to the hexagonal-like morphology, which contributes to the rich surface electro-active sites and easy transport pathway for the ions during the electrochemical reaction. The attractive Faradic behavior of NiCo₂O₄ electrode has been ascribed to the redox contribution of Ni²⁺/Ni³⁺ and Co²⁺/Co³⁺ metal species in the alkaline medium. The symmetrical two-electrode cell has been fabricated using the NiCo₂O₄ electro-active material with excellent electrochemical properties for supercapacitor applications.     

V<Subscript>52</Subscript>O<Subscript>64</Subscript> tetragonal superstructure of cubic vanadium monoxide with vacancies in the metal sublattice

The atom-vacancy ordering of cubic vanadium monoxide VO_1.29, which has basis cubic structure B1 and structural vacancies in the metal sublattice, has been studied using the x-ray diffraction method. It has been shown that the formation of the tetragonal (space group I4₁/amd) ordered phase V₅₂O₆₄ of cubic vanadium monoxide VO_y proceeds as a first-order phase transition through the disorder-order channel including 22 nonequivalent superstructure vectors of four stars {k ₁₀}, {k ₄}, {k ₃}, and {k ₂}. The distribution function of the vanadium atoms in the V₅₂O₆₄ tetragonal superstructure has been calculated.